2025 BMW X1 Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

The 2025 BMW X1 has 34 engine parts with verified fitment on this page — 14 part types and 24 brands, covering all 3 engine options (1.5L L3 ELECTRIC/GAS Turbocharged, 1.5L L3 Turbocharged and 2.0L L4 Turbocharged). Each part includes a manufacturer part number and application notes.

On the 2025 BMW X1, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 22 parts of the 34 listed are Oil Filter (12 parts), Oil (6 parts) and Variable Valve Timing (VVT) Solenoid / Actuator (4 parts). The other 11 part types cover the remaining 12 parts.

Harmonic Balancer Bolt

Brand Part Number Markets Notes Buy
REIN Fits: 2.0L L4 Turbocharged HWB0074
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
10 x 65mm
View on
Amazon

This table covers the Harmonic Balancer bolts.

Oil

Summary: Notes list SAE 0W-20. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include LIQUI MOLY, PENTOSIN and VALVOLINE.

Brand Part Number Markets Notes Buy
LIQUI MOLY Popular Fits: 2.0L L4 Turbocharged 22044
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Top Tec 6600 0W-201 Liter
View on
Amazon
LIQUI MOLY Popular Fits: 2.0L L4 Turbocharged 22046
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Top Tec 6600 0W-205 Liter
View on
Amazon
LIQUI MOLY Fits: 2.0L L4 Turbocharged 22048
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Top Tec 6600 0W-2020 Liter
View on
Amazon
PENTOSIN Fits: 2.0L L4 Turbocharged 8044317
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Pento Speed FESAE 0W-20
Fitment notes — PENTOSIN 8044317
Pento Speed FESAE 0W-201 Liter
View on
Amazon
PENTOSIN Fits: 2.0L L4 Turbocharged 8044319
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Pento Speed FESAE 0W-20
Fitment notes — PENTOSIN 8044319
Pento Speed FESAE 0W-205 Liters
View on
Amazon
VALVOLINE Fits: 2.0L L4 Turbocharged 888048
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
European Vehicle Full Synthetic SAE 0W-201 Quart
View on
Amazon

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.

Oil Drain Plug

Brand Part Number Markets Notes Buy
DORMAN Fits: all 2025 X1 engines 090088
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
MetalStandard
Fitment notes — DORMAN 090088
MetalStandardThread SizeM12-1.50Under-Head Length: 16.95mmHead Size: 17mmHead Style: Hex
View on
Amazon
REIN Fits: 2.0L L4 Turbocharged HWU1041
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Filler Cap

Brand Part Number Markets Notes Buy
MOTORAD Fits: 2.0L L4 Turbocharged MO214
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the caps on the oil filler neck.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
CHAMP / LUBER-FINER Fits: 2.0L L4 Turbocharged P1035
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
ULTRA-POWER Fits: 2.0L L4 Turbocharged WL7522
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits or Orig Equipment #11-42 8 570 590
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
MOBIL Fits: 2.0L L4 Turbocharged M1C262A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Extended Performance
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
MANN Popular Fits: 2.0L L4 Turbocharged HU6015ZKIT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
WIX Popular Fits: 2.0L L4 Turbocharged WL7522
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
FEL-PRO Fits: 2.0L L4 Turbocharged OFCS2039
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes Cap and Filter
View on
Amazon
HASTINGS / BALDWIN Fits: 2.0L L4 Turbocharged P40182
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
HENGST Fits: 2.0L L4 Turbocharged E833HD321
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes Gasket SetCartridge
View on
Amazon
MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged OX8151D
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Cartridge
View on
Amazon
VARIOUS MFR Fits: 2.0L L4 Turbocharged PG99098EX
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Extended Life
View on
Amazon
Brand Part Number Markets Notes Buy
BECK/ARNLEY Fits: 1.5L L3 ELECTRIC/GAS Turbocharged, 1.5L L3 Turbocharged 0410874
🇲🇽 MX
View on
Amazon
VARIOUS MFR Fits: 1.5L L3 ELECTRIC/GAS Turbocharged, 1.5L L3 Turbocharged PO99521EX
🇲🇽 MX
Extended Life
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Filter Housing

Brand Part Number Markets Notes Buy
HENGST Fits: 2.0L L4 Turbocharged H810H
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with E883H D321 filter, Oil cooler, gaskets/seals and bolts/screws
View on
Amazon

This table covers the Oil Filter housings.

Oil Level Sensor Gasket / O-Ring

Brand Part Number Markets Notes Buy
ELRING Fits: 1.5L L3 ELECTRIC/GAS Turbocharged 351210
🇲🇽 MX
Colour: BlackMaterial: AEM (Ethylene Acrylate Rubber)
View on
Amazon

This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Torque Strut Mount

Brand Part Number Markets Notes Buy
ANCHOR Fits: 2.0L L4 Turbocharged 10382
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear Lower
View on
Amazon

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.

Turbocharger Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 Turbocharged 01335100
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Exhaust
View on
Amazon

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Cover

Brand Part Number Markets Notes Buy
SKP Fits: 2.0L L4 Turbocharged SK743462
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the Valve covers.

Valve Stem Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged SS46008A
🇺🇸 US 🇨🇦 CA
FluoroelastomerContains 8
Fitment notes — MAHLE / CLEVITE SS46008A
FluoroelastomerContains 8
ExhaustXDRIVE28I6mm Shaft Diameter
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Variable Valve Timing (VVT) Eccentric Shaft Actuator

Brand Part Number Markets Notes Buy
ÜRO PARTS Fits: all 2025 X1 engines 11378652738
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
For Valvetronic System
View on
Amazon

This table covers the Variable Valve Timing (VVT) Eccentric Shaft actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.

Variable Valve Timing (VVT) Solenoid / Actuator

Brand Part Number Markets Notes Buy
ÜRO PARTS Fits: all 2025 X1 engines 11368696446
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Oil Control
View on
Amazon
VNE Fits: 2.0L L4 Turbocharged 4022005
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Oil Pump Control Valve
View on
Amazon
VNE Fits: 2.0L L4 Turbocharged 4022006
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Actuator
View on
Amazon
WELLS Fits: 2.0L L4 Turbocharged 2T1249
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.

Variable Valve Timing (VVT) Solenoid Gasket / Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 Turbocharged 01907000
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 2025 BMW X1

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Filter and Oil .

Frequently Asked Questions

How many engine parts fit the 2025 BMW X1?

Our catalog currently lists 34 engine parts for the 2025 BMW X1 across 14 subcategories and 24 brands, covering all 3 engine options (1.5L L3 ELECTRIC/GAS Turbocharged, 1.5L L3 Turbocharged and 2.0L L4 Turbocharged). Each part is matched to the engine(s) it fits.

Do engine parts differ between 2025 BMW X1 engines?

Some do. 3 parts fit every engine; the other 31 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2025 BMW X1?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What oil viscosity is listed for the 2025 BMW X1?

Oil rows on this page include SAE 0W-20. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2025 BMW X1 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2025 BMW X1?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2025 BMW X1

Engine Parts for Other BMW X1 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.