1997 Bentley Continental Automatic Transmission Parts

This table covers the Actuator Feed Limit valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

TRANSGO supplies both parts for the 1997 Bentley Continental.

This group includes TRANSGO 48ACTVL6 and TRANSGO 48ACTTL.

This table covers the apply bands inside the automatic transmission. Read more

This group shows a single part: BORG-WARNER 38014BW.

This table covers the Boost valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: SONNAX 4L80ELB1.

This table covers the bushings in this assembly. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Bushing parts are listed for the 1997 Bentley Continental, from DURA-BOND and PIONEER.

Part numbers include DURA-BOND GMT42 and PIONEER 755189.

This table covers the Bushing kits. Read more

DURA-BOND supplies the 5 Bushing Kit parts for the 1997 Bentley Continental.

Listed part numbers: DURA-BOND TK4, DURA-BOND TK4A and DURA-BOND TK4AEK, plus the other parts above.

This table covers the Case bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Case Bushing parts are listed for the 1997 Bentley Continental, from DURA-BOND and SONNAX.

This group includes DURA-BOND GMT44 and SONNAX 34006SPB.

This table covers the Center Support bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DURA-BOND supplies both parts for the 1997 Bentley Continental.

Part numbers include DURA-BOND 02101 and DURA-BOND 03118.

This table covers the Clutch hubs. Read more

One part is listed for the 1997 Bentley Continental — SONNAX 3432202K.

This table covers the related components grouped with this assembly. Read more

SONNAX supplies the 8 Components parts for the 1997 Bentley Continental. SONNAX 3499801K carries the "Popular" badge.

This group includes SONNAX 3499801K, SONNAX 3420047K and SONNAX 3471601 and the remaining parts above.

This table covers the Extension Housing bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Extension Housing Bearing parts are listed for the 1997 Bentley Continental, from WJB / INMOTION PARTS, BCA and NATIONAL.

In the Economy grade, WJB / INMOTION PARTS supplies 1 part: the catalog's value-priced group. A representative part number is WJB / INMOTION PARTS RB6009.

The Standard Replacement section lists 2 options from BCA and NATIONAL — built to original-equipment specification. BCA NB109 is listed in this group.

Part numbers include WJB / INMOTION PARTS RB6009, BCA NB109 and NATIONAL 109.

This table covers the Extension Housing bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1997 Bentley Continental — DURA-BOND 34005F.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Extension Housing Seal parts for the 1997 Bentley Continental come from 6 brands — WJB / INMOTION PARTS, NATIONAL, SCHAEFFLER and 3 other brands. The "Popular" part is NATIONAL 9449.

Listed part numbers: NATIONAL 9449, SCHAEFFLER SS2960 and ATP JO124, plus the other parts above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

6 Filter parts are listed for the 1997 Bentley Continental, from ATP, VARIOUS MFR and PIONEER. ATP TF174 carries the "Popular" badge.

Economy: 2 parts, from ATP and VARIOUS MFR. A representative part number is ATP TF174.

The Standard Replacement section: 4 options from ATP and PIONEER. ATP B174 is listed in this group.

Part numbers include ATP TF174, VARIOUS MFR PT1202 and ATP B174, among others listed above.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Fluid Pan Gasket parts are listed for the 1997 Bentley Continental, from ATP, FEL-PRO, MAHLE / CLEVITE and 2 other brands. ATP JG142 carries the "Popular" badge.

Listed part numbers: ATP JG142, FEL-PRO TOS18698 and MAHLE / CLEVITE W39379, plus the other parts above.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

7 Fluid Pump Bushing parts are listed for the 1997 Bentley Continental, from DURA-BOND and PIONEER. DURA-BOND 34001CSTG carries the "Popular" badge.

Part numbers include DURA-BOND 34001CSTG, DURA-BOND 34001CT and DURA-BOND 34001, among others listed above.

This table covers the gaskets that seal the Fluid Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Fluid Pump Gasket parts for the 1997 Bentley Continental come from 2 brands — ATP and PIONEER.

This group includes ATP SG47 and PIONEER 749361.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

2 Fluid Pump Repair Sleeve parts for the 1997 Bentley Continental come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 99199 and WJB / INMOTION PARTS WS99199.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Fluid Pump Seal parts for the 1997 Bentley Continental come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS4598, NATIONAL 4598 and WJB / INMOTION PARTS WS4598.

This table covers the governors and modulators that control transmission shift pressure. Read more

One part is listed for the 1997 Bentley Continental — TRANSGO 48MOD.

This table covers the Main shafts. Read more

This group shows a single part: SONNAX 3467205.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Manual Shaft Seal parts for the 1997 Bentley Continental come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 8792S and WJB / INMOTION PARTS WS8792S.

This table covers the Output Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DURA-BOND 8624988.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Pressure Control (EPC) Solenoid parts are listed for the 1997 Bentley Continental, from PA CARGO and ROSTRA.

Part numbers include PA CARGO 34605A and ROSTRA 520340.

This table covers the Pressure Switch manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

This group shows a single part: ROSTRA 501000.

This table covers the rebuild kits for this assembly. Read more

9 Rebuild Kit parts for the 1997 Bentley Continental come from 3 brands — PIONEER, ATP and TRANSTEC. The "Popular" part is PIONEER 753058.

The Deluxe Kit (Master Kit + Filter, Band & Common Bushings) section lists 2 options from PIONEER — grouped under the catalog's "Deluxe Kit (Master Kit + Filter, Band & Common Bushings)" designation — the notes column spells out what sets them apart. PIONEER 753058 is listed in this group.

In the Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) grade, ATP and PIONEER supply 4 parts: grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is ATP JM28.

The Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) section lists 3 options from TRANSTEC and PIONEER — grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. TRANSTEC 81000401 is listed in this group.

Listed part numbers: PIONEER 753058, PIONEER 753060 and ATP JM28, plus the other parts above.

This table covers the sealing rings inside this assembly. Read more

One part is listed for the 1997 Bentley Continental — TRANSGO 4L80EHTRK.

This table covers the Shift Improvement kits. Read more

TRANSGO supplies the 3 Shift Improvement Kit parts for the 1997 Bentley Continental.

The Daily Driver section lists 1 option from TRANSGO — grouped for everyday commuting duty. TRANSGO SK4L80E is listed in this group.

In the High Performance grade, TRANSGO supplies 2 parts: engineered beyond original-equipment specification. A representative part number is TRANSGO 4L80EHD2.

This group includes TRANSGO SK4L80E, TRANSGO 4L80EHD2 and TRANSGO 4L80E3.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Shift Shaft Seal parts for the 1997 Bentley Continental come from 2 brands — ACDELCO and SCHAEFFLER.

This group includes ACDELCO 8792S and SCHAEFFLER SS2114.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Shift Solenoid parts for the 1997 Bentley Continental come from 2 brands — ATP and ROSTRA.

This group includes ATP JE53 and ROSTRA 520356.

This table covers the Stator Support Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

DURA-BOND supplies the 3 Stator Support Shaft Bushing parts for the 1997 Bentley Continental.

Part numbers include DURA-BOND GMT41, DURA-BOND 8661614 and DURA-BOND GMT41A.

This table covers the Sun Gear bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

3 Sun Gear Bushing parts for the 1997 Bentley Continental come from DURA-BOND.

Part numbers include DURA-BOND 03131BRS, DURA-BOND 03131 and DURA-BOND 8623944.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

One part is listed for the 1997 Bentley Continental — TC REMANUFACTURING B82NS.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Torque Converter Clutch Solenoid parts are listed for the 1997 Bentley Continental, from PIONEER and ROSTRA.

Part numbers include PIONEER 771021 and ROSTRA 520241.

This table covers the Torque Converter Clutch valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Torque Converter Clutch Valve parts for the 1997 Bentley Continental come from TRANSGO.

This group includes TRANSGO 4L80ETCC and TRANSGO 48CCV.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

This group shows a single part: SCHAEFFLER SR3511.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SCHAEFFLER SS3040.