The 1961 Austin Cambridge has 11 ignition parts with verified fitment on this page — 3 part types and 8 brands, covering the 1.5L L4 engine. Each part includes a manufacturer part number and application notes.
On the 1961 Austin Cambridge, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 11 listed parts are Spark Plug (5 parts), Spark Plug Wire (5 parts) and Ignition Conversion Kit (1 part).
The 1961 Austin Cambridge came with a single engine, the 1.5L L4, and every part is verified against it.
8 brands supply ignition parts for the 1961 Austin Cambridge, led by CHAMPION (2 parts), STANDARD MOTOR PRODUCTS (2 parts) and UNITED MOTOR PRODUCTS (2 parts), plus 5 more brands. Quality grades include Standard Replacement, High Performance and Premium.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1961 Austin Cambridge. 2 parts have it, including ACDELCO R44XL (Spark Plug) and STANDARD MOTOR PRODUCTS 23400 (Spark Plug Wire). Each part number opens a page with every vehicle that part fits.
Ignition Conversion Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS | 1A4153 | 🇺🇸 US | Lucas Distributor # DM2P4, Late DM2 Distributor12 Volt | View on Amazon |
This table covers the Ignition Conversion kits.
One part is listed for the 1961 Austin Cambridge — WELLS 1A4153.
Spark Plug
Summary: Notes include pre-set gaps of 0.025", 0.026" and 0.034". Replacement brands in this table include CHAMPION, ACDELCO and AUTOLITE.
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular | R44XL | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| AUTOLITE | 404 | 🇺🇸 US | Copper ResistorPre-Set Gap: 0.034" | View on Amazon |
| CHAMPION | 120 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.026" | View on Amazon |
| CHAMPION | 123 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| MOTORCRAFT | SP466 | 🇺🇸 US | Copper | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
5 Spark Plug parts are listed for the 1961 Austin Cambridge, from CHAMPION, ACDELCO, AUTOLITE and 1 other brand. ACDELCO R44XL carries the "Popular" badge.
This group includes ACDELCO R44XL, AUTOLITE 404 and CHAMPION 120 and the remaining parts above.
Spark Plug Wire
High Performance (Lowest Resistance)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| B&B | R410028224 | 🇺🇸 US | OML: The Platinum Racing Wire | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | 3400 | 🇺🇸 US | SetCore Material: Suppression Core | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular | 23400 | 🇺🇸 US | Pro SeriesSet | View on Amazon |
| UNITED MOTOR PRODUCTS | 641 | 🇺🇸 US | Permashield-DelcoreSet | View on Amazon |
| UNITED MOTOR PRODUCTS | 640 | 🇺🇸 US | Set | View on Amazon |
This table covers the Spark Plug wires.
5 Spark Plug Wire parts for the 1961 Austin Cambridge come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and B&B. The "Popular" part is STANDARD MOTOR PRODUCTS 23400.
The High Performance (Lowest Resistance) section lists 1 option from B&B — engineered beyond original-equipment specification. B&B R410028224 is listed in this group.
In the Premium grade, STANDARD MOTOR PRODUCTS supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is STANDARD MOTOR PRODUCTS 3400.
In the Standard Replacement grade, UNITED MOTOR PRODUCTS and STANDARD MOTOR PRODUCTS supply 3 parts: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS 23400.
Part numbers include STANDARD MOTOR PRODUCTS 23400, B&B R410028224 and STANDARD MOTOR PRODUCTS 3400, among others listed above.
Buying Ignition Parts for a 1961 Austin Cambridge
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 1.5L L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug and Spark Plug Wire .
Frequently Asked Questions
How many ignition parts fit the 1961 Austin Cambridge?
Our catalog currently lists 11 ignition parts for the 1961 Austin Cambridge across 3 subcategories and 8 brands, covering the 1.5L L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 1961 Austin Cambridge?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1961 Austin Cambridge?
Notes on this page include pre-set gaps of 0.025", 0.026" and 0.034". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1961 Austin Cambridge was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1961 Austin Cambridge?
Every part on this page is matched to the 1.5L L4 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1961 Austin Cambridge
Ignition Parts for Other Austin Cambridge Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.