2013 Buick Enclave Electrical Connector Parts

This table covers the harness connectors at the A/C Compressor Clutch Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2860.

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 A/C Refrigerant Pressure Switch Connector parts are listed for the 2013 Buick Enclave, from STANDARD MOTOR PRODUCTS, WELLS, ACDELCO and 2 other brands. STANDARD MOTOR PRODUCTS HP4440 carries the "Popular" badge.

Listed part numbers: STANDARD MOTOR PRODUCTS HP4440, WELLS 1P1065 and ACDELCO PT2319, plus the other parts above.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 ABS Wheel Speed Sensor Connector parts for the 2013 Buick Enclave come from 4 brands — STANDARD MOTOR PRODUCTS, ACDELCO, HOLSTEIN and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS HP3945.

Listed part numbers: STANDARD MOTOR PRODUCTS HP3945, ACDELCO PT2160 and HOLSTEIN 2HAR0035, plus the other parts above.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Accelerator Pedal Position Sensor Connector parts for the 2013 Buick Enclave come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS S1479, UNITED MOTOR PRODUCTS CON23 and WELLS 1P1599.

This table covers the harness connectors at the Alternator / Generator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Alternator / Generator Connector parts for the 2013 Buick Enclave come from 5 brands — GM GENUINE, ACDELCO, ROSTRA and 2 other brands. The "Popular" part is GM GENUINE PT2971.

This group includes GM GENUINE PT2971, ACDELCO 84941154 and ROSTRA 610177 and the remaining parts above.

This table covers the harness connectors at the Ambient Air Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1018.

This table covers the harness connectors at the Antenna. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Buick Enclave — DORMAN 645631.

This table covers the harness connectors at the Blind Spot Detection Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2507.

This table covers the harness connectors at the Blower Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P2711.

This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

12 Blower Motor Control Module / Resistor Connector parts are listed for the 2013 Buick Enclave, from STANDARD MOTOR PRODUCTS, GPD, WELLS and 2 other brands. GPD 1713422 carries the "Popular" badge.

This table covers the harness connectors at the Blower Motor Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Buick Enclave — WELLS 1P1184.

This table covers the body-harness connectors and pigtails. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

One part is listed for the 2013 Buick Enclave — WELLS 1P4195.

This table covers the harness connectors at the Brake Fluid Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Buick Enclave — WELLS 1P1006.

This table covers the harness connectors at the Brake Pedal. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2013 Buick Enclave.

This group includes STANDARD MOTOR PRODUCTS S2374 and STANDARD MOTOR PRODUCTS S2506.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Camshaft Position Sensor Connector parts for the 2013 Buick Enclave come from 5 brands — STANDARD MOTOR PRODUCTS, ROSTRA, ULTRA-POWER and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S1458.

Listed part numbers: STANDARD MOTOR PRODUCTS S1458, ROSTRA 610472 and ULTRA-POWER 2701089, plus the other parts above.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Crankshaft Position Sensor Connector parts for the 2013 Buick Enclave come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S1497 and WELLS 1P2557.

This table covers the harness connectors at the Door Lock Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1691.

This table covers the harness connectors at the Door Lock Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Buick Enclave — STANDARD MOTOR PRODUCTS S1700.

This table covers the wiring-harness connectors at the Engine. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

One part is listed for the 2013 Buick Enclave — STANDARD MOTOR PRODUCTS S1568.

This table covers the harness connectors at the Fog / Driving Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Fog / Driving Lamp Connector parts for the 2013 Buick Enclave come from 3 brands — DORMAN, ROSTRA and WELLS.

Part numbers include DORMAN 85855, ROSTRA 610001 and WELLS 1P2076.

This table covers the harness connectors at the Fuel Injection Pressure Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Fuel Injection Pressure Sensor Connector parts for the 2013 Buick Enclave come from 2 brands — STANDARD MOTOR PRODUCTS and GM GENUINE.

Part numbers include GM GENUINE PT2391, STANDARD MOTOR PRODUCTS S1038 and STANDARD MOTOR PRODUCTS S1713.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Fuel Injector Connector parts for the 2013 Buick Enclave come from 3 brands — STANDARD MOTOR PRODUCTS, SKP and WELLS.

This group includes SKP SKS824, STANDARD MOTOR PRODUCTS HP4325 and STANDARD MOTOR PRODUCTS S1024 and the remaining parts above.

This table covers the harness connectors at the Fuel Sending Unit. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1265.

This table covers the harness connectors at the Fuel Tank Pressure Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Fuel Tank Pressure Sensor Connector parts are listed for the 2013 Buick Enclave, from WELLS, ROSTRA and STANDARD MOTOR PRODUCTS.

This group includes ROSTRA 610022, STANDARD MOTOR PRODUCTS S1445 and WELLS 1P1475 and the remaining parts above.

This table covers the harness connectors at the Glove Box Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: GM GENUINE PT146.

This table covers the harness connectors at the Heater Air Door Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: FOUR SEASONS 37280.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Ignition Coil Connector parts for the 2013 Buick Enclave come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS S1589, UNITED MOTOR PRODUCTS CON215 and WELLS 1P3295.

This table covers the harness connectors at the Ignition Starter Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Ignition Starter Switch Connector parts for the 2013 Buick Enclave come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS S2320 and WELLS 1P2517.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Knock / Detonation Sensor Connector parts for the 2013 Buick Enclave come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS S934, UNITED MOTOR PRODUCTS CON191 and WELLS 1P1571.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Manifold Pressure (MAP) Sensor Connector parts for the 2013 Buick Enclave come from 4 brands — BWD/NIEHOFF, STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and 1 other brand.

Listed part numbers: BWD/NIEHOFF PT944, STANDARD MOTOR PRODUCTS S1038 and UNITED MOTOR PRODUCTS CON7, plus the other parts above.

This table covers the harness connectors at the Mass Air Flow (MAF) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Buick Enclave — STANDARD MOTOR PRODUCTS S2507.

This table covers the harness connectors at the Oil Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Oil Level Sensor Connector parts for the 2013 Buick Enclave come from STANDARD MOTOR PRODUCTS.

Listed part numbers: STANDARD MOTOR PRODUCTS HP4325 and STANDARD MOTOR PRODUCTS S1024.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Oil Pressure Sender / Switch Connector parts are listed for the 2013 Buick Enclave, from ROSTRA, STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include ROSTRA 610271, STANDARD MOTOR PRODUCTS S955 and WELLS 1P1534.

This table covers the harness connectors at the Parking Aid Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Parking Aid Sensor Connector parts for the 2013 Buick Enclave come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS S1497 and WELLS 1P2557.

This table covers the harness connectors at the Parking Lamp Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Buick Enclave — WELLS 1P1184.

This table covers the harness connectors at the Power Brake Booster. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1488.

This table covers the harness connectors at the Power Window Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Buick Enclave — STANDARD MOTOR PRODUCTS S1793.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

METRA supplies the 6 Radio Connector parts for the 2013 Buick Enclave. METRA 712105 carries the "Popular" badge.

Listed part numbers: METRA 712105, METRA AXBUCHGM29 and METRA AXRSEHGL29, plus the other parts above.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Temperature Sender / Sensor Connector parts for the 2013 Buick Enclave come from 4 brands — STANDARD MOTOR PRODUCTS, DORMAN, SKP and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS S1024.

Listed part numbers: STANDARD MOTOR PRODUCTS S1024, DORMAN 645164 and SKP SKS1024, plus the other parts above.

This table covers the harness connectors at the Throttle Control Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2409.

This table covers the harness connectors at the Trailer Adapter. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: CURT 57101.

This table covers the harness connectors at the Trailer Brake Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Trailer Brake Switch Connector parts for the 2013 Buick Enclave come from CURT.

Listed part numbers: CURT 51422 and CURT 51423.

This table covers the trailer-lighting connectors at the hitch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

18 Trailer Connector parts are listed for the 2013 Buick Enclave, from CURT, STANDARD MOTOR PRODUCTS, DORMAN and 2 other brands. CURT 56415 carries the "Popular" badge.

This table covers the harness connectors at the Trailer Extension. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: CURT 56475.

This table covers the harness connectors at the Vapor Canister Purge Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Vapor Canister Purge Valve / Solenoid Connector parts for the 2013 Buick Enclave come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS S1414 and WELLS 1P2045.

This table covers the harness connectors at the Vapor Canister Vent Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

7 Vapor Canister Vent Valve / Solenoid Connector parts for the 2013 Buick Enclave come from 6 brands — WELLS, GM GENUINE, STANDARD MOTOR PRODUCTS and 3 other brands. The "Popular" part is GM GENUINE 19301207.

This group includes GM GENUINE 19301207, STANDARD MOTOR PRODUCTS S1829 and ROSTRA 610294 and the remaining parts above.

This table covers the harness connectors at the Variable Valve Timing (VVT) Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Variable Valve Timing (VVT) Solenoid Connector parts for the 2013 Buick Enclave come from 2 brands — STANDARD MOTOR PRODUCTS and WALKER PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS S1716 and WALKER PRODUCTS 2701102.

This table covers the harness connectors at the Washer Fluid Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Washer Fluid Level Sensor Connector parts for the 2013 Buick Enclave come from 3 brands — STANDARD MOTOR PRODUCTS, ACDELCO and WELLS.

Part numbers include ACDELCO PT2386, STANDARD MOTOR PRODUCTS HP3840 and STANDARD MOTOR PRODUCTS TX3A, among others listed above.

This table covers the terminals crimped onto a harness lead. Read more

This group shows a single part: GM GENUINE 84757974.