The 2022 BMW M240I has 17 drivetrain parts with verified fitment on this page — 8 part types and 9 brands, covering the 3.0L L6 Turbocharged engine. Each part includes a manufacturer part number and application notes.
On the 2022 BMW M240I, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. 10 parts of the 17 listed are CV Axle (5 parts), Differential Pinion Seal (3 parts) and Axle Shaft Seal (2 parts). The other 5 part types cover the remaining 7 parts.
The 2022 BMW M240I came with a single engine, the 3.0L L6 Turbocharged, and every part is verified against it.
9 brands supply drivetrain parts for the 2022 BMW M240I, led by TIMKEN (4 parts), TOP NOTCH (2 parts) and GSP (2 parts), plus 6 more brands.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2022 BMW M240I. 1 part has it: TOP NOTCH TN10075 (CV Axle). Each part number opens a page with every vehicle that part fits.
Axle Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TIMKEN | SL260162 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| TIMKEN | SL260496 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
TIMKEN supplies both parts for the 2022 BMW M240I.
This group includes TIMKEN SL260162 and TIMKEN SL260496.
CV Axle
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TOP NOTCH Popular | TN10075 | 🇺🇸 US 🇨🇦 CA | Front Left | View on Amazon |
| GSP | NCV27108 | 🇺🇸 US 🇨🇦 CA | Front Left | View on Amazon |
| GSP | NCV27109 | 🇺🇸 US 🇨🇦 CA | Front Right | View on Amazon |
| TOP NOTCH | TN10076 | 🇺🇸 US 🇨🇦 CA | Front Right | View on Amazon |
| TRAKMOTIVE | BM86037 | 🇺🇸 US 🇨🇦 CA | AAR Joint Design | View on Amazon |
This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes.
5 CV Axle parts are listed for the 2022 BMW M240I, from TOP NOTCH, GSP and TRAKMOTIVE. TOP NOTCH TN10075 carries the "Popular" badge.
Part numbers include TOP NOTCH TN10075, GSP NCV27108 and GSP NCV27109, among others listed above.
Differential Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 16031150 | 🇺🇸 US 🇨🇦 CA | FrontCover O-Ring | View on Amazon |
This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2022 BMW M240I — AJUSA 16031150.
Differential Fill / Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN | HWP0065 | 🇺🇸 US 🇨🇦 CA | Fits Rear DifferentialM22X1.5, Steel | View on Amazon |
| REIN | HWU0065 | 🇺🇸 US 🇨🇦 CA | Fits Rear DifferentialM22X1.5, Aluminum | View on Amazon |
This table covers the Differential Fill drain plugs.
REIN supplies both parts for the 2022 BMW M240I.
Part numbers include REIN HWP0065 and REIN HWU0065.
Differential Pinion Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 12015650 | 🇺🇸 US 🇨🇦 CA | Front44x69x10/15mm | View on Amazon |
| TIMKEN | SL260487 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| TIMKEN | SL260527 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Differential Pinion Seal parts are listed for the 2022 BMW M240I, from TIMKEN and AJUSA.
Listed part numbers: AJUSA 12015650, TIMKEN SL260487 and TIMKEN SL260527.
Differential Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING | B16790 | 🇺🇸 US 🇨🇦 CA | Material: AEM (Ethylene Acrylate Rubber)Swirl Type: Alternating Twist | View on Amazon |
This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: ELRING B16790.
Drive Shaft Flex Joint
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AAE | FJC0107 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
This table covers the flex joints in the driveshaft.
One part is listed for the 2022 BMW M240I — AAE FJC0107.
Gear Oil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE | 915052 | 🇺🇸 US 🇨🇦 CA | Advanced Full Synthetic SAE 75W-85 Gear Oil1 Gallon | View on Amazon |
| VALVOLINE | 915053 | 🇺🇸 US 🇨🇦 CA | Advanced Full Synthetic SAE 75W-85 Gear Oil1 Quart Flex Fill | View on Amazon |
This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle.
VALVOLINE supplies both parts for the 2022 BMW M240I.
This group includes VALVOLINE 915052 and VALVOLINE 915053.
Buying Drivetrain Parts for a 2022 BMW M240I
On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.
- Confirm you have the 3.0L L6 Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: CV Axle and Differential Pinion Seal .
Frequently Asked Questions
How many drivetrain parts fit the 2022 BMW M240I?
Our catalog currently lists 17 drivetrain parts for the 2022 BMW M240I across 8 subcategories and 9 brands, covering the 3.0L L6 Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of drivetrain problems on a 2022 BMW M240I?
Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2022 BMW M240I was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2022 BMW M240I?
Every part on this page is matched to the 3.0L L6 Turbocharged engine. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2022 BMW M240I
Drivetrain Parts for Other BMW M240I Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.