1990 Bentley Continental Ignition Parts

Engine:
6.7L V8

This page lists 25 ignition parts for the 1990 Bentley Continental, across 2 part types, covering the 6.7L V8 engine. Every part shows its brand, manufacturer part number and fitment notes.

On the 1990 Bentley Continental, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 25 listed parts are Spark Plug (15 parts) and Ignition Coil (10 parts).

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular UC15T
🇺🇸 US 🇨🇦 CA
T-Series
View on
Amazon
FVP UC15F
🇺🇸 US 🇨🇦 CA
View on
Amazon
HOLSTEIN 2IGC0058
🇺🇸 US 🇨🇦 CA
View on
Amazon
SKP SKUC15T
🇺🇸 US 🇨🇦 CA
Coil Pack
View on
Amazon
SPECTRA PREMIUM C622
🇺🇸 US 🇨🇦 CA
Pack
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
NGK Popular 48863
🇺🇸 US 🇨🇦 CA
Connections May be Eyelet or Spade
View on
Amazon
STANDARD MOTOR PRODUCTS UC15
🇺🇸 US 🇨🇦 CA
View on
Amazon
UNITED MOTOR PRODUCTS C15
🇺🇸 US 🇨🇦 CA
View on
Amazon
WALKER PRODUCTS 9201041
🇺🇸 US 🇨🇦 CA
Single Coil
View on
Amazon
WELLS 5C1019
🇺🇸 US 🇨🇦 CA
Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Spark Plug

Summary: Notes include pre-set gaps of 0.032", 0.033", 0.035", 0.036", 0.040" and 0.044". Replacement brands in this table include DENSO, CHAMPION and NGK.

Copper / Nickel

Brand Part Number Markets Notes Buy
CHAMPION 404
🇺🇸 US 🇨🇦 CA
Copper PlusPre-Set Gap: 0.035"
Fitment notes — CHAMPION 404
Copper PlusPre-Set Gap: 0.035"
OE TypeOE-Recommended Gap: 0.040"Resistor Plug
View on
Amazon
CHAMPION 4041
🇺🇸 US 🇨🇦 CA
Copper PlusClassification: Champion Copper Plus
Fitment notes — CHAMPION 4041
Copper PlusClassification: Champion Copper Plus
OE TypeOE-Recommended Gap: 0.040"Resistor Plug
View on
Amazon
DENSO 3191
🇺🇸 US 🇨🇦 CA
U-Groove ConventionalPre-Set Gap: 0.032"
Fitment notes — DENSO 3191
U-Groove ConventionalPre-Set Gap: 0.032"
Gap .032
View on
Amazon
NGK 2460
🇺🇸 US 🇨🇦 CA
StandardPre-Set Gap: 0.036"
Fitment notes — NGK 2460
StandardPre-Set Gap: 0.036"
OE-Recommended Gap: 0.036 IN
View on
Amazon
NGK 7938
🇺🇸 US 🇨🇦 CA
V-PowerPre-Set Gap: 0.036"
Fitment notes — NGK 7938
V-PowerPre-Set Gap: 0.036"
OE-Recommended Gap: 0.036 IN
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO 41828
🇺🇸 US 🇨🇦 CA
ProfessionalDouble Platinum
Fitment notes — ACDELCO 41828
ProfessionalDouble PlatinumPre-Set Gap: 0.033"
OE-Recommended Gap: 0.040 (in)
View on
Amazon
CHAMPION 7322
🇺🇸 US 🇨🇦 CA
Double Platinum PowerPre-Set Gap: 0.032"
Fitment notes — CHAMPION 7322
Double Platinum PowerPre-Set Gap: 0.032"
OE-Recommended Gap: 0.040"
View on
Amazon
DENSO 3264
🇺🇸 US 🇨🇦 CA
Double PlatinumPre-Set Gap: 0.044"
Fitment notes — DENSO 3264
Double PlatinumPre-Set Gap: 0.044"
Gap .044
View on
Amazon

Iridium (lasts up to 4x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
NGK Popular 6341
🇺🇸 US 🇨🇦 CA
Iridium IXPre-Set Gap: 0.032"
Fitment notes — NGK 6341
Iridium IXPre-Set Gap: 0.032"
OE-Recommended Gap: 0.036 IN
View on
Amazon
DENSO 5303
🇺🇸 US 🇨🇦 CA
Iridium PowerPre-Set Gap: 0.044"
Fitment notes — DENSO 5303
Iridium PowerPre-Set Gap: 0.044"
Gap .044
View on
Amazon
DENSO 4701
🇺🇸 US 🇨🇦 CA
Iridium TTPre-Set Gap: 0.040"
Fitment notes — DENSO 4701
Iridium TTPre-Set Gap: 0.040"
Gap .040
View on
Amazon
DENSO 3395
🇺🇸 US 🇨🇦 CA
Iridium Long LifePre-Set Gap: 0.044"
Fitment notes — DENSO 3395
Iridium Long LifePre-Set Gap: 0.044"
Gap .044
View on
Amazon

Platinum (lasts up to 2x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
DENSO Popular 4503
🇺🇸 US 🇨🇦 CA
Platinum TTPlatinum
Fitment notes — DENSO 4503
Platinum TTPlatinum
Gap .040
View on
Amazon
NGK Popular 7090
🇺🇸 US 🇨🇦 CA
G-PowerPre-Set Gap: 0.040"
Fitment notes — NGK 7090
G-PowerPre-Set Gap: 0.040"
OE-Recommended Gap: 0.036 IN
View on
Amazon
CHAMPION 3405
🇺🇸 US 🇨🇦 CA
Platinum PowerPlug Type: RN14PMC
Fitment notes — CHAMPION 3405
Platinum PowerPlug Type: RN14PMCPre-Set Gap: 0.035"
OE-Recommended Gap: 0.040"
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1990 Bentley Continental

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 6.7L V8 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Spark Plug and Ignition Coil .

Frequently Asked Questions

How many ignition parts fit the 1990 Bentley Continental?

Our catalog currently lists 25 ignition parts for the 1990 Bentley Continental across 2 subcategories and 12 brands, covering the 6.7L V8 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1990 Bentley Continental?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1990 Bentley Continental?

Notes on this page include pre-set gaps of 0.032", 0.033", 0.035", 0.036", 0.040" and 0.044". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1990 Bentley Continental was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1990 Bentley Continental?

Every part on this page is matched to the 6.7L V8 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1990 Bentley Continental

Ignition Parts for Other Bentley Continental Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.