1995 Bentley Continental Automatic Transmission Parts

This table covers the Actuator Feed Limit valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

TRANSGO supplies both parts for the 1995 Bentley Continental.

This group includes TRANSGO 48ACTVL6 and TRANSGO 48ACTTL.

This table covers the apply bands inside the automatic transmission. Read more

This group shows a single part: BORG-WARNER 38014BW.

This table covers the Boost valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: SONNAX 4L80ELB1.

This table covers the bushings in this assembly. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1995 Bentley Continental — DURA-BOND GMT42.

This table covers the Bushing kits. Read more

DURA-BOND supplies the 5 Bushing Kit parts for the 1995 Bentley Continental.

Listed part numbers: DURA-BOND TK4, DURA-BOND TK4A and DURA-BOND TK4AEK, plus the other parts above.

This table covers the Case bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Case Bushing parts are listed for the 1995 Bentley Continental, from DURA-BOND and SONNAX.

This group includes DURA-BOND GMT44 and SONNAX 34006SPB.

This table covers the Center Support bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DURA-BOND supplies both parts for the 1995 Bentley Continental.

Listed part numbers: DURA-BOND 02101 and DURA-BOND 03118.

This table covers the Clutch hubs. Read more

One part is listed for the 1995 Bentley Continental — SONNAX 3432202K.

This table covers the related components grouped with this assembly. Read more

SONNAX supplies the 8 Components parts for the 1995 Bentley Continental. SONNAX 3499801K carries the "Popular" badge.

Listed part numbers: SONNAX 3499801K, SONNAX 3420047K and SONNAX 3471601, plus the other parts above.

This table covers the Extension Housing bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Extension Housing Bearing parts are listed for the 1995 Bentley Continental, from WJB / INMOTION PARTS, BCA and NATIONAL.

In the Economy grade, WJB / INMOTION PARTS supplies 1 part: the catalog's value-priced group. A representative part number is WJB / INMOTION PARTS RB6009.

The Standard Replacement section lists 2 options from BCA and NATIONAL — built to original-equipment specification. BCA NB109 is listed in this group.

Part numbers include WJB / INMOTION PARTS RB6009, BCA NB109 and NATIONAL 109.

This table covers the Extension Housing bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1995 Bentley Continental — DURA-BOND 34005F.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Extension Housing Seal parts for the 1995 Bentley Continental come from 6 brands — WJB / INMOTION PARTS, NATIONAL, SCHAEFFLER and 3 other brands. The "Popular" part is NATIONAL 9449.

Listed part numbers: NATIONAL 9449, SCHAEFFLER SS2960 and ATP JO124, plus the other parts above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

5 Filter parts are listed for the 1995 Bentley Continental, from ATP and VARIOUS MFR. ATP B105 carries the "Popular" badge.

Economy: 2 parts, from ATP and VARIOUS MFR. A representative part number is ATP TF105.

The Standard Replacement section: 3 options from ATP. ATP B105 is listed in this group.

This group includes ATP B105, ATP TF105 and VARIOUS MFR PT1202 and the remaining parts above.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Fluid Pan Gasket parts are listed for the 1995 Bentley Continental, from ATP, FEL-PRO, MAHLE / CLEVITE and 2 other brands. ATP JG142 carries the "Popular" badge.

Listed part numbers: ATP JG142, FEL-PRO TOS18698 and MAHLE / CLEVITE W39379, plus the other parts above.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DURA-BOND supplies the 6 Fluid Pump Bushing parts for the 1995 Bentley Continental. DURA-BOND 34001CSTG carries the "Popular" badge.

Part numbers include DURA-BOND 34001CSTG, DURA-BOND 34001CT and DURA-BOND 34001, among others listed above.

This table covers the gaskets that seal the Fluid Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Fluid Pump Gasket parts for the 1995 Bentley Continental come from 2 brands — ATP and PIONEER.

This group includes ATP SG47 and PIONEER 749361.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

2 Fluid Pump Repair Sleeve parts for the 1995 Bentley Continental come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 99199 and WJB / INMOTION PARTS WS99199.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Fluid Pump Seal parts for the 1995 Bentley Continental come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS4598, NATIONAL 4598 and WJB / INMOTION PARTS WS4598.

This table covers the governors and modulators that control transmission shift pressure. Read more

One part is listed for the 1995 Bentley Continental — TRANSGO 48MOD.

This table covers the Main shafts. Read more

This group shows a single part: SONNAX 3467205.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Manual Shaft Seal parts for the 1995 Bentley Continental come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 8792S and WJB / INMOTION PARTS WS8792S.

This table covers the Output Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DURA-BOND 8624988.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Pressure Control (EPC) Solenoid parts are listed for the 1995 Bentley Continental, from PA CARGO and ROSTRA.

This group includes PA CARGO 34605A and ROSTRA 520340.

This table covers the Pressure Switch manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

This group shows a single part: ROSTRA 501000.

This table covers the rebuild kits for this assembly. Read more

5 Rebuild Kit parts for the 1995 Bentley Continental come from 3 brands — PIONEER, TRANSTEC and ATP. The "Popular" part is TRANSTEC 81000401.

The Deluxe Kit (Master Kit + Filter, Band & Common Bushings) section lists 2 options from ATP and PIONEER — grouped under the catalog's "Deluxe Kit (Master Kit + Filter, Band & Common Bushings)" designation — the notes column spells out what sets them apart. ATP PMS113 is listed in this group.

In the Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) grade, PIONEER supplies 1 part: grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is PIONEER 752214.

The Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) section lists 2 options from TRANSTEC — grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. TRANSTEC 81000401 is listed in this group.

This group includes TRANSTEC 81000401, ATP PMS113 and PIONEER 753059 and the remaining parts above.

This table covers the sealing rings inside this assembly. Read more

One part is listed for the 1995 Bentley Continental — TRANSGO 4L80EHTRK.

This table covers the Shift Improvement kits. Read more

TRANSGO supplies the 3 Shift Improvement Kit parts for the 1995 Bentley Continental.

The Daily Driver section lists 1 option from TRANSGO — grouped for everyday commuting duty. TRANSGO SK4L80E is listed in this group.

In the High Performance grade, TRANSGO supplies 2 parts: engineered beyond original-equipment specification. A representative part number is TRANSGO 4L80EHD2.

Part numbers include TRANSGO SK4L80E, TRANSGO 4L80EHD2 and TRANSGO 4L80E3.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Shift Shaft Seal parts for the 1995 Bentley Continental come from 2 brands — ACDELCO and SCHAEFFLER.

This group includes ACDELCO 8792S and SCHAEFFLER SS2114.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Shift Solenoid parts for the 1995 Bentley Continental come from 2 brands — ATP and ROSTRA.

Part numbers include ATP JE53 and ROSTRA 520356.

This table covers the Stator Support Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DURA-BOND supplies the 3 Stator Support Shaft Bushing parts for the 1995 Bentley Continental.

Part numbers include DURA-BOND GMT41, DURA-BOND 8661614 and DURA-BOND GMT41A.