This page lists 18 drivetrain parts for the 1995 Buick Regal, across 7 part types, covering both the 3.1L V6 and the 3.8L V6. Every part shows its brand, manufacturer part number and fitment notes.
On the 1995 Buick Regal, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. Most of the listed parts are CV Axle (6 parts), CV Joint Boot (5 parts) and Differential Seal (2 parts). The other 4 part types cover the remaining 5 parts.
The 1995 Buick Regal was sold with both the 3.1L V6 and the 3.8L V6. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 1995 Buick Regal drivetrain parts are PIONEER (3 parts), GM GENUINE (2 parts) and TRAKMOTIVE (2 parts), plus 8 more brands. Quality grades include Standard Replacement and Economy.
3 parts on this 1995 Buick Regal page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including TOP NOTCH TN20054 (CV Axle) and DORMAN 614003 (CV Joint Boot). Click any part number to see every vehicle that part fits.
Axle Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.8L V6 | 24202835 | 🇺🇸 US 🇨🇦 CA | Front RightIn Case | View on Amazon |
This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: GM GENUINE 24202835.
CV Axle
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CARDONE Fits: 3.8L V6 | 601264 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RemanufacturedPackage Contents: Complete Axle | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TOP NOTCH Popular Fits: 3.8L V6 | TN20054 | 🇺🇸 US 🇨🇦 CA | Front LeftLimited | View on Amazon |
| TRAKMOTIVE Popular Fits: 3.8L V6 | GM8036 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right | View on Amazon |
| GSP Fits: 3.8L V6 | NCV10537 | 🇺🇸 US 🇨🇦 CA | Extended Length: 22.72 In | View on Amazon |
| GSP Fits: 3.8L V6 | NCV10542 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right | View on Amazon |
| TRAKMOTIVE Fits: 3.8L V6 | GM8035 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left | View on Amazon |
This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes.
6 CV Axle parts for the 1995 Buick Regal come from 4 brands — TRAKMOTIVE, GSP, CARDONE and 1 other brand. The "Popular" part is TOP NOTCH TN20054.
The Economy section lists 1 option from CARDONE — the catalog's value-priced group. CARDONE 601264 is listed in this group.
In the Standard Replacement grade, TRAKMOTIVE, GSP and TOP NOTCH supply 5 parts: built to original-equipment specification. A representative part number is TOP NOTCH TN20054.
This group includes TOP NOTCH TN20054, CARDONE 601264 and TRAKMOTIVE GM8036 and the remaining parts above.
CV Joint Boot
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.8L V6 | 614003 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OuterJoint Diameter 3.44" | View on Amazon |
| DORMAN Fits: 3.8L V6 | 614004 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | InnerJoint Diameter 3.50" | View on Amazon |
| MEVOTECH Fits: 3.8L V6 | DX508 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Inner | View on Amazon |
| MEVOTECH Fits: 3.8L V6 | DX524 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Outer | View on Amazon |
| MOOG Fits: 3.8L V6 | 5463 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Outerwith Hard Thermoplastic Boots | View on Amazon |
This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn.
5 CV Joint Boot parts for the 1995 Buick Regal come from 3 brands — DORMAN, MEVOTECH and MOOG. The "Popular" part is DORMAN 614003.
Part numbers include DORMAN 614003, DORMAN 614004 and MEVOTECH DX508, among others listed above.
CV Joint Boot Band
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.8L V6 | 364038 | 🇺🇸 US 🇨🇦 CA | Front Outboard OuterLarge Clamp | View on Amazon |
This table covers the bands that clamp a CV boot to the joint.
One part is listed for the 1995 Buick Regal — GM GENUINE 364038.
Differential Pinion Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Fits: 3.8L V6 | 99193 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
This table covers the wear sleeves used to restore a grooved pinion seal surface.
This group shows a single part: NATIONAL 99193.
Differential Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP Fits: 3.8L V6 | NO87 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| PIONEER Fits: 3.8L V6 | 759028 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Differential Seal parts are listed for the 1995 Buick Regal, from ATP and PIONEER.
This group includes ATP NO87 and PIONEER 759028.
Transfer Case Low Gear Roller Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PIONEER Fits: 3.8L V6 | 764012 | 🇺🇸 US 🇨🇦 CA | Roller Clutch3rd clutch | View on Amazon |
| PIONEER Fits: 3.8L V6 | 764024 | 🇺🇸 US 🇨🇦 CA | Roller ClutchForward | View on Amazon |
This table covers the Transfer Case Low Gear Roller bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
PIONEER supplies both parts for the 1995 Buick Regal.
Listed part numbers: PIONEER 764012 and PIONEER 764024.
Buying Drivetrain Parts for a 1995 Buick Regal
On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.
- Match the engine first. Every drivetrain part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: CV Axle and CV Joint Boot .
Frequently Asked Questions
How many drivetrain parts fit the 1995 Buick Regal?
Our catalog currently lists 18 drivetrain parts for the 1995 Buick Regal across 7 subcategories and 11 brands, covering both the 3.1L V6 and the 3.8L V6. Each part is matched to the engine(s) it fits.
Do drivetrain parts differ between 1995 Buick Regal engines?
Yes. Every drivetrain part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of drivetrain problems on a 1995 Buick Regal?
Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1995 Buick Regal was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1995 Buick Regal?
First match the engine — each row shows which engine(s) the part fits. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1995 Buick Regal
Drivetrain Parts for Other Buick Regal Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.