1975 Austin Marina Engine Parts

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1975 Austin Marina — DURA-BOND DA2.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Connecting Rod Bearing parts are listed for the 1975 Austin Marina, from KING ENGINE BEARINGS and MAHLE / CLEVITE.

Part numbers include KING ENGINE BEARINGS CR4403AM and MAHLE / CLEVITE CB792P.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts are listed for the 1975 Austin Marina, from AJUSA, MAHLE / CLEVITE and VICTOR REINZ.

This group includes AJUSA 54031800, MAHLE / CLEVITE CS3614 and VICTOR REINZ 081133401.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: KING ENGINE BEARINGS MB520AM.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Crankshaft Seal parts for the 1975 Austin Marina come from AJUSA.

This group includes AJUSA 15015900 and AJUSA 15038800.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts are listed for the 1975 Austin Marina, from AJUSA, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Part numbers include AJUSA 10023200, FEL-PRO 21183C and MAHLE / CLEVITE 3614, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts are listed for the 1975 Austin Marina, from AJUSA, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: AJUSA 52055600, MAHLE / CLEVITE HS3614W and VICTOR REINZ 021091801.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 1975 Austin Marina — AJUSA 50062900.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

5 Expansion Plug parts are listed for the 1975 Austin Marina, from PIONEER and DORMAN. DORMAN 565030 carries the "Popular" badge.

Listed part numbers: DORMAN 565030, DORMAN 555030 and PIONEER PE143, plus the other parts above.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Intake & Exhaust Manifold Gasket Set parts are listed for the 1975 Austin Marina, from AJUSA, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

This group includes AJUSA 13017700, FEL-PRO MS22506B and MAHLE / CLEVITE MS15234 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1975 Austin Marina — AJUSA 18000900.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

10 Oil Filter parts for the 1975 Austin Marina come from 8 brands — BOSCH, VARIOUS MFR, MOBIL and 5 other brands. The "Popular" part is MOBIL M1204A.

The Economy section lists 2 options from BOSCH and VARIOUS MFR — the catalog's value-priced group. BOSCH 72137WS is listed in this group.

The High Performance / Heavy Duty section lists 1 option from MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1204A is listed in this group.

In the Standard Replacement grade, MOTORCRAFT, ACDELCO, BECK/ARNLEY and 4 other brands supply 7 parts: built to original-equipment specification. A representative part number is MOTORCRAFT FL300.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Pan Gasket parts for the 1975 Austin Marina come from 3 brands — AJUSA, FEL-PRO and VICTOR REINZ.

This group includes AJUSA 14041100, FEL-PRO OS20011 and VICTOR REINZ 711525600.

This table covers the Thrust washers. Read more

This group shows a single part: KING ENGINE BEARINGS TW216AM.

This table covers the Timing Belt pulleys. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt. Read more

2 Timing Belt Pulley parts for the 1975 Austin Marina come from BECK/ARNLEY.

Listed part numbers: BECK/ARNLEY 0513860 and BECK/ARNLEY 0513954.

This table covers the timing chains that keep the cams in time with the crank. Read more

2 Timing Chain parts are listed for the 1975 Austin Marina, from INA and S.A. GEAR.

Listed part numbers: INA ZC94009 and S.A. GEAR 3SR52.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts for the 1975 Austin Marina come from 5 brands — FEL-PRO, AJUSA, BECK/ARNLEY and 2 other brands. The "Popular" part is FEL-PRO VS215091.

This group includes FEL-PRO VS215091, AJUSA 11016000 and BECK/ARNLEY 0360081 and the remaining parts above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Valve Stem Seal parts for the 1975 Austin Marina come from AJUSA.

Listed part numbers: AJUSA 16001000 and AJUSA 57001100.