2011 Bentley Mulsanne Ignition Parts

Engine:
6.8L V8 Turbocharged

18 Ignition parts are listed for the 2011 Bentley Mulsanne, in 4 part types, covering the 6.8L V8 Turbocharged engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 2011 Bentley Mulsanne, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Most of the listed parts are Spark Plug (12 parts), Crankshaft Position Sensor (3 parts) and Camshaft Position Sensor (2 parts). The other 1 part type covers the remaining 1 part.

Camshaft Position Sensor

Brand Part Number Markets Notes Buy
BOSCH 0232103097
🇺🇸 US 🇨🇦 CA
Engine Camshaft Position Sensor
View on
Amazon
FACET 90619
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.

Crankshaft Position Sensor

Brand Part Number Markets Notes Buy
BOSCH 0261210383
🇺🇸 US 🇨🇦 CA
Engine Crankshaft Position Sensor
View on
Amazon
BOSCH 0261210329
🇺🇸 US 🇨🇦 CA
Engine Crank Angle Sensor
View on
Amazon
MARELLI SAG243
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.

Spark Plug

Summary: Notes include pre-set gaps of 0.031", 0.032", 0.035", 0.039", 0.044" and 0.045". Replacement brands in this table include CHAMPION, MOTORCRAFT and ACDELCO.

Copper / Nickel

Brand Part Number Markets Notes Buy
ACDELCO Popular 41629
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO 41629
ProfessionalConventionalPre-Set Gap: 0.035"
Original Equipment-Recommended Gap: .032
View on
Amazon
CHAMPION Popular 71
🇺🇸 US 🇨🇦 CA
Copper PlusPre-Set Gap: 0.035"
Fitment notes — CHAMPION 71
Copper PlusPre-Set Gap: 0.035"
OE-Recommended Gap: 0.032"
View on
Amazon
CHAMPION 71S
🇺🇸 US 🇨🇦 CA
OE-Recommended Gap: 0.032"
View on
Amazon
CHAMPION 711
🇺🇸 US 🇨🇦 CA
Copper Plus
Fitment notes — CHAMPION 711
Copper Plus
OE-Recommended Gap: 0.032"
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO 41800
🇺🇸 US 🇨🇦 CA
GM Original EquipmentDouble Platinum
Fitment notes — ACDELCO 41800
GM Original EquipmentDouble PlatinumPre-Set Gap: 0.045"
OE-Recommended Gap: 0.032 (in)
View on
Amazon
CHAMPION 7071
🇺🇸 US 🇨🇦 CA
Double Platinum PowerPre-Set Gap: 0.044"
Fitment notes — CHAMPION 7071
Double Platinum PowerPre-Set Gap: 0.044"
OE-Recommended Gap: 0.032"
View on
Amazon
MOTORCRAFT SP485
🇺🇸 US 🇨🇦 CA
Double Platinum
Fitment notes — MOTORCRAFT SP485
Double Platinum
OE Style.032"/0.8mm
View on
Amazon

Iridium (lasts up to 4x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
SKP Popular SP1013
🇺🇸 US 🇨🇦 CA
Iridium XP
Fitment notes — SKP SP1013
Iridium XP
Gap 0.031 (In)
View on
Amazon
CHAMPION 9201
🇺🇸 US 🇨🇦 CA
IridiumPre-Set Gap: 0.039"
Fitment notes — CHAMPION 9201
IridiumPre-Set Gap: 0.039"
OE-Recommended Gap: 0.032"
View on
Amazon

Platinum (lasts up to 2x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
CHAMPION 3071
🇺🇸 US 🇨🇦 CA
Platinum PowerInstalled Height (Inch): 2.07 In
Fitment notes — CHAMPION 3071
Platinum PowerInstalled Height (Inch): 2.07 InPre-Set Gap: 0.035"
OE-Recommended Gap: 0.032"
View on
Amazon
MOTORCRAFT SP497X
🇺🇸 US 🇨🇦 CA
Platinum Spark PlugPlatinum
Fitment notes — MOTORCRAFT SP497X
Platinum Spark PlugPlatinumGround Electrode Tip Material: Nickel
.032"/0.8mm
View on
Amazon
MOTORCRAFT SP485X
🇺🇸 US 🇨🇦 CA
Platinum Spark PlugPlatinum
Fitment notes — MOTORCRAFT SP485X
Platinum Spark PlugPlatinumGround Electrode Tip Material: Platinum
OE Style.032"/0.8mm
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Spark Plug Wire

Brand Part Number Markets Notes Buy
KARLYN / BREMI / STI 827
🇺🇸 US 🇨🇦 CA
Bremi-STI
View on
Amazon

This table covers the Spark Plug wires.

Buying Ignition Parts for a 2011 Bentley Mulsanne

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 6.8L V8 Turbocharged engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Spark Plug and Crankshaft Position Sensor .

Frequently Asked Questions

How many ignition parts fit the 2011 Bentley Mulsanne?

Our catalog currently lists 18 ignition parts for the 2011 Bentley Mulsanne across 4 subcategories and 8 brands, covering the 6.8L V8 Turbocharged engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 2011 Bentley Mulsanne?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 2011 Bentley Mulsanne?

Notes on this page include pre-set gaps of 0.031", 0.032", 0.035", 0.039", 0.044" and 0.045". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2011 Bentley Mulsanne was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2011 Bentley Mulsanne?

Every part on this page is matched to the 6.8L V8 Turbocharged engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2011 Bentley Mulsanne

Ignition Parts for Other Bentley Mulsanne Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.