2005 Buick Park Avenue Engine Parts

This table covers the Balance Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2005 Buick Park Avenue — MAHLE / CLEVITE SH1798S.

This table covers the Balance Shaft sprockets. Read more

5 Balance Shaft Sprocket parts for the 2005 Buick Park Avenue come from 3 brands — INA, CLOYES and S.A. GEAR. The "Popular" part is INA ZS2551. Every part fits both the 3.8L V6 and the 3.8L V6 Supercharged.

Part numbers include INA ZS2551, CLOYES 2551 and CLOYES 2558, among others listed above.

This table covers the camshafts that open the valves. Read more

This group shows a single part: ENGINETECH ES1541.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Camshaft Bearing parts for the 2005 Buick Park Avenue come from 5 brands — DURA-BOND, ENGINETECH, KING ENGINE BEARINGS and 2 other brands. The "Popular" part is DURA-BOND B14.

Part numbers include DURA-BOND B14, ENGINETECH CC421 and DURA-BOND B14R, among others listed above.

This table covers the Camshaft Retainer / Thrust plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

One part is listed for the 2005 Buick Park Avenue — PIONEER PG801.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: ENGINETECH ECR308.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

11 Connecting Rod Bearing parts for the 2005 Buick Park Avenue come from 5 brands — MAHLE / CLEVITE, KING ENGINE BEARINGS, SEALED POWER and 2 other brands. The "Popular" part is ENGINETECH BB624J.

The High Performance section lists 2 options from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR6664XP is listed in this group.

In the Standard Replacement grade, MAHLE / CLEVITE, SEALED POWER, ENGINETECH and 2 other brands supply 9 parts: built to original-equipment specification. A representative part number is ENGINETECH BB624J.

This table covers the Connecting Rod bolts. Read more

One part is listed for the 2005 Buick Park Avenue — GM GENUINE 11610158.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Conversion / Lower Gasket Set parts for the 2005 Buick Park Avenue come from 6 brands — ENGINETECH, FEL-PRO, MAHLE / CLEVITE and 3 other brands. The "Popular" part is ENGINETECH B38CSC.

Listed part numbers: ENGINETECH B38CSC, FEL-PRO CS99174 and APEX ACS3143, plus the other parts above.

This table covers the crankshafts that turn piston motion into rotation. Read more

This group shows a single part: ENGINETECH 104000.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts are listed for the 2005 Buick Park Avenue, from MAHLE / CLEVITE, ENGINETECH, GM GENUINE and 2 other brands. ENGINETECH BC455J carries the "Popular" badge.

Part numbers include ENGINETECH BC455J, MAHLE / CLEVITE MS2022P and GM GENUINE 89017698, among others listed above.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

This group shows a single part: GM GENUINE 24503056.

This table covers the wear sleeves used to restore a Crankshaft Main Bearing seal surface. Read more

This group shows a single part: VICTOR REINZ 711348200.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts are listed for the 2005 Buick Park Avenue, from TIMKEN, WJB / INMOTION PARTS, FEL-PRO and 2 other brands. TIMKEN KWK99193 carries the "Popular" badge.

This group includes TIMKEN KWK99193, WJB / INMOTION PARTS WS99193 and FEL-PRO 16276 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

20 Crankshaft Seal parts are listed for the 2005 Buick Park Avenue, from TIMKEN, WJB / INMOTION PARTS, FEL-PRO and 8 other brands. FEL-PRO BS40708 carries the "Popular" badge.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: GM GENUINE 24507388.

This table covers the cylinder heads that close the top of the block. Read more

ENGINETECH supplies both parts for the 2005 Buick Park Avenue.

This group includes ENGINETECH CH1119R and ENGINETECH CH1120R.

This table covers the bolts that clamp the cylinder head to the block. Read more

5 Cylinder Head Bolt parts for the 2005 Buick Park Avenue come from 5 brands — APEX, GM GENUINE, MAHLE / CLEVITE and 2 other brands. The "Popular" part is APEX AHB359.

Listed part numbers: APEX AHB359, GM GENUINE 88891770 and MAHLE / CLEVITE GS33363, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

12 Cylinder Head Gasket parts for the 2005 Buick Park Avenue come from 6 brands — FEL-PRO, ULTRA-POWER, APEX and 3 other brands. The "Popular" part is FEL-PRO 9918PT.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Cylinder Head Gasket Set parts for the 2005 Buick Park Avenue come from 9 brands — FEL-PRO, SKP, APEX and 6 other brands. The "Popular" part is FEL-PRO HS9917PT3.

Part numbers include FEL-PRO HS9917PT3, SKP SKHS9917PT and APEX AHS3059, among others listed above.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

DORMAN supplies both parts for the 2005 Buick Park Avenue.

This group includes DORMAN 565019 and DORMAN 570006.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

4 Cylinder Repair Sleeve parts for the 2005 Buick Park Avenue come from 2 brands — MELLING and ENGINETECH.

Listed part numbers: ENGINETECH ESL1101, MELLING CSL138 and MELLING CSL138X, plus the other parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 2005 Buick Park Avenue — KAT'S HEATERS 11416.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO GM1228115.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts for the 2005 Buick Park Avenue come from 3 brands — ENGINETECH, AJUSA and MAHLE / CLEVITE.

Part numbers include AJUSA 50561700, ENGINETECH B38K4 and ENGINETECH B38K2, among others listed above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts are listed for the 2005 Buick Park Avenue, from MELLING, QUALCAST, SBI and 1 other brand.

Part numbers include MELLING V1735, QUALCAST 101735 and SBI 01735, among others listed above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

8 Expansion Plug parts for the 2005 Buick Park Avenue come from 3 brands — DORMAN, QUALCAST and MELLING. The "Popular" part is DORMAN 555077.

This group includes DORMAN 555077, DORMAN 565077 and DORMAN 555018 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts for the 2005 Buick Park Avenue come from 3 brands — ATP, PIONEER and DAYCO. The "Popular" part is DAYCO PB1434N.

This group includes DAYCO PB1434N, ATP 102055 and ATP 102284 and the remaining parts above.

This table covers the Harmonic Balancer bolts. Read more

One part is listed for the 2005 Buick Park Avenue — GM GENUINE 24504736.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 13339300.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

6 Intake Manifold parts are listed for the 2005 Buick Park Avenue, from DORMAN, FAMOUS BRAND, ATP and 3 other brands. DORMAN 615180 carries the "Popular" badge.

Part numbers include DORMAN 615180 and ATP 106001, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Intake Manifold Gasket parts for the 2005 Buick Park Avenue come from 6 brands — MAHLE / CLEVITE, FEL-PRO, VICTOR REINZ and 3 other brands. The "Popular" part is FEL-PRO MS98014T.

In the Premium grade, FEL-PRO and VICTOR REINZ supply 2 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is FEL-PRO MS98014T.

Standard Replacement: 9 parts, from MAHLE / CLEVITE, APEX, FEL-PRO and 3 other brands. A representative part number is FEL-PRO MS958091.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Intake Plenum Gasket parts are listed for the 2005 Buick Park Avenue, from GM GENUINE, DORMAN, FEL-PRO and 5 other brands. DORMAN 615207 carries the "Popular" badge.

Part numbers include DORMAN 615207, FEL-PRO MS95812 and APEX AMS3590, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Intake Valve parts are listed for the 2005 Buick Park Avenue, from ENGINETECH, MELLING, QUALCAST and 1 other brand.

Part numbers include ENGINETECH V4422, MELLING V1858 and QUALCAST 1013013, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts are listed for the 2005 Buick Park Avenue, from SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. ANCHOR 2896 carries the "Popular" badge.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SKM2896.

The Standard Replacement section: 4 options from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. ANCHOR 2896 is listed in this group.

Part numbers include ANCHOR 2896, SKP SKM2896 and DEA / MARMON RIDE CONTROL A5224, among others listed above.

This table covers the Motor Mount kits. Read more

One part is listed for the 2005 Buick Park Avenue — ANCHOR 301141.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

30 Oil parts are listed for the 2005 Buick Park Avenue, from VALVOLINE, MOBIL, LIQUI MOLY and 4 other brands. LIQUI MOLY 20228 carries the "Popular" badge. Grades run from Full Synthetic through Synthetic Blend; Full Synthetic is the most populated section, led by VALVOLINE, LIQUI MOLY, MOBIL and 2 other brands.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2005 Buick Park Avenue come from HAYDEN.

This group includes HAYDEN 238 and HAYDEN 153.

This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Oil Dipstick / Tube Seal parts for the 2005 Buick Park Avenue come from 3 brands — ELRING, FEL-PRO and GM GENUINE.

This group includes ELRING 584210, FEL-PRO 73889 and GM GENUINE 24504031.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts are listed for the 2005 Buick Park Avenue, from AGS, ELRING, GM GENUINE and 1 other brand.

Part numbers include AGS ODP00009, ELRING 823400 and GM GENUINE 11562588, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Oil Drain Plug Gasket parts for the 2005 Buick Park Avenue come from 9 brands — DORMAN, GM GENUINE, FEL-PRO and 6 other brands. The "Popular" part is DORMAN 097119.

This table covers the caps on the oil filler neck. Read more

6 Oil Filler Cap parts are listed for the 2005 Buick Park Avenue, from ACDELCO, MOTORAD, CALORSTAT and 3 other brands. ACDELCO FC208 carries the "Popular" badge.

Part numbers include ACDELCO FC208, MOTORAD MO99 and CALORSTAT OC2314, among others listed above.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Filler Cap Gasket parts for the 2005 Buick Park Avenue come from 3 brands — ELRING, FEL-PRO and GM GENUINE.

Part numbers include ELRING 592250, ELRING 823620 and FEL-PRO 73193, among others listed above.

This table covers the Oil Filler tubes. Read more

3 Oil Filler Tube parts are listed for the 2005 Buick Park Avenue, from DORMAN, SKP and ULTRA-POWER.

This group includes DORMAN 917414 and SKP SK917414 and the remaining parts above.