26 Engine parts are listed for the 2026 BMW 430I, in 13 part types, covering the 2.0L L4 Turbocharged engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
The engine on the 2026 BMW 430I covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil Filter (9 parts), Oil (5 parts) and Oil Pan (2 parts). The other 10 part types cover the remaining 10 parts.
The 2026 BMW 430I came with a single engine, the 2.0L L4 Turbocharged, and every part is verified against it.
16 brands supply engine parts for the 2026 BMW 430I, led by REIN (4 parts), LIQUI MOLY (3 parts) and MAHLE / CLEVITE (2 parts), plus 13 more brands. Quality grades include Economy, Standard Replacement and High Performance / Heavy Duty.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2026 BMW 430I. 3 parts have it, including LIQUI MOLY 22046 (Oil) and PRO-TEC PXL10358 (Oil Filter). Each part number opens a page with every vehicle that part fits.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | 68123 | 🇺🇸 US | PTFE (Polytetrafluoroethylene) | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: MAHLE / CLEVITE 68123.
Engine Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VARIOUS MFR | BM1228205 | 🇺🇸 US 🇨🇦 CA | Front LowerConvertible | View on Amazon |
This table covers the Engine covers.
One part is listed for the 2026 BMW 430I — VARIOUS MFR BM1228205.
Harmonic Balancer Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN | HWB0074 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 10 x 65mm | View on Amazon |
This table covers the Harmonic Balancer bolts.
This group shows a single part: REIN HWB0074.
Oil
Summary: Notes list SAE 0W-20 and SAE 0W-30. Confirm the weight on the filler cap before you buy. Replacement brands in this table include LIQUI MOLY and VALVOLINE.
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LIQUI MOLY Popular | 22046 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6600 0W-205 Liter | View on Amazon |
| LIQUI MOLY | 22044 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6600 0W-201 Liter | View on Amazon |
| LIQUI MOLY | 22048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6600 0W-2020 Liter | View on Amazon |
| VALVOLINE | 888048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | European Vehicle Full Synthetic SAE 0W-201 Quart | View on Amazon |
| VALVOLINE | 893931 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | European Vehicle Full Synthetic SAE 0W-301 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
5 Oil parts for the 2026 BMW 430I come from 2 brands — LIQUI MOLY and VALVOLINE. The "Popular" part is LIQUI MOLY 22046.
This group includes LIQUI MOLY 22046, LIQUI MOLY 22044 and LIQUI MOLY 22048 and the remaining parts above.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN | HWU1041 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the drain plugs in the oil pan.
This group shows a single part: REIN HWU1041.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORAD | MO214 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 430i Base Model or 430i xDrive Base Model | View on Amazon |
This table covers the caps on the oil filler neck.
This group shows a single part: MOTORAD MO214.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PRO-TEC Popular | PXL10358 | 🇺🇸 US 🇨🇦 CA | Fits or 430i xDrive Base Model | View on Amazon |
| CHAMP / LUBER-FINER | P1071 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FVP | G0358 | 🇺🇸 US 🇨🇦 CA | Fits or 430i xDrive Base ModelOriginal Equipment (OE) Part Number 11-42 8 575 211 | View on Amazon |
| ULTRA-POWER | WL10358 | 🇺🇸 US 🇨🇦 CA | Fits 430i xDrive (Except 430i xDrive Gran Coupe) | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL | M1C354A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance | View on Amazon |
| WIX | WL10358XP | 🇺🇸 US 🇨🇦 CA | XP Extreme DutyBest for Synthetic Motor Oils | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MANN Popular | HU60141Z | 🇺🇸 US 🇨🇦 CA | Fits or 430i xDrive Base Model | View on Amazon |
| VARIOUS MFR | PO99460EX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Life | View on Amazon |
| WIX | WL10358 | 🇺🇸 US 🇨🇦 CA | Fits or 430i xDrive Base Model | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
9 Oil Filter parts for the 2026 BMW 430I come from 8 brands — WIX, PRO-TEC, CHAMP / LUBER-FINER and 5 other brands. The "Popular" part is PRO-TEC PXL10358.
The Economy section lists 4 options from PRO-TEC, CHAMP / LUBER-FINER, FVP and 1 other brand — the catalog's value-priced group. PRO-TEC PXL10358 is listed in this group.
The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1C354A is listed in this group.
In the Standard Replacement grade, MANN, VARIOUS MFR and WIX supply 3 parts: built to original-equipment specification. A representative part number is MANN HU60141Z.
Part numbers include PRO-TEC PXL10358, CHAMP / LUBER-FINER P1071 and FVP G0358, among others listed above.
Oil Filter Adapter Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | B33885 | 🇺🇸 US 🇨🇦 CA | Oil Filter Adapter GasketMolded Rubber | View on Amazon |
This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
One part is listed for the 2026 BMW 430I — MAHLE / CLEVITE B33885.
Oil Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN | ESK0244 | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
| REIN | ESK0235 | 🇺🇸 US 🇲🇽 MX | Kit | View on Amazon |
This table covers the oil pans that hold the engine's oil sump.
REIN supplies both parts for the 2026 BMW 430I.
Part numbers include REIN ESK0244 and REIN ESK0235.
Turbocharger Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 01335100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2026 BMW 430I — AJUSA 01335100.
Turbocharger Wastegate Solenoid / Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 667845 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 430i Base Model or 430i xDrive Base Model | View on Amazon |
This table covers the Turbocharger Wastegate Solenoid actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
This group shows a single part: DORMAN 667845.
Valve Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP | SK743462 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Valve covers.
One part is listed for the 2026 BMW 430I — SKP SK743462.
Variable Valve Timing (VVT) Solenoid Gasket / Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 01907000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2026 BMW 430I — AJUSA 01907000.
Buying Engine Parts for a 2026 BMW 430I
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 2.0L L4 Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil Filter and Oil .
Frequently Asked Questions
How many engine parts fit the 2026 BMW 430I?
Our catalog currently lists 26 engine parts for the 2026 BMW 430I across 13 subcategories and 16 brands, covering the 2.0L L4 Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 2026 BMW 430I?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2026 BMW 430I?
Oil rows on this page include SAE 0W-20 and SAE 0W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2026 BMW 430I was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2026 BMW 430I?
Every part on this page is matched to the 2.0L L4 Turbocharged engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2026 BMW 430I
Engine Parts for Other BMW 430I Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.