This page lists 7 ignition parts for the 1956 Austin A35, across 2 part types, covering the 948cc L4 engine. Every part shows its brand, manufacturer part number and fitment notes.
On the 1956 Austin A35, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 7 listed parts are Spark Plug (5 parts) and Ignition Conversion Kit (2 parts).
Every part on this page is matched to the 948cc L4 — the only engine offered in the 1956 Austin A35.
The most listed brands for 1956 Austin A35 ignition parts are WELLS (2 parts), CHAMPION (2 parts) and ACDELCO (1 part), plus 2 more brands.
1 part on this 1956 Austin A35 page carries a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — ACDELCO R44XL (Spark Plug). Click any part number to see every vehicle that part fits.
Ignition Conversion Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS | 1A4232 | 🇺🇸 US | Lucas Distributor # DM2P4, Lobe Sensor Module, Early DM2 Distributor with 2 Piece contact Set12 Volt | View on Amazon |
| WELLS | 1A4233 | 🇺🇸 US | Lucas Distributor # DM2P4, Lobe Sensor Module, Early DM2 Distributor with 2 Piece contact Set6 Volt | View on Amazon |
This table covers the Ignition Conversion kits.
2 Ignition Conversion Kit parts for the 1956 Austin A35 come from WELLS.
Part numbers include WELLS 1A4232 and WELLS 1A4233.
Spark Plug
Summary: Notes include pre-set gaps of 0.025", 0.026" and 0.034". Replacement brands in this table include CHAMPION, ACDELCO and AUTOLITE.
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular | R44XL | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| AUTOLITE | 404 | 🇺🇸 US | Copper ResistorPre-Set Gap: 0.034" | View on Amazon |
| CHAMPION | 120 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.026" | View on Amazon |
| CHAMPION | 123 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| MOTORCRAFT | SP466 | 🇺🇸 US | Copper | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
5 Spark Plug parts for the 1956 Austin A35 come from 4 brands — CHAMPION, ACDELCO, AUTOLITE and 1 other brand. The "Popular" part is ACDELCO R44XL.
This group includes ACDELCO R44XL, AUTOLITE 404 and CHAMPION 120 and the remaining parts above.
Buying Ignition Parts for a 1956 Austin A35
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 948cc L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug and Ignition Conversion Kit .
Frequently Asked Questions
How many ignition parts fit the 1956 Austin A35?
Our catalog currently lists 7 ignition parts for the 1956 Austin A35 across 2 subcategories and 5 brands, covering the 948cc L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 1956 Austin A35?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1956 Austin A35?
Notes on this page include pre-set gaps of 0.025", 0.026" and 0.034". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1956 Austin A35 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1956 Austin A35?
Every part on this page is matched to the 948cc L4 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1956 Austin A35
Ignition Parts for Other Austin A35 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.