1994 Buick Skylark Engine Parts

This table covers the camshafts that open the valves. Read more

3 Camshaft parts are listed for the 1994 Buick Skylark, from ENGINETECH and SKP.

Listed part numbers: ENGINETECH ES1539, ENGINETECH ES1569 and SKP SKES1569.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Camshaft Bearing parts are listed for the 1994 Buick Skylark, from ENGINETECH, DURA-BOND, MAHLE / CLEVITE and 2 other brands. ENGINETECH CC404B carries the "Popular" badge.

Listed part numbers: ENGINETECH CC404B, MAHLE / CLEVITE SH1364S and DURA-BOND CH18, plus the other parts above.

This table covers the Camshaft Dowel pins. Read more

One part is listed for the 1994 Buick Skylark — GM GENUINE 24575061.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

This group shows a single part: BCA NS99139.

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 1994 Buick Skylark — ENGINETECH ECR305.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Connecting Rod Bearing parts are listed for the 1994 Buick Skylark, from MAHLE / CLEVITE, SEALED POWER, ENGINETECH and 2 other brands. ENGINETECH BB285J carries the "Popular" badge.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Conversion / Lower Gasket Set parts are listed for the 1994 Buick Skylark, from ENGINETECH, FEL-PRO, AJUSA and 6 other brands. ENGINETECH C189CSA carries the "Popular" badge.

Part numbers include ENGINETECH C189CSA, FEL-PRO CS9957 and AJUSA 54115900, among others listed above.

This table covers the crankshafts that turn piston motion into rotation. Read more

One part is listed for the 1994 Buick Skylark — ENGINETECH 128000.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts for the 1994 Buick Skylark come from 5 brands — SEALED POWER, ENGINETECH, MAHLE / CLEVITE and 2 other brands. The "Popular" part is ENGINETECH BC412J.

Listed part numbers: ENGINETECH BC412J, MAHLE / CLEVITE MS2273A and ITM ENGINE COMPONENTS 4M9242, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

10 Crankshaft Repair Sleeve parts for the 1994 Buick Skylark come from 6 brands — NATIONAL, TIMKEN, SCHAEFFLER and 3 other brands. The "Popular" part is NATIONAL 99176.

This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

2 Crankshaft Repair Sleeve Tool parts for the 1994 Buick Skylark come from 2 brands — FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO 16304 and VICTOR REINZ 711620500.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

23 Crankshaft Seal parts for the 1994 Buick Skylark come from 11 brands — NATIONAL, TIMKEN, BCA and 8 other brands. The "Popular" part is FEL-PRO BS40464.

This table covers the Cylinder Head Alignment Dowel pins. Read more

2 Cylinder Head Alignment Dowel Pin parts are listed for the 1994 Buick Skylark, from GM GENUINE and PIONEER.

This group includes GM GENUINE 14024244 and PIONEER PG651.

This table covers the bolts that clamp the cylinder head to the block. Read more

6 Cylinder Head Bolt parts are listed for the 1994 Buick Skylark, from FEL-PRO, MAHLE / CLEVITE, AJUSA and 3 other brands. FEL-PRO ES74019 carries the "Popular" badge.

This group includes FEL-PRO ES74019, MAHLE / CLEVITE GS33398 and AJUSA 81051400 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Cylinder Head Gasket parts are listed for the 1994 Buick Skylark, from FEL-PRO, VICTOR REINZ, ENGINETECH and 5 other brands. ENGINETECH HC189A carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Cylinder Head Gasket Set parts are listed for the 1994 Buick Skylark, from ENGINETECH, FEL-PRO, VICTOR REINZ and 3 other brands. ENGINETECH C189HSB carries the "Popular" badge.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts are listed for the 1994 Buick Skylark, from ENGINETECH and SBI.

Part numbers include ENGINETECH CHS1011 and SBI 2302025.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

MELLING supplies both parts for the 1994 Buick Skylark.

Listed part numbers: MELLING CSL141 and MELLING CSL241.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11415.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts are listed for the 1994 Buick Skylark, from ENGINETECH, AJUSA, APEX and 1 other brand. ENGINETECH C3164 carries the "Popular" badge.

Part numbers include ENGINETECH C3164, AJUSA 50247600 and APEX AFS3050, among others listed above.

This table covers the Engine rebuild kits. Read more

ENGINETECH supplies the 8 Engine Rebuild Kit parts for the 1994 Buick Skylark. ENGINETECH RCC189E carries the "Popular" badge.

This group includes ENGINETECH RCC189E, ENGINETECH RCC189EP and ENGINETECH MKC189E and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Exhaust Valve parts for the 1994 Buick Skylark come from 4 brands — ENGINETECH, MELLING, QUALCAST and 1 other brand. The "Popular" part is ENGINETECH V2143.

This group includes ENGINETECH V2143, MELLING V1811 and ENGINETECH V2141 and the remaining parts above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

9 Expansion Plug parts are listed for the 1994 Buick Skylark, from PIONEER, ENGINETECH, MELLING and 1 other brand. ENGINETECH PK71 carries the "Popular" badge.

This group includes ENGINETECH PK71, MELLING MPE176BR and ENGINETECH PK71B and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

7 Harmonic Balancer parts are listed for the 1994 Buick Skylark, from SKP, AUTOTECNICA, DORMAN and 4 other brands. AUTOTECNICA CE1413074 carries the "Popular" badge.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594148.

The Standard Replacement section lists 6 options from AUTOTECNICA, DORMAN, ATP and 3 other brands — built to original-equipment specification. AUTOTECNICA CE1413074 is listed in this group.

Listed part numbers: AUTOTECNICA CE1413074, SKP SK594148 and DORMAN 594148, plus the other parts above.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

5 Harmonic Balancer Repair Sleeve parts for the 1994 Buick Skylark come from 4 brands — NATIONAL, BCA, ENGINETECH and 1 other brand. The "Popular" part is NATIONAL 88176.

Listed part numbers: NATIONAL 88176, BCA NS5000 and ENGINETECH HS228, plus the other parts above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

This group shows a single part: DORMAN 615299.

This table covers the Intake Manifold bolts. Read more

6 Intake Manifold Bolt parts are listed for the 1994 Buick Skylark, from FEL-PRO, APEX, DORMAN and 2 other brands. FEL-PRO ES72225 carries the "Popular" badge.

This group includes FEL-PRO ES72225, FEL-PRO ES72226 and APEX AES310 and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

13 Intake Manifold Gasket parts are listed for the 1994 Buick Skylark, from MAHLE / CLEVITE, ENGINETECH, FEL-PRO and 3 other brands. FEL-PRO MS98004T carries the "Popular" badge.

The Premium section lists 2 options from FEL-PRO and VICTOR REINZ — a step above OE specification in materials, tolerances or warranty terms. FEL-PRO MS98004T is listed in this group.

The Standard Replacement section: 11 options from MAHLE / CLEVITE, ENGINETECH, APEX and 3 other brands. FEL-PRO MS95536 is listed in this group.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Plenum Gasket parts for the 1994 Buick Skylark come from 5 brands — FEL-PRO, APEX, GM GENUINE and 2 other brands. The "Popular" part is FEL-PRO MS91481.

This group includes FEL-PRO MS91481, APEX AMS3500 and GM GENUINE 12480824 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Intake Valve parts for the 1994 Buick Skylark come from 3 brands — ENGINETECH, QUALCAST and SBI.

This group includes ENGINETECH V2140, ENGINETECH V2138 and QUALCAST 101810 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Motor Mount parts for the 1994 Buick Skylark come from 2 brands — ANCHOR and WESTAR.

The Economy section: 1 option from ANCHOR. ANCHOR 2803SR is listed in this group.

Standard Replacement: 3 parts, from WESTAR and ANCHOR. A representative part number is ANCHOR 2803.

Listed part numbers: ANCHOR 2803SR, ANCHOR 2803 and WESTAR EM2803, plus the other parts above.

This table covers the Motor Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

5 Motor Mount Bushing parts for the 1994 Buick Skylark come from 2 brands — DEA / MARMON RIDE CONTROL and PIONEER. The "Popular" part is DEA / MARMON RIDE CONTROL A2803HY.

This group includes DEA / MARMON RIDE CONTROL A2803HY, DEA / MARMON RIDE CONTROL A2803 and DEA / MARMON RIDE CONTROL AM217 and the remaining parts above.

This table covers the Motor Mount inserts. Read more

One part is listed for the 1994 Buick Skylark — SKP SKM2803.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 301285.

This table covers the O-rings that seal this joint. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: VICTOR REINZ 411041900.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

20 Oil parts for the 1994 Buick Skylark come from 3 brands — MOBIL, VALVOLINE and IDEMITSU. The "Popular" part is MOBIL 125195.

The Full Synthetic section lists 7 options from MOBIL and VALVOLINE — full-synthetic oils. MOBIL 125195 is listed in this group.

In the High Mileage (>75,000 Miles) grade, VALVOLINE and MOBIL supply 8 parts: oils grouped for high-mileage engines. A representative part number is VALVOLINE VV1556.

The Racing section lists 1 option from IDEMITSU — grouped under the catalog's "Racing" designation — the notes column spells out what sets them apart. IDEMITSU 30018100750 is listed in this group.

The Synthetic Blend section lists 4 options from MOBIL and VALVOLINE — synthetic-blend oils. MOBIL 124406 is listed in this group.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 1994 Buick Skylark.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

2 Oil Dipstick / Tube parts for the 1994 Buick Skylark come from DORMAN.

This group includes DORMAN 917380 and DORMAN 917385.

This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Oil Dipstick / Tube Seal parts are listed for the 1994 Buick Skylark, from ELRING and FEL-PRO.

Listed part numbers: ELRING 584210 and FEL-PRO 73889.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts for the 1994 Buick Skylark come from 6 brands — DORMAN, GM GENUINE, AGS and 3 other brands. The "Popular" part is DORMAN 090034.

This group includes DORMAN 090034, GM GENUINE 11562588 and AGS ODP00009 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Oil Drain Plug Gasket parts are listed for the 1994 Buick Skylark, from DORMAN, FEL-PRO, ELRING and 4 other brands. DORMAN 097119 carries the "Popular" badge.

This group includes DORMAN 097119, FEL-PRO 70820 and DORMAN 97119 and the remaining parts above.