8 Wheel parts are listed for the 2020 BMW 320I, in 5 part types, covering the 2.0L L4 Turbocharged engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
The wheel hardware on the 2020 BMW 320I covers lug nuts, studs, hub caps, TPMS sensors and trim rings. The largest groups are Tire Pressure Monitoring System (TPMS) Stem / Service Kit (4 parts), Lug Nut & Lock Kit (1 part) and Lug Nut Lock (1 part). The other 2 part types cover the remaining 2 parts.
Every part on this page is matched to the 2.0L L4 Turbocharged — the only engine offered in the 2020 BMW 320I.
The most listed brands for 2020 BMW 320I wheel parts are SCHRADER (5 parts), MCGARD (2 parts) and DORMAN (1 part). Quality grades include Hardware Only and Valve Stem Assembly.
Each part number listed for the 2020 BMW 320I opens a page with every vehicle that part fits.
Lug Nut & Lock Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MCGARD | 67226 | 🇲🇽 MX | M14X1.25 Lug Bolt Wheel Installation Kit, 54.2mm OAL(16 Lug Bolts / 4 Wheel Locks / 1 Key / 1 Key Pouch) | View on Amazon |
This table covers the Lug Nut & Lock kits.
One part is listed for the 2020 BMW 320I — MCGARD 67226.
Lug Nut Lock
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MCGARD | 27226 | 🇲🇽 MX | Cone Seat Style Wheel Lock Bolts(4 Locks / 1 Key) | View on Amazon |
This table covers the locking lug nuts and keys.
One part is listed for the 2020 BMW 320I — MCGARD 27226.
Lug Stud
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 610532 | 🇲🇽 MX | Fits Rear | View on Amazon |
This table covers the Lug studs.
One part is listed for the 2020 BMW 320I — DORMAN 610532.
Tire Pressure Monitoring System (TPMS) Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHRADER | 29114 | 🇲🇽 MX | ProgrammedIncludes Mounting Hardware | View on Amazon |
This table covers the TPMS sensors mounted in each wheel. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
This group shows a single part: SCHRADER 29114.
Tire Pressure Monitoring System (TPMS) Stem / Service Kit
Hardware Only
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHRADER | 20050 | 🇲🇽 MX | Clamp-In componentsPack of 50 | View on Amazon |
Valve Stem Assembly
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHRADER | 20050V | 🇲🇽 MX | Clamp-In componentsPack of 50 | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHRADER | 20050V10 | 🇲🇽 MX | Clamp-In componentsPack of 10 | View on Amazon |
| SCHRADER | 20050V25P | 🇲🇽 MX | Clamp-In componentsPack of 25 | View on Amazon |
This table covers TPMS valve stems and the service kits used when a tire is changed.
SCHRADER supplies the 4 Tire Pressure Monitoring System (TPMS) Stem / Service Kit parts for the 2020 BMW 320I.
In the Hardware Only grade, SCHRADER supplies 1 part: grouped under the catalog's "Hardware Only" designation — the notes column spells out what sets them apart. A representative part number is SCHRADER 20050.
The Valve Stem Assembly section lists 1 option from SCHRADER — grouped under the catalog's "Valve Stem Assembly" designation — the notes column spells out what sets them apart. SCHRADER 20050V is listed in this group.
2 ungrouped parts are not assigned to a grade, with the same engine-level match.
Listed part numbers: SCHRADER 20050, SCHRADER 20050V and SCHRADER 20050V10, plus the other parts above.
Buying Wheel Parts for a 2020 BMW 320I
On this vehicle, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings.
- Confirm you have the 2.0L L4 Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Tire Pressure Monitoring System (TPMS) Stem / Service Kit and Lug Nut & Lock Kit .
Frequently Asked Questions
How many wheel parts fit the 2020 BMW 320I?
Our catalog currently lists 8 wheel parts for the 2020 BMW 320I across 5 subcategories and 3 brands, covering the 2.0L L4 Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of wheel problems on a 2020 BMW 320I?
Common symptoms include a TPMS light that will not clear, vibration after a wheel was serviced, or studs damaged by past over-torquing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2020 BMW 320I was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2020 BMW 320I?
Every part on this page is matched to the 2.0L L4 Turbocharged engine. Then always torque lug nuts to spec in a star pattern — impact guns without torque sticks warp rotors and stretch studs. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2020 BMW 320I
Wheel Parts for Other BMW 320I Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.