The 1960 Austin Mini has 31 ignition parts with verified fitment on this page — 7 part types and 13 brands, covering the 848cc L4 engine. Each part includes a manufacturer part number and application notes.
The ignition system on the 1960 Austin Mini delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. The largest groups are Spark Plug (13 parts), Ignition Coil (9 parts) and Spark Plug Wire (3 parts). The other 4 part types cover the remaining 6 parts.
The 1960 Austin Mini came with a single engine, the 848cc L4, and every part is verified against it.
13 brands supply ignition parts for the 1960 Austin Mini, led by STANDARD MOTOR PRODUCTS (6 parts), NGK (6 parts) and CHAMPION (5 parts), plus 10 more brands. Quality grades include Standard Replacement, Copper / Nickel and Economy.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1960 Austin Mini. 5 parts have it, including ACDELCO U505 (Ignition Coil) and NGK 4008 (Spark Plug). Each part number opens a page with every vehicle that part fits.
Condenser / Capacitor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | LU206T | 🇺🇸 US | T-Series | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | LU206 | 🇺🇸 US | View on Amazon |
This table covers the capacitors used in this electrical or A/C circuit.
2 Condenser / Capacitor parts for the 1960 Austin Mini come from STANDARD MOTOR PRODUCTS.
The Economy section lists 1 option from STANDARD MOTOR PRODUCTS — the catalog's value-priced group. STANDARD MOTOR PRODUCTS LU206T is listed in this group.
In the Standard Replacement grade, STANDARD MOTOR PRODUCTS supplies 1 part: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS LU206.
Listed part numbers: STANDARD MOTOR PRODUCTS LU206T and STANDARD MOTOR PRODUCTS LU206.
Distributor Rotor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | LU300 | 🇺🇸 US | View on Amazon |
This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.
One part is listed for the 1960 Austin Mini — STANDARD MOTOR PRODUCTS LU300.
Ignition Breaker Points
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FACET | 14683MHDV | 🇺🇸 US | View on Amazon | |
| STANDARD MOTOR PRODUCTS | LU1617P | 🇺🇸 US | View on Amazon |
This table covers the breaker points in a points-type distributor.
2 Ignition Breaker Points parts for the 1960 Austin Mini come from 2 brands — FACET and STANDARD MOTOR PRODUCTS.
This group includes FACET 14683MHDV and STANDARD MOTOR PRODUCTS LU1617P.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP | UC15F | 🇺🇸 US | Alternate Replacement Part | View on Amazon |
| HOLSTEIN | 2IGC0058 | 🇺🇸 US | View on Amazon | |
| STANDARD MOTOR PRODUCTS | UC15T | 🇺🇸 US | T-Series | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular | U505 | 🇺🇸 US 🇨🇦 CA | Professional | View on Amazon |
| WELLS Popular | 5C1026 | 🇺🇸 US | Requires External Resistor: YES | View on Amazon |
| NGK | 48863 | 🇺🇸 US | Internal Resistor CoilConnections May be Eyelet or Spade | View on Amazon |
| STANDARD MOTOR PRODUCTS | UC15 | 🇺🇸 US | View on Amazon | |
| UNITED MOTOR PRODUCTS | C15 | 🇺🇸 US | View on Amazon | |
| WELLS | 5C1019 | 🇺🇸 US | Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
9 Ignition Coil parts for the 1960 Austin Mini come from 7 brands — STANDARD MOTOR PRODUCTS, WELLS, FVP and 4 other brands. The "Popular" part is ACDELCO U505.
The Economy section: 3 options from FVP, HOLSTEIN and STANDARD MOTOR PRODUCTS. FVP UC15F is listed in this group.
Standard Replacement: 6 parts, from WELLS, ACDELCO, NGK and 2 other brands. A representative part number is ACDELCO U505.
This group includes ACDELCO U505, FVP UC15F and HOLSTEIN 2IGC0058 and the remaining parts above.
Ignition Conversion Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS | 1A4153 | 🇺🇸 US | Lucas Distributor # DM2P4, Late DM2 Distributor12 Volt | View on Amazon |
This table covers the Ignition Conversion kits.
One part is listed for the 1960 Austin Mini — WELLS 1A4153.
Spark Plug
Summary: Notes include pre-set gaps of 0.024", 0.025", 0.03", 0.032", 0.035", 0.036" and 0.040". Replacement brands in this table include NGK, CHAMPION and ACDELCO.
Copper / Nickel
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NGK Popular | 4008 | 🇺🇸 US | StandardPre-Set Gap: 0.032" | View on Amazon |
| ACDELCO | R42XLS | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| CHAMPION | 415 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.032" | View on Amazon |
| CHAMPION | 300 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.032" | View on Amazon |
| CHAMPION | 4151 | 🇺🇸 US | Copper PlusClassification: Champion Copper Plus Small Engine | View on Amazon |
| NGK | 6427 | 🇺🇸 US | V-PowerPre-Set Gap: 0.032" | View on Amazon |
| NGK | 7131 | 🇺🇸 US | StandardPre-Set Gap: 0.036" | View on Amazon |
Double Platinum (lasts up to 3x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO | 41804 | 🇺🇸 US 🇨🇦 CA | ProfessionalDouble Platinum | View on Amazon |
| CHAMPION | 7415 | 🇺🇸 US | Double Platinum PowerPre-Set Gap: 0.032" | View on Amazon |
Iridium (lasts up to 4x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NGK Popular | 6637 | 🇺🇸 US | Iridium IXPre-Set Gap: 0.032" | View on Amazon |
| CHAMPION | 9804 | 🇺🇸 US | IridiumPre-Set Gap: 0.03" | View on Amazon |
| SKP | SP1041 | 🇺🇸 US | Tapered Ground Electrode with Platinum Chip | View on Amazon |
Platinum (lasts up to 2x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NGK Popular | 7084 | 🇺🇸 US | G-PowerPre-Set Gap: 0.040" | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
13 Spark Plug parts are listed for the 1960 Austin Mini, from NGK, CHAMPION, ACDELCO and 1 other brand. NGK 4008 carries the "Popular" badge.
In the Copper / Nickel grade, NGK, CHAMPION and ACDELCO supply 7 parts: grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. A representative part number is NGK 4008.
In the Double Platinum (lasts up to 3x longer than Copper / Nickel) grade, ACDELCO and CHAMPION supply 2 parts: grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 41804.
The Iridium (lasts up to 4x longer than Copper / Nickel) section lists 3 options from NGK, CHAMPION and SKP — grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. NGK 6637 is listed in this group.
In the Platinum (lasts up to 2x longer than Copper / Nickel) grade, NGK supplies 1 part: grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is NGK 7084.
Spark Plug Wire
High Performance (Lowest Resistance)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| B&B | R410028224 | 🇺🇸 US | OML: The Platinum Racing Wire | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DENSO | 6714001 | 🇺🇸 US | Spark Plug Wire Set7mm | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WALKER PRODUCTS | 9241010 | 🇺🇸 US | Direct FitSet | View on Amazon |
This table covers the Spark Plug wires.
3 Spark Plug Wire parts for the 1960 Austin Mini come from 3 brands — B&B, DENSO and WALKER PRODUCTS.
The High Performance (Lowest Resistance) section lists 1 option from B&B — engineered beyond original-equipment specification. B&B R410028224 is listed in this group.
In the Premium grade, DENSO supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is DENSO 6714001.
Standard Replacement: 1 part, from WALKER PRODUCTS. A representative part number is WALKER PRODUCTS 9241010.
Part numbers include B&B R410028224, DENSO 6714001 and WALKER PRODUCTS 9241010.
Buying Ignition Parts for a 1960 Austin Mini
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 848cc L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug and Ignition Coil .
Frequently Asked Questions
How many ignition parts fit the 1960 Austin Mini?
Our catalog currently lists 31 ignition parts for the 1960 Austin Mini across 7 subcategories and 13 brands, covering the 848cc L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 1960 Austin Mini?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1960 Austin Mini?
Notes on this page include pre-set gaps of 0.024", 0.025", 0.03", 0.032", 0.035", 0.036" and 0.040". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1960 Austin Mini was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1960 Austin Mini?
Every part on this page is matched to the 848cc L4 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1960 Austin Mini
Ignition Parts for Other Austin Mini Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.