6 Suspension parts are listed for the 2017 Bentley Mulsanne, in 3 part types, covering the 6.8L V8 Turbocharged engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2017 Bentley Mulsanne, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links. All 6 listed parts are Air Compressor (4 parts), Air Suspension Line Connector / Fitting (1 part) and Air Suspension Solenoid / Valve (1 part).
Every part on this page is matched to the 6.8L V8 Turbocharged — the only engine offered in the 2017 Bentley Mulsanne.
The most listed brands for 2017 Bentley Mulsanne suspension parts are ARNOTT (2 parts), MONROE (2 parts) and WESTAR (2 parts).
Each part number listed for the 2017 Bentley Mulsanne opens a page with every vehicle that part fits.
Air Compressor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARNOTT | P2986 | 🇺🇸 US 🇨🇦 CA | ArnottAir Suspension Compressor | View on Amazon |
| MONROE | AC10001 | 🇺🇸 US 🇨🇦 CA | with Mounting Bracket | View on Amazon |
| MONROE | AC10002 | 🇺🇸 US 🇨🇦 CA | without Mounting Brackets | View on Amazon |
| WESTAR | CD7748 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Air compressors. Typical signs include no cold air, rapid clutch cycling, or a growl when the clutch engages. Replace the drier and evacuate the system whenever the circuit is opened.
4 Air Compressor parts for the 2017 Bentley Mulsanne come from 3 brands — MONROE, ARNOTT and WESTAR.
Listed part numbers: ARNOTT P2986, MONROE AC10001 and MONROE AC10002, plus the other parts above.
Air Suspension Line Connector / Fitting
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARNOTT | K4362 | 🇺🇸 US 🇨🇦 CA | Fits FrontAt Strut | View on Amazon |
This table covers the Air Suspension Line Connector fittings.
One part is listed for the 2017 Bentley Mulsanne — ARNOTT K4362.
Air Suspension Solenoid / Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WESTAR | CV0012 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Air Suspension Solenoid valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
This group shows a single part: WESTAR CV0012.
Buying Suspension Parts for a 2017 Bentley Mulsanne
On this vehicle, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links.
- Confirm you have the 6.8L V8 Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Air Compressor and Air Suspension Line Connector / Fitting .
Frequently Asked Questions
How many suspension parts fit the 2017 Bentley Mulsanne?
Our catalog currently lists 6 suspension parts for the 2017 Bentley Mulsanne across 3 subcategories and 3 brands, covering the 6.8L V8 Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of suspension problems on a 2017 Bentley Mulsanne?
Common symptoms include clunks over speed bumps, wandering steering, cupped tire wear, or a nose that keeps bouncing after a dip. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2017 Bentley Mulsanne was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2017 Bentley Mulsanne?
Every part on this page is matched to the 6.8L V8 Turbocharged engine. Then worn bushings often mimic bad shocks — inspect before buying, and remember loaded vs unloaded strut assemblies differ in labor by hours. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2017 Bentley Mulsanne
Suspension Parts for Other Bentley Mulsanne Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.