2024 BMW M2 Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 54320500.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

AJUSA supplies both parts for the 2024 BMW M2.

Part numbers include AJUSA 15075200 and AJUSA 15107900.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts for the 2024 BMW M2 come from 2 brands — AJUSA and MAHLE / CLEVITE.

This group includes AJUSA 81082000 and MAHLE / CLEVITE GS33999.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 10260600.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 52601200.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 50546600.

This table covers the Harmonic Balancer bolts. Read more

One part is listed for the 2024 BMW M2 — REIN HWB0074.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE MS20465.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Motor Mount parts are listed for the 2024 BMW M2, from ANCHOR and PIONEER.

This group includes ANCHOR 10258, ANCHOR 10259 and PIONEER 610258 and the remaining parts above.

This table covers the Motor Mount kits. Read more

One part is listed for the 2024 BMW M2 — ANCHOR 300959.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

5 Oil parts are listed for the 2024 BMW M2, from LIQUI MOLY and VALVOLINE. VALVOLINE 787301 carries the "Popular" badge.

Listed part numbers: VALVOLINE 787301, LIQUI MOLY 22260 and LIQUI MOLY 22261, plus the other parts above.

This table covers the drain plugs in the oil pan. Read more

2 Oil Drain Plug parts are listed for the 2024 BMW M2, from DORMAN and REIN.

Listed part numbers: DORMAN 090088 and REIN HWU1041.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 21010400.

This table covers the caps on the oil filler neck. Read more

One part is listed for the 2024 BMW M2 — MOTORAD MO214.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

6 Oil Filter parts are listed for the 2024 BMW M2, from ULTRA-POWER, HENGST, MANN and 3 other brands. HENGST E258HD379 carries the "Popular" badge.

In the Economy grade, ULTRA-POWER supplies 1 part: the catalog's value-priced group. A representative part number is ULTRA-POWER 57327.

The Standard Replacement section lists 4 options from HENGST, MANN, VARIOUS MFR and 1 other brand — built to original-equipment specification. HENGST E258HD379 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Part numbers include HENGST E258HD379, ULTRA-POWER 57327 and MANN HU6032Z, among others listed above.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 01835400.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Turbocharger Gasket parts for the 2024 BMW M2 come from 2 brands — AJUSA and ELRING.

Part numbers include AJUSA 01158200, AJUSA JTC12650 and ELRING 087320.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

AJUSA supplies both parts for the 2024 BMW M2.

This group includes AJUSA OP11305 and AJUSA OP11315.

This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2024 BMW M2 — AJUSA 01335200.

This table covers the Valve covers. Read more

This group shows a single part: SKP SK743462.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2024 BMW M2 — AJUSA 11172800.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

One part is listed for the 2024 BMW M2 — AJUSA 85022300.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Valve Stem Seal parts are listed for the 2024 BMW M2, from AJUSA and MAHLE / CLEVITE.

Part numbers include AJUSA 57051500, AJUSA 12027900 and AJUSA 12028200, among others listed above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

6 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2024 BMW M2, from WELLS, GATES, ÜRO PARTS and 2 other brands. GATES VVS229 carries the "Popular" badge.

Part numbers include GATES VVS229, ÜRO PARTS 11367614288 and HOLSTEIN 2VTS0370, among others listed above.

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: AJUSA 01907000.