2025 BMW 228 Cooling System Parts

Engine:
2.0L L4 Turbocharged

9 Cooling system parts are listed for the 2025 BMW 228, in 4 part types, covering the 2.0L L4 Turbocharged engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

The cooling system system on the 2025 BMW 228 keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses. The largest groups are Coolant / Antifreeze (4 parts), Coolant Reservoir Cap (2 parts) and Water Pump (2 parts). The other 1 part type covers the remaining 1 part.

Coolant / Antifreeze

Economy

Brand Part Number Markets Notes Buy
VALVOLINE 719009
🇺🇸 US 🇨🇦 CA
Multi-Vehicle Yellow1 Gallon
View on
Amazon

Premium

Brand Part Number Markets Notes Buy
PRESTONE AF6110
🇺🇸 US 🇨🇦 CA
MAX Original EquipmentEuropean Blue
Fitment notes — PRESTONE AF6110
MAX Original EquipmentEuropean Blue1 Gallon
(Type: Prediluted)
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
VALVOLINE 904685
🇺🇸 US 🇨🇦 CA
HT-12 Green1 Gallon
Fitment notes — VALVOLINE 904685
HT-12 Green1 Gallon
(Type: Concentrated)
View on
Amazon
Brand Part Number Markets Notes Buy
PRESTONE 78023
🇺🇸 US 🇨🇦 CA
European Vehicles (Teal)1 Gallon
Fitment notes — PRESTONE 78023
European Vehicles (Teal)1 Gallon
(Type: Prediluted)
View on
Amazon

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator.

Coolant Reservoir Cap

Brand Part Number Markets Notes Buy
MOTORAD T76
🇺🇸 US 🇨🇦 CA
Standard
Fitment notes — MOTORAD T76
Standard
Relief Pressure 17 lbs
View on
Amazon
REIN CPE0078
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.

Water Pump

Brand Part Number Markets Notes Buy
FVP 1153350
🇺🇸 US 🇨🇦 CA
View on
Amazon
GMB 1153350
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off.

Water Pump Gasket

Brand Part Number Markets Notes Buy
ELRING 091830
🇺🇸 US 🇨🇦 CA
Body code: F74
View on
Amazon

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Buying Cooling System Parts for a 2025 BMW 228

On this vehicle, the cooling system system keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses.

  • Confirm you have the 2.0L L4 Turbocharged engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Coolant / Antifreeze and Coolant Reservoir Cap .

Frequently Asked Questions

How many cooling system parts fit the 2025 BMW 228?

Our catalog currently lists 9 cooling system parts for the 2025 BMW 228 across 4 subcategories and 7 brands, covering the 2.0L L4 Turbocharged engine. Each part is matched to the engine(s) it fits.

What are the signs of cooling system problems on a 2025 BMW 228?

Common symptoms include a rising temperature gauge in traffic, sweet-smelling steam, crusty deposits around hose clamps, or a heater that blows cold. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2025 BMW 228 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2025 BMW 228?

Every part on this page is matched to the 2.0L L4 Turbocharged engine. Then replace coolant with the exact specification the manufacturer calls for — mixing chemistries can gel and block small passages. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2025 BMW 228

Cooling System Parts for Other BMW 228 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.