1993 Bentley Continental Ignition Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

The 1993 Bentley Continental has 19 ignition parts with verified fitment on this page — 1 part type and 6 brands, covering all 3 engine options (6.7L V8, 6.7L V8 Turbocharged and 6.8L V8 Turbocharged). Each part includes a manufacturer part number and application notes.

On the 1993 Bentley Continental, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Every listed part is a Spark Plug.

Spark Plug

Summary: Notes include pre-set gaps of 0.032", 0.035", 0.036", 0.040", 0.041" and 0.044". Replacement brands in this table include DENSO, NGK and CHAMPION.

Copper / Nickel

Brand Part Number Markets Notes Buy
AUTOLITE Fits: 6.8L V8 Turbocharged 65
🇺🇸 US 🇨🇦 CA
Copper Resistor Spark PlugDisplay Pack
Fitment notes — AUTOLITE 65
Copper Resistor Spark PlugDisplay PackQTY2Pre-Set Gap: 0.035"
Gap .040 (In) 1.0 (mm)
View on
Amazon
BOSCH Fits: 6.7L V8 Turbocharged 7513
🇺🇸 US 🇨🇦 CA
Gap 0.040 in
View on
Amazon
CHAMPION Fits: 6.8L V8 Turbocharged 405
🇺🇸 US 🇨🇦 CA
Copper PlusPre-Set Gap: 0.035"
Fitment notes — CHAMPION 405
Copper PlusPre-Set Gap: 0.035"
OE TypeOE-Recommended Gap: 0.040"
View on
Amazon
DENSO Fits: 6.8L V8 Turbocharged 3191
🇺🇸 US 🇨🇦 CA
U-Groove ConventionalPre-Set Gap: 0.032"
Fitment notes — DENSO 3191
U-Groove ConventionalPre-Set Gap: 0.032"
Gap .032
View on
Amazon
NGK Fits: 6.8L V8 Turbocharged 2460
🇺🇸 US 🇨🇦 CA
StandardPre-Set Gap: 0.036"
Fitment notes — NGK 2460
StandardPre-Set Gap: 0.036"
OE-Recommended Gap: 0.036 IN
View on
Amazon
NGK Fits: 6.8L V8 Turbocharged 7938
🇺🇸 US 🇨🇦 CA
V-PowerPre-Set Gap: 0.036"
Fitment notes — NGK 7938
V-PowerPre-Set Gap: 0.036"
OE-Recommended Gap: 0.036 IN
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO Fits: 6.8L V8 Turbocharged 41804
🇺🇸 US 🇨🇦 CA
ProfessionalDouble Platinum
Fitment notes — ACDELCO 41804
ProfessionalDouble PlatinumPre-Set Gap: 0.035"
OE-Recommended Gap: 0.032"
View on
Amazon
AUTOLITE Fits: 6.8L V8 Turbocharged APP65
🇺🇸 US 🇨🇦 CA
Double PlatinumPre-Set Gap: 0.035"
Fitment notes — AUTOLITE APP65
Double PlatinumPre-Set Gap: 0.035"
Gap .040 (In) 1.0 (mm)
View on
Amazon
CHAMPION Fits: 6.8L V8 Turbocharged 7322
🇺🇸 US 🇨🇦 CA
Double Platinum PowerPre-Set Gap: 0.032"
Fitment notes — CHAMPION 7322
Double Platinum PowerPre-Set Gap: 0.032"
OE-Recommended Gap: 0.040"
View on
Amazon
DENSO Fits: 6.8L V8 Turbocharged 3264
🇺🇸 US 🇨🇦 CA
Double PlatinumPre-Set Gap: 0.044"
Fitment notes — DENSO 3264
Double PlatinumPre-Set Gap: 0.044"
Gap .044
View on
Amazon

Iridium (lasts up to 4x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
DENSO Popular Fits: 6.8L V8 Turbocharged 5303
🇺🇸 US 🇨🇦 CA
Iridium PowerPre-Set Gap: 0.044"
Fitment notes — DENSO 5303
Iridium PowerPre-Set Gap: 0.044"
Gap .044
View on
Amazon
NGK Popular Fits: 6.8L V8 Turbocharged 6341
🇺🇸 US 🇨🇦 CA
Iridium IXPre-Set Gap: 0.032"
Fitment notes — NGK 6341
Iridium IXPre-Set Gap: 0.032"
OE-Recommended Gap: 0.036 IN
View on
Amazon
DENSO Fits: 6.8L V8 Turbocharged 4701
🇺🇸 US 🇨🇦 CA
Iridium TTPre-Set Gap: 0.040"
Fitment notes — DENSO 4701
Iridium TTPre-Set Gap: 0.040"
Gap .040
View on
Amazon
DENSO Fits: 6.8L V8 Turbocharged 3395
🇺🇸 US 🇨🇦 CA
Iridium Long LifePre-Set Gap: 0.044"
Fitment notes — DENSO 3395
Iridium Long LifePre-Set Gap: 0.044"
Gap .044
View on
Amazon

Platinum (lasts up to 2x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
DENSO Popular Fits: 6.8L V8 Turbocharged 4503
🇺🇸 US 🇨🇦 CA
Platinum TTPlatinum
Fitment notes — DENSO 4503
Platinum TTPlatinum
Gap .040
View on
Amazon
NGK Popular Fits: 6.8L V8 Turbocharged 7090
🇺🇸 US 🇨🇦 CA
G-PowerPre-Set Gap: 0.040"
Fitment notes — NGK 7090
G-PowerPre-Set Gap: 0.040"
OE-Recommended Gap: 0.036 IN
View on
Amazon
ACDELCO Fits: 6.8L V8 Turbocharged 4
🇺🇸 US 🇨🇦 CA
ProfessionalRapidfire
Fitment notes — ACDELCO 4
ProfessionalRapidfirePre-Set Gap: 0.041"
OE-Recommended Gap: 0.032 (in)
View on
Amazon
BOSCH Fits: 6.7L V8 Turbocharged 4221
🇺🇸 US 🇨🇦 CA
Gap 0.040 in
View on
Amazon
CHAMPION Fits: 6.8L V8 Turbocharged 3405
🇺🇸 US 🇨🇦 CA
Platinum PowerPlug Type: RN14PMC
Fitment notes — CHAMPION 3405
Platinum PowerPlug Type: RN14PMCPre-Set Gap: 0.035"
OE-Recommended Gap: 0.040"
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1993 Bentley Continental

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Match the engine first. Every ignition part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Spark Plug .

Frequently Asked Questions

How many ignition parts fit the 1993 Bentley Continental?

Our catalog currently lists 19 ignition parts for the 1993 Bentley Continental across 1 subcategory and 6 brands, covering all 3 engine options (6.7L V8, 6.7L V8 Turbocharged and 6.8L V8 Turbocharged). Each part is matched to the engine(s) it fits.

Do ignition parts differ between 1993 Bentley Continental engines?

Yes. Every ignition part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of ignition problems on a 1993 Bentley Continental?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1993 Bentley Continental?

Notes on this page include pre-set gaps of 0.032", 0.035", 0.036", 0.040", 0.041" and 0.044". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1993 Bentley Continental was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1993 Bentley Continental?

First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1993 Bentley Continental

Ignition Parts for Other Bentley Continental Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.