4 Engine parts are listed for the 1980 Bentley T2 Series, in 1 part type, covering both the 6.7L V8 and the 6.8L V8. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 1980 Bentley T2 Series, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Every listed part is an Oil Filter.
The 1980 Bentley T2 Series was sold with both the 6.7L V8 and the 6.8L V8. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
3 brands supply engine parts for the 1980 Bentley T2 Series, led by FAMOUS BRAND (2 parts), VARIOUS MFR (1 part) and HASTINGS / BALDWIN (1 part). Quality grades include Economy and Standard Replacement.
Each part number listed for the 1980 Bentley T2 Series opens a page with every vehicle that part fits.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FAMOUS BRAND Fits: 6.8L V8 | 85768 | 🇺🇸 US 🇨🇦 CA | without Fuel InjectionOE Number : UE40893 | View on Amazon |
| VARIOUS MFR Fits: 6.8L V8 | PG381 | 🇺🇸 US 🇨🇦 CA | Spin-On | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HASTINGS / BALDWIN Fits: 6.8L V8 | LF404 | 🇺🇸 US 🇨🇦 CA | Spin-On | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FAMOUS BRAND Fits: 6.7L V8 | 85768 | 🇺🇸 US 🇨🇦 CA | without Fuel InjectionOE Number : UE40893 | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
4 Oil Filter parts for the 1980 Bentley T2 Series come from 3 brands — FAMOUS BRAND, VARIOUS MFR and HASTINGS / BALDWIN.
The Economy section lists 2 options from FAMOUS BRAND and VARIOUS MFR — the catalog's value-priced group. FAMOUS BRAND 85768 is listed in this group.
In the Standard Replacement grade, HASTINGS / BALDWIN supplies 1 part: built to original-equipment specification. A representative part number is HASTINGS / BALDWIN LF404.
1 further part sits outside the graded sections, with the same engine-level match.
Listed part numbers: FAMOUS BRAND 85768, VARIOUS MFR PG381 and HASTINGS / BALDWIN LF404, plus the other parts above.
Buying Engine Parts for a 1980 Bentley T2 Series
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil Filter .
Frequently Asked Questions
How many engine parts fit the 1980 Bentley T2 Series?
Our catalog currently lists 4 engine parts for the 1980 Bentley T2 Series across 1 subcategory and 3 brands, covering both the 6.7L V8 and the 6.8L V8. Each part is matched to the engine(s) it fits.
Do engine parts differ between 1980 Bentley T2 Series engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 1980 Bentley T2 Series?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1980 Bentley T2 Series was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1980 Bentley T2 Series?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1980 Bentley T2 Series
Engine Parts for Other Bentley T2 Series Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.