2021 BMW 118I Suspension Parts

Engine:
1.5L L3 Turbocharged

12 Suspension parts are listed for the 2021 BMW 118I, in 4 part types, covering the 1.5L L3 Turbocharged engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 2021 BMW 118I, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links. Most of the listed parts are Control Arm (4 parts), Ride Height Sensor (3 parts) and Sway Bar Link (3 parts). The other 1 part type covers the remaining 2 parts.

Control Arm

Brand Part Number Markets Notes Buy
DORMAN 528197
🇲🇽 MX
Rear LowerLateral Arm
View on
Amazon
DORMAN 527082
🇲🇽 MX
Rear UpperLateral Arm
View on
Amazon
DORMAN 527135
🇲🇽 MX
Complete Arm with Ball Joint
Fitment notes — DORMAN 527135
Complete Arm with Ball Joint
Front Left LowerHatchback
View on
Amazon
DORMAN 527136
🇲🇽 MX
Complete Arm with Ball Joint
Fitment notes — DORMAN 527136
Complete Arm with Ball Joint
Front Right LowerHatchback
View on
Amazon

This table covers the control arms that locate each hub relative to the chassis. Typical signs include clunks over bumps, a wander on the highway, or inner-edge tire wear. Get an alignment after any control-arm work, and inspect the ball joint and bushings that came with the arm.

Ride Height Sensor

Brand Part Number Markets Notes Buy
ARNOTT RH4387
🇲🇽 MX
Fits FrontSedan
Fitment notes — ARNOTT RH4387
Fits:
FrontSedan
or:
RearSedan
View on
Amazon
ARNOTT RH3718
🇲🇽 MX
Fits FrontHatchback
Fitment notes — ARNOTT RH3718
Fits:
FrontHatchback
or:
RearHatchback
View on
Amazon
MONROE HS10203
🇲🇽 MX
Fits FrontHatchback
Fitment notes — MONROE HS10203
Fits:
FrontHatchbackwith Air Suspension
or:
RearHatchbackwith Air Suspension
View on
Amazon

This table covers the Ride Height sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.

Shock / Strut

Brand Part Number Markets Notes Buy
FCS 346478
🇲🇽 MX
Rear
View on
Amazon
TOP NOTCH SS0729
🇲🇽 MX
Suspension Shocks
Fitment notes — TOP NOTCH SS0729
Suspension Shocks
Rear
View on
Amazon

This table covers the shocks and struts that damp wheel motion. Typical signs include a nose that keeps bouncing, cupped tires, or fluid weeping down the body. Replace shocks or struts in axle pairs and renew the mounts if they are torn or collapsed.

Buying Suspension Parts for a 2021 BMW 118I

On this vehicle, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links.

  • Confirm you have the 1.5L L3 Turbocharged engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Control Arm and Ride Height Sensor .

Frequently Asked Questions

How many suspension parts fit the 2021 BMW 118I?

Our catalog currently lists 12 suspension parts for the 2021 BMW 118I across 4 subcategories and 6 brands, covering the 1.5L L3 Turbocharged engine. Each part is matched to the engine(s) it fits.

What are the signs of suspension problems on a 2021 BMW 118I?

Common symptoms include clunks over speed bumps, wandering steering, cupped tire wear, or a nose that keeps bouncing after a dip. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2021 BMW 118I was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2021 BMW 118I?

Every part on this page is matched to the 1.5L L3 Turbocharged engine. Then worn bushings often mimic bad shocks — inspect before buying, and remember loaded vs unloaded strut assemblies differ in labor by hours. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2021 BMW 118I

Suspension Parts for Other BMW 118I Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.