4 Wheel parts are listed for the 2018 Bugatti Chiron, in 3 part types, covering the 8.0L W16 Turbocharged engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2018 Bugatti Chiron, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings. All 4 listed parts are Valve Stem Cap (2 parts), Tire Pressure Monitoring System (TPMS) Sensor (1 part) and Tire Pressure Monitoring System (TPMS) Stem / Service Kit (1 part).
Every part on this page is matched to the 8.0L W16 Turbocharged — the only engine offered in the 2018 Bugatti Chiron.
Every wheel part listed for the 2018 Bugatti Chiron comes from SCHRADER.
Each part number listed for the 2018 Bugatti Chiron opens a page with every vehicle that part fits.
Tire Pressure Monitoring System (TPMS) Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHRADER | 29138 | 🇺🇸 US 🇨🇦 CA | ProgrammedIncludes Mounting Hardware | View on Amazon |
This table covers the TPMS sensors mounted in each wheel. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
This group shows a single part: SCHRADER 29138.
Tire Pressure Monitoring System (TPMS) Stem / Service Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHRADER | 20023 | 🇺🇸 US 🇨🇦 CA | Clamp-In componentsPack of 50 | View on Amazon |
This table covers TPMS valve stems and the service kits used when a tire is changed.
One part is listed for the 2018 Bugatti Chiron — SCHRADER 20023.
Valve Stem Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHRADER | 20395 | 🇺🇸 US 🇨🇦 CA | Green Cap indicates nitrogen filled tiresSnap-In | View on Amazon |
| SCHRADER | 20795 | 🇺🇸 US 🇨🇦 CA | Green Cap indicates nitrogen filled tiresSnap-In | View on Amazon |
This table covers the protective dust caps for TPMS and standard valve stems. Typical signs include a missing cap, a slow TPMS leak, or grit packed in the stem. Use the cap type the notes call for — some TPMS stems need a specific seal under the cap.
2 Valve Stem Cap parts for the 2018 Bugatti Chiron come from SCHRADER.
Listed part numbers: SCHRADER 20395 and SCHRADER 20795.
Buying Wheel Parts for a 2018 Bugatti Chiron
On this vehicle, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings.
- Confirm you have the 8.0L W16 Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Valve Stem Cap and Tire Pressure Monitoring System (TPMS) Sensor .
Frequently Asked Questions
How many wheel parts fit the 2018 Bugatti Chiron?
Our catalog currently lists 4 wheel parts for the 2018 Bugatti Chiron across 3 subcategories and 1 brand, covering the 8.0L W16 Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of wheel problems on a 2018 Bugatti Chiron?
Common symptoms include a TPMS light that will not clear, vibration after a wheel was serviced, or studs damaged by past over-torquing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2018 Bugatti Chiron was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2018 Bugatti Chiron?
Every part on this page is matched to the 8.0L W16 Turbocharged engine. Then always torque lug nuts to spec in a star pattern — impact guns without torque sticks warp rotors and stretch studs. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2018 Bugatti Chiron
Wheel Parts for Other Bugatti Chiron Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.