The 1969 Bristol 411 has 65 engine parts with verified fitment on this page — 22 part types and 11 brands, covering the 6.3L V8 engine. Each part includes a manufacturer part number and application notes.
The engine on the 1969 Bristol 411 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Valve Cover Gasket (7 parts), Connecting Rod Bearing (6 parts) and Crankshaft Seal (6 parts). The other 19 part types cover the remaining 46 parts.
The 1969 Bristol 411 came with a single engine, the 6.3L V8, and every part is verified against it.
11 brands supply engine parts for the 1969 Bristol 411, led by MAHLE / CLEVITE (16 parts), FEL-PRO (13 parts) and VICTOR REINZ (13 parts), plus 8 more brands. Quality grades include High Performance and Standard Replacement.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1969 Bristol 411. 8 parts have it, including KING ENGINE BEARINGS CR806HPND (Connecting Rod Bearing) and FEL-PRO BS40240 (Crankshaft Seal). Each part number opens a page with every vehicle that part fits.
Bolt Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP | 5459701 | 🇺🇸 US 🇨🇦 CA | 12 Point Bolt Head | View on Amazon |
This table covers the Bolt kits.
One part is listed for the 1969 Bristol 411 — ARP 5459701.
Connecting Rod Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Popular | CR806HPND | 🇺🇸 US | alecular (racing line)Set | View on Amazon |
| KING ENGINE BEARINGS | CR806HPNDX | 🇺🇸 US | alecular (racing line)Set | View on Amazon |
| KING ENGINE BEARINGS | CR806XPND | 🇺🇸 US | Race bearings, Trimetal [Pmax Black]Set | View on Amazon |
| KING ENGINE BEARINGS | CR806XPNDX | 🇺🇸 US | Race bearings, Trimetal [Pmax Black]Set | View on Amazon |
| KING ENGINE BEARINGS | CR806XPNDCX | 🇺🇸 US | pmaxkote (racing line), polymer coatedSet | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Popular | CR806AM | 🇺🇸 US | SetBimetal (Aluminum Base) | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
KING ENGINE BEARINGS supplies the 6 Connecting Rod Bearing parts for the 1969 Bristol 411. KING ENGINE BEARINGS CR806HPND carries the "Popular" badge.
In the High Performance grade, KING ENGINE BEARINGS supplies 5 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR806HPND.
The Standard Replacement section lists 1 option from KING ENGINE BEARINGS — built to original-equipment specification. KING ENGINE BEARINGS CR806AM is listed in this group.
Listed part numbers: KING ENGINE BEARINGS CR806HPND, KING ENGINE BEARINGS CR806HPNDX and KING ENGINE BEARINGS CR806XPND, plus the other parts above.
Crankshaft Main Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS | MB555HP | 🇺🇸 US | alecular (racing line)Set | View on Amazon |
| KING ENGINE BEARINGS | MB555HPX | 🇺🇸 US | alecular (racing line)Set | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS | MB555AM | 🇺🇸 US | SetBimetal (Aluminum Base) | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
3 Crankshaft Main Bearing parts for the 1969 Bristol 411 come from KING ENGINE BEARINGS.
The High Performance section: 2 options from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB555HP is listed in this group.
Standard Replacement: 1 part, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB555AM.
Listed part numbers: KING ENGINE BEARINGS MB555HP, KING ENGINE BEARINGS MB555HPX and KING ENGINE BEARINGS MB555AM.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL | 99218 | 🇺🇸 US | Front | View on Amazon |
| WJB / INMOTION PARTS | WS99218 | 🇺🇸 US | Front | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
2 Crankshaft Repair Sleeve parts for the 1969 Bristol 411 come from 2 brands — NATIONAL and WJB / INMOTION PARTS.
Part numbers include NATIONAL 99218 and WJB / INMOTION PARTS WS99218.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | BS40240 | 🇺🇸 US | Rubber | View on Amazon |
| NATIONAL Popular | 3103 | 🇺🇸 US | Front | View on Amazon |
| BCA | NS3103 | 🇺🇸 US | Front | View on Amazon |
| MAHLE / CLEVITE | JV604 | 🇺🇸 US | SetMolded Rubber | View on Amazon |
| SCHAEFFLER | SS3145 | 🇺🇸 US | Front | View on Amazon |
| WJB / INMOTION PARTS | WS3103 | 🇺🇸 US | Front | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
6 Crankshaft Seal parts for the 1969 Bristol 411 come from 6 brands — FEL-PRO, NATIONAL, BCA and 3 other brands. The "Popular" part is FEL-PRO BS40240.
Listed part numbers: FEL-PRO BS40240, NATIONAL 3103 and BCA NS3103, plus the other parts above.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP | 1453606 | 🇺🇸 US 🇨🇦 CA | SetHex Bolt Head | View on Amazon |
| ARP | 4453706 | 🇺🇸 US 🇨🇦 CA | Set12 Point Bolt Head | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
ARP supplies both parts for the 1969 Bristol 411.
Listed part numbers: ARP 1453606 and ARP 4453706.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | 8519PT1 | 🇺🇸 US | Permatorque | View on Amazon |
| MAHLE / CLEVITE | 3464VC | 🇺🇸 US | Graphite | View on Amazon |
| VICTOR REINZ | 611033200 | 🇺🇸 US | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Cylinder Head Gasket parts are listed for the 1969 Bristol 411, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include FEL-PRO 8519PT1, MAHLE / CLEVITE 3464VC and VICTOR REINZ 611033200.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | HS7891PT11 | 🇺🇸 US | Exhaust Manifold Gasket(s) Not IncludedIncludes Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE | HS3464VC | 🇺🇸 US | Includes Valve Stem Seals | View on Amazon |
| VICTOR REINZ | 021032301 | 🇺🇸 US | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Cylinder Head Gasket Set parts are listed for the 1969 Bristol 411, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: FEL-PRO HS7891PT11, MAHLE / CLEVITE HS3464VC and VICTOR REINZ 021032301.
Cylinder Head Spacer Shim
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ | 711638300 | 🇺🇸 US | View on Amazon |
This table covers the Cylinder Head Spacer shims.
One part is listed for the 1969 Bristol 411 — VICTOR REINZ 711638300.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINE PRO | 311010MLS | 🇺🇸 US | 383, 400, 426 Wedge, 440 Engines | View on Amazon |
| FEL-PRO | FS7891PT11 | 🇺🇸 US | Overhaul SetDoes Not Include Intake Manifold Gaskets | View on Amazon |
| MAHLE / CLEVITE | 953344 | 🇺🇸 US | Full Gasket Set | View on Amazon |
| VICTOR REINZ | 011002401 | 🇺🇸 US | Gasket Set | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
4 Engine Kit Gasket Set parts are listed for the 1969 Bristol 411, from ENGINE PRO, FEL-PRO, MAHLE / CLEVITE and 1 other brand.
Part numbers include ENGINE PRO 311010MLS, FEL-PRO FS7891PT11 and MAHLE / CLEVITE 953344, among others listed above.
Harmonic Balancer Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP | 2402501 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Harmonic Balancer bolts.
This group shows a single part: ARP 2402501.
Intake Manifold Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP | 1442001 | 🇺🇸 US 🇨🇦 CA | Hex Bolt Head | View on Amazon |
This table covers the Intake Manifold bolts.
One part is listed for the 1969 Bristol 411 — ARP 1442001.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | MS90175 | 🇺🇸 US | Set | View on Amazon |
| FEL-PRO | MS96007 | 🇺🇸 US | Set | View on Amazon |
| MAHLE / CLEVITE | MS19969 | 🇺🇸 US | Paper | View on Amazon |
| MAHLE / CLEVITE | MS15924 | 🇺🇸 US | Beaded Steel | View on Amazon |
| VICTOR REINZ | 111000501 | 🇺🇸 US | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Intake Manifold Gasket parts are listed for the 1969 Bristol 411, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. FEL-PRO MS90175 carries the "Popular" badge.
Listed part numbers: FEL-PRO MS90175, FEL-PRO MS96007 and MAHLE / CLEVITE MS19969, plus the other parts above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | 70822 | 🇺🇸 US | 0.500 (in) Inside Diameter x 0.900 (in) Outside DiameterFlat Washer | View on Amazon |
| MAHLE / CLEVITE | 2051 | 🇺🇸 US | Composite | View on Amazon |
| VICTOR REINZ | 711346200 | 🇺🇸 US | 0.500 IN Inside Diameter | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Oil Drain Plug Gasket parts are listed for the 1969 Bristol 411, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include FEL-PRO 70822, MAHLE / CLEVITE 2051 and VICTOR REINZ 711346200.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | OS11729C1 | 🇺🇸 US | High Performance engine with Windage tray requires 2 Oil Pan sets1 Piece Design | View on Amazon |
| ENGINE PRO | 317345WT | 🇺🇸 US | Stroker Crankshafts up To 4.150 Inch Stroke | View on Amazon |
| MAHLE / CLEVITE | OS31416 | 🇺🇸 US | Cork-RubberOil Pan Gasket Material: Cork-Rubber | View on Amazon |
| MAHLE / CLEVITE | OS31416TC | 🇺🇸 US | Cork with Metal Carrier | View on Amazon |
| VICTOR REINZ | 101018801 | 🇺🇸 US | Cork Rubber | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Oil Pan Gasket parts for the 1969 Bristol 411 come from 4 brands — MAHLE / CLEVITE, FEL-PRO, ENGINE PRO and 1 other brand. The "Popular" part is FEL-PRO OS11729C1.
Listed part numbers: FEL-PRO OS11729C1, ENGINE PRO 317345WT and MAHLE / CLEVITE OS31416, plus the other parts above.
Oil Pressure Relief Valve Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | 3122 | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ | 711456300 | 🇺🇸 US | View on Amazon |
This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Pressure Relief Valve Gasket parts are listed for the 1969 Bristol 411, from FEL-PRO and VICTOR REINZ.
This group includes FEL-PRO 3122 and VICTOR REINZ 711456300.
Oil Pump Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | B45558 | 🇺🇸 US | Molded Rubber | View on Amazon |
This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 1969 Bristol 411 — MAHLE / CLEVITE B45558.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | TCS124602 | 🇺🇸 US | Water Pump Gasket Included | View on Amazon |
| MAHLE / CLEVITE | T18750 | 🇺🇸 US | Paper | View on Amazon |
| MAHLE / CLEVITE | JV834 | 🇺🇸 US | Set | View on Amazon |
| VICTOR REINZ | 151025001 | 🇺🇸 US | Set | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Timing Cover Gasket parts for the 1969 Bristol 411 come from 3 brands — MAHLE / CLEVITE, FEL-PRO and VICTOR REINZ.
Part numbers include FEL-PRO TCS124602, MAHLE / CLEVITE T18750 and MAHLE / CLEVITE JV834, among others listed above.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | 64573 | 🇺🇸 US | Rubber | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: MAHLE / CLEVITE 64573.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular | VS13379 | 🇺🇸 US | Cork | View on Amazon |
| FEL-PRO Popular | VS50145R | 🇺🇸 US | High Temperature DesignRubber Coated Fiber | View on Amazon |
| MAHLE / CLEVITE | VS38322 | 🇺🇸 US | Cork-RubberSet | View on Amazon |
| MAHLE / CLEVITE | VS38322H | 🇺🇸 US | SetHigh Temperature Cork-Rubber | View on Amazon |
| VICTOR REINZ | 151052101 | 🇺🇸 US | Improved DesignSet | View on Amazon |
| VICTOR REINZ | 151059201 | 🇺🇸 US | Set | View on Amazon |
| VICTOR REINZ | 151052201 | 🇺🇸 US | SetHigh Temperature Design | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
7 Valve Cover Gasket parts for the 1969 Bristol 411 come from 3 brands — VICTOR REINZ, FEL-PRO and MAHLE / CLEVITE. The "Popular" part is FEL-PRO VS13379.
This group includes FEL-PRO VS13379, FEL-PRO VS50145R and MAHLE / CLEVITE VS38322 and the remaining parts above.
Valve Seat
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DURA-BOND | 30682 | 🇺🇸 US | Exhaust | View on Amazon |
This table covers the Valve seats.
One part is listed for the 1969 Bristol 411 — DURA-BOND 30682.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | SS12419 | 🇺🇸 US | Set | View on Amazon |
| MAHLE / CLEVITE | SS45343 | 🇺🇸 US | SetMolded Rubber | View on Amazon |
| VICTOR REINZ | 121007001 | 🇺🇸 US | SetContains 8 Pieces | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Valve Stem Seal parts for the 1969 Bristol 411 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: FEL-PRO SS12419, MAHLE / CLEVITE SS45343 and VICTOR REINZ 121007001.
Buying Engine Parts for a 1969 Bristol 411
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 6.3L V8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Valve Cover Gasket and Connecting Rod Bearing .
Frequently Asked Questions
How many engine parts fit the 1969 Bristol 411?
Our catalog currently lists 65 engine parts for the 1969 Bristol 411 across 22 subcategories and 11 brands, covering the 6.3L V8 engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 1969 Bristol 411?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1969 Bristol 411 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1969 Bristol 411?
Every part on this page is matched to the 6.3L V8 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1969 Bristol 411
Engine Parts for Other Bristol 411 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.