2000 Bentley Arnage Automatic Transmission Parts

This table covers the Actuator Feed Limit valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Actuator Feed Limit Valve parts for the 2000 Bentley Arnage come from TRANSGO.

Part numbers include TRANSGO 48ACTVL6 and TRANSGO 48ACTTL.

This table covers the apply bands inside the automatic transmission. Read more

One part is listed for the 2000 Bentley Arnage — BORG-WARNER 50236BW.

This table covers the Bearing kits. Read more

This group shows a single part: ZF 5961300594.

This table covers the Boost valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2000 Bentley Arnage — SONNAX 4L80ELB1.

This table covers the bushings in this assembly. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Bushing parts for the 2000 Bentley Arnage come from 2 brands — DURA-BOND and PIONEER.

This group includes DURA-BOND GMT42 and PIONEER 755189.

This table covers the Bushing kits. Read more

3 Bushing Kit parts for the 2000 Bentley Arnage come from DURA-BOND.

Listed part numbers: DURA-BOND TK4A, DURA-BOND TK4AEK and DURA-BOND TK4AHP.

This table covers the Case bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Case Bushing parts for the 2000 Bentley Arnage come from 2 brands — DURA-BOND and SONNAX.

This group includes DURA-BOND GMT44 and SONNAX 34006SPB.

This table covers the Center Support bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DURA-BOND 03118.

This table covers the Clutch hubs. Read more

This group shows a single part: SONNAX 3432202K.

This table covers the seals at the Clutch Pack Piston Dam. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2000 Bentley Arnage — ZF 1055298030.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

2 Clutch Plate Pack parts for the 2000 Bentley Arnage come from ZF.

In the Friction Plate Pack grade, ZF supplies 1 part: grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is ZF 1055298025.

The Steel Plate Pack section lists 1 option from ZF — grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. ZF 1055298027 is listed in this group.

Listed part numbers: ZF 1055298025 and ZF 1055298027.

This table covers the related components grouped with this assembly. Read more

8 Components parts for the 2000 Bentley Arnage come from SONNAX. The "Popular" part is SONNAX 3499801K.

Listed part numbers: SONNAX 3499801K, SONNAX 3420047K and SONNAX 3471601, plus the other parts above.

This table covers the Extension Housing bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Extension Housing Bearing parts for the 2000 Bentley Arnage come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.

The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS RB6009 is listed in this group.

In the Standard Replacement grade, BCA and NATIONAL supply 2 parts: built to original-equipment specification. A representative part number is BCA NB109.

Listed part numbers: WJB / INMOTION PARTS RB6009, BCA NB109 and NATIONAL 109.

This table covers the Extension Housing bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

3 Extension Housing Bushing parts for the 2000 Bentley Arnage come from DURA-BOND.

This group includes DURA-BOND 34005F, DURA-BOND 34066EXBR and DURA-BOND GMT45.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Extension Housing Seal parts are listed for the 2000 Bentley Arnage, from WJB / INMOTION PARTS, NATIONAL, SCHAEFFLER and 3 other brands. NATIONAL 9449 carries the "Popular" badge.

This group includes NATIONAL 9449, SCHAEFFLER SS2960 and ATP JO124 and the remaining parts above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

6 Filter parts for the 2000 Bentley Arnage come from 2 brands — ATP and PIONEER. The "Popular" part is ATP TF174.

The Economy section: 1 option from ATP. ATP TF174 is listed in this group.

Standard Replacement: 5 parts, from ATP and PIONEER. A representative part number is ATP B174.

This group includes ATP TF174, ATP B174 and ATP B395 and the remaining parts above.

This table covers the Fluid Pan bolts. Read more

This group shows a single part: ATP ZX221.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Fluid Pan Gasket parts for the 2000 Bentley Arnage come from 5 brands — ATP, FEL-PRO, MAHLE / CLEVITE and 2 other brands. The "Popular" part is ATP JG142.

Part numbers include ATP JG142, FEL-PRO TOS18698 and ATP NG39, among others listed above.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

6 Fluid Pump Bushing parts for the 2000 Bentley Arnage come from 2 brands — DURA-BOND and PIONEER. The "Popular" part is DURA-BOND 34001CSTG.

Part numbers include DURA-BOND 34001CSTG, DURA-BOND 34001CT and DURA-BOND 34001C, among others listed above.

This table covers the gaskets that seal the Fluid Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Fluid Pump Gasket parts are listed for the 2000 Bentley Arnage, from ATP and PIONEER.

This group includes ATP SG47 and PIONEER 749361.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

5 Fluid Pump Repair Sleeve parts are listed for the 2000 Bentley Arnage, from NATIONAL, WJB / INMOTION PARTS and BCA. NATIONAL 99157 carries the "Popular" badge.

Listed part numbers: NATIONAL 99157, BCA NS99157 and NATIONAL 99199, plus the other parts above.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Fluid Pump Seal parts are listed for the 2000 Bentley Arnage, from NATIONAL, BCA and WJB / INMOTION PARTS. NATIONAL 714598 carries the "Popular" badge.

Listed part numbers: NATIONAL 714598, BCA NS714598 and BCA NS224010, plus the other parts above.

This table covers the governors and modulators that control transmission shift pressure. Read more

This group shows a single part: TRANSGO 48MOD.

This table covers the Main shafts. Read more

One part is listed for the 2000 Bentley Arnage — SONNAX 3467205.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Manual Shaft Seal parts are listed for the 2000 Bentley Arnage, from NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 8792S, NATIONAL 710780 and WJB / INMOTION PARTS WS710780, among others listed above.

This table covers the Output Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2000 Bentley Arnage — DURA-BOND 8624988.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: ROSTRA 520340.

This table covers the Pressure Regulator valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: TRANSGO 5HP24PR.

This table covers the Pressure Switch manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

One part is listed for the 2000 Bentley Arnage — ROSTRA 501000.

This table covers the rebuild kits for this assembly. Read more

10 Rebuild Kit parts are listed for the 2000 Bentley Arnage, from PIONEER, ATP, TRANSTEC and 1 other brand. PIONEER 753058 carries the "Popular" badge.

In the Deluxe Kit (Master Kit + Filter, Band & Common Bushings) grade, PIONEER supplies 2 parts: grouped under the catalog's "Deluxe Kit (Master Kit + Filter, Band & Common Bushings)" designation — the notes column spells out what sets them apart. A representative part number is PIONEER 753058.

The Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) section lists 4 options from ATP and PIONEER — grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. ATP JM28 is listed in this group.

In the Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) grade, TRANSTEC, PIONEER and ZF supply 4 parts: grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. A representative part number is TRANSTEC 81000401.

This table covers the sealing rings inside this assembly. Read more

This group shows a single part: TRANSGO 4L80EHTRK.