2004 Buick Rendezvous Drivetrain Parts

This table covers the Axle Shaft Lock / Snap rings. Read more

One part is listed for the 2004 Buick Rendezvous — GM GENUINE 24205145.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Axle Shaft Seal parts for the 2004 Buick Rendezvous come from 3 brands — GM GENUINE, NATIONAL and WJB / INMOTION PARTS. Every part fits both the 3.4L V6 and the 3.6L V6.

This group includes GM GENUINE 24202835, NATIONAL 711082 and WJB / INMOTION PARTS WS711082.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

32 CV Axle parts for the 2004 Buick Rendezvous come from 8 brands — CARDONE, TRAKMOTIVE, GSP and 5 other brands. The "Popular" part is HERI 70275. They are grouped as Economy and Standard Replacement, with Standard Replacement the largest group at 18 parts from CARDONE, TRAKMOTIVE, GSP and 2 other brands.

This table covers the constant-velocity joints at each end of a drive axle. Read more

2 CV Joint parts for the 2004 Buick Rendezvous come from DANA. 1 part fits every engine; the other 1 is engine-specific.

This group includes DANA 2510140086 and DANA 2510140068.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

5 CV Joint Boot parts for the 2004 Buick Rendezvous come from 2 brands — DORMAN and MEVOTECH. The "Popular" part is DORMAN 614003. 3 parts fit every engine; the other 2 are engine-specific.

This group includes DORMAN 614003, DORMAN 614004 and DORMAN 614700 and the remaining parts above.

This table covers the bands that clamp a CV boot to the joint. Read more

GM GENUINE supplies both parts for the 2004 Buick Rendezvous.

This group includes GM GENUINE 88897260 and GM GENUINE 364038.

This table covers the CV Joint Lock rings. Read more

One part is listed for the 2004 Buick Rendezvous — GM GENUINE 24205145.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

3 Differential Pinion Repair Sleeve parts for the 2004 Buick Rendezvous come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. Every part fits both the 3.4L V6 and the 3.6L V6.

This group includes BCA NS99189, NATIONAL 99189 and WJB / INMOTION PARTS WS99189.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Differential Pinion Seal parts for the 2004 Buick Rendezvous come from 3 brands — NATIONAL, SKF and WJB / INMOTION PARTS. Every part fits both the 3.4L V6 and the 3.6L V6.

Part numbers include NATIONAL 711083, SKF BR14274 and WJB / INMOTION PARTS WS711083.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

2 Drive Shaft parts are listed for the 2004 Buick Rendezvous, from DORMAN and WJB / INMOTION PARTS. All of them fit every engine offered in the 2004 Rendezvous.

Part numbers include DORMAN 946033 and WJB / INMOTION PARTS WDS46033.

This table covers the wear sleeves used to restore a Transfer Case Extension Housing seal surface. Read more

3 Transfer Case Extension Housing Repair Sleeve parts are listed for the 2004 Buick Rendezvous, from BCA, NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2004 Rendezvous.

Part numbers include BCA NS99157, NATIONAL 99157 and WJB / INMOTION PARTS WS99157.

This table covers the seals at the Transfer Case Housing Extension. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Transfer Case Housing Extension Seal parts are listed for the 2004 Buick Rendezvous, from NATIONAL, TIMKEN and WJB / INMOTION PARTS. All of them fit every engine offered in the 2004 Rendezvous.

Part numbers include NATIONAL 710678 and WJB / INMOTION PARTS WS710678, among others listed above.

This table covers the Transfer Case Idler Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Transfer Case Idler Shaft Bearing parts for the 2004 Buick Rendezvous come from 3 brands — NATIONAL, WJB / INMOTION PARTS and BCA. Every part fits both the 3.4L V6 and the 3.6L V6.

The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WTA18 is listed in this group.

In the Standard Replacement grade, NATIONAL and BCA supply 3 parts: built to original-equipment specification. A representative part number is BCA NBA18.

Part numbers include WJB / INMOTION PARTS WTA18, BCA NBA18 and NATIONAL JL69310, among others listed above.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Transfer Case Input Shaft Bearing parts for the 2004 Buick Rendezvous come from 6 brands — WJB / INMOTION PARTS, TIMKEN, BCA and 3 other brands. The "Popular" part is TIMKEN LM503310. Every part fits both the 3.4L V6 and the 3.6L V6.

The Economy section: 2 options from WJB / INMOTION PARTS. WJB / INMOTION PARTS WTLM503310 is listed in this group.

Standard Replacement: 6 parts, from TIMKEN, BCA, NATIONAL and 1 other brand. A representative part number is TIMKEN LM503310.

1 further part sits outside the graded sections, with the same engine-level match.

Part numbers include TIMKEN LM503310, WJB / INMOTION PARTS WTLM503310 and WJB / INMOTION PARTS WTLM503349A, among others listed above.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

5 Transfer Case Input Shaft Repair Sleeve parts are listed for the 2004 Buick Rendezvous, from NATIONAL, BCA, SCHAEFFLER and 2 other brands. NATIONAL 99139 carries the "Popular" badge. All of them fit every engine offered in the 2004 Rendezvous.

Listed part numbers: NATIONAL 99139, BCA NS99139 and SCHAEFFLER SS3480, plus the other parts above.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Input Shaft Seal parts are listed for the 2004 Buick Rendezvous, from SKF and WJB / INMOTION PARTS. All of them fit every engine offered in the 2004 Rendezvous.

Listed part numbers: SKF 15787 and WJB / INMOTION PARTS WS710656.

This table covers the Transfer Case Low Gear Roller bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

PIONEER supplies both parts for the 2004 Buick Rendezvous.

Part numbers include PIONEER 764012 and PIONEER 764024.

This table covers the Transfer Case Main Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Transfer Case Main Shaft Bearing parts are listed for the 2004 Buick Rendezvous, from SCHAEFFLER and SKF. All of them fit every engine offered in the 2004 Rendezvous.

Listed part numbers: SCHAEFFLER 32006X and SKF BR32006.

This table covers the Transfer Case Main Shaft Thrust bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2004 Buick Rendezvous — TIMKEN 32006.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Transfer Case Output Shaft Bearing parts are listed for the 2004 Buick Rendezvous, from WJB / INMOTION PARTS, NATIONAL, BCA and 2 other brands. NATIONAL 32006 carries the "Popular" badge.

Economy: 1 part, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WT32006.

The Standard Replacement section: 4 options from NATIONAL, BCA, SKF and 1 other brand. NATIONAL 32006 is listed in this group.

Listed part numbers: NATIONAL 32006, WJB / INMOTION PARTS WT32006 and BCA NB32006, plus the other parts above.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

3 Transfer Case Output Shaft Repair Sleeve parts for the 2004 Buick Rendezvous come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS99157, NATIONAL 99157 and WJB / INMOTION PARTS WS99157.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Transfer Case Output Shaft Seal parts for the 2004 Buick Rendezvous come from 5 brands — SCHAEFFLER, SKF, NATIONAL and 2 other brands. The "Popular" part is NATIONAL 710677.

This group includes NATIONAL 710677, WJB / INMOTION PARTS WS710677 and SCHAEFFLER SS2635 and the remaining parts above.