1992 Buick Riviera Engine Parts

This table covers the Balance Shaft sprockets. Read more

4 Balance Shaft Sprocket parts for the 1992 Buick Riviera come from 4 brands — CLOYES, FVP, INA and 1 other brand.

This group includes CLOYES 2551 and INA ZS2551 and the remaining parts above.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Camshaft Bearing parts for the 1992 Buick Riviera come from 2 brands — DURA-BOND and ENGINETECH. The "Popular" part is DURA-BOND B13.

This group includes DURA-BOND B13, DURA-BOND B13R and DURA-BOND BP13 and the remaining parts above.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: DORMAN 570012.

This table covers the Camshaft Thrust buttons. Read more

4 Camshaft Thrust Button parts for the 1992 Buick Riviera come from PIONEER.

Listed part numbers: PIONEER 500007, PIONEER 500006 and PIONEER 839008, plus the other parts above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

11 Connecting Rod Bearing parts for the 1992 Buick Riviera come from 5 brands — MAHLE / CLEVITE, KING ENGINE BEARINGS, SEALED POWER and 2 other brands. The "Popular" part is ENGINETECH BB624J.

The High Performance section lists 2 options from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR6664XP is listed in this group.

In the Standard Replacement grade, MAHLE / CLEVITE, SEALED POWER, ENGINETECH and 2 other brands supply 9 parts: built to original-equipment specification. A representative part number is ENGINETECH BB624J.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts for the 1992 Buick Riviera come from 3 brands — APEX, FEL-PRO and VICTOR REINZ.

This group includes APEX ACS3055, FEL-PRO CS9644 and VICTOR REINZ 081151401.

This table covers the crankshafts that turn piston motion into rotation. Read more

This group shows a single part: ENGINETECH 103500.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts are listed for the 1992 Buick Riviera, from SEALED POWER, ENGINETECH, GM GENUINE and 1 other brand. SEALED POWER 7144MA carries the "Popular" badge.

High Performance: 1 part, from SEALED POWER. A representative part number is SEALED POWER 107M.

The Standard Replacement section: 4 options from SEALED POWER, ENGINETECH, GM GENUINE and 1 other brand. SEALED POWER 7144MA is listed in this group.

Part numbers include SEALED POWER 7144MA, SEALED POWER 107M and ENGINETECH BC450J, among others listed above.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

This group shows a single part: GM GENUINE 24503056.

This table covers the wear sleeves used to restore a Crankshaft Main Bearing seal surface. Read more

This group shows a single part: VICTOR REINZ 711348200.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts are listed for the 1992 Buick Riviera, from TIMKEN, WJB / INMOTION PARTS, FEL-PRO and 2 other brands. TIMKEN KWK99193 carries the "Popular" badge.

This group includes TIMKEN KWK99193, WJB / INMOTION PARTS WS99193 and FEL-PRO 16276 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

20 Crankshaft Seal parts are listed for the 1992 Buick Riviera, from WJB / INMOTION PARTS, FEL-PRO, GM GENUINE and 9 other brands. FEL-PRO BS40649 carries the "Popular" badge.

This table covers the Cylinder Head Alignment Dowel pins. Read more

3 Cylinder Head Alignment Dowel Pin parts for the 1992 Buick Riviera come from PIONEER.

Part numbers include PIONEER S1110, PIONEER PG225 and PIONEER PG651.

This table covers the bolts that clamp the cylinder head to the block. Read more

6 Cylinder Head Bolt parts for the 1992 Buick Riviera come from 4 brands — PIONEER, APEX, GM GENUINE and 1 other brand. The "Popular" part is APEX AHB353.

Listed part numbers: APEX AHB353, GM GENUINE 88891770 and MAHLE / CLEVITE GS33233, plus the other parts above.

This table covers the Cylinder Head Bolt washers. Read more

This group shows a single part: PIONEER S1018.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts for the 1992 Buick Riviera come from 4 brands — APEX, CORTECO, FEL-PRO and 1 other brand.

Part numbers include APEX AHG353, CORTECO 20686GR and FEL-PRO 9644PT, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Cylinder Head Gasket Set parts for the 1992 Buick Riviera come from 5 brands — ENGINETECH, APEX, FEL-PRO and 2 other brands. The "Popular" part is APEX AHS3056.

Part numbers include APEX AHS3056, FEL-PRO HS9644PT1 and ENGINETECH B38HSG, among others listed above.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

DORMAN supplies the 3 Cylinder Head Plug parts for the 1992 Buick Riviera.

Listed part numbers: DORMAN 565019, DORMAN 570006 and DORMAN 116203.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

4 Cylinder Repair Sleeve parts for the 1992 Buick Riviera come from 2 brands — MELLING and ENGINETECH.

This group includes ENGINETECH ESL1101, MELLING CSL138 and MELLING CSL138X and the remaining parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts are listed for the 1992 Buick Riviera, from KAT'S HEATERS and TEMRO.

Listed part numbers: KAT'S HEATERS 11416 and TEMRO 3100041.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts for the 1992 Buick Riviera come from 2 brands — ENGINETECH and MAHLE / CLEVITE.

Part numbers include ENGINETECH B38C81 and MAHLE / CLEVITE 953164.

This table covers the Engine rebuild kits. Read more

This group shows a single part: ENGINETECH RCB3800BP.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts are listed for the 1992 Buick Riviera, from ENGINETECH, QUALCAST and SBI.

Part numbers include ENGINETECH V2317, QUALCAST 101710 and SBI 01710.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

13 Expansion Plug parts for the 1992 Buick Riviera come from 4 brands — DORMAN, PIONEER, ENGINETECH and 1 other brand. The "Popular" part is DORMAN 555077.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts for the 1992 Buick Riviera come from 4 brands — DAYCO, PIONEER, ATP and 1 other brand. The "Popular" part is DAYCO PB1083N.

The High Performance section: 1 option from DAYCO. DAYCO PBO81083SS5 is listed in this group.

Standard Replacement: 5 parts, from PIONEER, DAYCO, ATP and 1 other brand. A representative part number is DAYCO PB1083N.

This group includes DAYCO PB1083N, DAYCO PBO81083SS5 and ATP 102072 and the remaining parts above.

This table covers the Harmonic Balancer bolts. Read more

One part is listed for the 1992 Buick Riviera — GM GENUINE 24504736.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

One part is listed for the 1992 Buick Riviera — PIONEER HB4121.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Manifold Gasket parts for the 1992 Buick Riviera come from 4 brands — APEX, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Part numbers include APEX AMS3561, FEL-PRO MS949181 and MAHLE / CLEVITE MS16202, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts are listed for the 1992 Buick Riviera, from ENGINETECH, QUALCAST and SBI.

Part numbers include ENGINETECH V2274, QUALCAST 101711 and SBI 01711.

This table covers the assorted fasteners and small hardware listed for this system. Read more

One part is listed for the 1992 Buick Riviera — ACDELCO 2456908.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

20 Oil parts are listed for the 1992 Buick Riviera, from MOBIL, VALVOLINE and IDEMITSU. MOBIL 125195 carries the "Popular" badge.

In the Conventional grade, VALVOLINE supplies 2 parts: grouped under the catalog's "Conventional" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE 797578.

In the Full Synthetic grade, MOBIL and VALVOLINE supply 7 parts: full-synthetic oils. A representative part number is MOBIL 125195.

The High Mileage (>75,000 Miles) section lists 8 options from MOBIL and VALVOLINE — oils grouped for high-mileage engines. MOBIL 125201 is listed in this group.

In the Racing grade, IDEMITSU supplies 1 part: grouped under the catalog's "Racing" designation — the notes column spells out what sets them apart. A representative part number is IDEMITSU 30018100750.

In the Synthetic Blend grade, MOBIL supplies 2 parts: synthetic-blend oils. A representative part number is MOBIL 124406.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 1992 Buick Riviera come from HAYDEN.

This group includes HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

9 Oil Drain Plug parts are listed for the 1992 Buick Riviera, from DORMAN, AGS, ELRING and 1 other brand. AGS ODP00016 carries the "Popular" badge.

Part numbers include AGS ODP00016, DORMAN 090052 and DORMAN 090031, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Oil Drain Plug Gasket parts for the 1992 Buick Riviera come from 8 brands — DORMAN, ULTRA-POWER, MAHLE / CLEVITE and 5 other brands. The "Popular" part is MAHLE / CLEVITE 2051.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts are listed for the 1992 Buick Riviera, from GATES, MOTORAD and SKP.

Part numbers include GATES 31103, MOTORAD MO99 and SKP SKMO99.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Filler Cap Gasket parts for the 1992 Buick Riviera come from 3 brands — ELRING, FEL-PRO and GM GENUINE.

Listed part numbers: ELRING 823620, ELRING 592250 and FEL-PRO 73193, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts are listed for the 1992 Buick Riviera, from BOSCH, CHAMP / LUBER-FINER, FRAM and 9 other brands. BOSCH 72132WS carries the "Popular" badge.

In the Economy grade, BOSCH, CHAMP / LUBER-FINER, FRAM and 3 other brands supply 6 parts: the catalog's value-priced group. A representative part number is BOSCH 72132WS.

In the High Performance / Heavy Duty grade, ACDELCO, FRAM, MOBIL and 1 other brand supply 4 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO UPF47R.

The Standard Replacement section: 8 options from ACDELCO, WIX, BOSCH and 5 other brands. ACDELCO PF47E is listed in this group.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

2 Oil Filter Adapter Gasket / O-Ring parts for the 1992 Buick Riviera come from 2 brands — GM GENUINE and MAHLE / CLEVITE.

This group includes GM GENUINE 25534742 and MAHLE / CLEVITE B31639.

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Filter Gasket parts for the 1992 Buick Riviera come from 3 brands — APEX, FEL-PRO and VICTOR REINZ.

Listed part numbers: APEX AOM6003, FEL-PRO 70644 and VICTOR REINZ 711350600.

This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

5 Oil Level Sensor parts are listed for the 1992 Buick Riviera, from GM GENUINE, ACDELCO, STANDARD MOTOR PRODUCTS and 1 other brand. ACDELCO D8055 carries the "Popular" badge.

Part numbers include ACDELCO D8055, GM GENUINE 12603782 and GM GENUINE 12603784, among others listed above.

This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 1992 Buick Riviera — GM GENUINE 10151633.

This table covers the oil pans that hold the engine's oil sump. Read more

2 Oil Pan parts for the 1992 Buick Riviera come from 2 brands — ATP and PIONEER.

Part numbers include ATP 103107 and PIONEER 501111.

This table covers the Oil Pan bolts. Read more

2 Oil Pan Bolt parts are listed for the 1992 Buick Riviera, from GM GENUINE and PIONEER.

This group includes GM GENUINE 9440224 and PIONEER 854006.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts are listed for the 1992 Buick Riviera, from FEL-PRO, APEX, MAHLE / CLEVITE and 1 other brand. FEL-PRO OS30522R carries the "Popular" badge.

Part numbers include FEL-PRO OS30522R, APEX AOP353 and FEL-PRO OS30522T, among others listed above.

This table covers the pickup tubes and screens that feed the oil pump. Read more

3 Oil Pump Pickup Tube / Screen parts for the 1992 Buick Riviera come from 3 brands — ENGINETECH, MELLING and SEALED POWER.

Part numbers include ENGINETECH S256S, MELLING 256S and SEALED POWER 22414280.

This table covers the Oil Pump repair kits. Read more

2 Oil Pump Repair Kit parts for the 1992 Buick Riviera come from 2 brands — ENGINETECH and MELLING.

Part numbers include ENGINETECH EK135 and MELLING K135.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

3 Piston parts for the 1992 Buick Riviera come from 2 brands — ENGINETECH and SEALED POWER.

Listed part numbers: ENGINETECH P1581, ENGINETECH K15816P and SEALED POWER H558P.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts for the 1992 Buick Riviera come from 3 brands — HASTINGS MANUFACTURING, ENGINETECH and MAHLE / CLEVITE. The "Popular" part is ENGINETECH M96136.

In the Premium grade, HASTINGS MANUFACTURING, ENGINETECH and MAHLE / CLEVITE supply 4 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is ENGINETECH M96136.

Standard Replacement: 1 part, from HASTINGS MANUFACTURING. A representative part number is HASTINGS MANUFACTURING 4458.

Listed part numbers: ENGINETECH M96136, HASTINGS MANUFACTURING 2M4458S and HASTINGS MANUFACTURING 2M4458, plus the other parts above.

This table covers the pushrods that transfer lifter motion to the rocker arms. Read more

3 Push Rod parts for the 1992 Buick Riviera come from 3 brands — ENGINETECH, MELLING and SBI.

This group includes ENGINETECH EPR384, MELLING MPR384 and SBI 1921491.

This table covers the Re-Ring kits. Read more

One part is listed for the 1992 Buick Riviera — ENGINETECH RMB3800BP.

This table covers the pivots each rocker arm sits on. Read more

One part is listed for the 1992 Buick Riviera — SEALED POWER MR1886.

This table covers the Timing Cam sprockets. Read more

4 Timing Cam Sprocket parts are listed for the 1992 Buick Riviera, from CLOYES, FVP, INA and 1 other brand.

This group includes CLOYES S716T and INA ZSS716T and the remaining parts above.

This table covers the timing chains that keep the cams in time with the crank. Read more

4 Timing Chain parts for the 1992 Buick Riviera come from 4 brands — CLOYES, FVP, INA and 1 other brand.

Part numbers include CLOYES C375 and INA ZCC381, among others listed above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

6 Timing Chain & Component Kit parts are listed for the 1992 Buick Riviera, from S.A. GEAR, SEALED POWER, CLOYES and 3 other brands. CLOYES C3071 carries the "Popular" badge.

Economy: 2 parts, from S.A. GEAR and SEALED POWER. A representative part number is S.A. GEAR 73088.

The Standard Replacement section: 4 options from CLOYES, MELLING, ENGINETECH and 1 other brand. CLOYES C3071 is listed in this group.

Listed part numbers: CLOYES C3071, S.A. GEAR 73088 and SEALED POWER KT3381S, plus the other parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

7 Timing Chain Guide / Damper parts for the 1992 Buick Riviera come from 5 brands — S.A. GEAR, INA, MELLING and 2 other brands. The "Popular" part is MELLING BD58.

Part numbers include MELLING BD58, S.A. GEAR 7175 and CLOYES 95175, among others listed above.