2019 BMW X6 Drivetrain Parts

This table covers the Axle / Differential assemblies. Read more

This group shows a single part: VAICO V204613.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Axle Shaft Seal parts are listed for the 2019 BMW X6, from TIMKEN and AJUSA. AJUSA 12021750 carries the "Popular" badge. 3 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: AJUSA 12021750, TIMKEN SL260472 and TIMKEN SL260162, plus the other parts above.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

35 CV Axle parts are listed for the 2019 BMW X6, from GSP, TOP NOTCH, TRAKMOTIVE and 2 other brands. TOP NOTCH TN10098PR carries the "Popular" badge. Premium and Standard Replacement are all represented, and Standard Replacement alone accounts for 29 parts.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

8 CV Joint Boot parts are listed for the 2019 BMW X6, from BECK/ARNLEY, GKN and REIN. REIN BKN0135 carries the "Popular" badge. 4 parts fit every engine; the other 4 are engine-specific.

This group includes REIN BKN0135, REIN BKN0184 and BECK/ARNLEY 1032892 and the remaining parts above.

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2019 BMW X6 — AJUSA 16031150.

This table covers the Differential Fill drain plugs. Read more

REIN supplies both parts for the 2019 BMW X6. All of them fit every engine offered in the 2019 X6.

Listed part numbers: REIN HWP0065 and REIN HWU0065.

This table covers the flanges that connect the driveshaft to the differential pinion. Read more

One part is listed for the 2019 BMW X6 — VNE 4009141.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Differential Pinion Seal parts are listed for the 2019 BMW X6, from AJUSA and TIMKEN. 3 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: AJUSA 12005350, AJUSA 12015650 and TIMKEN SL260487, plus the other parts above.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Differential Seal parts for the 2019 BMW X6 come from ELRING. 3 parts fit every engine; the other 1 is engine-specific.

Part numbers include ELRING 729370, ELRING 761160 and ELRING B16790, among others listed above.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

10 Drive Shaft parts for the 2019 BMW X6 come from 5 brands — TOP NOTCH, GSP, VAICO and 2 other brands. The "Popular" part is DORMAN 986384. 4 parts fit every engine; the other 6 are engine-specific.

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Drive Shaft Center Support Bearing parts for the 2019 BMW X6 come from 2 brands — REIN and ÜRO PARTS. Every part fits both the 3.0L L6 Turbocharged and the 4.4L V8 Turbocharged.

This group includes REIN BEM0039P and ÜRO PARTS 26127558745.

This table covers the Drive Shaft Center Support bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: VAICO V201048.

This table covers the flex joints in the driveshaft. Read more

6 Drive Shaft Flex Joint parts are listed for the 2019 BMW X6, from AAE, MOOG, ÜRO PARTS and 1 other brand. ÜRO PARTS 26111229360 carries the "Popular" badge. 4 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: ÜRO PARTS 26111229360, AAE FJC0107 and AAE FJC0118, plus the other parts above.

This table covers the seals at the Drive Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2019 BMW X6 — ELRING B15590.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

VALVOLINE supplies the 6 Gear Oil parts for the 2019 BMW X6. VALVOLINE VV975 carries the "Popular" badge. All of them fit every engine offered in the 2019 X6.

Listed part numbers: VALVOLINE VV975, VALVOLINE 889785 and VALVOLINE 882505, plus the other parts above.

This table covers the Transfer Case assemblies. Read more

One part is listed for the 2019 BMW X6 — VAICO V204503.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

3 Transfer Case Fluid parts are listed for the 2019 BMW X6, from REIN and VAICO. 2 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: REIN FLDF005, REIN FLDF002 and VAICO V600431.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Transfer Case Input Shaft Bearing parts are listed for the 2019 BMW X6, from NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2019 X6.

This group includes NATIONAL 210L and WJB / INMOTION PARTS RB6210NR.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Input Shaft Seal parts for the 2019 BMW X6 come from 2 brands — NATIONAL and WJB / INMOTION PARTS. Every part fits both the 3.0L L6 Turbocharged and the 4.4L V8 Turbocharged.

This group includes NATIONAL 710743 and WJB / INMOTION PARTS WS710743.

This table covers the Transfer Case motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

2 Transfer Case Motor parts for the 2019 BMW X6 come from 2 brands — REIN and STANDARD MOTOR PRODUCTS. Every part fits both the 3.0L L6 Turbocharged and the 4.4L V8 Turbocharged.

Listed part numbers: REIN TDA0013 and STANDARD MOTOR PRODUCTS TCM162.

This table covers the Transfer Case Oil drain plugs. Read more

REIN supplies both parts for the 2019 BMW X6. All of them fit every engine offered in the 2019 X6.

Listed part numbers: REIN HWP0065 and REIN HWU0065.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Transfer Case Output Shaft Bearing parts for the 2019 BMW X6 come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL. Every part fits both the 3.0L L6 Turbocharged and the 4.4L V8 Turbocharged.

The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS RB6009 is listed in this group.

In the Standard Replacement grade, BCA and NATIONAL supply 2 parts: built to original-equipment specification. A representative part number is BCA NB109.

Part numbers include WJB / INMOTION PARTS RB6009, BCA NB109 and NATIONAL 109.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

5 Transfer Case Output Shaft Repair Sleeve parts are listed for the 2019 BMW X6, from WJB / INMOTION PARTS, NATIONAL and BCA. WJB / INMOTION PARTS WS99166 carries the "Popular" badge. All of them fit every engine offered in the 2019 X6.

Listed part numbers: WJB / INMOTION PARTS WS99166, BCA NS99166 and NATIONAL 99166, plus the other parts above.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Transfer Case Output Shaft Seal parts are listed for the 2019 BMW X6, from WJB / INMOTION PARTS, NATIONAL, BCA and 1 other brand. NATIONAL 224250 carries the "Popular" badge. All of them fit every engine offered in the 2019 X6.

This group includes NATIONAL 224250, BCA NS224250 and ÜRO PARTS 27107546667 and the remaining parts above.

This table covers the Transfer Case Overhaul kits. Read more

REIN supplies the 3 Transfer Case Overhaul Kit parts for the 2019 BMW X6. 2 parts fit every engine; the other 1 is engine-specific.

Part numbers include REIN RVK0006, REIN RVK0004 and REIN RVK0005.