1992 Bentley Continental Automatic Transmission Parts

This table covers the apply bands inside the automatic transmission. Read more

3 Band parts are listed for the 1992 Bentley Continental, from ATP, BORG-WARNER and PIONEER.

Listed part numbers: ATP CX42, BORG-WARNER 23983BW and PIONEER 767015.

This table covers the Boost valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

TRANSGO supplies the 4 Boost Valve parts for the 1992 Bentley Continental.

Part numbers include TRANSGO 7500, TRANSGO 7472 and TRANSGO 7300, among others listed above.

This table covers the bushings in this assembly. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

6 Bushing parts for the 1992 Bentley Continental come from 3 brands — ATP, PIONEER and DURA-BOND. The "Popular" part is DURA-BOND GMT31A.

This group includes DURA-BOND GMT31A, PIONEER 755051 and ATP SB33 and the remaining parts above.

This table covers the Bushing kits. Read more

3 Bushing Kit parts for the 1992 Bentley Continental come from DURA-BOND.

This group includes DURA-BOND TK23, DURA-BOND TK23EK and DURA-BOND TK23HP.

This table covers the Clutch springs. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

This group shows a single part: TRANSGO 7CS.

This table covers the seals at the Dipstick / Fluid Filler Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Dipstick / Fluid Filler Tube Seal parts are listed for the 1992 Bentley Continental, from ATP and PIONEER.

Listed part numbers: ATP SO35 and PIONEER 760014.

This table covers the Extension Housing bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Extension Housing Bearing parts for the 1992 Bentley Continental come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.

The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS RB6009 is listed in this group.

In the Standard Replacement grade, BCA and NATIONAL supply 2 parts: built to original-equipment specification. A representative part number is BCA NB109.

Listed part numbers: WJB / INMOTION PARTS RB6009, BCA NB109 and NATIONAL 109.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Extension Housing Seal parts are listed for the 1992 Bentley Continental, from NATIONAL, WJB / INMOTION PARTS and SCHAEFFLER. NATIONAL 9449 carries the "Popular" badge.

Part numbers include NATIONAL 9449, NATIONAL 5208 and SCHAEFFLER SS2960, among others listed above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

3 Filter parts for the 1992 Bentley Continental come from 2 brands — ATP and PIONEER.

The Economy section: 1 option from ATP. ATP TF96 is listed in this group.

Standard Replacement: 2 parts, from ATP and PIONEER. A representative part number is ATP B96.

This group includes ATP TF96, ATP B96 and PIONEER 745031.

This table covers the pans that hold automatic-transmission fluid. Read more

One part is listed for the 1992 Bentley Continental — ATP 103017.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Fluid Pan Gasket parts for the 1992 Bentley Continental come from 3 brands — MAHLE / CLEVITE, VICTOR REINZ and FEL-PRO. The "Popular" part is FEL-PRO TOS18663.

This group includes FEL-PRO TOS18663, MAHLE / CLEVITE W39365 and MAHLE / CLEVITE W39365TC and the remaining parts above.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

2 Fluid Pump Repair Sleeve parts are listed for the 1992 Bentley Continental, from NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 99199 and WJB / INMOTION PARTS WS99199.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Fluid Pump Seal parts are listed for the 1992 Bentley Continental, from BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS4598, NATIONAL 4598 and WJB / INMOTION PARTS WS4598.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Manual Shaft Seal parts are listed for the 1992 Bentley Continental, from NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 8792S and WJB / INMOTION PARTS WS8792S.

This table covers the rebuild kits for this assembly. Read more

One part is listed for the 1992 Bentley Continental — ACDELCO 19532537.

This table covers the pistons in a transmission servo. Read more

This group shows a single part: TRANSGO 72P.

This table covers the Shift Improvement kits. Read more

2 Shift Improvement Kit parts for the 1992 Bentley Continental come from TRANSGO.

In the Daily Driver grade, TRANSGO supplies 1 part: grouped for everyday commuting duty. A representative part number is TRANSGO SK700JR.

The High Performance section lists 1 option from TRANSGO — engineered beyond original-equipment specification. TRANSGO 70023 is listed in this group.

This group includes TRANSGO SK700JR and TRANSGO 70023.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 1992 Bentley Continental — PA CARGO K77929U.

This table covers the Sun Gear bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1992 Bentley Continental — PIONEER 755053.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

This group shows a single part: TC REMANUFACTURING B29DHHF.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Torque Converter Clutch Solenoid parts for the 1992 Bentley Continental come from 2 brands — ATP and PIONEER.

Part numbers include ATP CE1 and PIONEER 771003.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

10 Transmission Fluid parts for the 1992 Bentley Continental come from 2 brands — VALVOLINE and PENTOSIN. The "Popular" part is VALVOLINE 798153.

The Dexron section lists 3 options from VALVOLINE — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. VALVOLINE 798153 is listed in this group.

The Multi-Vehicle section lists 4 options from VALVOLINE — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. VALVOLINE VV3246 is listed in this group.

The ZF Fluid section lists 3 options from PENTOSIN — grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. PENTOSIN 1058106 is listed in this group.

This table covers the conditioners and additives used with this transmission fluid. Read more

8 Transmission Fluid Additive parts for the 1992 Bentley Continental come from 2 brands — LUBEGARD and ATP. The "Popular" part is LUBEGARD 19610.

Listed part numbers: LUBEGARD 19610, LUBEGARD 60902 and ATP AT202, plus the other parts above.

This table covers the Valve Body Separator plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

One part is listed for the 1992 Bentley Continental — TRANSGO 700P.