1969 Bizzarrini GT Strada 5300 Engine Parts

Engine:
5.4L V8

The 1969 Bizzarrini GT Strada 5300 has 93 engine parts with verified fitment on this page — 20 part types and 5 brands, covering the 5.4L V8 engine. Each part includes a manufacturer part number and application notes.

On the 1969 Bizzarrini GT Strada 5300, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Valve Cover Gasket (12 parts), Cylinder Head Gasket (9 parts) and Oil Pan Gasket (9 parts). The other 17 part types cover the remaining 63 parts.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
ENGINE PRO 3777332
🇺🇸 US
View on
Amazon
FEL-PRO CS77332
🇺🇸 US
Multi-PieceRear Main Seal Not Included
View on
Amazon
MAHLE / CLEVITE CS1178
🇺🇸 US
Includes 2 Piece Rear Main Seal
Fitment notes — MAHLE / CLEVITE CS1178
Includes 2 Piece Rear Main Seal
Use with Head Set to Make Full Set
View on
Amazon
VICTOR REINZ 081005601
🇺🇸 US
with 2 Piece Rear Main Seal
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Seal

Brand Part Number Markets Notes Buy
FEL-PRO Popular BS40013
🇺🇸 US
Rubber
Fitment notes — FEL-PRO BS40013
Rubber
RearDouble lipTwo Piece
View on
Amazon
FEL-PRO BS118291
🇺🇸 US
Rubber
Fitment notes — FEL-PRO BS118291
Rubber
RearTwo PieceOffset double lip
View on
Amazon
MAHLE / CLEVITE JV1627
🇺🇸 US
RubberSet
Fitment notes — MAHLE / CLEVITE JV1627
RubberSet
2 Piece, Lip Relocator TypeRear
View on
Amazon
VICTOR REINZ 191006901
🇺🇸 US
Set
Fitment notes — VICTOR REINZ 191006901
Set
RearOffset double lip
View on
Amazon
VICTOR REINZ 191011601
🇺🇸 US
SetRubber
Fitment notes — VICTOR REINZ 191011601
SetRubber
RearOffset double lip2 Piece
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
FEL-PRO ES72856
🇺🇸 US
Set
View on
Amazon
MAHLE / CLEVITE GS33285
🇺🇸 US
Cylinder Head Bolt KitSet
Fitment notes — MAHLE / CLEVITE GS33285
Cylinder Head Bolt KitSetSteel
View on
Amazon
VICTOR REINZ 141004801
🇺🇸 US
Set
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular 7733PT2
🇺🇸 US
Permatorque
View on
Amazon
FEL-PRO Popular 501SD
🇺🇸 US
Permatorque Severe Duty
View on
Amazon
ENGINE PRO 281000
🇺🇸 US
View on
Amazon
FEL-PRO 7733SH1
🇺🇸 US
with Embossed Steel Head Gaskets
View on
Amazon
FEL-PRO 8651PT
🇺🇸 US
with High Performance Engine
View on
Amazon
MAHLE / CLEVITE 1178BS
🇺🇸 US
Beaded Steel
View on
Amazon
MAHLE / CLEVITE 1178VC
🇺🇸 US
Composite
View on
Amazon
MAHLE / CLEVITE 1178SG
🇺🇸 US
Graphite
Fitment notes — MAHLE / CLEVITE 1178SG
Graphite
4.160 IN Combustion Chamber Openingwith Contoured Combustion Chamberwith Stainless Steel Flanges
View on
Amazon
VICTOR REINZ 611031900
🇺🇸 US
0.045 IN Thick
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
FEL-PRO Popular HS7733PT2
🇺🇸 US
2-1/2 (In) Inside Diameter & 2-17/32 (In) Inside Diameter Exhaust Pipe Packing Not Included.2-17/32 (In) Inside Diameter Exhaust Pipe Packing Not Included
Fitment notes — FEL-PRO HS7733PT2
2-1/2 (In) Inside Diameter & 2-17/32 (In) Inside Diameter Exhaust Pipe Packing Not Included.2-17/32 (In) Inside Diameter Exhaust Pipe Packing Not IncludedPermatorqueIncludes Gasket, EGR Adapter Gasket
View on
Amazon
FEL-PRO Popular HS7733SH2
🇺🇸 US
with Embossed Steel Head Gaskets2-17/32 (In) Inside Diameter Exhaust Pipe Packing Not Included
View on
Amazon
FEL-PRO HS7733PT2VK
🇺🇸 US
2-1/2 (In) Inside Diameter & 2-17/32 (In) Inside Diameter Exhaust Pipe Packing Not Included.Permatorque
Fitment notes — FEL-PRO HS7733PT2VK
2-1/2 (In) Inside Diameter & 2-17/32 (In) Inside Diameter Exhaust Pipe Packing Not Included.PermatorqueIncludes Head Bolts, Gasket, EGR Adapter Gasket
Head bolt replacement recommended
View on
Amazon
FEL-PRO HS7733SH2VK
🇺🇸 US
2-17/32 (In) Inside Diameter Exhaust Pipe Packing Not Includedwith Embossed Steel Head Gaskets
Fitment notes — FEL-PRO HS7733SH2VK
2-17/32 (In) Inside Diameter Exhaust Pipe Packing Not Includedwith Embossed Steel Head GasketsIncludes Head BoltsIncludes Valve Stem Seals or Valve Stem Seals Not Included
Head bolt replacement recommended
View on
Amazon
MAHLE / CLEVITE HS1178BJ
🇺🇸 US
Contains Beaded Steel Cylinder Head GasketIncludes Valve Stem Seals
View on
Amazon
MAHLE / CLEVITE HS1178VJ
🇺🇸 US
Contains Composite Cylinder Head Gasket, Exhaust Pipe Gasket Not IncludedIncludes Valve Stem Seals
View on
Amazon
VICTOR REINZ 021007601
🇺🇸 US
with Multi-Layer Steel Head Gasket
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Cylinder Head Spacer Shim

Brand Part Number Markets Notes Buy
VICTOR REINZ 711382900
🇺🇸 US
View on
Amazon

This table covers the Cylinder Head Spacer shims.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
FEL-PRO FS7733PT2
🇺🇸 US
2-17/32 (In) Inside Diameter Exhaust Pipe Packing Not IncludedOverhaul Set
Fitment notes — FEL-PRO FS7733PT2
2-17/32 (In) Inside Diameter Exhaust Pipe Packing Not IncludedOverhaul SetPermatorqueRear Main Seal Not IncludedDoes Not Include Intake Manifold Gaskets
View on
Amazon
FEL-PRO FS7733SH2
🇺🇸 US
Overhaul SetRear Main Seal Not Included
Fitment notes — FEL-PRO FS7733SH2
Overhaul SetRear Main Seal Not Includedwith Embossed Steel Head Gaskets2-17/32 (In) Inside Diameter Exhaust Pipe Packing Not IncludedDoes Not Include Intake Manifold Gaskets
View on
Amazon
MAHLE / CLEVITE FS1178BJ
🇺🇸 US
Contains Beaded Steel Cylinder Head GasketFull Gasket Set
View on
Amazon
VICTOR REINZ 011004401
🇺🇸 US
Multi Layered Steel
Fitment notes — VICTOR REINZ 011004401
Multi Layered Steel
Full Gasket Set
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Harmonic Balancer Repair Sleeve

Brand Part Number Markets Notes Buy
FEL-PRO 16202
🇺🇸 US
Use with Installation Tool
View on
Amazon
MAHLE / CLEVITE A228
🇺🇸 US
Nickel Plated Formed Steel
Fitment notes — MAHLE / CLEVITE A228
Nickel Plated Formed Steel
0.013 IN Thickness
View on
Amazon
VICTOR REINZ 711347500
🇺🇸 US
View on
Amazon

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
FEL-PRO MS903142
🇺🇸 US
Set
Fitment notes — FEL-PRO MS903142
Set
Lower
View on
Amazon
MAHLE / CLEVITE MS15315
🇺🇸 US
CompositeContains One Crossover Restrictor
View on
Amazon
VICTOR REINZ 111015801
🇺🇸 US
Set
Fitment notes — VICTOR REINZ 111015801
Set
with 1 Set of Crossover Restrictors
View on
Amazon
VICTOR REINZ 111062601
🇺🇸 US
Set
Fitment notes — VICTOR REINZ 111062601
Set
with 2 Sets of Crossover Restrictors
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
FEL-PRO 70822
🇺🇸 US
0.500 (in) Inside Diameter x 0.900 (in) Outside DiameterFlat Washer
Fitment notes — FEL-PRO 70822
0.500 (in) Inside Diameter x 0.900 (in) Outside DiameterFlat WasherPlastic
View on
Amazon
MAHLE / CLEVITE 2051
🇺🇸 US
Composite
Fitment notes — MAHLE / CLEVITE 2051
Composite
with 1/2 IN I.D., with English Threads
View on
Amazon
VICTOR REINZ 711346200
🇺🇸 US
0.500 IN Inside Diameter
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular OS5197C2
🇺🇸 US
Cork
View on
Amazon
FEL-PRO Popular OS34509T
🇺🇸 US
PermadryplusIncludes Snaps
View on
Amazon
FEL-PRO OS5197C4
🇺🇸 US
CorkExhaust Pipe Flange Gasket Included
View on
Amazon
MAHLE / CLEVITE OS30568X
🇺🇸 US
Cork-Rubber
View on
Amazon
MAHLE / CLEVITE OS30568XTC
🇺🇸 US
Cork with Metal Carrier
View on
Amazon
MAHLE / CLEVITE OS32458
🇺🇸 US
Rubber with Plastic Carrier
View on
Amazon
VICTOR REINZ 101017001
🇺🇸 US
18 Bolt PanExcept Exhaust Pipe Packing
View on
Amazon
VICTOR REINZ 101010401
🇺🇸 US
with Exhaust Pipe Packing
View on
Amazon
VICTOR REINZ 101007901
🇺🇸 US
Improved Design
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump Shaft Guide / Retainer

Brand Part Number Markets Notes Buy
FEL-PRO 72665
🇺🇸 US
View on
Amazon
MAHLE / CLEVITE H31354
🇺🇸 US
NylonRetainer Material: Plastic
View on
Amazon
VICTOR REINZ 711403800
🇺🇸 US
Distributor to oil pump shaft retainer
View on
Amazon

This table covers the Oil Pump Shaft Guide retainers.

Piston

Brand Part Number Markets Notes Buy
SILV-O-LITE 1423
🇺🇸 US
Offset Pin ConfigurationPress Pin Type
Fitment notes — SILV-O-LITE 1423
Offset Pin ConfigurationPress Pin TypeFlat Top
View on
Amazon

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.

Piston Ring

Premium

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE S40564CP
🇺🇸 US
PremiumMaterial Carbon Steel / Cast Iron / Stainless Steel
Fitment notes — MAHLE / CLEVITE S40564CP
PremiumMaterial Carbon Steel / Cast Iron / Stainless SteelSingle Cylinder SetAxial Height: 5/64in / 5/64in / 3/16inFacing: Plasma-Moly / Chrome
View on
Amazon
MAHLE / CLEVITE 40564CP
🇺🇸 US
PremiumMaterial Carbon Steel / Cast Iron / Stainless Steel
Fitment notes — MAHLE / CLEVITE 40564CP
PremiumMaterial Carbon Steel / Cast Iron / Stainless SteelSetAxial Height: 5/64in / 5/64in / 3/16inFacing: Plasma-Moly / Chrome
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE S50564CP
🇺🇸 US
Single Cylinder SetChrome Facing
Fitment notes — MAHLE / CLEVITE S50564CP
Single Cylinder SetChrome FacingMaterial Cast Iron / Cast Iron / Stainless SteelAxial Height: 5/64in / 5/64in / 3/16inBore Diameter (In): 4.000
View on
Amazon
MAHLE / CLEVITE 50564CP
🇺🇸 US
SetChrome Facing
Fitment notes — MAHLE / CLEVITE 50564CP
SetChrome FacingBore Diameter (In): 4.000Material Cast Iron / Cast Iron / Stainless SteelAxial Height: 5/64in / 5/64in / 3/16in
View on
Amazon

This table covers the rings that seal each piston to the cylinder wall.

Timing Cover Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular TCS51241
🇺🇸 US
Repair Sleeve Not Included
View on
Amazon
MAHLE / CLEVITE Popular T27781
🇺🇸 US
Paper
View on
Amazon
FEL-PRO TCS45165
🇺🇸 US
with Sleeve 'N' Seal
View on
Amazon
MAHLE / CLEVITE JV779
🇺🇸 US
SetContains Extended Case Lip Relocator Timing Cover Seal
Fitment notes — MAHLE / CLEVITE JV779
SetContains Extended Case Lip Relocator Timing Cover Seal
Repair Sleeve Not Required
View on
Amazon
MAHLE / CLEVITE JV779TC
🇺🇸 US
Contains 1/4in Thick Front End StripsSet
View on
Amazon
MAHLE / CLEVITE JV919
🇺🇸 US
SetIncludes Repair Sleeve
View on
Amazon
VICTOR REINZ 151034001
🇺🇸 US
Set
Fitment notes — VICTOR REINZ 151034001
Set
without Sleeve
View on
Amazon
VICTOR REINZ 151026301
🇺🇸 US
SetDoes Not Include RTV
Fitment notes — VICTOR REINZ 151026301
SetDoes Not Include RTV
with Repair Sleeve
View on
Amazon

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Timing Cover Repair Sleeve Tool

Brand Part Number Markets Notes Buy
FEL-PRO 16312
🇺🇸 US
View on
Amazon

This table covers the Timing Cover Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes.

Timing Cover Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE 65022
🇺🇸 US
Rubber1/2" Wide
Fitment notes — MAHLE / CLEVITE 65022
Rubber1/2" Wide
1/2 IN Wide, Lip Relocator Type
View on
Amazon
MAHLE / CLEVITE 49328
🇺🇸 US
Rubber3/8" Wide
Fitment notes — MAHLE / CLEVITE 49328
Rubber3/8" Wide
3/8 IN Wide
View on
Amazon
VICTOR REINZ 191035801
🇺🇸 US
View on
Amazon

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Valve Cover Gasket

Premium

Brand Part Number Markets Notes Buy
FEL-PRO Popular VS12869T
🇺🇸 US
Permadryplus
View on
Amazon
VICTOR REINZ 151057501
🇺🇸 US
SetImproved Design
Fitment notes — VICTOR REINZ 151057501
SetImproved Design
Rigid Carrier
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
FEL-PRO Popular VS12869
🇺🇸 US
Cork
Fitment notes — FEL-PRO VS12869
Cork
5/32 (in) Thick
View on
Amazon
FEL-PRO Popular VS12869R
🇺🇸 US
Rubber
View on
Amazon
FEL-PRO VS12869AC
🇺🇸 US
Cork
Fitment notes — FEL-PRO VS12869AC
Cork
7/32 (in) Thick
View on
Amazon
FEL-PRO VS50265C
🇺🇸 US
High Temperature DesignCork
View on
Amazon
MAHLE / CLEVITE VS38110
🇺🇸 US
Cork-RubberMounting Hole Quantity: 12
View on
Amazon
MAHLE / CLEVITE VS38110R
🇺🇸 US
SetMolded Rubber
Fitment notes — MAHLE / CLEVITE VS38110R
SetMolded RubberMounting Hole Quantity: 12
View on
Amazon
MAHLE / CLEVITE VS38110TC
🇺🇸 US
Cork with Metal CarrierMounting Hole Quantity: 8
View on
Amazon
VICTOR REINZ 151058701
🇺🇸 US
SetCork
Fitment notes — VICTOR REINZ 151058701
SetCork
7/32 IN Thick
View on
Amazon
VICTOR REINZ 151050201
🇺🇸 US
SetHigh Temperature Design
Fitment notes — VICTOR REINZ 151050201
SetHigh Temperature DesignCork
View on
Amazon
VICTOR REINZ 151050101
🇺🇸 US
SetCork
Fitment notes — VICTOR REINZ 151050101
SetCork
5/32 IN Thick
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Cover Load Spreader

Brand Part Number Markets Notes Buy
FEL-PRO ES72676
🇺🇸 US
View on
Amazon
VICTOR REINZ 181003401
🇺🇸 US
View on
Amazon

This table covers the Valve Cover Load spreaders.

Valve Stem Seal

Brand Part Number Markets Notes Buy
FEL-PRO Popular SS5112
🇺🇸 US
Set
Fitment notes — FEL-PRO SS5112
Set
Intake and ExhaustO-Ring Type
View on
Amazon
FEL-PRO Popular SS10058
🇺🇸 US
Set
Fitment notes — FEL-PRO SS10058
Set
Intake and ExhaustOptional Umbrella Seal For Use with O-Ring Seal
View on
Amazon
MAHLE / CLEVITE SS45229
🇺🇸 US
SetMolded Rubber
Fitment notes — MAHLE / CLEVITE SS45229
SetMolded Rubber
Intake and ExhaustO-Ring Type
View on
Amazon
MAHLE / CLEVITE SS45418
🇺🇸 US
FluoroelastomerValve Stem Seal Outside Diameter
Fitment notes — MAHLE / CLEVITE SS45418
FluoroelastomerValve Stem Seal Outside DiameterB (In): 0.562
IntakePositive type
View on
Amazon
MAHLE / CLEVITE SS45264
🇺🇸 US
SetMolded Rubber
Fitment notes — MAHLE / CLEVITE SS45264
SetMolded Rubber
Intake and ExhaustOE Design, Shedder TypeUse with .341 IN Valve Stem Diameter
View on
Amazon
VICTOR REINZ 121001801
🇺🇸 US
SetContains 8 Pieces
Fitment notes — VICTOR REINZ 121001801
SetContains 8 Pieces
Intake and ExhaustO-Ring Type
View on
Amazon
VICTOR REINZ 121004001
🇺🇸 US
SetContains 16 Pieces
Fitment notes — VICTOR REINZ 121004001
SetContains 16 Pieces
Intake and ExhaustOptional Umbrella Seal For Use with O-Ring Seal
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 1969 Bizzarrini GT Strada 5300

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Confirm you have the 5.4L V8 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Valve Cover Gasket and Cylinder Head Gasket .

Frequently Asked Questions

How many engine parts fit the 1969 Bizzarrini GT Strada 5300?

Our catalog currently lists 93 engine parts for the 1969 Bizzarrini GT Strada 5300 across 20 subcategories and 5 brands, covering the 5.4L V8 engine. Each part is matched to the engine(s) it fits.

What are the signs of engine problems on a 1969 Bizzarrini GT Strada 5300?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1969 Bizzarrini GT Strada 5300 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1969 Bizzarrini GT Strada 5300?

Every part on this page is matched to the 5.4L V8 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1969 Bizzarrini GT Strada 5300

Engine Parts for Other Bizzarrini GT Strada 5300 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.