2003 Bentley Continental Automatic Transmission Parts

This table covers the Actuator Feed Limit valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Actuator Feed Limit Valve parts for the 2003 Bentley Continental come from TRANSGO.

Part numbers include TRANSGO 48ACTVL6 and TRANSGO 48ACTTL.

This table covers the apply bands inside the automatic transmission. Read more

BORG-WARNER supplies both parts for the 2003 Bentley Continental.

Listed part numbers: BORG-WARNER 50236BW and BORG-WARNER 38014BW.

This table covers the Boost valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2003 Bentley Continental — SONNAX 4L80ELB1.

This table covers the bushings in this assembly. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Bushing parts for the 2003 Bentley Continental come from 2 brands — DURA-BOND and PIONEER.

Listed part numbers: DURA-BOND GMT42 and PIONEER 755189.

This table covers the Bushing kits. Read more

8 Bushing Kit parts for the 2003 Bentley Continental come from DURA-BOND.

Part numbers include DURA-BOND TK15, DURA-BOND TK15B and DURA-BOND TK15C, among others listed above.

This table covers the Case bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Case Bushing parts for the 2003 Bentley Continental come from 2 brands — DURA-BOND and SONNAX.

This group includes DURA-BOND GMT44 and SONNAX 34006SPB.

This table covers the Center Support bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Center Support Bushing parts for the 2003 Bentley Continental come from DURA-BOND.

Listed part numbers: DURA-BOND 02101 and DURA-BOND 03118.

This table covers the Clutch hubs. Read more

This group shows a single part: SONNAX 3432202K.

This table covers the related components grouped with this assembly. Read more

8 Components parts for the 2003 Bentley Continental come from SONNAX. The "Popular" part is SONNAX 3499801K.

Part numbers include SONNAX 3499801K, SONNAX 3420047K and SONNAX 3471601, among others listed above.

This table covers the Extension Housing bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DURA-BOND 34005F.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Extension Housing Seal parts are listed for the 2003 Bentley Continental, from WJB / INMOTION PARTS, NATIONAL, SCHAEFFLER and 3 other brands. NATIONAL 9449 carries the "Popular" badge.

This group includes NATIONAL 9449, SCHAEFFLER SS2960 and ATP JO124 and the remaining parts above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

7 Filter parts for the 2003 Bentley Continental come from 3 brands — ATP, PIONEER and RAYBESTOS POWERTRAIN. The "Popular" part is ATP B174.

The Economy section lists 1 option from ATP — the catalog's value-priced group. ATP TF174 is listed in this group.

In the Standard Replacement grade, ATP and PIONEER supply 4 parts: built to original-equipment specification. A representative part number is ATP B174.

2 further parts sit outside the graded sections, with the same engine-level match.

Part numbers include ATP B174, ATP TF174 and ATP B395, among others listed above.

This table covers the Fluid Pan bolts. Read more

This group shows a single part: ATP ZX224.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Fluid Pan Gasket parts for the 2003 Bentley Continental come from 6 brands — ATP, FEL-PRO, ELRING and 3 other brands. The "Popular" part is ATP JG142.

This group includes ATP JG142, FEL-PRO TOS18698 and ELRING 357310 and the remaining parts above.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

4 Fluid Pump Bushing parts for the 2003 Bentley Continental come from 2 brands — DURA-BOND and PIONEER.

Part numbers include DURA-BOND 34001, DURA-BOND 34001CSTG and DURA-BOND 34001C, among others listed above.

This table covers the gaskets that seal the Fluid Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Fluid Pump Gasket parts are listed for the 2003 Bentley Continental, from ATP and PIONEER.

This group includes ATP SG47 and PIONEER 749361.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

2 Fluid Pump Repair Sleeve parts are listed for the 2003 Bentley Continental, from NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 99199 and WJB / INMOTION PARTS WS99199.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Fluid Pump Seal parts are listed for the 2003 Bentley Continental, from BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS714598, NATIONAL 714598 and WJB / INMOTION PARTS WS714598.

This table covers the governors and modulators that control transmission shift pressure. Read more

This group shows a single part: TRANSGO 48MOD.

This table covers the Main shafts. Read more

One part is listed for the 2003 Bentley Continental — SONNAX 3467205.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Manual Shaft Seal parts are listed for the 2003 Bentley Continental, from NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 8792S and WJB / INMOTION PARTS WS8792S.

This table covers the O-rings and seals at this joint. Read more

One part is listed for the 2003 Bentley Continental — ELRING 821500.

This table covers the Output Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2003 Bentley Continental — DURA-BOND 8624988.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

This group shows a single part: BCA NS99139.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Output Shaft Seal parts for the 2003 Bentley Continental come from 2 brands — ELRING and SCHAEFFLER.

Part numbers include ELRING 063990 and SCHAEFFLER SS2450.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Pressure Control (EPC) Solenoid parts for the 2003 Bentley Continental come from 2 brands — PA CARGO and ROSTRA.

This group includes PA CARGO 34605A and ROSTRA 520340.

This table covers the Pressure Switch manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

One part is listed for the 2003 Bentley Continental — ROSTRA 501000.

This table covers the rebuild kits for this assembly. Read more

9 Rebuild Kit parts are listed for the 2003 Bentley Continental, from PIONEER, ATP and TRANSTEC. PIONEER 753058 carries the "Popular" badge.

In the Deluxe Kit (Master Kit + Filter, Band & Common Bushings) grade, PIONEER supplies 2 parts: grouped under the catalog's "Deluxe Kit (Master Kit + Filter, Band & Common Bushings)" designation — the notes column spells out what sets them apart. A representative part number is PIONEER 753058.

The Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) section lists 4 options from ATP and PIONEER — grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. ATP JM28 is listed in this group.

In the Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) grade, TRANSTEC and PIONEER supply 3 parts: grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. A representative part number is TRANSTEC 81000401.

This group includes PIONEER 753058, PIONEER 753060 and ATP JM28 and the remaining parts above.

This table covers the sealing rings inside this assembly. Read more

This group shows a single part: TRANSGO 4L80EHTRK.

This table covers the Shift Improvement kits. Read more

3 Shift Improvement Kit parts for the 2003 Bentley Continental come from TRANSGO.

In the Daily Driver grade, TRANSGO supplies 1 part: grouped for everyday commuting duty. A representative part number is TRANSGO SK4L80E.

The High Performance section lists 2 options from TRANSGO — engineered beyond original-equipment specification. TRANSGO 4L80EHD2 is listed in this group.

Part numbers include TRANSGO SK4L80E, TRANSGO 4L80EHD2 and TRANSGO 4L80E3.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Shift Shaft Seal parts are listed for the 2003 Bentley Continental, from ACDELCO and SCHAEFFLER.

This group includes ACDELCO 8792S and SCHAEFFLER SS2114.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Shift Solenoid parts are listed for the 2003 Bentley Continental, from ATP and ROSTRA.

This group includes ATP JE53 and ROSTRA 520356.

This table covers the Stator Support Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

3 Stator Support Shaft Bushing parts for the 2003 Bentley Continental come from DURA-BOND.

Part numbers include DURA-BOND GMT41, DURA-BOND 8661614 and DURA-BOND GMT41A.

This table covers the Sun Gear bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2003 Bentley Continental — DURA-BOND 03131.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

This group shows a single part: TC REMANUFACTURING B82NS.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Torque Converter Clutch Solenoid parts for the 2003 Bentley Continental come from 2 brands — PIONEER and ROSTRA.

Listed part numbers: PIONEER 771021 and ROSTRA 520241.

This table covers the Torque Converter Clutch valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

TRANSGO supplies both parts for the 2003 Bentley Continental.

This group includes TRANSGO 4L80ETCC and TRANSGO 48CCV.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

2 Torque Converter Repair Sleeve parts are listed for the 2003 Bentley Continental, from BCA and SCHAEFFLER.

Part numbers include BCA NS99157 and SCHAEFFLER SR3511.