2022 BMW X3 Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

The 2022 BMW X3 has 244 engine parts with verified fitment on this page — 54 part types and 41 brands, covering both the 2.0L L4 Turbocharged and the 3.0L L6 Turbocharged. Each part includes a manufacturer part number and application notes.

On the 2022 BMW X3, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 54 parts of the 244 listed are Oil Filter (26 parts), Cylinder Head Gasket (14 parts) and Valve Stem Seal (14 parts). The other 51 part types cover the remaining 190 parts.

Balance Shaft Cover

Brand Part Number Markets Notes Buy
DORMAN Fits: 2.0L L4 Turbocharged 926054
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
sDrive30i or xDrive30i
View on
Amazon

This table covers the Balance Shaft covers.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 Turbocharged 54263900
🇲🇽 MX
sDrive20iEngine # B48B20A
View on
Amazon
AJUSA Fits: 2.0L L4 Turbocharged 54303200
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
sDrive30i or xDrive30i or xDrive30i Outdoor Edition or xDrive30i ProtectionEngine # B46B20B
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged 54302500
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M40i Model
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged 54320500
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M Competition or M Model
View on
Amazon
ELRING Fits: 2.0L L4 Turbocharged 076380
🇲🇽 MX
with Crankshaft Sealfor OE Number: 11428580414
Fitment notes — ELRING 076380
with Crankshaft Sealfor OE Number: 11428580414
SDRIVE20IBody code: G01
View on
Amazon
ELRING Fits: 3.0L L6 Turbocharged 794700
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with Crankshaft Seal
Fitment notes — ELRING 794700
with Crankshaft Seal
M CompetitionBody code: F97
View on
Amazon
ELRING Fits: 3.0L L6 Turbocharged 113340
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with Crankshaft Seal, Oil Sump Gasket
Fitment notes — ELRING 113340
with Crankshaft Seal, Oil Sump Gasket
M CompetitionBody code: F97
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Main Bearing

Brand Part Number Markets Notes Buy
KING ENGINE BEARINGS Fits: 3.0L L6 Turbocharged MB7779SM
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SetBimetal (Strengthened Aluminum)
Fitment notes — KING ENGINE BEARINGS MB7779SM
SetBimetal (Strengthened Aluminum)
M40i Model
View on
Amazon

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Crankshaft Seal

Brand Part Number Markets Notes Buy
ELRING Popular Fits: all 2022 X3 engines 575970
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Height [MM]: 8Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
Fitment notes — ELRING 575970
Height [MM]: 8Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)Radial Shaft Seal Design: ASW
SDRIVE20IBody code: G01
M CompetitionBody code: F97
View on
Amazon
ELRING Popular Fits: all 2022 X3 engines 586550
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with Mounting SleeveMaterial: PTFE (polytetrafluoroethylene)
Fitment notes — ELRING 586550
with Mounting SleeveMaterial: PTFE (polytetrafluoroethylene)
M CompetitionBody code: F97
SDRIVE20IBody code: G01
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged 15075200
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontClockwise
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged 15107900
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearCounter Clockwise
View on
Amazon
MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged 68102
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
PTFE (Polytetrafluoroethylene)
Fitment notes — MAHLE / CLEVITE 68102
PTFE (Polytetrafluoroethylene)
Rear
View on
Amazon
VICTOR REINZ Fits: all 2022 X3 engines 813700200
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontEngine Code B46B20O0
Fitment notes — VICTOR REINZ 813700200
FrontEngine Code B46B20O0
FrontEngine Code B58B30O1 or Engine Code S58B30T0
View on
Amazon
VICTOR REINZ Fits: all 2022 X3 engines 811044800
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearEngine Code B46B20O0
Fitment notes — VICTOR REINZ 811044800
RearEngine Code B46B20O0
RearEngine Code B58B30O1 or Engine Code S58B30T0Replaces OE Part Number(s) 11148602594
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Crankshaft Seal Gasket

Brand Part Number Markets Notes Buy
ELRING Fits: 2.0L L4 Turbocharged B45970
🇲🇽 MX
SDRIVE20IBody code: G01
View on
Amazon

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
ELRING Popular Fits: 3.0L L6 Turbocharged 794480
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SetBolt Head-/Nut Design: Female Torx
Fitment notes — ELRING 794480
SetBolt Head-/Nut Design: Female TorxNumber of Bolts/Screws: 14Thread Size: M11X1,5x188
M CompetitionBody code: F97
View on
Amazon
AJUSA Fits: 2.0L L4 Turbocharged 81065000
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
sDrive30i or xDrive30i or xDrive30i Outdoor Edition or xDrive30i ProtectionEngine # B46B20B
View on
Amazon
AJUSA Fits: 2.0L L4 Turbocharged 81077900
🇲🇽 MX
sDrive20iEngine # B48B20A
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged 81069200
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M40i Model
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged 81082000
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M Competition or M Model
View on
Amazon
ELRING Fits: 2.0L L4 Turbocharged 794470
🇲🇽 MX
SetBolt Head-/Nut Design: Female Torx
Fitment notes — ELRING 794470
SetBolt Head-/Nut Design: Female TorxThread Size: M11X1,5x188
SDRIVE20IBody code: G01
View on
Amazon
VICTOR REINZ Fits: 2.0L L4 Turbocharged 141226102
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
Fitment notes — VICTOR REINZ 141226102
Set
Engine Code B46B20O0B46B20O0 Engine
View on
Amazon
VICTOR REINZ Fits: 3.0L L6 Turbocharged 141226103
🇺🇸 US 🇨🇦 CA
Set
Fitment notes — VICTOR REINZ 141226103
Set
MILD HYBRID EV-GAS (MHEV)
View on
Amazon
VICTOR REINZ Fits: 3.0L L6 Turbocharged 141308203
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
Fitment notes — VICTOR REINZ 141308203
Set
M Competition or M Model
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
ELRING Popular Fits: 2.0L L4 Turbocharged 796280
🇲🇽 MX
Diameter [MM]: 83,3Installed Thickness [MM]: 0,7
Fitment notes — ELRING 796280
Diameter [MM]: 83,3Installed Thickness [MM]: 0,7Thickness: 0.7 MM
SDRIVE20IBody code: G01
View on
Amazon
ELRING Popular Fits: 2.0L L4 Turbocharged 597170
🇲🇽 MX
Diameter [MM]: 83,3Installed Thickness [MM]: 1,0
Fitment notes — ELRING 597170
Diameter [MM]: 83,3Installed Thickness [MM]: 1,0
SDRIVE20IBody code: G01
View on
Amazon
ELRING Popular Fits: 3.0L L6 Turbocharged 793491
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Installed Thickness [MM]: 0,81Material: Multi-Layer Steel (MLS)
Fitment notes — ELRING 793491
Installed Thickness [MM]: 0,81Material: Multi-Layer Steel (MLS)
Fits:
MILD HYBRID EV-GAS (MHEV)
or:
M CompetitionBody code: F97
View on
Amazon
ELRING Popular Fits: 3.0L L6 Turbocharged 511091
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Installed Thickness [MM]: 0,95Material: Metalofl
Fitment notes — ELRING 511091
Installed Thickness [MM]: 0,95Material: Metalofl
M Competition or M Model
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged 10248900
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10248900
Multi Layered Steel
M40i Model83 Bore Diameter
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged 10248910
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10248910
Multi Layered Steel
M40i Model83 Bore Diameter(+0.30) Thickness
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged 10260600
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10260600
Multi Layered Steel
M Competition or M Model84.5 Bore Diameter
View on
Amazon
ELRING Fits: 3.0L L6 Turbocharged 739501
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Installed Thickness [MM]: 1,11Material: Multi-Layer Steel (MLS)
Fitment notes — ELRING 739501
Installed Thickness [MM]: 1,11Material: Multi-Layer Steel (MLS)
Fits:
MILD HYBRID EV-GAS (MHEV)
or:
M CompetitionBody code: F97
View on
Amazon
MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged 55535
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Multi-Layered Steel
Fitment notes — MAHLE / CLEVITE 55535
Multi-Layered Steel
0.80MM THICKNESS
View on
Amazon
MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged 55536
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Multi-Layered Steel
Fitment notes — MAHLE / CLEVITE 55536
Multi-Layered Steel
1.10mm Thickness
View on
Amazon
VICTOR REINZ Fits: 2.0L L4 Turbocharged 611016610
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Engine Code B46B20O0B46B20O0 Engine
Fitment notes — VICTOR REINZ 611016610
Engine Code B46B20O0B46B20O0 Engine1.10mm Thick
View on
Amazon
VICTOR REINZ Fits: 2.0L L4 Turbocharged 611016600
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Engine Code B46B20O0B46B20O0 Engine
Fitment notes — VICTOR REINZ 611016600
Engine Code B46B20O0B46B20O0 Engine0.80mm Thick
View on
Amazon
VICTOR REINZ Fits: 3.0L L6 Turbocharged 611084400
🇺🇸 US 🇨🇦 CA
Mild Hybrid EV-Gas (MHEV)0.80mm Thick
View on
Amazon
VICTOR REINZ Fits: 3.0L L6 Turbocharged 611084410
🇺🇸 US 🇨🇦 CA
Mild Hybrid EV-Gas (MHEV)1.10mm Thick
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 Turbocharged 52561600
🇲🇽 MX
sDrive20iEngine # B48B20A
View on
Amazon
AJUSA Fits: 2.0L L4 Turbocharged 52680100
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
sDrive30i or xDrive30i or xDrive30i Outdoor Edition or xDrive30i ProtectionEngine # B46B20B
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged 52601200
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M Competition or M Model
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged 52635900
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M40i Model
View on
Amazon
ELRING Fits: 2.0L L4 Turbocharged 444970
🇲🇽 MX
without Cylinder Head Gasket
Fitment notes — ELRING 444970
without Cylinder Head Gasket
SDRIVE20IBody code: G01
View on
Amazon
ELRING Fits: 2.0L L4 Turbocharged 076430
🇲🇽 MX
without Valve Cover Gasket
Fitment notes — ELRING 076430
without Valve Cover Gasket
SDRIVE20IBody code: G01
View on
Amazon
ELRING Fits: 3.0L L6 Turbocharged 113980
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes Valve Stem Seals
Fitment notes — ELRING 113980
Includes Valve Stem Seals
M CompetitionBody code: F97
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Engine Cover

Brand Part Number Markets Notes Buy
TECHPRO Fits: all 2022 X3 engines BM1228185
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontLower
Fitment notes — TECHPRO BM1228185
FrontLowerG01
View on
Amazon
TECHPRO Fits: all 2022 X3 engines BM1228196
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Center LowerG01
View on
Amazon
VARIOUS MFR Fits: all 2022 X3 engines BM1228196
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
CAPA Certified
Fitment notes — VARIOUS MFR BM1228196
CAPA Certified
Center LowerG01 [CAPA Certified]
View on
Amazon

This table covers the Engine covers.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 Turbocharged 50515100
🇲🇽 MX
sDrive20iEngine # B48B20A
View on
Amazon
AJUSA Fits: 2.0L L4 Turbocharged 50601200
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
sDrive30i or xDrive30i or xDrive30i Outdoor Edition or xDrive30i ProtectionEngine # B46B20B
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged 50546600
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M Competition or M Model
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged 50565600
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M40i Model
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Harmonic Balancer Bolt

Brand Part Number Markets Notes Buy
REIN Fits: all 2022 X3 engines HWB0074
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
10 x 65mm
View on
Amazon

This table covers the Harmonic Balancer bolts.

Intake Manifold

Brand Part Number Markets Notes Buy
VAICO Fits: 2.0L L4 Turbocharged V204803
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Description: behind exhaust turbocharger
Fitment notes — VAICO V204803
Description: behind exhaust turbocharger
xDrive30i
View on
Amazon

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Popular Fits: 3.0L L6 Turbocharged MS20465
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SetMolded Rubber
Fitment notes — MAHLE / CLEVITE MS20465
SetMolded Rubber
M Competition or M Model
View on
Amazon
VICTOR REINZ Popular Fits: 3.0L L6 Turbocharged 711243900
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M Competition or M Model
View on
Amazon
AJUSA Fits: all 2022 X3 engines 13313000
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
sDrive30i or xDrive30i or xDrive30i Outdoor Edition or xDrive30i ProtectionEngine # B46B20B
Fitment notes — AJUSA 13313000
sDrive30i or xDrive30i or xDrive30i Outdoor Edition or xDrive30i ProtectionEngine # B46B20B
M40i Model
View on
Amazon
ELRING Fits: all 2022 X3 engines 076500
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits or SDRIVE20IBody code: G01
Fitment notes — ELRING 076500
Fits:
or SDRIVE20IBody code: G01
M CompetitionBody code: F97
View on
Amazon
MAHLE / CLEVITE Fits: all 2022 X3 engines MS20642
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SetMolded Rubber
Fitment notes — MAHLE / CLEVITE MS20642
SetMolded Rubber
Intake Manifold to Cylinder Head
MILD HYBRID EV-GAS (MHEV)Intake Manifold to Cylinder Head
View on
Amazon
VICTOR REINZ Fits: all 2022 X3 engines 711737500
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Engine Code B46B20O0B46B20O0 Engine
Fitment notes — VICTOR REINZ 711737500
Engine Code B46B20O0B46B20O0 Engine
MILD HYBRID EV-GAS (MHEV)
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Motor Mount

Economy

Brand Part Number Markets Notes Buy
ÜRO PARTS Popular Fits: 2.0L L4 Turbocharged 22116860495
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
LeftxDrive30i
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ANCHOR Popular Fits: 2.0L L4 Turbocharged 10067
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Front LeftRWD
Fitment notes — ANCHOR 10067
Fits:
Front LeftRWDHydraulic
or:
Front RightRWDHydraulic
or:
Front RightAWDExcept XDrive 30EX ModelsHydraulic
View on
Amazon
ANCHOR Fits: 2.0L L4 Turbocharged 10068
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front LeftAWD
Fitment notes — ANCHOR 10068
Front LeftAWDExcept XDrive 30EX ModelsHydraulic
View on
Amazon
ANCHOR Fits: 2.0L L4 Turbocharged 10308
🇺🇸 US 🇲🇽 MX
Front LeftRWD
View on
Amazon
PIONEER Fits: 2.0L L4 Turbocharged 610067
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Front RightsDrive30i or xDrive30i
Fitment notes — PIONEER 610067
Fits:
Front RightsDrive30i or xDrive30i
or:
Front LeftSDRIVE30I
View on
Amazon
PIONEER Fits: 2.0L L4 Turbocharged 610068
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front LeftxDrive30i
View on
Amazon
Brand Part Number Markets Notes Buy
ANCHOR Popular Fits: 3.0L L6 Turbocharged 10258
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Front RightHydraulic
Fitment notes — ANCHOR 10258
Fits:
Front RightHydraulic
or:
Front LeftM Competition or M ModelHydraulic
View on
Amazon
ANCHOR Popular Fits: 3.0L L6 Turbocharged 10260
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front LeftM40i Model
Fitment notes — ANCHOR 10260
Front LeftM40i ModelHYDRAULIC
View on
Amazon
DEA / MARMON RIDE CONTROL Fits: 3.0L L6 Turbocharged A70079
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
LeftM40i Model
View on
Amazon
DEA / MARMON RIDE CONTROL Fits: 3.0L L6 Turbocharged A70084
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RightM40i Model
View on
Amazon
DEA / MARMON RIDE CONTROL Fits: 3.0L L6 Turbocharged A70085
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
LeftM Competition or M Model
View on
Amazon
DEA / MARMON RIDE CONTROL Fits: 3.0L L6 Turbocharged A70086
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RightM Competition or M Model
View on
Amazon
PIONEER Fits: 3.0L L6 Turbocharged 610258
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Front LeftM Competition or M Model
Fitment notes — PIONEER 610258
Fits:
Front LeftM Competition or M Model
or:
Front RightM Competition or M Model
View on
Amazon

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.

Motor Mount Kit

Brand Part Number Markets Notes Buy
ANCHOR Fits: 2.0L L4 Turbocharged 300960
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
AWDExcept XDRIVE 30EX
View on
Amazon
ANCHOR Fits: 2.0L L4 Turbocharged 300853
🇺🇸 US 🇲🇽 MX
RWD
View on
Amazon

This table covers the Motor Mount kits.

Oil

Summary: Notes list SAE 0W-20, SAE 0W-30 and SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include LIQUI MOLY, VALVOLINE and PENTOSIN.

Brand Part Number Markets Notes Buy
LIQUI MOLY Popular Fits: all 2022 X3 engines 22044
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Top Tec 6600 0W-201 Liter
Fitment notes — LIQUI MOLY 22044
Top Tec 6600 0W-201 Liter
MILD HYBRID EV-GAS (MHEV)
View on
Amazon
LIQUI MOLY Popular Fits: all 2022 X3 engines 22046
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Top Tec 6600 0W-205 Liter
Fitment notes — LIQUI MOLY 22046
Top Tec 6600 0W-205 Liter
MILD HYBRID EV-GAS (MHEV)
View on
Amazon
VALVOLINE Popular Fits: 3.0L L6 Turbocharged 787301
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
European Vehicle Full Synthetic SAE 5W-301 Quart
Fitment notes — VALVOLINE 787301
European Vehicle Full Synthetic SAE 5W-301 Quart
M Competition or M Model
View on
Amazon
LIQUI MOLY Fits: all 2022 X3 engines 22048
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Top Tec 6600 0W-2020 Liter
Fitment notes — LIQUI MOLY 22048
Top Tec 6600 0W-2020 Liter
MILD HYBRID EV-GAS (MHEV)
View on
Amazon
LIQUI MOLY Fits: 3.0L L6 Turbocharged 22260
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Special Tec B FE 0W-301 Liter
Fitment notes — LIQUI MOLY 22260
Special Tec B FE 0W-301 Liter
M Competition or M Model
View on
Amazon
LIQUI MOLY Fits: 3.0L L6 Turbocharged 22261
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Special Tec B FE 0W-305 Liter
Fitment notes — LIQUI MOLY 22261
Special Tec B FE 0W-305 Liter
M Competition or M Model
View on
Amazon
LIQUI MOLY Fits: 3.0L L6 Turbocharged 22269
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Special Tec B FE 0W-3020 Liter
Fitment notes — LIQUI MOLY 22269
Special Tec B FE 0W-3020 Liter
M Competition or M Model
View on
Amazon
MOBIL Fits: all 2022 X3 engines 127568
🇺🇸 US
ESP 5W30 1 Quart
Fitment notes — MOBIL 127568
ESP 5W30 1 Quart
M40i Model
View on
Amazon
PENTOSIN Fits: all 2022 X3 engines 8044317
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Pento Speed FESAE 0W-20
Fitment notes — PENTOSIN 8044317
Pento Speed FESAE 0W-201 Liter
MILD HYBRID EV-GAS (MHEV)
View on
Amazon
PENTOSIN Fits: all 2022 X3 engines 8044319
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Pento Speed FESAE 0W-20
Fitment notes — PENTOSIN 8044319
Pento Speed FESAE 0W-205 Liters
MILD HYBRID EV-GAS (MHEV)
View on
Amazon
VALVOLINE Fits: all 2022 X3 engines 888048
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
European Vehicle Full Synthetic SAE 0W-201 Quart
Fitment notes — VALVOLINE 888048
European Vehicle Full Synthetic SAE 0W-201 Quart
MILD HYBRID EV-GAS (MHEV)
View on
Amazon
VALVOLINE Fits: 3.0L L6 Turbocharged 893931
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
European Vehicle Full Synthetic SAE 0W-301 Quart
Fitment notes — VALVOLINE 893931
European Vehicle Full Synthetic SAE 0W-301 Quart
M Competition or M Model
View on
Amazon

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.

Oil Cooler

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged CLC362000S
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
sDrive30i or xDrive30iwith Oil Filter Housing
Fitment notes — MAHLE / CLEVITE CLC362000S
sDrive30i or xDrive30iwith Oil Filter Housingwith Filter
View on
Amazon
MARELLI Fits: all 2022 X3 engines RO0044
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
NISSENS Fits: 2.0L L4 Turbocharged 91395
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with Housing
View on
Amazon
NISSENS Fits: 3.0L L6 Turbocharged 91359
🇺🇸 US 🇨🇦 CA
Mild Hybrid EV-Gas (MHEV)without Housing
View on
Amazon
REIN Fits: 3.0L L6 Turbocharged ECK0273
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M40i Model
View on
Amazon

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant.

Oil Cooler Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 Turbocharged 77005900
🇲🇽 MX
UppersDrive20i
Fitment notes — AJUSA 77005900
UppersDrive20iEngine # B48B20A
View on
Amazon
AJUSA Fits: 2.0L L4 Turbocharged 77006000
🇲🇽 MX
LowersDrive20i
Fitment notes — AJUSA 77006000
LowersDrive20iEngine # B48B20A
View on
Amazon
AJUSA Fits: 2.0L L4 Turbocharged 77031200
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
sDrive30i or xDrive30i or xDrive30i Outdoor Edition or xDrive30i ProtectionEngine # B46B20B
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged 77010300
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
UpperM40i Model
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged 77010400
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
LowerM40i Model
View on
Amazon
ELRING Fits: 2.0L L4 Turbocharged 634970
🇲🇽 MX
SDRIVE20IBody code: G01
View on
Amazon
ELRING Fits: 3.0L L6 Turbocharged 784680
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M CompetitionBody code: F97
View on
Amazon

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Drain Plug

Brand Part Number Markets Notes Buy
DORMAN Fits: all 2022 X3 engines 090088
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
MetalStandard
Fitment notes — DORMAN 090088
MetalStandardThread SizeM12-1.50Under-Head Length: 16.95mmHead Size: 17mmHead Style: Hex
View on
Amazon
ELRING Fits: all 2022 X3 engines 455740
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with Seal RingBolt Head-/Nut Design: Male Hex
Fitment notes — ELRING 455740
with Seal RingBolt Head-/Nut Design: Male HexThread Size: M12X1,5x16
SDRIVE20IBody code: G01
M CompetitionBody code: F97
View on
Amazon
ELRING Fits: all 2022 X3 engines 427210
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
without Seal RingBolt Head-/Nut Design: Male Hex
Fitment notes — ELRING 427210
without Seal RingBolt Head-/Nut Design: Male HexThread Size: M12X1,5x16
SDRIVE20IBody code: G01
M CompetitionBody code: F97
View on
Amazon
REIN Fits: all 2022 X3 engines HWU1041
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: all 2022 X3 engines 21010400
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits SDRIVE20IEngine # B48B20A
Fitment notes — AJUSA 21010400
Fits:
SDRIVE20IEngine # B48B20Awith Original Equipment (OE) # 7119963132or sDrive30i or xDrive30i or xDrive30i Outdoor Edition or xDrive30i ProtectionEngine # B46B20Bwith Original Equipment (OE) # 7119963132
with Original Equipment (OE) # 7119963132
View on
Amazon
ELRING Fits: all 2022 X3 engines 110507
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Material: CopperOutside Diameter: 16.0 mm
Fitment notes — ELRING 110507
Material: CopperOutside Diameter: 16.0 mm
SDRIVE20IBody code: G01
M CompetitionBody code: F97
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filler Cap

Brand Part Number Markets Notes Buy
MOTORAD Fits: all 2022 X3 engines MO214
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the caps on the oil filler neck.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
PRO-TEC Popular Fits: 2.0L L4 Turbocharged PXL10358
🇺🇸 US
View on
Amazon
CHAMP / LUBER-FINER Fits: 2.0L L4 Turbocharged P1071
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
FVP Fits: 2.0L L4 Turbocharged G0358
🇺🇸 US
View on
Amazon
FVP Fits: 3.0L L6 Turbocharged G0342
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M40I ModelOriginal Equipment (OE) Part Number 11428583898
View on
Amazon
PRO-TEC Fits: 3.0L L6 Turbocharged PXL10342
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M40i Model
View on
Amazon
ULTRA-POWER Fits: all 2022 X3 engines WL10358
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits or Orig Equipment #11-42 8 575 211
Fitment notes — ULTRA-POWER WL10358
Fits:
or Orig Equipment #11-42 8 575 211
Orig Equipment #11-42 8 575 211
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
MOBIL Fits: 2.0L L4 Turbocharged M1C354A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Extended Performance
View on
Amazon
MOBIL Fits: 3.0L L6 Turbocharged M1C457A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Extended Performance
Fitment notes — MOBIL M1C457A
Extended Performance
M40I ModelHigh Output Engine
View on
Amazon
WIX Fits: 2.0L L4 Turbocharged WL10358XP
🇺🇸 US
XP Extreme DutyBest for Synthetic Motor Oils
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
HENGST Popular Fits: 3.0L L6 Turbocharged E859HD352
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes Gasket SetCartridge
Fitment notes — HENGST E859HD352
Includes Gasket SetCartridge
M40i Model
View on
Amazon
MAHLE / CLEVITE Popular Fits: 2.0L L4 Turbocharged OX8132D
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Cartridge
View on
Amazon
MAHLE / CLEVITE Popular Fits: 3.0L L6 Turbocharged OX1146D
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Cartridge
View on
Amazon
MANN Popular Fits: 2.0L L4 Turbocharged HU60141Z
🇺🇸 US
View on
Amazon
MANN Popular Fits: 3.0L L6 Turbocharged HU6022Z
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M40i Model
View on
Amazon
BECK/ARNLEY Fits: 2.0L L4 Turbocharged 0410882
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
FEL-PRO Fits: 2.0L L4 Turbocharged OFCS2040
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes Cap and Filter
View on
Amazon
HASTINGS / BALDWIN Fits: 3.0L L6 Turbocharged P40076
🇺🇸 US 🇨🇦 CA
MILD HYBRID EV-GAS MHEV
View on
Amazon
HENGST Fits: 2.0L L4 Turbocharged E362HD313
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes Gasket SetCartridge
View on
Amazon
HENGST Fits: 3.0L L6 Turbocharged E258HD379
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes Gasket SetCartridge
Fitment notes — HENGST E258HD379
Includes Gasket SetCartridge
M Competition or M Model
View on
Amazon
MANN Fits: 3.0L L6 Turbocharged HU6032Z
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M Competition or M Model
View on
Amazon
VARIOUS MFR Fits: 2.0L L4 Turbocharged PO99460EX
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Extended Life
View on
Amazon
VARIOUS MFR Fits: 3.0L L6 Turbocharged PG99550EX
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Extended Life
Fitment notes — VARIOUS MFR PG99550EX
Extended Life
M Competition or M Model
View on
Amazon
VARIOUS MFR Fits: 3.0L L6 Turbocharged PG99256EX
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Extended Life
Fitment notes — VARIOUS MFR PG99256EX
Extended Life
M40i Model
View on
Amazon
WIX Fits: 2.0L L4 Turbocharged WL10358
🇺🇸 US
View on
Amazon
WIX Fits: 3.0L L6 Turbocharged WL10656
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M Competition or M Model
View on
Amazon
WIX Fits: 3.0L L6 Turbocharged WL10342
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M40i Model
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Filter Adapter Gasket / O-Ring

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged B33885
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Oil Filter Adapter GasketMolded Rubber
View on
Amazon

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Oil Filter Cover

Brand Part Number Markets Notes Buy
MOTORAD Fits: 2.0L L4 Turbocharged MO373
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
MOTORAD Fits: 3.0L L6 Turbocharged MO388
🇺🇸 US 🇨🇦 CA
MILD HYBRID EV-GAS (MHEV)
View on
Amazon
REIN Fits: 3.0L L6 Turbocharged CPL0070
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M40i Model
View on
Amazon

This table covers the Oil Filter covers.

Oil Filter Housing

Brand Part Number Markets Notes Buy
DORMAN Fits: 2.0L L4 Turbocharged 918943
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
DORMAN Fits: 3.0L L6 Turbocharged 926453
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
OE FIX
Fitment notes — DORMAN 926453
OE FIX
M40i ModelBody code G01
View on
Amazon
ELRING Fits: 2.0L L4 Turbocharged B34630
🇲🇽 MX
with Oil Cooler
Fitment notes — ELRING B34630
with Oil Cooler
SDRIVE20IBody code: G01
View on
Amazon
HENGST Fits: 3.0L L6 Turbocharged H811H
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with E859H D352 Filter, Oil Cooler and Bolts/Screws
View on
Amazon
ÜRO PARTS Fits: 2.0L L4 Turbocharged 11428580414
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes CoolerColor: Black & Silver
Fitment notes — ÜRO PARTS 11428580414
Includes CoolerColor: Black & Silver
sDrive30i or xDrive30i
View on
Amazon
ÜRO PARTS Fits: 2.0L L4 Turbocharged 11428580414PRM
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
ÜRO SolutionsColor: Gray
Fitment notes — ÜRO PARTS 11428580414PRM
ÜRO SolutionsColor: GrayHeavy Duty Aluminum UpgradeIncludes Cooler
sDrive30i or xDrive30iAluminum Upgrade
View on
Amazon

This table covers the Oil Filter housings.

Oil Filter Housing Seal

Brand Part Number Markets Notes Buy
ELRING Fits: 2.0L L4 Turbocharged 083280
🇲🇽 MX
Number of Gaskets/Seals/Seal Rings: 3
Fitment notes — ELRING 083280
Number of Gaskets/Seals/Seal Rings: 3
Engine SidedSDRIVE20IBody code: G01
View on
Amazon
ELRING Fits: 2.0L L4 Turbocharged B27620
🇲🇽 MX
Engine SidedSDRIVE20I
Fitment notes — ELRING B27620
Engine SidedSDRIVE20IBody code: G01
View on
Amazon
ELRING Fits: 3.0L L6 Turbocharged 784620
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Engine SidedM Competition
Fitment notes — ELRING 784620
Engine SidedM CompetitionBody code: F97
View on
Amazon

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Level Sensor Gasket / O-Ring

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 Turbocharged 16078650
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
ELRING Fits: all 2022 X3 engines 351210
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Colour: BlackMaterial: AEM (Ethylene Acrylate Rubber)
Fitment notes — ELRING 351210
Colour: BlackMaterial: AEM (Ethylene Acrylate Rubber)
SDRIVE20IBody code: G01
M CompetitionBody code: F97
View on
Amazon
ELRING Fits: all 2022 X3 engines 078500
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Material: AEM (Ethylene Acrylate Rubber)
Fitment notes — ELRING 078500
Material: AEM (Ethylene Acrylate Rubber)
SDRIVE20IBody code: G01
M CompetitionBody code: F97
View on
Amazon

This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Oil Pan

Brand Part Number Markets Notes Buy
REIN Fits: 2.0L L4 Turbocharged ESK0244
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Kit
View on
Amazon
REIN Fits: 3.0L L6 Turbocharged ESK0249
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Kit
Fitment notes — REIN ESK0249
Kit
M40i Model
View on
Amazon

This table covers the oil pans that hold the engine's oil sump.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
VICTOR REINZ Fits: all 2022 X3 engines 703141410
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RTV Silicone
Fitment notes — VICTOR REINZ 703141410
RTV Silicone
Engine Code B46B20O0B46B20O0 Engine
Engine Code B58B30O1 or Engine Code S58B30T0
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump Chain

Brand Part Number Markets Notes Buy
CLOYES Fits: 2.0L L4 Turbocharged C529
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Engine Oil Pump Chain
View on
Amazon

This table covers the chains that drive the oil pump.

Oil Pump Sprocket

Brand Part Number Markets Notes Buy
CLOYES Fits: all 2022 X3 engines S1172
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
MILD HYBRID EV-GAS (MHEV)
View on
Amazon

This table covers the Oil Pump sprockets.

Timing Cam Sprocket

Brand Part Number Markets Notes Buy
INA Fits: 2.0L L4 Turbocharged VV1123
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
ExhaustInclude Hybrid Models
View on
Amazon

This table covers the Timing Cam sprockets.

Timing Chain

Brand Part Number Markets Notes Buy
CLOYES Fits: 2.0L L4 Turbocharged C528
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the timing chains that keep the cams in time with the crank.

Timing Chain & Component Kit

Brand Part Number Markets Notes Buy
CLOYES Fits: 2.0L L4 Turbocharged 90528SX
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Does Not Include SprocketsIncludes Timing Chain Tensioner, Chain Guide (2), Chain Tensioner Guide, Timing Chain, Oil Pump Chain
View on
Amazon
CLOYES Fits: 2.0L L4 Turbocharged 90528S
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes: Timing Chain Tensioner, Timing Chain Guide (2), Timing Chain Tensioner Guide, Timing Chain, Oil Pump Chain, Oil Pump Sprocket
View on
Amazon

This table covers kits that group a timing chain with the related tensioners and guides.

Timing Chain Guide / Damper

Brand Part Number Markets Notes Buy
CLOYES Fits: 2.0L L4 Turbocharged 96180
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Engine Timing Chain Guide
Fitment notes — CLOYES 96180
Engine Timing Chain Guide
Right
View on
Amazon
CLOYES Fits: 2.0L L4 Turbocharged 96181
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Engine Timing Chain Guide
Fitment notes — CLOYES 96181
Engine Timing Chain Guide
Upper
View on
Amazon
CLOYES Fits: 2.0L L4 Turbocharged 96182
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Engine Timing Chain Tensioner Guide
Fitment notes — CLOYES 96182
Engine Timing Chain Tensioner Guide
Tensioner Arm
View on
Amazon

This table covers the guides and dampers that keep the timing chain on its path.

Timing Chain Tensioner

Brand Part Number Markets Notes Buy
CLOYES Fits: 2.0L L4 Turbocharged 96179
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Engine Timing Chain Tensioner
View on
Amazon

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.

Timing Cover Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 Turbocharged 77090600
🇲🇽 MX
sDrive20i
View on
Amazon

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Turbocharger

Brand Part Number Markets Notes Buy
BORG-WARNER Fits: 3.0L L6 Turbocharged 18559880116
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M40I Modelwith OE No. 11657934387
View on
Amazon

This table covers the turbochargers that compress intake air.

Turbocharger Coolant Line

Brand Part Number Markets Notes Buy
REIN Fits: 2.0L L4 Turbocharged CHT0924
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Return
View on
Amazon
REIN Fits: 2.0L L4 Turbocharged CHT0923
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Supply
View on
Amazon
REIN Fits: 3.0L L6 Turbocharged CHT0972
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
ReturnM40i Model
View on
Amazon
REIN Fits: 3.0L L6 Turbocharged CHT0971
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SupplyM40i Model
View on
Amazon
SUNSONG Fits: 3.0L L6 Turbocharged 5804195
🇺🇸 US 🇨🇦 CA
SupplyMild Hybrid EV-Gas (MHEV)
View on
Amazon
ÜRO PARTS Fits: 3.0L L6 Turbocharged 11538666857
🇺🇸 US 🇨🇦 CA
Water Pump To PipeMild Hybrid EV-Gas (MHEV)
Fitment notes — ÜRO PARTS 11538666857
Water Pump To PipeMild Hybrid EV-Gas (MHEV)Return Line
View on
Amazon

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.

Turbocharger Gasket

Brand Part Number Markets Notes Buy
AJUSA Popular Fits: 2.0L L4 Turbocharged 01335100
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Exhaust
View on
Amazon
AJUSA Popular Fits: 3.0L L6 Turbocharged 01158200
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M Competition or M ModelExhaust
View on
Amazon
MAHLE / CLEVITE Popular Fits: 2.0L L4 Turbocharged F33665
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Steel
View on
Amazon
ELRING Fits: all 2022 X3 engines 094830
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Charge Air Hose
View on
Amazon
ELRING Fits: all 2022 X3 engines 087320
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
ELRING Fits: 2.0L L4 Turbocharged 082230
🇲🇽 MX
Charge Air HoseSDRIVE20I
Fitment notes — ELRING 082230
Charge Air HoseSDRIVE20IBody code: G01
View on
Amazon
ELRING Fits: 2.0L L4 Turbocharged 082240
🇲🇽 MX
Suction PipeSDRIVE20I
Fitment notes — ELRING 082240
Suction PipeSDRIVE20IBody code: G01
View on
Amazon
ELRING Fits: all 2022 X3 engines 087370
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
ELRING Fits: 3.0L L6 Turbocharged 113510
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M CompetitionBody code: F97
View on
Amazon

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Turbocharger Inlet Hose Gasket

Brand Part Number Markets Notes Buy
ELRING Fits: 3.0L L6 Turbocharged 113670
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M CompetitionBody code: F97
View on
Amazon

This table covers the gaskets that seal the Turbocharger Inlet Hose. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Turbocharger Mounting Hardware

Brand Part Number Markets Notes Buy
ELRING Fits: 2.0L L4 Turbocharged 085550
🇲🇽 MX
with gaskets/sealswith Bolts/Screws
Fitment notes — ELRING 085550
with gaskets/sealswith Bolts/Screws
SDRIVE20IBody code: G01
View on
Amazon
ELRING Fits: 3.0L L6 Turbocharged 114510
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with gaskets/sealswith Bolts/Screws
Fitment notes — ELRING 114510
with gaskets/sealswith Bolts/Screwsfor OE Number: 11658679021
M CompetitionBody code: F97
View on
Amazon

This table covers the fasteners that mount the turbocharger.

Turbocharger Oil Line

Brand Part Number Markets Notes Buy
REIN Popular Fits: 2.0L L4 Turbocharged TFP0376
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Supply Line
View on
Amazon
REIN Popular Fits: 3.0L L6 Turbocharged TRP0391
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M40I ModelReturn Line
View on
Amazon
AJUSA Fits: 2.0L L4 Turbocharged OP10925
🇲🇽 MX
SDRIVE20IEngine # B48B20A
Fitment notes — AJUSA OP10925
SDRIVE20IEngine # B48B20ASupply Tube
View on
Amazon
AJUSA Fits: 2.0L L4 Turbocharged OP11220
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
sDrive30i or xDrive30i or xDrive30i Outdoor Edition or xDrive30i ProtectionEngine # B46B20B
Fitment notes — AJUSA OP11220
sDrive30i or xDrive30i or xDrive30i Outdoor Edition or xDrive30i ProtectionEngine # B46B20BSupply Tube
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged OP11237
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M40I ModelSupply Tube
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged OP11305
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M Competition or M Modelfor Cylinders 1 To 3 Only
Fitment notes — AJUSA OP11305
M Competition or M Modelfor Cylinders 1 To 3 OnlySupply Tube
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged OP11315
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M Competition or M Modelfor Cylinders 4 To 6 Only
Fitment notes — AJUSA OP11315
M Competition or M Modelfor Cylinders 4 To 6 OnlySupply Tube
View on
Amazon
REIN Fits: 2.0L L4 Turbocharged TRP0377
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Return Line
View on
Amazon
REIN Fits: 3.0L L6 Turbocharged TFP0393
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M40I ModelSupply Line
View on
Amazon
ÜRO PARTS Fits: 2.0L L4 Turbocharged 11428629969
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Engine Code B46B20O0
View on
Amazon

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.

Turbocharger Oil Line Gasket / O-Ring

Brand Part Number Markets Notes Buy
AJUSA Fits: all 2022 X3 engines 16006101
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SDRIVE20ITurbocharger Coolant Line O-Ring
Fitment notes — AJUSA 16006101
SDRIVE20ITurbocharger Coolant Line O-Ring
M Competition or M ModelTurbocharger Coolant Line O-Ring
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged 01335200
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M Competition or M Model
View on
Amazon
ELRING Fits: 2.0L L4 Turbocharged 876070
🇲🇽 MX
SDRIVE20IBody code: G01
View on
Amazon
ELRING Fits: 2.0L L4 Turbocharged 202790
🇲🇽 MX
Inner Diameter [MM]: 9.5Material: FPM (fluoride rubber)
Fitment notes — ELRING 202790
Inner Diameter [MM]: 9.5Material: FPM (fluoride rubber)
SDRIVE20IBody code: G01
View on
Amazon

This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Turbocharger Wastegate Solenoid / Actuator

Brand Part Number Markets Notes Buy
DORMAN Fits: 2.0L L4 Turbocharged 667845
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
SKP Fits: 2.0L L4 Turbocharged SK6T50672
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
sDrive30i or xDrive30iwith Engine Code B48
View on
Amazon

This table covers the Turbocharger Wastegate Solenoid actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.

Valve Cover

Brand Part Number Markets Notes Buy
ELRING Fits: 2.0L L4 Turbocharged B09610
🇲🇽 MX
with Valve Cover Gasketwith Bolts/Screws
Fitment notes — ELRING B09610
with Valve Cover Gasketwith Bolts/Screws
SDRIVE20IBody code: G01
View on
Amazon
ELRING Fits: 2.0L L4 Turbocharged B37590
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with Valve Cover Gasket
Fitment notes — ELRING B37590
with Valve Cover Gasket
xDrive30i
View on
Amazon
SKP Fits: all 2022 X3 engines SK743462
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
ÜRO PARTS Fits: 3.0L L6 Turbocharged 11128691779
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes Valve Cover Gasket Set
Fitment notes — ÜRO PARTS 11128691779
Includes Valve Cover Gasket Set
M40i Model
View on
Amazon
VAICO Fits: 3.0L L6 Turbocharged V204929
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Description: with valve cover gasket
Fitment notes — VAICO V204929
Description: with valve cover gasket
M40I ModelGrade: AM
View on
Amazon

This table covers the Valve covers.

Valve Cover Bolt / Screw

Brand Part Number Markets Notes Buy
ÜRO PARTS Fits: all 2022 X3 engines 11129454322
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits SDRIVE30I6x30.0mm Torx Heador xDrive30i
Fitment notes — ÜRO PARTS 11129454322
Fits:
SDRIVE30I6x30.0mm Torx Heador xDrive30i6x30.0mm Torx Head
M40I Model6x30.0mm Torx Head
View on
Amazon

This table covers the Valve Cover Bolt screws. Typical signs include a rounded head, a seeping bleeder, or a fastener that will not hold torque. Do not force a new screw into a stripped hole — repair the thread first.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
BECK/ARNLEY Popular Fits: 2.0L L4 Turbocharged 0362095
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes Spark Plug Tube Seals
View on
Amazon
ELRING Popular Fits: 2.0L L4 Turbocharged 593300
🇲🇽 MX
Material: Ethylene Acrylic Elastomer (AEM)
Fitment notes — ELRING 593300
Material: Ethylene Acrylic Elastomer (AEM)
SDRIVE20IBody code: G01
View on
Amazon
MAHLE / CLEVITE Popular Fits: 3.0L L6 Turbocharged VS50985
🇲🇽 MX
SetMolded Rubber
Fitment notes — MAHLE / CLEVITE VS50985
SetMolded RubberContains Inner and Outer Valve Cover Gaskets
Engine Code B58B30M0
View on
Amazon
AJUSA Fits: 2.0L L4 Turbocharged 11140100
🇲🇽 MX
sDrive20iEngine # B48B20A
View on
Amazon
AJUSA Fits: 2.0L L4 Turbocharged 11162700
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
sDrive30i or xDrive30i or xDrive30i Outdoor Edition or xDrive30i ProtectionEngine # B46B20B
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged 11172800
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M Competition or M Model
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged 56080600
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M40i Model
View on
Amazon
ELRING Fits: 2.0L L4 Turbocharged 083720
🇲🇽 MX
for OE Number: 11-12 9-452 895Material: Zinc-Copper brazing alloy (ZN-CU)
Fitment notes — ELRING 083720
for OE Number: 11-12 9-452 895Material: Zinc-Copper brazing alloy (ZN-CU)
SDRIVE20IBody code: G01
View on
Amazon
ELRING Fits: 3.0L L6 Turbocharged 091010
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Material: DI HT
Fitment notes — ELRING 091010
Material: DI HT
M CompetitionBody code: F97
View on
Amazon
MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged VS50987
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Molded Rubber
Fitment notes — MAHLE / CLEVITE VS50987
Molded Rubber
1 piece
View on
Amazon
VICTOR REINZ Fits: 2.0L L4 Turbocharged 711743700
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Engine Code B46B20O0B46B20O0 Engine
View on
Amazon
VICTOR REINZ Fits: 2.0L L4 Turbocharged 151122101
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
Fitment notes — VICTOR REINZ 151122101
Set
Engine Code B46B20O0B46B20O0 Engine
View on
Amazon
VICTOR REINZ Fits: 3.0L L6 Turbocharged 151120501
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
Fitment notes — VICTOR REINZ 151120501
Set
with Engine Code B58B30B
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Lifter

Brand Part Number Markets Notes Buy
AJUSA Fits: all 2022 X3 engines 85022300
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits sDrive20iEngine # B48B20Aor sDrive30i or xDrive30i or xDrive30i Outdoor Edition or xDrive30i Protection
Fitment notes — AJUSA 85022300
Fits:
sDrive20iEngine # B48B20Aor sDrive30i or xDrive30i or xDrive30i Outdoor Edition or xDrive30i ProtectionEngine # B46B20B
View on
Amazon

This table covers the lifters / tappets that transfer cam motion to the valves.

Valve Stem Seal

Brand Part Number Markets Notes Buy
ELRING Popular Fits: 2.0L L4 Turbocharged 308970
🇲🇽 MX
SetMaterial: FPM (fluoride rubber)
Fitment notes — ELRING 308970
SetMaterial: FPM (fluoride rubber)
SDRIVE20IBody code: G01
View on
Amazon
ELRING Popular Fits: 2.0L L4 Turbocharged 308630
🇲🇽 MX
SetMaterial: FPM (fluoride rubber)
Fitment notes — ELRING 308630
SetMaterial: FPM (fluoride rubber)
SDRIVE20IBody code: G01
View on
Amazon
ELRING Popular Fits: 3.0L L6 Turbocharged 364500
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SetMaterial: FPM (fluoride rubber)
Fitment notes — ELRING 364500
SetMaterial: FPM (fluoride rubber)Valve Stem Diameter [MM]: 5
M CompetitionBody code: F97
View on
Amazon
ELRING Popular Fits: 3.0L L6 Turbocharged 660360
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SetMaterial: FPM (fluoride rubber)
Fitment notes — ELRING 660360
SetMaterial: FPM (fluoride rubber)Valve Stem Diameter [MM]: 6
M CompetitionBody code: F97
View on
Amazon
AJUSA Fits: 2.0L L4 Turbocharged 57067700
🇲🇽 MX
sDrive20iEngine # B48B20A
View on
Amazon
AJUSA Fits: 3.0L L6 Turbocharged 57051500
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
FEL-PRO Fits: 2.0L L4 Turbocharged SS73259
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
Fitment notes — FEL-PRO SS73259
Set
Exhaust
View on
Amazon
MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged SS46090
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FluoroelastomerContains 8
Fitment notes — MAHLE / CLEVITE SS46090
FluoroelastomerContains 8
Intake
View on
Amazon
MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged SS46008A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FluoroelastomerContains 8
Fitment notes — MAHLE / CLEVITE SS46008A
FluoroelastomerContains 8
Exhaust6mm Shaft Diameter
View on
Amazon
MAHLE / CLEVITE Fits: 3.0L L6 Turbocharged SS46008
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SetMetal with Molded Rubber
Fitment notes — MAHLE / CLEVITE SS46008
SetMetal with Molded Rubber
ExhaustEngine Code B58B30O1 or Engine Code S58B30T06mm Shaft Diameter
View on
Amazon
VICTOR REINZ Fits: 2.0L L4 Turbocharged 123686603
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SetContains 8 Pieces
Fitment notes — VICTOR REINZ 123686603
SetContains 8 Pieces
IntakeEngine Code B46B20O0
View on
Amazon
VICTOR REINZ Fits: 2.0L L4 Turbocharged 123725603
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SetContains 8 Pieces
Fitment notes — VICTOR REINZ 123725603
SetContains 8 Pieces
ExhaustEngine Code B46B20O0
View on
Amazon
VICTOR REINZ Fits: 3.0L L6 Turbocharged 123686601
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SetContains 12 Pieces
Fitment notes — VICTOR REINZ 123686601
SetContains 12 Pieces
IntakeEngine Code B58B30O1 or Engine Code S58B30T0
View on
Amazon
VICTOR REINZ Fits: 3.0L L6 Turbocharged 123725601
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SetContains 12 Pieces
Fitment notes — VICTOR REINZ 123725601
SetContains 12 Pieces
ExhaustEngine Code B58B30O1 or Engine Code S58B30T0
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Variable Valve Timing (VVT) Eccentric Shaft Actuator

Brand Part Number Markets Notes Buy
ÜRO PARTS Fits: 2.0L L4 Turbocharged 11378652738
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
sDrive30i or xDrive30ifor Valvetronic System
View on
Amazon

This table covers the Variable Valve Timing (VVT) Eccentric Shaft actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.

Variable Valve Timing (VVT) Solenoid / Actuator

Brand Part Number Markets Notes Buy
GATES Popular Fits: all 2022 X3 engines VVS229
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M Competition or M Model
View on
Amazon
HOLSTEIN Fits: all 2022 X3 engines 2VTS0370
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Adjuster Magnet
Fitment notes — HOLSTEIN 2VTS0370
Adjuster Magnet
Vanos Actuator
View on
Amazon
ÜRO PARTS Fits: 3.0L L6 Turbocharged 11368696446
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Oil Control
View on
Amazon
VEMO Fits: all 2022 X3 engines V20540005
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Oil Control
Fitment notes — VEMO V20540005
Oil Control
sDrive30i or xDrive30i
Engine Code B58B30O1 or Engine Code S58B30T0
View on
Amazon
VNE Fits: 3.0L L6 Turbocharged 4022002
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Actuator
View on
Amazon
VNE Fits: 3.0L L6 Turbocharged 4022005
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Oil Pump Control Valve
View on
Amazon
WELLS Fits: 2.0L L4 Turbocharged 2T1286
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Adjuster Magnet
View on
Amazon
WELLS Fits: 2.0L L4 Turbocharged 2T1249
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.

Variable Valve Timing (VVT) Solenoid Gasket / Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: all 2022 X3 engines 01907000
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Variable Valve Timing (VVT) Sprocket

Brand Part Number Markets Notes Buy
INA Fits: 2.0L L4 Turbocharged VV1122
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Intake
View on
Amazon

This table covers the cam phaser sprockets used by the variable-valve-timing system.

Buying Engine Parts for a 2022 BMW X3

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Filter and Cylinder Head Gasket .

Frequently Asked Questions

How many engine parts fit the 2022 BMW X3?

Our catalog currently lists 244 engine parts for the 2022 BMW X3 across 54 subcategories and 41 brands, covering both the 2.0L L4 Turbocharged and the 3.0L L6 Turbocharged. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2022 BMW X3 engines?

Some do. 43 parts fit every engine; the other 201 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2022 BMW X3?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What oil viscosity is listed for the 2022 BMW X3?

Oil rows on this page include SAE 0W-20, SAE 0W-30 and SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2022 BMW X3 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2022 BMW X3?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2022 BMW X3

Engine Parts for Other BMW X3 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.