1991 Buick Century Drivetrain Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

The 1991 Buick Century has 19 drivetrain parts with verified fitment on this page — 5 part types and 10 brands, covering both the 3.1L V6 and the 3.3L V6. Each part includes a manufacturer part number and application notes.

On the 1991 Buick Century, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. Most of the listed parts are CV Axle (10 parts), Differential Pinion Bearing / Race (3 parts) and Transfer Case Low Gear Roller Bearing (3 parts). The other 2 part types cover the remaining 3 parts.

Axle Shaft Seal

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 3.1L V6 24202835
🇺🇸 US 🇨🇦 CA
FrontIn Case
Fitment notes — GM GENUINE 24202835
FrontIn CaseRight-hand Side Axle ShaftGreen
View on
Amazon

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

CV Axle

Economy

Brand Part Number Markets Notes Buy
HERI Popular Fits: 3.1L V6 70281
🇲🇽 MX
Front Left
View on
Amazon
CARDONE Fits: 3.1L V6 601010
🇲🇽 MX
Remanufactured
Fitment notes — CARDONE 601010
Remanufactured
Front Right
View on
Amazon
CARDONE Fits: 3.1L V6 601004
🇲🇽 MX
Remanufactured
Fitment notes — CARDONE 601004
Remanufactured
Front Left
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
TRAKMOTIVE Popular Fits: 3.1L V6 GM8092
🇲🇽 MX
Front Right27 Spline O.B. Joint
View on
Amazon
APWI Fits: 3.1L V6 GM8009
🇲🇽 MX
Front Left
View on
Amazon
CARDONE Fits: 3.1L V6 661094
🇲🇽 MX
Front Right
View on
Amazon
CARDONE Fits: 3.1L V6 661004
🇲🇽 MX
Front Left
View on
Amazon
GSP Fits: 3.1L V6 NCV10027
🇲🇽 MX
Front Leftwith 27 Spline Outboard Joint & Hub
View on
Amazon
TOP NOTCH Fits: 3.1L V6 TN20007
🇲🇽 MX
Front Leftwith 27 Spline Outboard Joint & Hub
View on
Amazon
TRAKMOTIVE Fits: 3.1L V6 GM8076
🇲🇽 MX
Does Not Include ABS Ring
Fitment notes — TRAKMOTIVE GM8076
Does Not Include ABS Ring
Front Left27 Spline O.B. Joint
View on
Amazon

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes.

Differential Pinion Bearing / Race

Brand Part Number Markets Notes Buy
SCHAEFFLER Fits: 3.1L V6 M88010
🇲🇽 MX
Race
Fitment notes — SCHAEFFLER M88010
Race
Front17.462 mm Width68.262 mm Outside Diameter
View on
Amazon
SCHAEFFLER Fits: 3.1L V6 KM802048
🇲🇽 MX
Rear
View on
Amazon
SCHAEFFLER Fits: 3.1L V6 KM88048
🇲🇽 MX
Rear Outer1.313 In Inside Diameter X 2.688 In Outside Diameter X 0.875 In Thick
View on
Amazon

This table covers the bearings and races on the differential pinion.

Differential Seal

Brand Part Number Markets Notes Buy
ATP Fits: 3.1L V6 NO87
🇲🇽 MX
Fits Right
Fitment notes — ATP NO87
Fits:
Right
or:
Left
View on
Amazon
PIONEER Fits: 3.1L V6 759028
🇲🇽 MX
Fits Right
Fitment notes — PIONEER 759028
Fits:
Right
or:
Left
View on
Amazon

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Transfer Case Low Gear Roller Bearing

Brand Part Number Markets Notes Buy
PIONEER Fits: 3.1L V6 764016
🇲🇽 MX
Roller clutchlow
View on
Amazon
PIONEER Fits: 3.1L V6 764012
🇲🇽 MX
Roller Clutch3rd clutch
View on
Amazon
PIONEER Fits: 3.1L V6 764024
🇲🇽 MX
Roller ClutchForward
Fitment notes — PIONEER 764024
Roller ClutchForwardLow & Reverse
View on
Amazon

This table covers the Transfer Case Low Gear Roller bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Buying Drivetrain Parts for a 1991 Buick Century

On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.

  • Match the engine first. Every drivetrain part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: CV Axle and Differential Pinion Bearing / Race .

Frequently Asked Questions

How many drivetrain parts fit the 1991 Buick Century?

Our catalog currently lists 19 drivetrain parts for the 1991 Buick Century across 5 subcategories and 10 brands, covering both the 3.1L V6 and the 3.3L V6. Each part is matched to the engine(s) it fits.

Do drivetrain parts differ between 1991 Buick Century engines?

Yes. Every drivetrain part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of drivetrain problems on a 1991 Buick Century?

Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1991 Buick Century was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1991 Buick Century?

First match the engine — each row shows which engine(s) the part fits. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1991 Buick Century

Drivetrain Parts for Other Buick Century Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.