1964 Austin Mini Engine Parts

Engine:
848cc L4

19 Engine parts are listed for the 1964 Austin Mini, in 12 part types, covering the 848cc L4 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 1964 Austin Mini, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Valve Cover Gasket (4 parts), Oil Filter (3 parts) and Crankshaft Seal (2 parts). The other 9 part types cover the remaining 10 parts.

Camshaft Bearing

Brand Part Number Markets Notes Buy
DURA-BOND BL1
🇺🇸 US
Engine Code 85H or Engine Code 8AM
View on
Amazon

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Connecting Rod Bearing

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE CB488P
🇺🇸 US
P Series (Tri-Metal)Pair
View on
Amazon

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
AJUSA 54031300
🇺🇸 US
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Seal

Brand Part Number Markets Notes Buy
AJUSA 15015900
🇺🇸 US
Front38 X 58.9 X 8.3/9.5
Fitment notes — AJUSA 15015900
Front38 X 58.9 X 8.3/9.5Clockwise
View on
Amazon
AJUSA 15026900
🇺🇸 US
RearCounter Clockwise
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
AJUSA 10012800
🇺🇸 US
68 Bore Diameter
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
AJUSA 52000100
🇺🇸 US
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA 50062300
🇺🇸 US
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Intake & Exhaust Manifold Gasket Set

Brand Part Number Markets Notes Buy
AJUSA 13005400
🇺🇸 US
View on
Amazon

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Oil Filter

Brand Part Number Markets Notes Buy
HASTINGS / BALDWIN LF187
🇺🇸 US
View on
Amazon
MANN H8131X
🇺🇸 US
View on
Amazon
WIX 51184
🇺🇸 US
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
AJUSA 59000100
🇺🇸 US
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
AJUSA 11005900
🇺🇸 US
View on
Amazon
FEL-PRO VS21507
🇺🇸 US
View on
Amazon
MAHLE / CLEVITE VS30025
🇺🇸 US
Cork-Rubber
View on
Amazon
VICTOR REINZ 151043701
🇺🇸 US
Set
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Stem Seal

Brand Part Number Markets Notes Buy
AJUSA 12000100
🇺🇸 US
6 x 10 x 12
View on
Amazon
AJUSA 57000100
🇺🇸 US
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 1964 Austin Mini

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Confirm you have the 848cc L4 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Valve Cover Gasket and Oil Filter .

Frequently Asked Questions

How many engine parts fit the 1964 Austin Mini?

Our catalog currently lists 19 engine parts for the 1964 Austin Mini across 12 subcategories and 8 brands, covering the 848cc L4 engine. Each part is matched to the engine(s) it fits.

What are the signs of engine problems on a 1964 Austin Mini?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1964 Austin Mini was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1964 Austin Mini?

Every part on this page is matched to the 848cc L4 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1964 Austin Mini

Engine Parts for Other Austin Mini Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.