1994 Bentley Continental Automatic Transmission Parts

This table covers the Actuator Feed Limit valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Actuator Feed Limit Valve parts for the 1994 Bentley Continental come from TRANSGO.

Part numbers include TRANSGO 48ACTVL6 and TRANSGO 48ACTTL.

This table covers the apply bands inside the automatic transmission. Read more

One part is listed for the 1994 Bentley Continental — BORG-WARNER 38014BW.

This table covers the Boost valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 1994 Bentley Continental — SONNAX 4L80ELB1.

This table covers the bushings in this assembly. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DURA-BOND GMT42.

This table covers the Bushing kits. Read more

5 Bushing Kit parts for the 1994 Bentley Continental come from DURA-BOND.

Listed part numbers: DURA-BOND TK4, DURA-BOND TK4A and DURA-BOND TK4AEK, plus the other parts above.

This table covers the Case bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Case Bushing parts for the 1994 Bentley Continental come from 2 brands — DURA-BOND and SONNAX.

Listed part numbers: DURA-BOND GMT44 and SONNAX 34006SPB.

This table covers the Center Support bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Center Support Bushing parts for the 1994 Bentley Continental come from DURA-BOND.

Part numbers include DURA-BOND 02101 and DURA-BOND 03118.

This table covers the Clutch hubs. Read more

This group shows a single part: SONNAX 3432202K.

This table covers the related components grouped with this assembly. Read more

8 Components parts for the 1994 Bentley Continental come from SONNAX. The "Popular" part is SONNAX 3499801K.

Part numbers include SONNAX 3499801K, SONNAX 3420047K and SONNAX 3471601, among others listed above.

This table covers the Extension Housing bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Extension Housing Bearing parts for the 1994 Bentley Continental come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.

The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS RB6009 is listed in this group.

In the Standard Replacement grade, BCA and NATIONAL supply 2 parts: built to original-equipment specification. A representative part number is BCA NB109.

Part numbers include WJB / INMOTION PARTS RB6009, BCA NB109 and NATIONAL 109.

This table covers the Extension Housing bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DURA-BOND 34005F.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Extension Housing Seal parts are listed for the 1994 Bentley Continental, from NATIONAL, SCHAEFFLER, WJB / INMOTION PARTS and 3 other brands. NATIONAL 9449 carries the "Popular" badge.

Listed part numbers: NATIONAL 9449, SCHAEFFLER SS2960 and ATP JO124, plus the other parts above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

5 Filter parts for the 1994 Bentley Continental come from 2 brands — ATP and VARIOUS MFR. The "Popular" part is ATP B105.

The Economy section: 2 options from ATP and VARIOUS MFR. ATP TF105 is listed in this group.

Standard Replacement: 3 parts, from ATP. A representative part number is ATP B105.

Listed part numbers: ATP B105, ATP TF105 and VARIOUS MFR PT1202, plus the other parts above.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Fluid Pan Gasket parts for the 1994 Bentley Continental come from 5 brands — ATP, FEL-PRO, MAHLE / CLEVITE and 2 other brands. The "Popular" part is ATP JG142.

Listed part numbers: ATP JG142, FEL-PRO TOS18698 and MAHLE / CLEVITE W39379, plus the other parts above.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

6 Fluid Pump Bushing parts for the 1994 Bentley Continental come from DURA-BOND. The "Popular" part is DURA-BOND 34001CSTG.

Part numbers include DURA-BOND 34001CSTG, DURA-BOND 34001CT and DURA-BOND 34001, among others listed above.

This table covers the gaskets that seal the Fluid Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Fluid Pump Gasket parts are listed for the 1994 Bentley Continental, from ATP and PIONEER.

This group includes ATP SG47 and PIONEER 749361.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

2 Fluid Pump Repair Sleeve parts are listed for the 1994 Bentley Continental, from NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 99199 and WJB / INMOTION PARTS WS99199.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Fluid Pump Seal parts are listed for the 1994 Bentley Continental, from BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS4598, NATIONAL 4598 and WJB / INMOTION PARTS WS4598.

This table covers the governors and modulators that control transmission shift pressure. Read more

This group shows a single part: TRANSGO 48MOD.

This table covers the Main shafts. Read more

One part is listed for the 1994 Bentley Continental — SONNAX 3467205.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Manual Shaft Seal parts are listed for the 1994 Bentley Continental, from NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 8792S and WJB / INMOTION PARTS WS8792S.

This table covers the Output Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1994 Bentley Continental — DURA-BOND 8624988.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Pressure Control (EPC) Solenoid parts for the 1994 Bentley Continental come from 2 brands — PA CARGO and ROSTRA.

Part numbers include PA CARGO 34605A and ROSTRA 520340.

This table covers the Pressure Switch manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

One part is listed for the 1994 Bentley Continental — ROSTRA 501000.

This table covers the rebuild kits for this assembly. Read more

5 Rebuild Kit parts are listed for the 1994 Bentley Continental, from PIONEER, TRANSTEC and ATP. TRANSTEC 81000401 carries the "Popular" badge.

In the Deluxe Kit (Master Kit + Filter, Band & Common Bushings) grade, ATP and PIONEER supply 2 parts: grouped under the catalog's "Deluxe Kit (Master Kit + Filter, Band & Common Bushings)" designation — the notes column spells out what sets them apart. A representative part number is ATP PMS113.

The Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) section lists 1 option from PIONEER — grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. PIONEER 752214 is listed in this group.

In the Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) grade, TRANSTEC supplies 2 parts: grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. A representative part number is TRANSTEC 81000401.

Listed part numbers: TRANSTEC 81000401, ATP PMS113 and PIONEER 753059, plus the other parts above.

This table covers the sealing rings inside this assembly. Read more

This group shows a single part: TRANSGO 4L80EHTRK.

This table covers the Shift Improvement kits. Read more

3 Shift Improvement Kit parts for the 1994 Bentley Continental come from TRANSGO.

In the Daily Driver grade, TRANSGO supplies 1 part: grouped for everyday commuting duty. A representative part number is TRANSGO SK4L80E.

The High Performance section lists 2 options from TRANSGO — engineered beyond original-equipment specification. TRANSGO 4L80EHD2 is listed in this group.

Part numbers include TRANSGO SK4L80E, TRANSGO 4L80EHD2 and TRANSGO 4L80E3.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Shift Shaft Seal parts are listed for the 1994 Bentley Continental, from ACDELCO and SCHAEFFLER.

Part numbers include ACDELCO 8792S and SCHAEFFLER SS2114.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Shift Solenoid parts are listed for the 1994 Bentley Continental, from ATP and ROSTRA.

This group includes ATP JE53 and ROSTRA 520356.

This table covers the Stator Support Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

3 Stator Support Shaft Bushing parts for the 1994 Bentley Continental come from DURA-BOND.

Part numbers include DURA-BOND GMT41, DURA-BOND 8661614 and DURA-BOND GMT41A.

This table covers the Sun Gear bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DURA-BOND supplies the 3 Sun Gear Bushing parts for the 1994 Bentley Continental.

Listed part numbers: DURA-BOND 03131BRS, DURA-BOND 03131 and DURA-BOND 8623944.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

This group shows a single part: TC REMANUFACTURING B82NS.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Torque Converter Clutch Solenoid parts for the 1994 Bentley Continental come from 2 brands — PIONEER and ROSTRA.

This group includes PIONEER 771021 and ROSTRA 520241.

This table covers the Torque Converter Clutch valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

TRANSGO supplies both parts for the 1994 Bentley Continental.

This group includes TRANSGO 4L80ETCC and TRANSGO 48CCV.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

One part is listed for the 1994 Bentley Continental — SCHAEFFLER SR3511.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1994 Bentley Continental — SCHAEFFLER SS3040.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

11 Transmission Fluid parts for the 1994 Bentley Continental come from 3 brands — VALVOLINE, PENTOSIN and ZF. The "Popular" part is VALVOLINE 798153.

The Dexron section lists 3 options from VALVOLINE — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. VALVOLINE 798153 is listed in this group.

The Multi-Vehicle section lists 4 options from VALVOLINE — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. VALVOLINE VV3246 is listed in this group.

The ZF Fluid section lists 4 options from PENTOSIN and ZF — grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. PENTOSIN 1058106 is listed in this group.

This table covers the conditioners and additives used with this transmission fluid. Read more

8 Transmission Fluid Additive parts for the 1994 Bentley Continental come from 2 brands — LUBEGARD and ATP. The "Popular" part is LUBEGARD 19610.

Listed part numbers: LUBEGARD 19610, LUBEGARD 60902 and ATP AT202, plus the other parts above.

This table covers the valve bodies that route hydraulic pressure inside the transmission. Read more

2 Valve Body parts for the 1994 Bentley Continental come from 2 brands — PA CARGO and SONNAX.

Listed part numbers: PA CARGO GM4623 and SONNAX GM027.

This table covers the gaskets that seal the Valve Body. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1994 Bentley Continental — TRANSTEC 72401472.

This table covers the Valve Body Separator plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

One part is listed for the 1994 Bentley Continental — TRANSGO 48PLT01.

This table covers the testers used to diagnose a valve body. Read more

This group shows a single part: SONNAX 34994VTP.