2013 Bentley Continental Automatic Transmission Parts

This table covers the Bushing kits. Read more

DURA-BOND supplies the 4 Bushing Kit parts for the 2013 Bentley Continental. 3 parts fit every engine; the other 1 is engine-specific.

Part numbers include DURA-BOND TK15, DURA-BOND TK15B and DURA-BOND TK15C, among others listed above.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Extension Housing Seal parts for the 2013 Bentley Continental come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 710487 and WJB / INMOTION PARTS WS710487.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

3 Filter parts are listed for the 2013 Bentley Continental, from PA CARGO, ATP and RAYBESTOS POWERTRAIN. 2 parts fit every engine; the other 1 is engine-specific.

In the Economy grade, PA CARGO supplies 1 part: the catalog's value-priced group. A representative part number is PA CARGO 116710E.

The Standard Replacement section lists 2 options from ATP and RAYBESTOS POWERTRAIN — built to original-equipment specification. ATP B409 is listed in this group.

Part numbers include PA CARGO 116710E, ATP B409 and RAYBESTOS POWERTRAIN 515970B.

This table covers the pans that hold automatic-transmission fluid. Read more

2 Fluid Pan parts for the 2013 Bentley Continental come from ZF. Every part fits both the 4.0L V8 Turbocharged and the 6.0L W12 Turbocharged.

Listed part numbers: ZF 1091298066 and ZF 1091298067.

This table covers the Fluid Pan bolts. Read more

One part is listed for the 2013 Bentley Continental — ATP ZX224.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2013 Bentley Continental — ELRING 357310.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Fluid Pump Seal parts for the 2013 Bentley Continental come from 2 brands — NATIONAL and WJB / INMOTION PARTS. Every part fits both the 4.0L V8 Turbocharged and the 6.0L W12 Turbocharged.

Part numbers include NATIONAL 710939 and WJB / INMOTION PARTS WS710939.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Manual Shaft Seal parts for the 2013 Bentley Continental come from 2 brands — NATIONAL and WJB / INMOTION PARTS. Every part fits both the 4.0L V8 Turbocharged and the 6.0L W12 Turbocharged.

Listed part numbers: NATIONAL 710780 and WJB / INMOTION PARTS WS710780.

This table covers the O-rings and seals at this joint. Read more

2 O-Rings & Seals parts for the 2013 Bentley Continental come from ELRING. Every part fits both the 4.0L V8 Turbocharged and the 6.0L W12 Turbocharged.

Part numbers include ELRING 821500 and ELRING 490280.

This table covers the Output Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Output Shaft Bushing parts for the 2013 Bentley Continental come from DURA-BOND. Every part fits both the 4.0L V8 Turbocharged and the 6.0L W12 Turbocharged.

Listed part numbers: DURA-BOND ZFT111BR and DURA-BOND ZFT110BR.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

3 Output Shaft Repair Sleeve parts are listed for the 2013 Bentley Continental, from BCA, NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2013 Continental.

This group includes BCA NS99139, NATIONAL 99139 and WJB / INMOTION PARTS WS99139.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Output Shaft Seal parts are listed for the 2013 Bentley Continental, from NATIONAL, BCA, ELRING and 2 other brands. NATIONAL 223510 carries the "Popular" badge. All of them fit every engine offered in the 2013 Continental.

Listed part numbers: NATIONAL 223510, NATIONAL 710671 and BCA NS223510, plus the other parts above.

This table covers the rebuild kits for this assembly. Read more

2 Rebuild Kit parts for the 2013 Bentley Continental come from TRANSTEC.

This group includes TRANSTEC 49384090 and TRANSTEC 81000275.

This table covers the Shift Improvement kits. Read more

3 Shift Improvement Kit parts are listed for the 2013 Bentley Continental, from TRANSGO and SONNAX.

Part numbers include SONNAX ZF8ZIP, TRANSGO SK6R80A and TRANSGO SK6R80.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: ZF 1087298390.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

ZF supplies both parts for the 2013 Bentley Continental.

Part numbers include ZF 1091322120 and ZF 1091322139.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

3 Torque Converter Repair Sleeve parts for the 2013 Bentley Continental come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS99157, NATIONAL 99157 and WJB / INMOTION PARTS WS99157.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Torque Converter Shaft Seal parts for the 2013 Bentley Continental come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS224040, NATIONAL 224040 and WJB / INMOTION PARTS WS224040.