1989 Bentley Continental Automatic Transmission Parts

This table covers the apply bands inside the automatic transmission. Read more

4 Band parts are listed for the 1989 Bentley Continental, from ATP and PIONEER.

Part numbers include ATP JX58, ATP JX60 and PIONEER 767043, among others listed above.

This table covers the Boost valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 1989 Bentley Continental — SONNAX 400LB1.

This table covers the Bushing kits. Read more

2 Bushing Kit parts for the 1989 Bentley Continental come from DURA-BOND.

This group includes DURA-BOND TK54 and DURA-BOND TK54HP.

This table covers the Case bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: SONNAX 34006SPB.

This table covers the Center Support bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DURA-BOND 02101.

This table covers the Clutch Housing Thrust washers. Read more

This group shows a single part: SONNAX 34298078.

This table covers the Clutch hubs. Read more

2 Clutch Hub parts for the 1989 Bentley Continental come from SONNAX.

This group includes SONNAX 3432201 and SONNAX 3432202K.

This table covers the seals at the Dipstick / Fluid Filler Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Dipstick / Fluid Filler Tube Seal parts are listed for the 1989 Bentley Continental, from ATP and PIONEER.

Listed part numbers: ATP JO16 and PIONEER 762008.

This table covers the Extension Housing bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Extension Housing Bearing parts for the 1989 Bentley Continental come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.

The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS RB6009 is listed in this group.

In the Standard Replacement grade, BCA and NATIONAL supply 2 parts: built to original-equipment specification. A representative part number is BCA NB109.

This group includes WJB / INMOTION PARTS RB6009, BCA NB109 and NATIONAL 109.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Extension Housing Seal parts are listed for the 1989 Bentley Continental, from WJB / INMOTION PARTS, NATIONAL, BCA and 1 other brand. NATIONAL 9449 carries the "Popular" badge.

Part numbers include NATIONAL 9449, BCA NS9449 and SCHAEFFLER SS2960, among others listed above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

3 Filter parts for the 1989 Bentley Continental come from 2 brands — ATP and PIONEER.

The Economy section: 1 option from ATP. ATP TF29 is listed in this group.

Standard Replacement: 2 parts, from ATP and PIONEER. A representative part number is ATP B29.

This group includes ATP TF29, ATP B29 and PIONEER 745041.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Fluid Pan Gasket parts for the 1989 Bentley Continental come from 3 brands — MAHLE / CLEVITE, VICTOR REINZ and FEL-PRO. The "Popular" part is FEL-PRO TOS18621.

Part numbers include FEL-PRO TOS18621, MAHLE / CLEVITE W39341 and MAHLE / CLEVITE W39341TC, among others listed above.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Fluid Pump Bushing parts for the 1989 Bentley Continental come from DURA-BOND.

Part numbers include DURA-BOND 44034 and DURA-BOND 44034TG.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

3 Fluid Pump Repair Sleeve parts are listed for the 1989 Bentley Continental, from BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS88187, NATIONAL 99187 and WJB / INMOTION PARTS WS99187.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Fluid Pump Seal parts are listed for the 1989 Bentley Continental, from BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS6712NA, NATIONAL 6712NA and WJB / INMOTION PARTS WS6712NA.

This table covers the governors and modulators that control transmission shift pressure. Read more

5 Governor / Modulator parts for the 1989 Bentley Continental come from 3 brands — ROSTRA, ATP and PIONEER. The "Popular" part is ATP JX76.

This group includes ATP JX76, PIONEER 747024 and ROSTRA 510017 and the remaining parts above.

This table covers the Kickdown solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 1989 Bentley Continental — ROSTRA 520604.

This table covers the Main shafts. Read more

One part is listed for the 1989 Bentley Continental — SONNAX 3467205.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Manual Shaft Seal parts are listed for the 1989 Bentley Continental, from NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 8792S and WJB / INMOTION PARTS WS8792S.

This table covers the Output Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1989 Bentley Continental — DURA-BOND 8624988.

This table covers the rebuild kits for this assembly. Read more

5 Rebuild Kit parts are listed for the 1989 Bentley Continental, from PIONEER, ATP and TRANSTEC. ATP JMS9 carries the "Popular" badge.

In the Deluxe Kit (Master Kit + Filter, Band & Common Bushings) grade, PIONEER supplies 1 part: grouped under the catalog's "Deluxe Kit (Master Kit + Filter, Band & Common Bushings)" designation — the notes column spells out what sets them apart. A representative part number is PIONEER 753024.

The Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) section lists 2 options from ATP and PIONEER — grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. ATP JMS9 is listed in this group.

In the Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) grade, TRANSTEC supplies 1 part: grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. A representative part number is TRANSTEC 81000348.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Part numbers include ATP JMS9, PIONEER 753024 and PIONEER 752353, among others listed above.

This table covers the Shift Improvement kits. Read more

4 Shift Improvement Kit parts for the 1989 Bentley Continental come from TRANSGO.

In the Daily Driver grade, TRANSGO supplies 1 part: grouped for everyday commuting duty. A representative part number is TRANSGO SK400.

The High Performance section lists 3 options from TRANSGO — engineered beyond original-equipment specification. TRANSGO 40012 is listed in this group.

Listed part numbers: TRANSGO SK400, TRANSGO 40012 and TRANSGO 4003, plus the other parts above.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Shift Shaft Seal parts are listed for the 1989 Bentley Continental, from ACDELCO and SCHAEFFLER.

This group includes ACDELCO 8792S and SCHAEFFLER SS2114.

This table covers the Stator Support Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DURA-BOND 8623944.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

This group shows a single part: TC REMANUFACTURING B3.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

One part is listed for the 1989 Bentley Continental — SCHAEFFLER SR3506.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1989 Bentley Continental — SCHAEFFLER SS2912.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

7 Transmission Fluid parts for the 1989 Bentley Continental come from VALVOLINE. The "Popular" part is VALVOLINE 798153.

The Dexron section lists 3 options from VALVOLINE — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. VALVOLINE 798153 is listed in this group.

The Multi-Vehicle section lists 4 options from VALVOLINE — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. VALVOLINE VV3246 is listed in this group.

Part numbers include VALVOLINE 798153, VALVOLINE 773636 and VALVOLINE VV349, among others listed above.

This table covers the conditioners and additives used with this transmission fluid. Read more

8 Transmission Fluid Additive parts for the 1989 Bentley Continental come from 2 brands — LUBEGARD and ATP. The "Popular" part is LUBEGARD 19610.

Part numbers include LUBEGARD 19610, LUBEGARD 60902 and ATP AT202, among others listed above.