2026 BMW M440I Cooling System Parts

Engine:
3.0L L6 Turbocharged

This page lists 7 cooling system parts for the 2026 BMW M440I, across 5 part types, covering the 3.0L L6 Turbocharged engine. Every part shows its brand, manufacturer part number and fitment notes.

The cooling system system on the 2026 BMW M440I keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses. The largest groups are Coolant Reservoir Cap (2 parts), Temperature Sender / Sensor (2 parts) and Coolant / Antifreeze (1 part). The other 2 part types cover the remaining 2 parts.

Coolant / Antifreeze

Brand Part Number Markets Notes Buy
VALVOLINE 904685
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
HT-12 Green1 Gallon
Fitment notes — VALVOLINE 904685
HT-12 Green1 Gallon
M440i Base Model or M440i xDrive Base Model or M440i xDrive Gran Coupe (Type: Concentrated)
View on
Amazon

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator.

Coolant Reservoir

Brand Part Number Markets Notes Buy
REIN EPT0269
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Radiatorwithout Cap
View on
Amazon

This table covers the overflow / expansion tanks that hold extra coolant.

Coolant Reservoir Cap

Brand Part Number Markets Notes Buy
MOTORAD T76
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Standard
Fitment notes — MOTORAD T76
Standard
AuxiliaryRelief Pressure 17 lbs
View on
Amazon
REIN CPE0078
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Intercooler
View on
Amazon

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.

Radiator

Brand Part Number Markets Notes Buy
NISSENS 606784
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Brazed cooling fins
Fitment notes — NISSENS 606784
Brazed cooling fins
CenterAuxiliary
View on
Amazon

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap.

Temperature Sender / Sensor

Brand Part Number Markets Notes Buy
NISSENS 207110
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Location-Cylinder Head
View on
Amazon
WALKER PRODUCTS 2112021
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Sensor Only
Fitment notes — WALKER PRODUCTS 2112021
Sensor Only
M440i xDrive Base Model
View on
Amazon

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender.

Buying Cooling System Parts for a 2026 BMW M440I

On this vehicle, the cooling system system keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses.

  • Confirm you have the 3.0L L6 Turbocharged engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Coolant Reservoir Cap and Temperature Sender / Sensor .

Frequently Asked Questions

How many cooling system parts fit the 2026 BMW M440I?

Our catalog currently lists 7 cooling system parts for the 2026 BMW M440I across 5 subcategories and 5 brands, covering the 3.0L L6 Turbocharged engine. Each part is matched to the engine(s) it fits.

What are the signs of cooling system problems on a 2026 BMW M440I?

Common symptoms include a rising temperature gauge in traffic, sweet-smelling steam, crusty deposits around hose clamps, or a heater that blows cold. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2026 BMW M440I was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2026 BMW M440I?

Every part on this page is matched to the 3.0L L6 Turbocharged engine. Then replace coolant with the exact specification the manufacturer calls for — mixing chemistries can gel and block small passages. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2026 BMW M440I

Cooling System Parts for Other BMW M440I Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.