2018 BMW 318I Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts are listed for the 2018 BMW 318I, from AJUSA and ELRING.

This group includes AJUSA 54263400 and ELRING 702530.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: AJUSA 15107900.

This table covers the bolts that clamp the cylinder head to the block. Read more

One part is listed for the 2018 BMW 318I — AJUSA 81064700.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies both parts for the 2018 BMW 318I.

This group includes AJUSA 10220800 and AJUSA 10220810.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2018 BMW 318I — AJUSA 52438500.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2018 BMW 318I — AJUSA 50452800.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2018 BMW 318I — AJUSA 24039500.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

This group shows a single part: MARELLI RO0044.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies both parts for the 2018 BMW 318I.

Listed part numbers: AJUSA 77005900 and AJUSA 77006000.

This table covers the drain plugs in the oil pan. Read more

2 Oil Drain Plug parts for the 2018 BMW 318I come from 2 brands — AGS and DORMAN.

Part numbers include AGS ODP00010 and DORMAN 090088.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2018 BMW 318I — AJUSA 21010400.

This table covers the caps on the oil filler neck. Read more

This group shows a single part: MOTORAD MO156.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

7 Oil Filter parts for the 2018 BMW 318I come from 6 brands — WIX, PRO-TEC, FVP and 3 other brands. The "Popular" part is PRO-TEC PXL10358.

The Economy section lists 2 options from PRO-TEC and FVP — the catalog's value-priced group. PRO-TEC PXL10358 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1C354A is listed in this group.

In the Standard Replacement grade, MANN, VARIOUS MFR and WIX supply 3 parts: built to original-equipment specification. A representative part number is MANN HU60141Z.

Listed part numbers: PRO-TEC PXL10358, FVP G0358 and MOBIL M1C354A, plus the other parts above.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Turbocharger Gasket parts are listed for the 2018 BMW 318I, from ELRING and AJUSA.

This group includes AJUSA JTC11989, ELRING 087320 and ELRING 074140.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

This group shows a single part: AJUSA OP10929.

This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: AJUSA 16006101.

This table covers the Valve covers. Read more

One part is listed for the 2018 BMW 318I — DORMAN 264758.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 11140200.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

This group shows a single part: AJUSA 85022300.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Valve Stem Seal parts for the 2018 BMW 318I come from 2 brands — AJUSA and ELRING.

This group includes AJUSA 12027900, AJUSA 12028200 and AJUSA 57073800 and the remaining parts above.