1982 Avanti Ii Automatic Transmission Parts

This table covers the apply bands inside the automatic transmission. Read more

4 Band parts are listed for the 1982 Avanti Ii, from ATP and PIONEER.

This group includes ATP JX58, ATP JX60 and PIONEER 767043 and the remaining parts above.

This table covers the Boost valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

TRANSGO supplies the 4 Boost Valve parts for the 1982 Avanti Ii.

Part numbers include TRANSGO 7500, TRANSGO 7472 and TRANSGO 7300, among others listed above.

This table covers the bushings in this assembly. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DURA-BOND GMT31A.

This table covers the Bushing kits. Read more

5 Bushing Kit parts for the 1982 Avanti Ii come from DURA-BOND.

This group includes DURA-BOND TK53, DURA-BOND TK53EK and DURA-BOND TK53HP and the remaining parts above.

This table covers the Case bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DURA-BOND 2272.

This table covers the Center Support bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DURA-BOND 02101.

This table covers the seals at the Dipstick / Fluid Filler Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Dipstick / Fluid Filler Tube Seal parts are listed for the 1982 Avanti Ii, from ATP and PIONEER.

This group includes ATP SO35, ATP JO16 and PIONEER 762008 and the remaining parts above.

This table covers the Extension Housing bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Extension Housing Bushing parts for the 1982 Avanti Ii come from DURA-BOND.

Listed part numbers: DURA-BOND GMT32 and DURA-BOND GMT32T.

This table covers the wear sleeves used to restore a Extension Housing seal surface. Read more

One part is listed for the 1982 Avanti Ii — SKF 480150.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Extension Housing Seal parts are listed for the 1982 Avanti Ii, from NATIONAL, TIMKEN, BCA and 1 other brand. NATIONAL 9613S carries the "Popular" badge.

Listed part numbers: NATIONAL 9613S and BCA NS9613S, plus the other parts above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

8 Filter parts for the 1982 Avanti Ii come from 2 brands — ATP and VARIOUS MFR. The "Popular" part is ATP TF29.

The Economy section lists 5 options from ATP and VARIOUS MFR — the catalog's value-priced group. ATP TF29 is listed in this group.

In the Standard Replacement grade, ATP supplies 3 parts: built to original-equipment specification. A representative part number is ATP B37.

Listed part numbers: ATP TF29, ATP TF37 and ATP TF64, plus the other parts above.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Fluid Pan Gasket parts for the 1982 Avanti Ii come from 3 brands — MAHLE / CLEVITE, FEL-PRO and VICTOR REINZ. The "Popular" part is FEL-PRO TOS18633.

Listed part numbers: FEL-PRO TOS18633, FEL-PRO TOS18621 and FEL-PRO TOS18662, plus the other parts above.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

5 Fluid Pump Bushing parts for the 1982 Avanti Ii come from DURA-BOND. The "Popular" part is DURA-BOND 61005T.

Listed part numbers: DURA-BOND 61005T, DURA-BOND 61005 and DURA-BOND 44034, plus the other parts above.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

5 Fluid Pump Repair Sleeve parts are listed for the 1982 Avanti Ii, from NATIONAL, WJB / INMOTION PARTS and BCA. NATIONAL 99187 carries the "Popular" badge.

Part numbers include NATIONAL 99187, BCA NS88187 and NATIONAL 99174, among others listed above.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Fluid Pump Seal parts are listed for the 1982 Avanti Ii, from NATIONAL, BCA, SKF and 1 other brand. NATIONAL 6712NA carries the "Popular" badge.

This group includes NATIONAL 6712NA, NATIONAL 4950 and BCA NS6712NA and the remaining parts above.

This table covers the governors and modulators that control transmission shift pressure. Read more

6 Governor / Modulator parts for the 1982 Avanti Ii come from 4 brands — ROSTRA, ATP, PIONEER and 1 other brand. The "Popular" part is ATP JX76.

Part numbers include ATP JX76, PIONEER 747024 and ROSTRA 510017, among others listed above.

This table covers the Kickdown solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 1982 Avanti Ii — ROSTRA 520604.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Manual Shaft Seal parts are listed for the 1982 Avanti Ii, from BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS8792S, NATIONAL 8792S and WJB / INMOTION PARTS WS8792S.

This table covers the Output Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1982 Avanti Ii — DURA-BOND 8624988.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Output Shaft Seal parts for the 1982 Avanti Ii come from 3 brands — ACDELCO, SCHAEFFLER and SKF. The "Popular" part is SKF 15041.

This group includes SKF 15041, ACDELCO 9613S and ACDELCO 5200 and the remaining parts above.

This table covers the rebuild kits for this assembly. Read more

5 Rebuild Kit parts are listed for the 1982 Avanti Ii, from PIONEER, ATP and TRANSTEC. PIONEER 753024 carries the "Popular" badge.

In the Deluxe Kit (Master Kit + Filter, Band & Common Bushings) grade, PIONEER supplies 1 part: grouped under the catalog's "Deluxe Kit (Master Kit + Filter, Band & Common Bushings)" designation — the notes column spells out what sets them apart. A representative part number is PIONEER 753024.

The Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) section lists 3 options from ATP and PIONEER — grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. ATP CMS21 is listed in this group.

In the Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) grade, TRANSTEC supplies 1 part: grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. A representative part number is TRANSTEC 81000348.

Part numbers include PIONEER 753024, ATP CMS21 and ATP JMS9, among others listed above.

This table covers the wear sleeves used to restore a grooved seal surface. Read more

One part is listed for the 1982 Avanti Ii — SKF 99174.

This table covers the Shift Improvement kits. Read more

9 Shift Improvement Kit parts for the 1982 Avanti Ii come from TRANSGO. The "Popular" part is TRANSGO SK400.

In the Daily Driver grade, TRANSGO supplies 3 parts: grouped for everyday commuting duty. A representative part number is TRANSGO SK400.

The High Performance section lists 6 options from TRANSGO — engineered beyond original-equipment specification. TRANSGO 35012 is listed in this group.

This group includes TRANSGO SK400, TRANSGO SK350 and TRANSGO SK2004R and the remaining parts above.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Shift Shaft Seal parts are listed for the 1982 Avanti Ii, from ACDELCO, SCHAEFFLER and TIMKEN.

Part numbers include ACDELCO 8792S and SCHAEFFLER SS2114, among others listed above.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 1982 Avanti Ii — PA CARGO K77929U.

This table covers the Stator Support Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

3 Stator Support Shaft Bushing parts for the 1982 Avanti Ii come from DURA-BOND.

Listed part numbers: DURA-BOND 02399, DURA-BOND 02399T and DURA-BOND 8623944.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

5 Torque Converter parts for the 1982 Avanti Ii come from TC REMANUFACTURING. The "Popular" part is TC REMANUFACTURING B35.

Part numbers include TC REMANUFACTURING B35, TC REMANUFACTURING B3M and TC REMANUFACTURING B3, among others listed above.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

4 Torque Converter Clutch Solenoid parts for the 1982 Avanti Ii come from 3 brands — ATP, PIONEER and ROSTRA.

This group includes ATP CE1, ATP SE1 and PIONEER 771003 and the remaining parts above.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

3 Torque Converter Repair Sleeve parts are listed for the 1982 Avanti Ii, from TIMKEN and SCHAEFFLER.

Listed part numbers: SCHAEFFLER SR3496, TIMKEN KWK99187 and TIMKEN KWK99174.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

TIMKEN supplies both parts for the 1982 Avanti Ii.

Part numbers include TIMKEN 6712NA and TIMKEN 4950.

This table covers the conditioners and additives used with this transmission fluid. Read more

7 Transmission Fluid Additive parts for the 1982 Avanti Ii come from 2 brands — LUBEGARD and ATP. The "Popular" part is LUBEGARD 19610.

Part numbers include LUBEGARD 19610, LUBEGARD 60902 and ATP AT202, among others listed above.