1992 Bentley Mulsanne Automatic Transmission Parts

This table covers the apply bands inside the automatic transmission. Read more

2 Band parts are listed for the 1992 Bentley Mulsanne, from ATP and PIONEER.

This group includes ATP CX42 and PIONEER 767015.

This table covers the Boost valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

TRANSGO supplies the 4 Boost Valve parts for the 1992 Bentley Mulsanne.

This group includes TRANSGO 7500, TRANSGO 7472 and TRANSGO 7300 and the remaining parts above.

This table covers the bushings in this assembly. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

6 Bushing parts for the 1992 Bentley Mulsanne come from 3 brands — ATP, PIONEER and DURA-BOND. The "Popular" part is DURA-BOND GMT31A.

Part numbers include DURA-BOND GMT31A, PIONEER 755051 and ATP SB33, among others listed above.

This table covers the Bushing kits. Read more

3 Bushing Kit parts for the 1992 Bentley Mulsanne come from DURA-BOND.

Part numbers include DURA-BOND TK23, DURA-BOND TK23EK and DURA-BOND TK23HP.

This table covers the Clutch springs. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

This group shows a single part: TRANSGO 7CS.

This table covers the seals at the Dipstick / Fluid Filler Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Dipstick / Fluid Filler Tube Seal parts are listed for the 1992 Bentley Mulsanne, from ATP and PIONEER.

Listed part numbers: ATP SO35 and PIONEER 760014.

This table covers the Extension Housing bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Extension Housing Bearing parts for the 1992 Bentley Mulsanne come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.

The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS RB6009 is listed in this group.

In the Standard Replacement grade, BCA and NATIONAL supply 2 parts: built to original-equipment specification. A representative part number is BCA NB109.

This group includes WJB / INMOTION PARTS RB6009, BCA NB109 and NATIONAL 109.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Extension Housing Seal parts are listed for the 1992 Bentley Mulsanne, from NATIONAL, WJB / INMOTION PARTS and SCHAEFFLER. NATIONAL 9449 carries the "Popular" badge.

Part numbers include NATIONAL 9449, NATIONAL 5208 and SCHAEFFLER SS2960, among others listed above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

3 Filter parts for the 1992 Bentley Mulsanne come from 2 brands — ATP and PIONEER.

The Economy section: 1 option from ATP. ATP TF96 is listed in this group.

Standard Replacement: 2 parts, from ATP and PIONEER. A representative part number is ATP B96.

Part numbers include ATP TF96, ATP B96 and PIONEER 745031.

This table covers the pans that hold automatic-transmission fluid. Read more

One part is listed for the 1992 Bentley Mulsanne — ATP 103017.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Fluid Pan Gasket parts for the 1992 Bentley Mulsanne come from 3 brands — MAHLE / CLEVITE, VICTOR REINZ and FEL-PRO. The "Popular" part is FEL-PRO TOS18663.

Part numbers include FEL-PRO TOS18663, MAHLE / CLEVITE W39365 and MAHLE / CLEVITE W39365TC, among others listed above.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

2 Fluid Pump Repair Sleeve parts are listed for the 1992 Bentley Mulsanne, from NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 99199 and WJB / INMOTION PARTS WS99199.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Fluid Pump Seal parts are listed for the 1992 Bentley Mulsanne, from BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS4598, NATIONAL 4598 and WJB / INMOTION PARTS WS4598.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Manual Shaft Seal parts are listed for the 1992 Bentley Mulsanne, from NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 8792S and WJB / INMOTION PARTS WS8792S.

This table covers the rebuild kits for this assembly. Read more

One part is listed for the 1992 Bentley Mulsanne — ACDELCO 19532537.

This table covers the pistons in a transmission servo. Read more

This group shows a single part: TRANSGO 72P.

This table covers the Shift Improvement kits. Read more

2 Shift Improvement Kit parts for the 1992 Bentley Mulsanne come from TRANSGO.

In the Daily Driver grade, TRANSGO supplies 1 part: grouped for everyday commuting duty. A representative part number is TRANSGO SK700JR.

The High Performance section lists 1 option from TRANSGO — engineered beyond original-equipment specification. TRANSGO 70023 is listed in this group.

Part numbers include TRANSGO SK700JR and TRANSGO 70023.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 1992 Bentley Mulsanne — PA CARGO K77929U.

This table covers the Sun Gear bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1992 Bentley Mulsanne — PIONEER 755053.