1960 Berkeley QB95 Ignition Parts

Engine:
692cc L2

8 Ignition parts are listed for the 1960 Berkeley QB95, in 1 part type, covering the 692cc L2 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 1960 Berkeley QB95, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Every listed part is a Spark Plug.

Spark Plug

Summary: Notes include pre-set gaps of 0.020", 0.025", 0.026", 0.030", 0.032", 0.034" and 0.04". Replacement brands in this table include CHAMPION, AUTOLITE and ACDELCO.

Brand Part Number Markets Notes Buy
ACDELCO Popular R44XL
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R44XL
ProfessionalConventionalPre-Set Gap: 0.034"
Original Equipment-Recommended Gap: .0203/4" Reach
View on
Amazon
CHAMPION Popular 120
🇺🇸 US
Copper PlusPre-Set Gap: 0.026"
Fitment notes — CHAMPION 120
Copper PlusPre-Set Gap: 0.026"
3/4" Reach Spark PlugsOE-Recommended Gap: 0.020"Non-Resistor Plug
View on
Amazon
AUTOLITE 4093
🇺🇸 US
Copper Non-ResistorPre-Set Gap: 0.030"
Fitment notes — AUTOLITE 4093
Copper Non-ResistorPre-Set Gap: 0.030"
Gap .020 (In) 0.5 (mm)1/2 In Reach Spark PlugsOE Style
View on
Amazon
AUTOLITE 404
🇺🇸 US
Copper ResistorPre-Set Gap: 0.034"
Fitment notes — AUTOLITE 404
Copper ResistorPre-Set Gap: 0.034"
Gap .020 (In) 0.5 (mm)3/4 In Reach Spark PlugsOE Style
View on
Amazon
CHAMPION 811
🇺🇸 US
Copper PlusPre-Set Gap: 0.032"
Fitment notes — CHAMPION 811
Copper PlusPre-Set Gap: 0.032"
1/2" Reach Spark PlugsNon-Resistor TypeOE-Recommended Gap: 0.020"
View on
Amazon
CHAMPION 123
🇺🇸 US
Copper PlusPre-Set Gap: 0.025"
Fitment notes — CHAMPION 123
Copper PlusPre-Set Gap: 0.025"
3/4" Reach Spark PlugsOE-Recommended Gap: 0.020"Resistor Plug
View on
Amazon
CHAMPION 9311
🇺🇸 US
Copper PlusPre-Set Gap: 0.04"
Fitment notes — CHAMPION 9311
Copper PlusPre-Set Gap: 0.04"
1/2" Reach Spark PlugsOE-Recommended Gap: 0.020"
View on
Amazon
MOTORCRAFT SP466
🇺🇸 US
Copper
Fitment notes — MOTORCRAFT SP466
Copper
OE Style3/4" Reach.020"/0.5mm
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1960 Berkeley QB95

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 692cc L2 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Spark Plug .

Frequently Asked Questions

How many ignition parts fit the 1960 Berkeley QB95?

Our catalog currently lists 8 ignition parts for the 1960 Berkeley QB95 across 1 subcategory and 4 brands, covering the 692cc L2 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1960 Berkeley QB95?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1960 Berkeley QB95?

Notes on this page include pre-set gaps of 0.020", 0.025", 0.026", 0.030", 0.032", 0.034" and 0.04". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1960 Berkeley QB95 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1960 Berkeley QB95?

Every part on this page is matched to the 692cc L2 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1960 Berkeley QB95

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.