1986 Bentley Continental Automatic Transmission Parts

This table covers the apply bands inside the automatic transmission. Read more

4 Band parts for the 1986 Bentley Continental come from 2 brands — ATP and PIONEER.

Part numbers include ATP JX58, ATP JX60 and PIONEER 767043, among others listed above.

This table covers the Boost valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: SONNAX 400LB1.

This table covers the Bushing kits. Read more

DURA-BOND supplies both parts for the 1986 Bentley Continental.

Part numbers include DURA-BOND TK54 and DURA-BOND TK54HP.

This table covers the Case bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1986 Bentley Continental — SONNAX 34006SPB.

This table covers the Center Support bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1986 Bentley Continental — DURA-BOND 02101.

This table covers the Clutch Housing Thrust washers. Read more

One part is listed for the 1986 Bentley Continental — SONNAX 34298078.

This table covers the Clutch hubs. Read more

SONNAX supplies both parts for the 1986 Bentley Continental.

This group includes SONNAX 3432201 and SONNAX 3432202K.

This table covers the seals at the Dipstick / Fluid Filler Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Dipstick / Fluid Filler Tube Seal parts for the 1986 Bentley Continental come from 2 brands — ATP and PIONEER.

Part numbers include ATP JO16 and PIONEER 762008.

This table covers the Extension Housing bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Extension Housing Bearing parts are listed for the 1986 Bentley Continental, from WJB / INMOTION PARTS, BCA and NATIONAL.

In the Economy grade, WJB / INMOTION PARTS supplies 1 part: the catalog's value-priced group. A representative part number is WJB / INMOTION PARTS RB6009.

The Standard Replacement section lists 2 options from BCA and NATIONAL — built to original-equipment specification. BCA NB109 is listed in this group.

Listed part numbers: WJB / INMOTION PARTS RB6009, BCA NB109 and NATIONAL 109.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Extension Housing Seal parts for the 1986 Bentley Continental come from 4 brands — WJB / INMOTION PARTS, NATIONAL, BCA and 1 other brand. The "Popular" part is NATIONAL 9449.

Listed part numbers: NATIONAL 9449, BCA NS9449 and SCHAEFFLER SS2960, plus the other parts above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

3 Filter parts are listed for the 1986 Bentley Continental, from ATP and PIONEER.

Economy: 1 part, from ATP. A representative part number is ATP TF29.

The Standard Replacement section: 2 options from ATP and PIONEER. ATP B29 is listed in this group.

Part numbers include ATP TF29, ATP B29 and PIONEER 745041.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Fluid Pan Gasket parts are listed for the 1986 Bentley Continental, from MAHLE / CLEVITE, VICTOR REINZ and FEL-PRO. FEL-PRO TOS18621 carries the "Popular" badge.

Listed part numbers: FEL-PRO TOS18621, MAHLE / CLEVITE W39341 and MAHLE / CLEVITE W39341TC, plus the other parts above.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DURA-BOND supplies both parts for the 1986 Bentley Continental.

Part numbers include DURA-BOND 44034 and DURA-BOND 44034TG.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

3 Fluid Pump Repair Sleeve parts for the 1986 Bentley Continental come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS88187, NATIONAL 99187 and WJB / INMOTION PARTS WS99187.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Fluid Pump Seal parts for the 1986 Bentley Continental come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS6712NA, NATIONAL 6712NA and WJB / INMOTION PARTS WS6712NA.

This table covers the governors and modulators that control transmission shift pressure. Read more

5 Governor / Modulator parts are listed for the 1986 Bentley Continental, from ROSTRA, ATP and PIONEER. ATP JX76 carries the "Popular" badge.

This group includes ATP JX76, PIONEER 747024 and ROSTRA 510017 and the remaining parts above.

This table covers the Kickdown solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: ROSTRA 520604.

This table covers the Main shafts. Read more

This group shows a single part: SONNAX 3467205.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Manual Shaft Seal parts for the 1986 Bentley Continental come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 8792S and WJB / INMOTION PARTS WS8792S.

This table covers the Output Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DURA-BOND 8624988.

This table covers the rebuild kits for this assembly. Read more

3 Rebuild Kit parts for the 1986 Bentley Continental come from 3 brands — PIONEER, ATP and TRANSTEC.

The Deluxe Kit (Master Kit + Filter, Band & Common Bushings) section lists 1 option from PIONEER — grouped under the catalog's "Deluxe Kit (Master Kit + Filter, Band & Common Bushings)" designation — the notes column spells out what sets them apart. PIONEER 753024 is listed in this group.

In the Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) grade, ATP supplies 1 part: grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is ATP JMS9.

The Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) section lists 1 option from TRANSTEC — grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. TRANSTEC 81000348 is listed in this group.

Listed part numbers: PIONEER 753024, ATP JMS9 and TRANSTEC 81000348.

This table covers the Shift Improvement kits. Read more

TRANSGO supplies the 4 Shift Improvement Kit parts for the 1986 Bentley Continental.

The Daily Driver section lists 1 option from TRANSGO — grouped for everyday commuting duty. TRANSGO SK400 is listed in this group.

In the High Performance grade, TRANSGO supplies 3 parts: engineered beyond original-equipment specification. A representative part number is TRANSGO 40012.

Part numbers include TRANSGO SK400, TRANSGO 40012 and TRANSGO 4003, among others listed above.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Shift Shaft Seal parts for the 1986 Bentley Continental come from 2 brands — ACDELCO and SCHAEFFLER.

Listed part numbers: ACDELCO 8792S and SCHAEFFLER SS2114.

This table covers the Stator Support Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1986 Bentley Continental — DURA-BOND 8623944.