1969 Avanti Ii Engine Parts

This table covers the Bolt kits. Read more

ARP supplies the 4 Bolt Kit parts for the 1969 Avanti Ii. All of them fit every engine offered in the 1969 Ii.

Listed part numbers: ARP 5349701, ARP 5349801 and ARP 5349601, plus the other parts above.

This table covers the Camshaft bolts. Read more

This group shows a single part: ARP 1341001.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE 49328.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

KING ENGINE BEARINGS supplies the 11 Connecting Rod Bearing parts for the 1969 Avanti Ii. KING ENGINE BEARINGS CR807XPN carries the "Popular" badge. All of them fit every engine offered in the 1969 Ii.

In the High Performance grade, KING ENGINE BEARINGS supplies 6 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR807XPN.

The Standard Replacement section lists 3 options from KING ENGINE BEARINGS — built to original-equipment specification. KING ENGINE BEARINGS CR807SI is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the Connecting Rod bolts. Read more

2 Connecting Rod Bolt parts for the 1969 Avanti Ii come from ARP.

This group includes ARP 1346001 and ARP 1346003.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts are listed for the 1969 Avanti Ii, from APEX, ENGINE PRO, FEL-PRO and 2 other brands. APEX ACS3022 carries the "Popular" badge. All of them fit every engine offered in the 1969 Ii.

Part numbers include APEX ACS3022, ENGINE PRO 3777332 and FEL-PRO CS77332, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Crankshaft Main Bearing parts for the 1969 Avanti Ii come from KING ENGINE BEARINGS. The "Popular" part is KING ENGINE BEARINGS MB557XP. Every part fits both the 5.3L 327cid V8 and the 5.7L 350cid V8.

The High Performance section: 6 options from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB557XP is listed in this group.

Standard Replacement: 1 part, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB557SI.

Part numbers include KING ENGINE BEARINGS MB557XP, KING ENGINE BEARINGS MB557HP and KING ENGINE BEARINGS MB557HPX, among others listed above.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

ARP supplies both parts for the 1969 Avanti Ii. All of them fit every engine offered in the 1969 Ii.

Listed part numbers: ARP 1345401 and ARP 1345601.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

2 Crankshaft Repair Sleeve parts for the 1969 Avanti Ii come from 2 brands — NATIONAL and WJB / INMOTION PARTS. Every part fits both the 5.3L 327cid V8 and the 5.7L 350cid V8.

Part numbers include NATIONAL 99176 and WJB / INMOTION PARTS WS99176.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Crankshaft Seal parts for the 1969 Avanti Ii come from 9 brands — FEL-PRO, NATIONAL, SCHAEFFLER and 6 other brands. The "Popular" part is FEL-PRO BS40013. 12 parts fit every engine; the other 2 are engine-specific.

This table covers the bolts that clamp the cylinder head to the block. Read more

9 Cylinder Head Bolt parts are listed for the 1969 Avanti Ii, from ARP, FEL-PRO, APEX and 2 other brands. ARP 1343601 carries the "Popular" badge. All of them fit every engine offered in the 1969 Ii.

Listed part numbers: ARP 1343601, FEL-PRO ES72856 and APEX AHB322, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Cylinder Head Gasket parts are listed for the 1969 Avanti Ii, from FEL-PRO, MAHLE / CLEVITE, APEX and 2 other brands. FEL-PRO 7733SH1 carries the "Popular" badge. 8 parts fit every engine; the other 3 are engine-specific.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Cylinder Head Gasket Set parts are listed for the 1969 Avanti Ii, from FEL-PRO, MAHLE / CLEVITE, APEX and 1 other brand. APEX AHS3022 carries the "Popular" badge. 7 parts fit every engine; the other 1 is engine-specific.

Part numbers include APEX AHS3022, FEL-PRO HS7733PT2 and FEL-PRO HS7733SH2, among others listed above.

This table covers the Cylinder Head Spacer shims. Read more

One part is listed for the 1969 Avanti Ii — VICTOR REINZ 711382900.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Engine Kit Gasket Set parts are listed for the 1969 Avanti Ii, from ENGINE PRO, FEL-PRO, MAHLE / CLEVITE and 2 other brands. FEL-PRO FS7733PT2 carries the "Popular" badge. 6 parts fit every engine; the other 3 are engine-specific.

This group includes FEL-PRO FS7733PT2, FEL-PRO FS7733SH2 and MAHLE / CLEVITE 953033 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

ENGINE PRO supplies the 6 Harmonic Balancer parts for the 1969 Avanti Ii. ENGINE PRO PB2221ST carries the "Popular" badge. All of them fit every engine offered in the 1969 Ii.

Part numbers include ENGINE PRO PB2221ST, ENGINE PRO PB1012ST and ENGINE PRO PB1046ST, among others listed above.

This table covers the Harmonic Balancer bolts. Read more

3 Harmonic Balancer Bolt parts for the 1969 Avanti Ii come from ARP. Every part fits both the 5.3L 327cid V8 and the 5.7L 350cid V8.

Part numbers include ARP 4306801, ARP 1342501 and ARP 2342501.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

5 Harmonic Balancer Repair Sleeve parts for the 1969 Avanti Ii come from 4 brands — NATIONAL, FEL-PRO, MAHLE / CLEVITE and 1 other brand. The "Popular" part is NATIONAL 88176. Every part fits both the 5.3L 327cid V8 and the 5.7L 350cid V8.

Listed part numbers: NATIONAL 88176, FEL-PRO 16202 and MAHLE / CLEVITE A228, plus the other parts above.

This table covers the Intake Manifold bolts. Read more

ARP supplies the 4 Intake Manifold Bolt parts for the 1969 Avanti Ii. All of them fit every engine offered in the 1969 Ii.

This group includes ARP 1342001, ARP 1342101 and ARP 4342001 and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts are listed for the 1969 Avanti Ii, from VICTOR REINZ, FEL-PRO, APEX and 1 other brand. FEL-PRO MS903142 carries the "Popular" badge. All of them fit every engine offered in the 1969 Ii.

This group includes FEL-PRO MS903142, APEX AMS3221 and MAHLE / CLEVITE MS15315 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts are listed for the 1969 Avanti Ii, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. 2 parts fit every engine; the other 1 is engine-specific.

This group includes FEL-PRO 70822, MAHLE / CLEVITE 2051 and VICTOR REINZ 711346200.

This table covers the Oil Pan bolts. Read more

5 Oil Pan Bolt parts for the 1969 Avanti Ii come from ARP. The "Popular" part is ARP 2341802. Every part fits both the 5.3L 327cid V8 and the 5.7L 350cid V8.

Listed part numbers: ARP 2341802, ARP 4341802 and ARP 2341901, plus the other parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Oil Pan Gasket parts for the 1969 Avanti Ii come from 4 brands — FEL-PRO, MAHLE / CLEVITE, VICTOR REINZ and 1 other brand. The "Popular" part is FEL-PRO OS5197C2. Every part fits both the 5.3L 327cid V8 and the 5.7L 350cid V8.

This table covers the Oil Pump shafts. Read more

This group shows a single part: ARP 1347901.

This table covers the Oil Pump Shaft Guide retainers. Read more

3 Oil Pump Shaft Guide / Retainer parts are listed for the 1969 Avanti Ii, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. All of them fit every engine offered in the 1969 Ii.

This group includes FEL-PRO 72665, MAHLE / CLEVITE H31354 and VICTOR REINZ 711403800.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

SILV-O-LITE supplies the 11 Piston parts for the 1969 Avanti Ii. SILV-O-LITE 3437HC carries the "Popular" badge.

The Premium section lists 3 options from SILV-O-LITE — a step above OE specification in materials, tolerances or warranty terms. SILV-O-LITE 3437HC is listed in this group.

The Standard Replacement section: 6 options from SILV-O-LITE. SILV-O-LITE 1479H is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the rings that seal each piston to the cylinder wall. Read more

MAHLE / CLEVITE supplies the 4 Piston Ring parts for the 1969 Avanti Ii.

The Premium section: 2 options from MAHLE / CLEVITE. MAHLE / CLEVITE S40564CP is listed in this group.

The Standard Replacement section: 2 options from MAHLE / CLEVITE. MAHLE / CLEVITE S50564CP is listed in this group.

Listed part numbers: MAHLE / CLEVITE S40564CP, MAHLE / CLEVITE 40564CP and MAHLE / CLEVITE S50564CP, plus the other parts above.

This table covers the Rocker Arm studs. Read more

4 Rocker Arm Stud parts for the 1969 Avanti Ii come from ARP. Every part fits both the 5.3L 327cid V8 and the 5.7L 350cid V8.

Part numbers include ARP 1347103, ARP 1347104 and ARP 1347101, among others listed above.

This table covers the Timing Camshaft Gear bolts. Read more

One part is listed for the 1969 Avanti Ii — ARP 2341001.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Timing Cover Gasket parts for the 1969 Avanti Ii come from 4 brands — MAHLE / CLEVITE, FEL-PRO, VICTOR REINZ and 1 other brand. The "Popular" part is FEL-PRO TCS51241. 5 parts fit every engine; the other 4 are engine-specific.

Part numbers include FEL-PRO TCS51241, MAHLE / CLEVITE T27781 and APEX ATC3220, among others listed above.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

2 Timing Cover Repair Sleeve parts for the 1969 Avanti Ii come from SKF. Every part fits both the 5.3L 327cid V8 and the 5.7L 350cid V8.

This group includes SKF 480177 and SKF 99176.

This table covers the Timing Cover Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

This group shows a single part: FEL-PRO 16312.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Timing Cover Seal parts for the 1969 Avanti Ii come from 3 brands — MAHLE / CLEVITE, SKF and VICTOR REINZ. 2 parts fit every engine; the other 2 are engine-specific.

Part numbers include MAHLE / CLEVITE 65022, MAHLE / CLEVITE 49328 and SKF 17286, among others listed above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

16 Valve Cover Gasket parts for the 1969 Avanti Ii come from 5 brands — FEL-PRO, MAHLE / CLEVITE, VICTOR REINZ and 2 other brands. The "Popular" part is FEL-PRO VS12869T. 15 parts fit every engine; the other 1 is engine-specific.

Premium: 3 parts, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. A representative part number is FEL-PRO VS12869T.

Standard Replacement: 13 parts, from FEL-PRO, MAHLE / CLEVITE, VICTOR REINZ and 2 other brands. A representative part number is FEL-PRO VS12869.

This table covers the Valve Cover Load spreaders. Read more

3 Valve Cover Load Spreader parts are listed for the 1969 Avanti Ii, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. All of them fit every engine offered in the 1969 Ii.

Part numbers include FEL-PRO ES72676, MAHLE / CLEVITE GS33825 and VICTOR REINZ 181003401.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Valve Stem Seal parts for the 1969 Avanti Ii come from 4 brands — MAHLE / CLEVITE, FEL-PRO, VICTOR REINZ and 1 other brand. The "Popular" part is FEL-PRO SS5112. 7 parts fit every engine; the other 1 is engine-specific.

This group includes FEL-PRO SS5112, FEL-PRO SS10058 and APEX AVS3022 and the remaining parts above.