2005 Cadillac Escalade Drivetrain Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

This page lists 746 drivetrain parts for the 2005 Cadillac Escalade, across 105 part types, covering both the 5.3L V8 and the 6.0L V8. Every part shows its brand, manufacturer part number and fitment notes.

The drivetrain system on the 2005 Cadillac Escalade moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. The largest groups are Differential Rebuild Kit (60 parts), Differential Pinion Bearing / Race (51 parts) and Differential Ring and Pinion (46 parts). The other 102 part types cover the remaining 589 parts.

4WD Actuator

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: all 2005 Escalade engines 600101
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Does Not Include Harness
View on
Amazon
AAM Fits: all 2005 Escalade engines 40007173
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with 5 Blade Connectorwith 8.25 (In) Front Axle
View on
Amazon
DANA Fits: all 2005 Escalade engines 10033320
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Spicer
Fitment notes — DANA 10033320
Spicer
AWD
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 26060073
🇺🇸 US 🇨🇦 CA
AWDSQUARE PLUG
View on
Amazon
SKP Fits: all 2005 Escalade engines SK410101
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the actuators that engage four-wheel drive at the transfer case or axle. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.

4WD Actuator Clutch Shaft

Brand Part Number Markets Notes Buy
AAM Fits: all 2005 Escalade engines 40029249
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with 8.25 (In) Front Axle
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 19121908
🇺🇸 US 🇨🇦 CA
Includes Bearing
Fitment notes — GM GENUINE 19121908
Includes Bearing
AWD3.73 Rear Axle Ratio (GT4),4.10 Rear Axle Ratio (GT5)
View on
Amazon

This table covers the 4WD Actuator Clutch shafts.

4WD Actuator Clutch Sleeve

Brand Part Number Markets Notes Buy
GM GENUINE Fits: all 2005 Escalade engines 25818427
🇺🇸 US 🇨🇦 CA
Fits AWD3.42 Rear Axle Ratio (GU6),Active 2 Speed Push Button Control Transfer Case (NP8)
Fitment notes — GM GENUINE 25818427
Fits:
AWD3.42 Rear Axle Ratio (GU6),Active 2 Speed Push Button Control Transfer Case (NP8)
or:
AWD4.10 Rear Axle Ratio (GT5),Active 2 Speed Push Button Control Transfer Case (NP8)
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 25818426
🇺🇸 US 🇨🇦 CA
AWD
View on
Amazon

This table covers the 4WD Actuator Clutch sleeves.

4WD Actuator Fork

Brand Part Number Markets Notes Buy
GM GENUINE Fits: all 2005 Escalade engines 12479213
🇺🇸 US 🇨🇦 CA
AWD
View on
Amazon

This table covers the forks a 4WD actuator moves.

4WD Disconnect

Brand Part Number Markets Notes Buy
AAM Fits: 6.0L V8 40210868
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Spline Quantity: 28
Fitment notes — AAM 40210868
Spline Quantity: 28
Escalade ESV or Escalade EXTwith 8.25 (In) Front Axle
View on
Amazon

This table covers the disconnects that freewheel a front axle in two-wheel drive.

Axle / Differential Assembly

Brand Part Number Markets Notes Buy
ATP Fits: all 2005 Escalade engines 111500
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontAWD
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 84554713
🇺🇸 US 🇨🇦 CA
Rear AxlePositraction Limited-Slip Rear Axle (G80),8.50/8.625 Ring Gear Saginaw - American Axle
Fitment notes — GM GENUINE 84554713
Rear AxlePositraction Limited-Slip Rear Axle (G80),8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential8.50/8.625 RING GEAR
View on
Amazon

This table covers the Axle / Differential assemblies.

Axle Bolt

Brand Part Number Markets Notes Buy
AAM Fits: all 2005 Escalade engines 40023476
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
1/2"x13 x1.25" - 6 PT Flange Hex with Adhesivewith 10.5 (In) Rear Axle
View on
Amazon

This table covers the Axle bolts.

Axle Intermediate Shaft Bearing

Brand Part Number Markets Notes Buy
AAM Fits: all 2005 Escalade engines 26041516
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front Right11x17x13mm
Fitment notes — AAM 26041516
Front Right11x17x13mmwith 8.25 (In) Front Axle
View on
Amazon

This table covers the Axle Intermediate Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Axle Shaft

Economy

Brand Part Number Markets Notes Buy
DANA Popular Fits: all 2005 Escalade engines 10024295
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SVL
Fitment notes — DANA 10024295
SVL
Rearwith GM 8.5 & 8.6 Axleswith 30 Splineswith 33.58 IN Shaft Lengthwith Active Brake Control
View on
Amazon
DORMAN Fits: all 2005 Escalade engines 630146A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Does Not Include Bearing, Seal, or Hardware
Fitment notes — DORMAN 630146A
Does Not Include Bearing, Seal, or Hardware
Fits:
Rear Left8.5" Ring Gear or 8.625" Ring Gearwith Active Brake Control
or:
Rear Right8.5" Ring Gear or 8.625" Ring Gearwith Active Brake Control
View on
Amazon
DORMAN Fits: all 2005 Escalade engines 630425
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front Right InnerAWD
View on
Amazon
DORMAN Fits: all 2005 Escalade engines 630146
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes Hardware
Fitment notes — DORMAN 630146
Includes Hardware
Fits:
Rear Left8.5" Ring Gear or 8.625" Ring Gearwith Active Brake Control
or:
Rear Right8.5" Ring Gear or 8.625" Ring Gearwith Active Brake Control
View on
Amazon
DORMAN Fits: all 2005 Escalade engines 630420
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front Left InnerAWD
View on
Amazon
RICHMOND Fits: all 2005 Escalade engines 9225145
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Excel33.5625" Overall Length
Fitment notes — RICHMOND 9225145
Excel33.5625" Overall Length6 x 5.5 Lug Pattern30 Spline2.79" Bearing ODIncludes Bearing, Seal and Studs
Rearfor GM 8.5"/8.625" (10 Bolt)Stud 2.28" Long, .630" DiameterABS Ring Not Included
RearEscalade Base Modelfor GM 8.5" or 8.625" (10 Bolt)Stud 2.28" Long, .630" DiameterABS Ring Not Included
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
AAM Popular Fits: all 2005 Escalade engines 26058813
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front Leftwith 8.25 (In) Front Axle
View on
Amazon
AAM Fits: all 2005 Escalade engines 40000096
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear Rightwith 10.5 (In) Rear Axle
Fitment notes — AAM 40000096
Rear Rightwith 10.5 (In) Rear Axlewith 14 Axle Cover Bolts
Rear RightEscalade Base Modelwith 10.5 (In) Rear Axlewith 14 Axle Cover Bolts
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines GM825FAX001
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front Left InnerAWD
Fitment notes — MOTIVE GEAR GM825FAX001
Front Left InnerAWDGM 8.25 IFS Differential
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines ZAK630146
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Axle Shaft KitIncludes Wheel Bearing, Seal, Studs, Lug Nuts
Fitment notes — USA STANDARD GEAR ZAK630146
Axle Shaft KitIncludes Wheel Bearing, Seal, Studs, Lug Nuts30 Spline
RearGM 8.6" RearAxle Shaft Kit (1 Side)'03-'0733.6" Long6 Lug
View on
Amazon

This table covers the Axle shafts.

Axle Shaft Bearing

Economy

Brand Part Number Markets Notes Buy
WJB / INMOTION PARTS Fits: all 2005 Escalade engines WRSCH208
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front OuterAWD
Fitment notes — WJB / INMOTION PARTS WRSCH208
Front OuterAWDIndependent Front Suspensionwith AAM Axlewith 8.25 IN Ring Gear
View on
Amazon
WJB / INMOTION PARTS Fits: all 2005 Escalade engines WRB2010
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front InnerAWD
Fitment notes — WJB / INMOTION PARTS WRB2010
Front InnerAWDIndependent Front Suspensionwith AAM Axlewith 8.25 IN Ring Gear
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: all 2005 Escalade engines RW2010
🇺🇸 US 🇨🇦 CA
Fits RearTorrington
Fitment notes — GM GENUINE RW2010
Fits:
RearTorrington7200lb Power Brakes(JH2)
or:
RearExcept Mexican (P96)8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential
Fits:
RearEscalade Base Model or Escalade ESVTORRINGTON7200# Power BRAKES(JH2)
View on
Amazon
MOTIVE GEAR Popular Fits: all 2005 Escalade engines KIT513067
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Axle Differential Bearing and Seal Kit
Fitment notes — MOTIVE GEAR KIT513067
Axle Differential Bearing and Seal Kit
RearGM 8", 8.5"/8.625"Axle Bearing and Seal Kit
View on
Amazon
SKF Popular Fits: all 2005 Escalade engines B2010
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front LeftAWD
View on
Amazon
TIMKEN Popular Fits: all 2005 Escalade engines 513067
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear
View on
Amazon
ACDELCO Fits: all 2005 Escalade engines RP513067
🇺🇸 US 🇨🇦 CA
Gold / ProfessionalRepair Bearing
Fitment notes — ACDELCO RP513067
Gold / ProfessionalRepair Bearing
Rearwithout Quadrasteer SystemRepair Bearing For Worn Axle ShaftNot For tapered axle tube ID ModelsIncludes Seal
View on
Amazon
BCA Fits: all 2005 Escalade engines NBSCH208
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front Outerwith AAM Axle
Fitment notes — BCA NBSCH208
Front Outerwith AAM Axlewith 8.25 IN Ring Gearwith Independent Front Suspension
View on
Amazon
BCA Fits: all 2005 Escalade engines NBB2010
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front Innerwith AAM Axle
Fitment notes — BCA NBB2010
Front Innerwith AAM Axlewith 8.25 IN Ring Gearwith Independent Front Suspension
View on
Amazon
BCA Fits: all 2005 Escalade engines NBRP513067
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Repair Bearing
Fitment notes — BCA NBRP513067
Repair Bearing
Rear
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 26041515
🇺🇸 US 🇨🇦 CA
Front InnerAWD
Fitment notes — GM GENUINE 26041515
Front InnerAWDUsed On AdjusterOutside Diameter Measure 38.1MMwith RPO Code 1515
View on
Amazon
NATIONAL Fits: all 2005 Escalade engines B2010
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front InnerAWD
Fitment notes — NATIONAL B2010
Front InnerAWDwith 8.25 IN Ring Gearwith AAM AxleIndependent front suspension
View on
Amazon
NATIONAL Fits: all 2005 Escalade engines SCH208
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front OuterAWD
Fitment notes — NATIONAL SCH208
Front OuterAWDwith 8.25 IN Ring Gearwith AAM AxleIndependent front suspension
View on
Amazon
SCHAEFFLER Fits: all 2005 Escalade engines B2010
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Front LeftAWD
Fitment notes — SCHAEFFLER B2010
Fits:
Front LeftAWD
or:
Front Inner8.25" Ring Gear
or:
Front InnerEscalade Base Model8.25" Ring Gear
View on
Amazon
SCHAEFFLER Fits: all 2005 Escalade engines DR0151K
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Repair Bearing
Fitment notes — SCHAEFFLER DR0151K
Repair Bearing
Rear
View on
Amazon
SKF Fits: all 2005 Escalade engines BH208
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front RightAWD
View on
Amazon
TIMKEN Fits: all 2005 Escalade engines SCH208
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Needle Bearing
Fitment notes — TIMKEN SCH208
Needle Bearing
FrontAWD
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA18057
🇺🇸 US
FrontAWD
Fitment notes — USA STANDARD GEAR USA18057
FrontAWDGM 8.25"IFS1.625" O.D.
FrontAWDEscalade Base ModelGM 8.25"IFS1.625" O.D.
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA10005
🇺🇸 US
Axle Shaft Bearing KitC10 Aero
Fitment notes — USA STANDARD GEAR USA10005
Axle Shaft Bearing KitC10 Aero2.800" OD.Includes 1 Bearing And 1 Seal
RearGM 8.6"Torrington Brand2.800" OD.
RearEscalade Base ModelGM 8.6"Torrington Brand2.800" OD.
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA18059
🇺🇸 US
FrontAWD
Fitment notes — USA STANDARD GEAR USA18059
FrontAWDGM 8.25"IFS1.25" I.D.1.5 in. O.D.
FrontAWDEscalade Base ModelGM 8.25"IFS1.25" I.D.1.5 in. O.D.
View on
Amazon

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Axle Shaft Flange Gasket

Brand Part Number Markets Notes Buy
DORMAN Fits: 6.0L V8 926900
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearEscalade EXT
Fitment notes — DORMAN 926900
RearEscalade EXT10.5" Ring Gear
View on
Amazon

This table covers the gaskets that seal the Axle Shaft Flange. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Axle Shaft Lock / Snap Ring

Brand Part Number Markets Notes Buy
AAM Fits: 6.0L V8 40023211
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Escalade ESV or Escalade EXTwith 8.25 (In) Front Axle
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 12479372
🇺🇸 US 🇨🇦 CA
Front InnerAWD
Fitment notes — GM GENUINE 12479372
Front InnerAWD3.42 Rear Axle Ratio (GU6),Active 2 Speed Push Button Control Transfer Case (NP8)
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 26056600
🇺🇸 US 🇨🇦 CA
Material: Steel
Fitment notes — GM GENUINE 26056600
Material: Steel
Fits:
Front InnerAWD3.73 Rear Axle Ratio (GT4)
or:
Front InnerAWD3.42 Rear Axle Ratio (GU6),Active 2 Speed Push Button Control Transfer Case (NP8)
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA33369
🇺🇸 US
Inner Axle Snap Ring
Fitment notes — USA STANDARD GEAR USA33369
Inner Axle Snap Ring
AWDGM 8.25"IFSStub Axle Retaining Clip
AWDEscalade Base ModelGM 8.25"IFSStub Axle Retaining Clip
View on
Amazon

This table covers the Axle Shaft Lock / Snap rings.

Axle Shaft Pilot Bearing

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: all 2005 Escalade engines RW203
🇺🇸 US 🇨🇦 CA
FrontAWD
Fitment notes — GM GENUINE RW203
FrontAWDInner BearingHEIGHT 10.69MM
View on
Amazon
BCA Fits: all 2005 Escalade engines NBSCH78
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Frontwith AAM Axle(s)
Fitment notes — BCA NBSCH78
Frontwith AAM Axle(s)with 8.25 IN Ring Gearwith Independent Front Suspension
View on
Amazon
SCHAEFFLER Fits: all 2005 Escalade engines SCH78
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits FrontAWD
Fitment notes — SCHAEFFLER SCH78
Fits:
FrontAWD
or:
Front8.25" Ring Gear
or:
FrontEscalade Base Model8.25" Ring Gear
View on
Amazon
SKF Fits: all 2005 Escalade engines BH78
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontAWD
View on
Amazon
WJB / INMOTION PARTS Fits: all 2005 Escalade engines WRSCH78
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontAWD
Fitment notes — WJB / INMOTION PARTS WRSCH78
FrontAWDIndependent Front Suspensionwith AAM Axlewith 8.25 IN Ring Gear
View on
Amazon

This table covers the Axle Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Axle Shaft Retainer / Clip

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: all 2005 Escalade engines 81050
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Axle Shaft Lock Assortment
Fitment notes — DORMAN 81050
Axle Shaft Lock Assortment
8.5", 8.625", 8.75", or 8.875" Ring Gear
View on
Amazon
DORMAN Fits: all 2005 Escalade engines 13851
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear9.5" Ring Gear or 9.75" Ring Gear
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 03833322
🇺🇸 US 🇨🇦 CA
Rear Axle8.50/8.625 Ring Gear Saginaw - American Axle
Fitment notes — GM GENUINE 03833322
Rear Axle8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential39.43 X 19.94MM
View on
Amazon
GM GENUINE Fits: 6.0L V8 14012746
🇺🇸 US 🇨🇦 CA
Rear AxleRWD
Fitment notes — GM GENUINE 14012746
Rear AxleRWDHybrid Axle (AXN), 3.73 Rear Axle Ratio (GT4), Active Brake Control (JL4), 9.50 Ring Gear Saginaw - American AxleExc. Positraction Limited-Slip Rear Axle (G80)7200# Power Brakes(JH2)43.0 X 22.5mm
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines 3833322
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearGM 8.5"/8.625"
View on
Amazon

This table covers the Axle Shaft retainers and clips.

Axle Shaft Seal

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: all 2005 Escalade engines 291315
🇺🇸 US 🇨🇦 CA
Color: Black, Orange
Fitment notes — GM GENUINE 291315
Color: Black, Orange
RearExcept Mexican (P96)8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential
Fits:
RearRWDExc. Positraction Limited-Slip Rear Axle (G80)7200lb Power Brakes(JH2)3.73 Rear Axle Ratio (GT4),Active Brake Control (JL4),9.50 Ring Gear Saginaw - American Axle
or:
RearExcept Mexican (P96)8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential
View on
Amazon
NATIONAL Popular Fits: all 2005 Escalade engines 710648
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front InnerAWD
Fitment notes — NATIONAL 710648
Front InnerAWDwith 8.25 IN Ring Gearwith AAM AxleIndependent front suspension
View on
Amazon
TIMKEN Popular Fits: all 2005 Escalade engines 4762N
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear
View on
Amazon
AAM Fits: 6.0L V8 40038875
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontEscalade ESV or Escalade EXT
Fitment notes — AAM 40038875
FrontEscalade ESV or Escalade EXTwith 8.25 (In) Front Axle
View on
Amazon
ACDELCO Fits: all 2005 Escalade engines 710648
🇺🇸 US 🇨🇦 CA
Gold
Fitment notes — ACDELCO 710648
Gold
Front InnerAWDwith 8.25 IN Diameter Ring Gear
View on
Amazon
BCA Fits: all 2005 Escalade engines NS710648
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front Innerwith AAM Axle(s)
Fitment notes — BCA NS710648
Front Innerwith AAM Axle(s)with 8.25 IN Ring Gearwith Independent Front Suspension
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 22761722
🇺🇸 US
Fits Front InnerAWD
Fitment notes — GM GENUINE 22761722
Fits:
Front InnerAWD3.42 Rear Axle Ratio (GU6),Active 2 Speed Push Button Control Transfer Case (NP8)
or:
Front InnerAWD3.73 Rear Axle Ratio (GT4),4.10 Rear Axle Ratio (GT5)
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines 16146CR
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear2.849" OD, 1.618" ID, .5" Wide
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines 4762N
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear2.841" OD, 1.618" ID, .5" Wide
View on
Amazon
SCHAEFFLER Fits: all 2005 Escalade engines SS2332
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front InnerAWD
Fitment notes — SCHAEFFLER SS2332
Front InnerAWD2.41" O.D. X 0.49" Width
View on
Amazon
SKF Fits: all 2005 Escalade engines 12587
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontAWD
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA30108
🇺🇸 US
Yukon Mighty Seal
Fitment notes — USA STANDARD GEAR USA30108
Yukon Mighty Seal
RearGM 8.6"
RearEscalade Base ModelGM 8.6"
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA30273
🇺🇸 US 🇨🇦 CA
Yukon Mighty Seal
Fitment notes — USA STANDARD GEAR USA30273
Yukon Mighty Seal
Front InnerAWDGM 8.25"Independent Front Suspension
Front InnerAWDEscalade Base ModelGM 8.25"Independent Front Suspension
View on
Amazon
WJB / INMOTION PARTS Fits: all 2005 Escalade engines WS710648
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front InnerAWD
Fitment notes — WJB / INMOTION PARTS WS710648
Front InnerAWDIndependent Front Suspensionwith AAM Axlewith 8.25 IN Ring Gear
View on
Amazon

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Axle Vent Valve

Brand Part Number Markets Notes Buy
GM GENUINE Fits: all 2005 Escalade engines 12479390
🇺🇸 US 🇨🇦 CA
FrontAWD
View on
Amazon

This table covers the Axle Vent valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

CV Axle

Economy

Brand Part Number Markets Notes Buy
CARDONE Fits: all 2005 Escalade engines 601009
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Remanufacturedwith Standard Neoprene Outboard Boot
Fitment notes — CARDONE 601009
Remanufacturedwith Standard Neoprene Outboard Boot
Fits:
Front LeftAWDThis Will Fit The Standard Vehicle Fitment Application
or:
Front RightAWDThis Will Fit The Standard Vehicle Fitment Application
Fits:
Front LeftEscalade ESV or Escalade EXT
or:
Front RightEscalade ESV or Escalade EXT
or:
Front LeftAWDEscalade Base ModelThis Will Fit The Standard Vehicle Fitment Application
or:
Front RightAWDEscalade Base ModelThis Will Fit The Standard Vehicle Fitment Application
View on
Amazon

Heavy Duty

Brand Part Number Markets Notes Buy
GSP Fits: all 2005 Escalade engines NCV10142XD
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Xtreme Duty CV AxleFor Extreme Operating Temperatures
Fitment notes — GSP NCV10142XD
Xtreme Duty CV AxleFor Extreme Operating Temperatures
Frontwith Standard Suspension
View on
Amazon
TOP NOTCH Fits: all 2005 Escalade engines TN20094XD
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Xtreme Duty
Fitment notes — TOP NOTCH TN20094XD
Xtreme Duty
FrontFor Use with Extreme Operating Temperatureswith Standard Suspension
View on
Amazon
TRAKMOTIVE Fits: all 2005 Escalade engines GM8033HDX
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Extreme Duty
Fitment notes — TRAKMOTIVE GM8033HDX
Extreme Duty
FrontAWDNot For Use with Lifted or Modified SuspensionsAxle thread does Not match OE
Fits:
FrontAWDEscalade Base ModelNot For Use with Lifted or Modified SuspensionsAxle thread does Not match OE
or:
FrontEscalade ESV or Escalade EXTNot For Use with Lifted or Modified Suspensions
View on
Amazon

Specialty - For Lifted Vehicles

Brand Part Number Markets Notes Buy
GSP Fits: all 2005 Escalade engines NCV10142XDP
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Extended Travel CV Axle
Fitment notes — GSP NCV10142XDP
Extended Travel CV Axle
Frontwith Standard or Lifted up To 4 In Suspension
View on
Amazon
TOP NOTCH Fits: all 2005 Escalade engines TN20094XDP
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Extended Travel
Fitment notes — TOP NOTCH TN20094XDP
Extended Travel
Frontwith Standard or Lifted up To 4 In Suspension
View on
Amazon
TRAKMOTIVE Fits: all 2005 Escalade engines GM8033XTT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Extended TravelExtreme Articulation For Lifted Suspensions
Fitment notes — TRAKMOTIVE GM8033XTT
Extended TravelExtreme Articulation For Lifted Suspensions
FrontAWDAxle Thread Does Not Match OE
Fits:
FrontEscalade ESV or Escalade EXT
or:
FrontAWDEscalade Base ModelAxle Thread Does Not Match OE
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
GSP Popular Fits: all 2005 Escalade engines NCV10142
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Does Not Include ABS Ring
Fitment notes — GSP NCV10142
Does Not Include ABS Ring
Frontwith Standard Suspension
View on
Amazon
TOP NOTCH Popular Fits: all 2005 Escalade engines TN20094
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Frontwith Standard Suspension
View on
Amazon
TRAKMOTIVE Popular Fits: all 2005 Escalade engines GM8033
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontAWD
Fitment notes — TRAKMOTIVE GM8033
FrontAWDNot For Use with Lifted or Modified SuspensionsAxle thread does Not match OE
Fits:
FrontAWDEscalade Base ModelNot For Use with Lifted or Modified SuspensionsAxle thread does Not match OE
or:
FrontEscalade ESV or Escalade EXTNot For Use with Lifted or Modified Suspensions
View on
Amazon
APWI Fits: all 2005 Escalade engines GM8001
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front
Fitment notes — APWI GM8001
Front
FrontEscalade Base Model
View on
Amazon

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes.

CV Intermediate Shaft

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Fits: all 2005 Escalade engines USA21618
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stub Axle
Fitment notes — USA STANDARD GEAR USA21618
Stub Axle
Front LeftAWDGM 8.25 In. IFS FrontInner Stub Axle Shaft28 Spline5.06" Length
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA21562
🇺🇸 US
Stub Axle
Fitment notes — USA STANDARD GEAR USA21562
Stub Axle
Front Right InnerAWDGM 8.25"IFS28 Spline19.6" Length
Front Right InnerAWDEscalade Base ModelGM 8.25"IFS28 Spline19.6" Length
View on
Amazon

This table covers the CV Intermediate shafts.

CV Joint

Brand Part Number Markets Notes Buy
GM GENUINE Fits: all 2005 Escalade engines 22928970
🇺🇸 US 🇨🇦 CA
Front OuterAWD
View on
Amazon
VAICO Fits: all 2005 Escalade engines V510521
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front OuterAWD
View on
Amazon
VAICO Fits: all 2005 Escalade engines V510523
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front InnerAWD
View on
Amazon

This table covers the constant-velocity joints at each end of a drive axle.

CV Joint Boot

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: all 2005 Escalade engines 614003
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
OuterJoint Diameter 3.44"
View on
Amazon
MEVOTECH Popular Fits: all 2005 Escalade engines DX552
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front Inner
View on
Amazon
DORMAN Fits: all 2005 Escalade engines 614004
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
InnerJoint Diameter 3.50"
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 12471527
🇺🇸 US 🇨🇦 CA
Includes Clamps
Fitment notes — GM GENUINE 12471527
Includes Clamps
FrontAWDwith Double Clamp Boot
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 12474084
🇺🇸 US 🇨🇦 CA
Includes Clamps
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 19256071
🇺🇸 US 🇨🇦 CA
FrontAWD
View on
Amazon
MEVOTECH Fits: all 2005 Escalade engines DX554
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front Outer3.954 IN Clamp Outside Diameter
View on
Amazon

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn.

CV Joint Lock Ring

Brand Part Number Markets Notes Buy
GM GENUINE Fits: all 2005 Escalade engines 07849284
🇺🇸 US 🇨🇦 CA
Compression Tool Required: YES
Fitment notes — GM GENUINE 07849284
Compression Tool Required: YES
Front InnerAWD
View on
Amazon

This table covers the CV Joint Lock rings.

Differential Bearing Adjuster

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Fits: all 2005 Escalade engines USA33355
🇺🇸 US
Carrier Bearing Adjuster Lock Tab
Fitment notes — USA STANDARD GEAR USA33355
Carrier Bearing Adjuster Lock Tab
AWDSide bearing adjuster lock tab for GM 8.25 in. IFS, bent T style
AWDEscalade Base ModelSide bearing adjuster lock tab for GM 8.25 in. IFS, bent T style
View on
Amazon

This table covers the adjusters that set differential bearing preload.

Differential Bearing Retainer

Brand Part Number Markets Notes Buy
AAM Fits: all 2005 Escalade engines 26061404
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with 14 Bolt Coverwith 10.5 (In) Rear Axle
View on
Amazon

This table covers the Differential Bearing retainers.

Differential Carrier

Economy

Brand Part Number Markets Notes Buy
DORMAN Fits: all 2005 Escalade engines 697909
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear30 Spline
Fitment notes — DORMAN 697909
Rear30 Spline8.5" Ring Gear or 8.625" Ring GearASSEMBLY
View on
Amazon
DORMAN Fits: all 2005 Escalade engines 697393
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontAWD
Fitment notes — DORMAN 697393
FrontAWDwith RPO Code GT4 (3.73 Axle Ratio)
View on
Amazon
PRO-KING Fits: all 2005 Escalade engines 742G715B
🇺🇸 US 🇨🇦 CA
Differential Carrier or HousingRear Differential
Fitment notes — PRO-KING 742G715B
Differential Carrier or HousingRear DifferentialLateCasting # 7875GM 8.5"/8.6"Non-Posi
View on
Amazon
RICHMOND Fits: all 2005 Escalade engines XL5050
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Excel30 Spline
Fitment notes — RICHMOND XL5050
Excel30 SplineIncludes Internal Kit
Rearfor GM 8.5"/8.625" (10 Bolt)1.31" Axle Spline Diameter2.73 and HigherOpen
RearEscalade Base Modelfor GM 8.5"/8.625" (10 Bolt)1.31" Axle Spline Diameter2.73 and HigherOpen
View on
Amazon
RICHMOND Fits: 6.0L V8 XL5042
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
EXCel
Fitment notes — RICHMOND XL5042
EXCel
FrontEscalade EXT4WDFor GM 8.25" IFSEmpty CaseOpenUse with Internal Kit XL-4046
View on
Amazon

Heavy Duty

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Popular Fits: all 2005 Escalade engines USA26016
🇺🇸 US
Yukon Dura Grip
Fitment notes — USA STANDARD GEAR USA26016
Yukon Dura Grip
RearPositraction / Limited SlipGM 8.5 & 8.6" Rear30 Spline2.73 and Up1.781 In. Bearing Journal
RearEscalade Base ModelPositraction / Limited SlipGM 8.5 & 8.6"30 Spline2.73 and Up1.781 In. Bearing Journal
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
AAM Popular Fits: all 2005 Escalade engines 40048044
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rearwith 10 Bolt Cover
Fitment notes — AAM 40048044
Rearwith 10 Bolt Coverwith 8.6 (In) Rear AxleCarrier Unit with gears
View on
Amazon
DANA Popular Fits: all 2005 Escalade engines 10019412
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Spicer
Fitment notes — DANA 10019412
Spicer
Rearwith Empty Casewith GM 8.5 Axlewith 2.73 or Higher Rear Axle Ratiowith 28 Spline Teeth or with 30 Spline Teethwith Open Differential
View on
Amazon
DANA Popular Fits: all 2005 Escalade engines 10019417
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Spicer
Fitment notes — DANA 10019417
Spicer
Frontwith Open Differentialwith 3.42 or Higher Rear Axle Ratiowith Empty Casewith GM 8.25 IFS Axle
FrontEscalade Base Modelwith Open Differentialwith 3.42 or Higher Rear Axle Ratiowith Empty Casewith GM 8.25 IFS Axle
View on
Amazon
AAM Fits: 6.0L V8 26018131
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Carrier Unit without gears
Fitment notes — AAM 26018131
Carrier Unit without gears
Escalade ESV or Escalade EXTwith 8.25 (In) Front Axle
View on
Amazon
AAM Fits: 6.0L V8 40195444
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Escalade ESV or Escalade EXTwith 8.25 (In) Front Axle
Fitment notes — AAM 40195444
Escalade ESV or Escalade EXTwith 8.25 (In) Front AxleCarrier Unit with gears
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 15801501
🇺🇸 US 🇨🇦 CA
FrontAWD
Fitment notes — GM GENUINE 15801501
FrontAWDLESS INTERNAL GEARS
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 19244836
🇺🇸 US 🇨🇦 CA
with Side, Pinion Gears and ShaftExcept Positraction Limited-Slip Rear Axle (G80), Mexican (P96)
Fitment notes — GM GENUINE 19244836
with Side, Pinion Gears and ShaftExcept Positraction Limited-Slip Rear Axle (G80), Mexican (P96)8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines GM86L
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
30 Spline
Fitment notes — MOTIVE GEAR GM86L
30 Spline
RearGM 8.625" (10 Bolt)1.31" Axle Spline Diameter2.73 and HigherIncludes Internal KitOpen1999 and Later Requires Use of Bearing LM603049 and Race LM6030121998 and Earlier Use Bearing LM102949 and Race LM102911
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines 14038087
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Differential Gear Case1.37 in. Dia.
Fitment notes — MOTIVE GEAR 14038087
Differential Gear Case1.37 in. Dia.33 SplineEmptyOpen
FrontAWDChrysler 9.25", GM 9.25" IFS, 9.5"Empty CaseOpenUse with Internal Kit GM9.5BI3.42 Ratio Carrier and Numerically Higher
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA20096
🇺🇸 US
Carrier caseCarrier Only
Fitment notes — USA STANDARD GEAR USA20096
Carrier caseCarrier OnlyFor Carriers with 1 Large and 1 Small Window (Casting #1073 or 1085)
RearGM 8.6"Open Differential
RearEscalade Base ModelGM 8.6"Open Differential
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA20086
🇺🇸 US
Carrier case
Fitment notes — USA STANDARD GEAR USA20086
Carrier case
FrontAWDGM 8.25"IFSStandard
FrontAWDEscalade Base ModelGM 8.25"IFSStandard
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA20098
🇺🇸 US
Open Differential (without Limited Slip) Carrier Case Includes Spider GearsLoaded Carrier
Fitment notes — USA STANDARD GEAR USA20098
Open Differential (without Limited Slip) Carrier Case Includes Spider GearsLoaded CarrierSpider Gears Pre-InstalledFor Carriers with 1 Large and 1 Small Window (Casting #1073 or 1085)
RearGM 8.6"10 Bolt
RearEscalade Base ModelGM 8.6"10 Bolt
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA20131
🇺🇸 US
Carrier case
Fitment notes — USA STANDARD GEAR USA20131
Carrier case
FrontAWDGM 8.25"Standard Open IFSLoaded
FrontAWDEscalade Base ModelGM 8.25"Standard Open IFSLoaded
View on
Amazon

This table covers the carriers that hold the differential gears in the axle.

Differential Carrier Bearing / Race

Economy

Brand Part Number Markets Notes Buy
WJB / INMOTION PARTS Popular Fits: all 2005 Escalade engines WTA36
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rearwith AAM Axle
Fitment notes — WJB / INMOTION PARTS WTA36
Rearwith AAM Axlewith 8.625 IN Ring Gear
View on
Amazon
WJB / INMOTION PARTS Fits: all 2005 Escalade engines WTLM501314
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race
Fitment notes — WJB / INMOTION PARTS WTLM501314
Race
FrontAWDIndependent Front Suspensionwith AAM Axlewith 8.25 IN Ring Gear
View on
Amazon
WJB / INMOTION PARTS Fits: all 2005 Escalade engines WTLM501349
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontAWD
Fitment notes — WJB / INMOTION PARTS WTLM501349
FrontAWDIndependent Front Suspensionwith AAM Axlewith 8.25 IN Ring Gear
View on
Amazon
WJB / INMOTION PARTS Fits: all 2005 Escalade engines WTLM603012
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race
Fitment notes — WJB / INMOTION PARTS WTLM603012
Race
Rearwith 8.50, 8.625 Ring Gear
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ACDELCO Popular Fits: all 2005 Escalade engines A36
🇺🇸 US 🇨🇦 CA
GoldSet
Fitment notes — ACDELCO A36
GoldSetIncludes LM603049 & LM603012, Cup and ConeTaper Bearing Set
Rearwith 8.5/8.6 IN Diameter Ring Gear
View on
Amazon
GM GENUINE Popular Fits: all 2005 Escalade engines 26066885
🇺🇸 US 🇨🇦 CA
Front InnerAWD
Fitment notes — GM GENUINE 26066885
Front InnerAWDUsed On Housing
View on
Amazon
TIMKEN Popular Fits: all 2005 Escalade engines LM501314
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race
Fitment notes — TIMKEN LM501314
Race
FrontAWDUnder 7,500 GVW
View on
Amazon
TIMKEN Popular Fits: all 2005 Escalade engines LM501349
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontAWD
Fitment notes — TIMKEN LM501349
FrontAWDUnder 7,500 GVW
View on
Amazon
TIMKEN Popular Fits: all 2005 Escalade engines SET42
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Bearing and Race Set
Fitment notes — TIMKEN SET42
Bearing and Race Set
Rear9.5" Ring Gear
RearEscalade Base Model9.5" Ring Gear
View on
Amazon
ACDELCO Fits: all 2005 Escalade engines LM501349
🇺🇸 US 🇨🇦 CA
Gold
Fitment notes — ACDELCO LM501349
Gold
FrontAWD
View on
Amazon
ACDELCO Fits: all 2005 Escalade engines S13
🇺🇸 US 🇨🇦 CA
GM Original EquipmentIncludes Cup & Cone
Fitment notes — ACDELCO S13
GM Original EquipmentIncludes Cup & Cone
FrontAWDTimken, LM501349-LM501314, 41.28MM ID X 73.42MM OD X 21.43MM THK
View on
Amazon
ACDELCO Fits: all 2005 Escalade engines S29
🇺🇸 US 🇨🇦 CA
Includes Cup & Cone
Fitment notes — ACDELCO S29
Includes Cup & Cone
BEARING,FRT DIFF Drive Pinion Gear OTR 4 WHEEL DRIVEF/AXL, TIMKEN, M88048-M88010, 1-5/16 IN ID X 2-11/16 IN OD X 7/8 IN THK, RR AXL
View on
Amazon
BCA Fits: all 2005 Escalade engines NBLM501314
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race
Fitment notes — BCA NBLM501314
Race
FrontAWDwith AAM Axlewith 8.25 IN Ring Gearwith Independent Front Suspension
View on
Amazon
BCA Fits: all 2005 Escalade engines NBLM501349
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontAWD
Fitment notes — BCA NBLM501349
FrontAWDwith AAM Axlewith 8.25 IN Ring Gearwith Independent Front Suspension
View on
Amazon
BCA Fits: all 2005 Escalade engines NBA36
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Taper Bearing SetIncludes Cup and Cone
Fitment notes — BCA NBA36
Taper Bearing SetIncludes Cup and Cone
Rearwith AAM Axlewith 8.625 IN Ring Gear
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines S1413
🇺🇸 US 🇨🇦 CA
Includes Cup and Cone
Fitment notes — GM GENUINE S1413
Includes Cup and Cone
FrontAWDTimken, LM501349-LM501314, 41.28MM ID X 73.42MM OD X 21.43MM THK1.625/2.891 Diameter
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines S1380
🇺🇸 US 🇨🇦 CA
8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential
Fitment notes — GM GENUINE S1380
8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential8.5/8.625 Diameter
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines S1198
🇺🇸 US 🇨🇦 CA
Includes Cup and Cone
Fitment notes — GM GENUINE S1198
Includes Cup and Cone
RWDTimken, JLM506849-JLM506811, 55MM ID X 90MM OD X 25mm Thick9.50 Ring Gear Saginaw - American Axle
View on
Amazon
NSK Fits: all 2005 Escalade engines TRB36
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Kit Contents: 1 Cup, 1 ConeBearing and Race Set
Fitment notes — NSK TRB36
Kit Contents: 1 Cup, 1 ConeBearing and Race Set
RearID 45.2 mm
View on
Amazon
RICHMOND Fits: all 2005 Escalade engines 2900061
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Bearing & Race Kit or Differential Bearing Kit
Fitment notes — RICHMOND 2900061
Bearing & Race Kit or Differential Bearing Kit
RearGM 8.5"/8.625" (10 Bolt)3.06" Carrier Cup OD, 1.78" Carrier ConeIncludes Timken Bearings, Bearing Races
View on
Amazon
SCHAEFFLER Fits: all 2005 Escalade engines LM501314
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race
Fitment notes — SCHAEFFLER LM501314
Race
Fits:
Rear16.604 mm Width73.431 mm Outside Diameter
or:
Frontwith 8.25 In Ring Gear16.604 mm Width73.431 mm Outside Diameter
Fits:
FrontEscalade Base Modelwith 8.25 In Ring Gear16.604 mm Width73.431 mm Outside Diameter
or:
RearEscalade Base Model16.604 mm Width73.431 mm Outside Diameter
or:
FrontEscalade ESV or Escalade EXTwith 8.25 In Ring Gear16.604 mm Width73.431 mm Outside Diameter
View on
Amazon
SCHAEFFLER Fits: all 2005 Escalade engines KLM501349
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Bearing Only
Fitment notes — SCHAEFFLER KLM501349
Bearing Only
Front8.25" Ring Gear
Fits:
FrontEscalade Base Model8.25" Ring Gear
or:
FrontEscalade ESVEscalade EXT8.25" Ring Gear
View on
Amazon
SCHAEFFLER Fits: all 2005 Escalade engines LM603012
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race
Fitment notes — SCHAEFFLER LM603012
Race
Rear77.788 mm Outside Diameter
View on
Amazon
SCHAEFFLER Fits: all 2005 Escalade engines KT36
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Rear1.781 In Inside Diameter X 3.063 In Outside Diameter X 0.844 In Thick
Fitment notes — SCHAEFFLER KT36
Fits:
Rear1.781 In Inside Diameter X 3.063 In Outside Diameter X 0.844 In Thick
or:
Rearwith 8.625 In Ring Gear1.781 In Inside Diameter X 3.063 In Outside Diameter X 0.844 In Thick
or:
RearEscalade Base Model or Escalade ESVwith 8.625 In Ring Gear1.781 In Inside Diameter X 3.063 In Outside Diameter X 0.844 In Thick
View on
Amazon
SCHAEFFLER Fits: all 2005 Escalade engines KLM603049
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Bearing Only
Fitment notes — SCHAEFFLER KLM603049
Bearing Only
Rear19.84 mm Width45.24 mm Inside Diameter
View on
Amazon
SCHAEFFLER Fits: all 2005 Escalade engines KT45
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Bearing and Race Set
Fitment notes — SCHAEFFLER KT45
Bearing and Race Set
Front41.275 mm Inside Diameter X 73.431 mm Outside Diameter X 19.558 mm Thick
FrontEscalade Base Model41.275 mm Inside Diameter X 73.431 mm Outside Diameter X 19.558 mm Thick
View on
Amazon
SKF Fits: all 2005 Escalade engines LM501314VP
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race
Fitment notes — SKF LM501314VP
Race
Frontwith 8.25 Ring Gear
View on
Amazon
SKF Fits: all 2005 Escalade engines LM603012
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race
Fitment notes — SKF LM603012
Race
Rearwith 8.50, 8.625 Ring Gear
View on
Amazon
SKF Fits: all 2005 Escalade engines LM603049VP
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with 1.7810 In. Bearing Inside Diameter
Fitment notes — SKF LM603049VP
with 1.7810 In. Bearing Inside Diameter
Rear0.7812" Cone Length0.2500" Cup Lengthwith 8.50, 8.625 Ring Gear
View on
Amazon
SKF Fits: all 2005 Escalade engines BR36
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rearwith 8.50, 8.625 Ring Gear
View on
Amazon
SKF Fits: all 2005 Escalade engines BR72
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Frontwith 8.25 Ring Gear
View on
Amazon
TIMKEN Fits: all 2005 Escalade engines SET36
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Tapered Roller Bearing
Fitment notes — TIMKEN SET36
Tapered Roller Bearing
Rear8.5", 8.625" RING GEAR
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA57010
🇺🇸 US
Includes Carrier Bearings, Races, Stackable Carrier Shims
Fitment notes — USA STANDARD GEAR USA57010
Includes Carrier Bearings, Races, Stackable Carrier Shims
RearGM 8.6"Rear Rearward
RearEscalade Base ModelGM 8.6"Rear Rearward
View on
Amazon
Brand Part Number Markets Notes Buy
AAM Fits: all 2005 Escalade engines 26041515
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
32x86x16mmLeft Side Inner Axle Bearing
Fitment notes — AAM 26041515
32x86x16mmLeft Side Inner Axle Bearingwith 8.25 (In) Front Axle
View on
Amazon

This table covers the bearings and races that support the differential carrier.

Differential Carrier Shim

Brand Part Number Markets Notes Buy
MOTIVE GEAR Popular Fits: all 2005 Escalade engines SS12
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Super shimsStackable Carrier Shim Kit
Fitment notes — MOTIVE GEAR SS12
Super shimsStackable Carrier Shim Kit
RearGM 8.5/8.625"
View on
Amazon
MOTIVE GEAR Popular Fits: all 2005 Escalade engines SS10
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Differential Carrier Shim Kit
Fitment notes — MOTIVE GEAR SS10
Differential Carrier Shim Kit
RearGM 8.5"/8.625"
View on
Amazon
RICHMOND Popular Fits: all 2005 Escalade engines 3800061
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Kit
Fitment notes — RICHMOND 3800061
Kit
RearGM 8.5"/8.625"
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 12471330
🇺🇸 US 🇨🇦 CA
IF REPL OEM CAST IRON SHIM,Order with DIFF BEARING SHIM KIT8.50/8.625 Ring Gear Saginaw - American Axle
Fitment notes — GM GENUINE 12471330
IF REPL OEM CAST IRON SHIM,Order with DIFF BEARING SHIM KIT8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential4.37-4.32mm Thick
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 12471368
🇺🇸 US 🇨🇦 CA
Rear Axle8.50/8.625 Ring Gear Saginaw - American Axle
Fitment notes — GM GENUINE 12471368
Rear Axle8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential2.438-2.540MM RANGE
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 12471362
🇺🇸 US 🇨🇦 CA
Rear Axle8.50/8.625 Ring Gear Saginaw - American Axle
Fitment notes — GM GENUINE 12471362
Rear Axle8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential1.016-1.118MM RANGE
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 12471363
🇺🇸 US 🇨🇦 CA
Rear Axle8.50/8.625 Ring Gear Saginaw - American Axle
Fitment notes — GM GENUINE 12471363
Rear Axle8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential1.168-1.372MM RANGE
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 12471364
🇺🇸 US 🇨🇦 CA
Rear Axle8.50/8.625 Ring Gear Saginaw - American Axle
Fitment notes — GM GENUINE 12471364
Rear Axle8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential1.422-1.626MM RANGE
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines GM10MSK
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Differential Carrier Shim Kit or Differential Carrier and pinion shim Kit
Fitment notes — MOTIVE GEAR GM10MSK
Differential Carrier Shim Kit or Differential Carrier and pinion shim Kit
RearGM 8.5"/8.625"
View on
Amazon
RICHMOND Fits: all 2005 Escalade engines 3800071
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Kit
Fitment notes — RICHMOND 3800071
Kit
RearFor Cast Iron Corvette, Ford 8.8" IFS, 8.8", GM 8", 8.5", 8.6" IRS, 8.625", 8.875"
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA55002
🇺🇸 US
Super Carrier Shim Kit
Fitment notes — USA STANDARD GEAR USA55002
Super Carrier Shim Kit
Rear DifferentialGM 8.6"Carrier shim KitInterlocking design3.035" OD
Rear DifferentialEscalade Base ModelGM 8.6"Carrier shim KitInterlocking design3.035" OD
View on
Amazon

This table covers the Differential Carrier shims.

Differential Clutch Guide

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Fits: all 2005 Escalade engines USA33352
🇺🇸 US
Trac Loc Guide
Fitment notes — USA STANDARD GEAR USA33352
Trac Loc Guide
Rear DifferentialGM 8.6"For Posilock
Rear DifferentialEscalade Base ModelGM 8.6"For Posilock
View on
Amazon

This table covers the Differential Clutch guides.

Differential Clutch Pack

Brand Part Number Markets Notes Buy
GM GENUINE Fits: all 2005 Escalade engines 12471404
🇺🇸 US 🇨🇦 CA
LeftPositraction Limited-Slip Rear Axle (G80),8.50/8.625 Ring Gear Saginaw - American Axle
Fitment notes — GM GENUINE 12471404
LeftPositraction Limited-Slip Rear Axle (G80),8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt DifferentialEATON EDS- 29534 INCLUDES WASHER, DISCS AND GUIDE
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 26045829
🇺🇸 US 🇨🇦 CA
RightPositraction Limited-Slip Rear Axle (G80),8.50/8.625 Ring Gear Saginaw - American Axle
Fitment notes — GM GENUINE 26045829
RightPositraction Limited-Slip Rear Axle (G80),8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt DifferentialEATON EDS-29996
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA16041
🇺🇸 US
Yukon Dura GripCompatible with Dura Grip or Eaton Positractions, not Factory
Fitment notes — USA STANDARD GEAR USA16041
Yukon Dura GripCompatible with Dura Grip or Eaton Positractions, not Factory
RearGM 8.6"14 Carbon ClutchesFits / Eaton Positractions
RearEscalade Base ModelGM 8.6"14 Carbon ClutchesFits / Eaton Positractions
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA16110
🇺🇸 US
Spider Gear
Fitment notes — USA STANDARD GEAR USA16110
Spider Gear
RearGM 8.6"18 Steel Clutches
RearEscalade Base ModelGM 8.6"18 Steel Clutches
View on
Amazon

This table covers the clutch packs in a limited-slip or locking differential.

Differential Clutch Pack Clip

Brand Part Number Markets Notes Buy
GM GENUINE Fits: all 2005 Escalade engines 15599623
🇺🇸 US 🇨🇦 CA
Differential Guide Clip
Fitment notes — GM GENUINE 15599623
Differential Guide Clip
Width .93"Positraction Limited-Slip Rear Axle (G80)8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt DifferentialFlange Side
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 12471533
🇺🇸 US 🇨🇦 CA
Width .51"Positraction Limited-Slip Rear Axle (G80),8.50/8.625 Ring Gear Saginaw - American Axle
Fitment notes — GM GENUINE 12471533
Width .51"Positraction Limited-Slip Rear Axle (G80),8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt DifferentialBell Side
View on
Amazon

This table covers the Differential Clutch Pack clips.

Differential Cover

Brand Part Number Markets Notes Buy
ATP Popular Fits: all 2005 Escalade engines 111107
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes Gasket and Internal Magnet
Fitment notes — ATP 111107
Includes Gasket and Internal Magnet
with 8.50" Or 8.625" Ring Gearwith Drain Plug
View on
Amazon
DORMAN Popular Fits: all 2005 Escalade engines 697706
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear8.5" Ring Gear
Fitment notes — DORMAN 697706
Rear8.5" Ring Gear8.625" Ring Gear
View on
Amazon
SKP Popular Fits: all 2005 Escalade engines SK697706
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear8.5" Ring Gear
Fitment notes — SKP SK697706
Rear8.5" Ring Gear8.625" Ring Gear
View on
Amazon
AAM Fits: all 2005 Escalade engines 40027020
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rearwith 10 Bolt Cover
Fitment notes — AAM 40027020
Rearwith 10 Bolt Coverwithout Fill Plug In Cover
View on
Amazon
AAM Fits: all 2005 Escalade engines 40039162
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rearwith 8.6 (In) Axle
Fitment notes — AAM 40039162
Rearwith 8.6 (In) Axlewith Magnet Onlywith Fill Plug In Cover
View on
Amazon
AAM Fits: all 2005 Escalade engines 74030007
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rearwith 10 Bolt Cover
Fitment notes — AAM 74030007
Rearwith 10 Bolt Coverwith Fill Plug In Cover
View on
Amazon
DORMAN Fits: all 2005 Escalade engines 697711
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear3/4 Ton
Fitment notes — DORMAN 697711
Rear3/4 Ton9.5" Ring Gear
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 19542185
🇺🇸 US 🇨🇦 CA
Rearwith Drain Fill Plug, Gasket, and Bolts
Fitment notes — GM GENUINE 19542185
Rearwith Drain Fill Plug, Gasket, and Bolts8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential
View on
Amazon
SKP Fits: all 2005 Escalade engines SK697711
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Rear3/4 Ton
Fitment notes — SKP SK697711
Fits:
Rear3/4 Ton
or:
Rear9.5" Ring Gear
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA32017
🇺🇸 US
Chrome
Fitment notes — USA STANDARD GEAR USA32017
Chrome
RearGM 8.6"
RearEscalade Base ModelGM 8.6"
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA32332
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearGM 8.5"/ 8.6" Rear
Fitment notes — USA STANDARD GEAR USA32332
RearGM 8.5"/ 8.6" RearStamped Steel Cover
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA32030
🇺🇸 US
Polished Aluminum
Fitment notes — USA STANDARD GEAR USA32030
Polished Aluminum
RearGM 8.6"FinnedRequires Metric M8 x 1.25 Bolts
RearEscalade Base ModelGM 8.6"FinnedRequires Metric M8 x 1.25 Bolts
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA29114
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Yukon HardcoreNodular Iron
Fitment notes — USA STANDARD GEAR USA29114
Yukon HardcoreNodular IronIncludes 8mm Cover Bolts, Magnetic Drain and Fill Plug
RearGM 8.5"/ 8.6" Rear10 Bolt
View on
Amazon

This table covers the Differential covers.

Differential Cover Bolt

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Popular Fits: all 2005 Escalade engines USA33572
🇺🇸 US
22.5mm longMetric M8 x 1.25 thread
Fitment notes — USA STANDARD GEAR USA33572
22.5mm longMetric M8 x 1.25 thread
RearGM 8.6"M8X1.25
RearEscalade Base ModelGM 8.6"M8X1.25
View on
Amazon
AAM Fits: all 2005 Escalade engines 40019486
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rearwith 14 Bolt Cover
Fitment notes — AAM 40019486
Rearwith 14 Bolt Coverwith 10.5 (In) Rear Axle
View on
Amazon
AAM Fits: all 2005 Escalade engines 4000216910
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
Fitment notes — AAM 4000216910
Set
Fits:
with 9.5 (In) Rear Axl
or:
with 10.5 (In) Rear Axle
or:
Rearwith 8.6 (In) Axle
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 12471307
🇺🇸 US 🇨🇦 CA
RearM8X1.25X22.6,19.2THD
Fitment notes — GM GENUINE 12471307
RearM8X1.25X22.6,19.2THDExcept Mexican (P96)8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential13 Driver Size
Fits:
RearRWDM8X1.25X22.6,19.2THDExc. Positraction Limited-Slip Rear Axle (G80)7200# Power BRAKES(JH2)13 DRIVER SIZE3.73 Rear Axle Ratio (GT4),Active Brake Control (JL4),9.50 Ring Gear Saginaw - American Axle
or:
RearM8X1.25X22.6,19.2THDExcept Mexican (P96)8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential13 Driver Size
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA33569
🇺🇸 US
FrontAWD
Fitment notes — USA STANDARD GEAR USA33569
FrontAWDGM 8.25"IFSHousing Case Bolt with Washer
FrontAWDEscalade Base ModelGM 8.25"IFSHousing Case Bolt with Washer
View on
Amazon

This table covers the Differential Cover bolts.

Differential Cover Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: all 2005 Escalade engines RDS550281
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rearwith 8.625 (In) Ring Gear
Fitment notes — FEL-PRO RDS550281
Rearwith 8.625 (In) Ring Gearwith AAM Differentialwith 10 Bolt HolesPaper GasketAxle Housing Cover
View on
Amazon
FEL-PRO Popular Fits: all 2005 Escalade engines RDS55387
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rearwith 9.5 (In) Ring Gear
Fitment notes — FEL-PRO RDS55387
Rearwith 9.5 (In) Ring Gearwith AAM Differentialwith 14 Bolt HolesAxle Housing Cover
View on
Amazon
GM GENUINE Popular Fits: all 2005 Escalade engines 15807693
🇺🇸 US 🇨🇦 CA
Rear8.50/8.625 Ring Gear Saginaw - American Axle
Fitment notes — GM GENUINE 15807693
Rear8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential10 Bolt HolesAxle Housing Cover
View on
Amazon
AAM Fits: all 2005 Escalade engines 40018901
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with 8.6 (In) Rear AxleAxle Housing Cover
View on
Amazon
DORMAN Fits: all 2005 Escalade engines 926050
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes Bolts
Fitment notes — DORMAN 926050
Includes Bolts
Rear10 Bolt Differential Cover8.5" or 8.625" Ring Gear
View on
Amazon
ELRING Fits: all 2005 Escalade engines 782050
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Number of Mounting Bores: 10
Fitment notes — ELRING 782050
Number of Mounting Bores: 10
RearAxle Housing Cover
Fits:
Escalade Base ModelRearAxle Housing Cover
or:
RearEscalade ESV or Escalade EXTAxle Housing Cover
View on
Amazon
FEL-PRO Fits: all 2005 Escalade engines RDS55477
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Frontwith Independent Front Suspension
Fitment notes — FEL-PRO RDS55477
Frontwith Independent Front Suspensionwith 8.25 (In) Ring Gearwith AAM DifferentialAxle Housing Cover
View on
Amazon
GM GENUINE Fits: 6.0L V8 26063649
🇺🇸 US 🇨🇦 CA
RearRWD
Fitment notes — GM GENUINE 26063649
RearRWDExc. Positraction Limited-Slip Rear Axle (G80)7200# Power Brakes(JH2)14 Bolt Holes3.73 Rear Axle Ratio (GT4),Active Brake Control (JL4),9.50 Ring Gear Saginaw - American AxleAxle Housing Cover
View on
Amazon
MAHLE / CLEVITE Fits: all 2005 Escalade engines P33285
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Axle Housing Cover GasketMolded Rubber
Fitment notes — MAHLE / CLEVITE P33285
Axle Housing Cover GasketMolded Rubber
FrontAxle Housing Cover
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines 3993593
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearGM 8.5"/8.625" (10 Bolt)
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA23020
🇺🇸 US
Differential Gasket
Fitment notes — USA STANDARD GEAR USA23020
Differential Gasket
RearGM 8.6"
RearEscalade Base ModelGM 8.6"
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA23030
🇺🇸 US
Differential Case Gasket
Fitment notes — USA STANDARD GEAR USA23030
Differential Case Gasket
FrontAWDGM 8.25"IFS
FrontAWDEscalade Base ModelGM 8.25"IFS
View on
Amazon
VICTOR REINZ Fits: all 2005 Escalade engines 711483400
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Cork
Fitment notes — VICTOR REINZ 711483400
Cork
Rearwith AAM 9.5 Axle(s)with 14 Bolt HolesAxle Housing Cover
View on
Amazon
VICTOR REINZ Fits: all 2005 Escalade engines 711482200
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rearwith 8.625 IN Ring Gear
Fitment notes — VICTOR REINZ 711482200
Rearwith 8.625 IN Ring Gearwith Engine Code AAM10 BoltAxle Housing Cover
View on
Amazon
VICTOR REINZ Fits: all 2005 Escalade engines 711485200
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Frontwith 8.250 IN Ring Gear
Fitment notes — VICTOR REINZ 711485200
Frontwith 8.250 IN Ring Gearwith Engine Code AAM10 Boltwith Independent Front SuspensionAxle Housing Cover
View on
Amazon

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Differential Cross Pin

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: all 2005 Escalade engines 84526162
🇺🇸 US 🇨🇦 CA
FrontAWD
View on
Amazon
GM GENUINE Popular Fits: all 2005 Escalade engines 84565109
🇺🇸 US 🇨🇦 CA
Except Mexican (P96)8.50/8.625 Ring Gear Saginaw - American Axle
Fitment notes — GM GENUINE 84565109
Except Mexican (P96)8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential
View on
Amazon
AAM Fits: all 2005 Escalade engines 40048063
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Frontwith 10 Bolt Cover
Fitment notes — AAM 40048063
Fits:
Frontwith 10 Bolt Coverwith 8.25 (In) Front Axle
or:
Rearwith 10 Bolt Coverwith 8.6 (In) Rear Axle
Fits:
Rearwith 10 Bolt Coverwith 8.6 (In) Rear Axle
or:
FrontEscalade Base Modelwith 10 Bolt Coverwith 8.25 (In) Front Axle
View on
Amazon
GM GENUINE Fits: 6.0L V8 14012700
🇺🇸 US 🇨🇦 CA
RWDExc. Positraction Limited-Slip Rear Axle (G80)
Fitment notes — GM GENUINE 14012700
RWDExc. Positraction Limited-Slip Rear Axle (G80)7200lb Power Brakes(JH2)148.0 mm3.73 Rear Axle Ratio (GT4),Active Brake Control (JL4),9.50 Ring Gear Saginaw - American Axle
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines 14006401
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Differential Pinion Shaft
Fitment notes — MOTIVE GEAR 14006401
Differential Pinion Shaft
RearGM 8.5"/8.625" (10 Bolt)
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines 14012700
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Differential Pinion Shaft
Fitment notes — MOTIVE GEAR 14012700
Differential Pinion Shaft
FrontAWDChrysler 9.25", GM 9.25" IFS, 9.5"
View on
Amazon
RICHMOND Fits: all 2005 Escalade engines CSPGM85
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Differential Pinion Shaft
Fitment notes — RICHMOND CSPGM85
Differential Pinion Shaft
RearGM 8.5"/8.625" (10 Bolt)Notched To Clearance High Numeric Ratios
View on
Amazon
RICHMOND Fits: all 2005 Escalade engines XL5640
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
EXCelDifferential Pinion Shaft
Fitment notes — RICHMOND XL5640
EXCelDifferential Pinion Shaft
RearFor GM 8.5"/8.625" (10 Bolt)
View on
Amazon
RICHMOND Fits: all 2005 Escalade engines 8002721
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Differential Pinion Shaft
Fitment notes — RICHMOND 8002721
Differential Pinion Shaft
RearGM 8.5"/8.625" (10 Bolt)
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA33401
🇺🇸 US
FrontAWD
Fitment notes — USA STANDARD GEAR USA33401
FrontAWDGM 8.25"IFSStandard Open0.795" DiameterFits Some Eaton Positractions
FrontAWDEscalade Base ModelGM 8.25"IFSStandard Open0.795" DiameterFits Some Eaton Positractions
View on
Amazon

This table covers the Differential Cross pins.

Differential Crush Sleeve

Brand Part Number Markets Notes Buy
RICHMOND Popular Fits: all 2005 Escalade engines 1900041
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits RearGM 8.25" IFS, 8.5"/8.625"or Front
Fitment notes — RICHMOND 1900041
Fits:
RearGM 8.25" IFS, 8.5"/8.625"or FrontAWDGM 8.25" IFS, 8.5"/8.625"
View on
Amazon
USA STANDARD GEAR Popular Fits: all 2005 Escalade engines USA33097
🇺🇸 US
RearGM 8.6"
Fitment notes — USA STANDARD GEAR USA33097
RearGM 8.6"
RearEscalade Base ModelGM 8.6"
View on
Amazon
AAM Fits: all 2005 Escalade engines 26008741
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with 14 Bolt Coverwith 10.5 (In) Rear Axle
Fitment notes — AAM 26008741
with 14 Bolt Coverwith 10.5 (In) Rear Axle
Fits:
Escalade Base Model or Escalade EXTwith 14 Bolt Coverwith 10.5 (In) Rear Axl
or:
Escalade ESVwith 14 Bolt Holeswith 10.5 (In) Rear Axle
View on
Amazon
AAM Fits: all 2005 Escalade engines 400103551
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear
Fitment notes — AAM 400103551
Rear
Fits:
Rearor Escalade ESV or Escalade EXT
View on
Amazon
DORMAN Fits: all 2005 Escalade engines 81057
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Pinion Crush Sleeves
Fitment notes — DORMAN 81057
Pinion Crush Sleeves
Rear8.5" To 8.75 In. Ring Gear
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA33109
🇺🇸 US
FrontAWD
Fitment notes — USA STANDARD GEAR USA33109
FrontAWDGM 8.25"IFS
FrontAWDEscalade Base ModelGM 8.25"IFS
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA55048
🇺🇸 US
RearGM 8.6"
Fitment notes — USA STANDARD GEAR USA55048
RearGM 8.6"Solid
RearEscalade Base ModelGM 8.6"Solid
View on
Amazon

This table covers the Differential Crush sleeves.

Differential Fill / Drain Plug

Brand Part Number Markets Notes Buy
AAM Fits: all 2005 Escalade engines 40007601
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with 8.6 (In) Rear Axle
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 92230583
🇺🇸 US 🇨🇦 CA
Rear DifferentialSquare Head with Washer with Magnet
Fitment notes — GM GENUINE 92230583
Rear DifferentialSquare Head with Washer with MagnetNo Zinc CoatingM20X1.5X16,29 OD8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential
Fits:
Rear DifferentialSquare Head with Washer with MagnetNo Zinc CoatingM20X1.5X16,29 OD8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential
or:
RearRWDSquare Head with Washer with MagnetNo Zinc CoatingM20X1.5X1629 ODHybrid Axle (AXN), 3.73 Rear Axle Ratio (GT4), Active Brake Control (JL4), 9.50 Ring Gear Saginaw - American AxleExc. Positraction Limited-Slip Rear Axle (G80)7200# Power Brakes(JH2)
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 12471479
🇺🇸 US 🇨🇦 CA
Rear DifferentialM20X1.5
Fitment notes — GM GENUINE 12471479
Rear DifferentialM20X1.58.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential21mm Long
Fits:
Rear DifferentialM20X1.58.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential21mm Long
or:
Rear DifferentialRWDM20X1.5Exc. Positraction Limited-Slip Rear Axle (G80)7200# Power Brakes(JH2)21mm Long3.73 Rear Axle Ratio (GT4),Active Brake Control (JL4),9.50 Ring Gear Saginaw - American Axle
View on
Amazon

This table covers the Differential Fill drain plugs.

Differential Gear Installation Kit

Brand Part Number Markets Notes Buy
RICHMOND Popular Fits: all 2005 Escalade engines 831026B
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Install Kit Includes Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
Fitment notes — RICHMOND 831026B
Install Kit Includes Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
Rear AxleGM 8.5"/8.625" (10 Bolt)
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines GM85IKL
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Differential Gear Install Kit
Fitment notes — MOTIVE GEAR GM85IKL
Differential Gear Install Kit
Rear AxleGM 8.5" (10 Bolt)
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines GM82IKFL
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Differential Gear Install Kit
Fitment notes — MOTIVE GEAR GM82IKFL
Differential Gear Install Kit
Front AxleAWDGM 8.25" IFS
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA12053
🇺🇸 US
Minor Differential Install KitIncludes Pinion Seal, Crush Sleeve if Applicable, Complete Shim Kit, Marking Compound, Brush
Fitment notes — USA STANDARD GEAR USA12053
Minor Differential Install KitIncludes Pinion Seal, Crush Sleeve if Applicable, Complete Shim Kit, Marking Compound, Brush
FrontAWDGM 8.25"IFS
FrontAWDEscalade Base ModelGM 8.25"IFS
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA12059
🇺🇸 US
Minor Differential Install KitIncludes Pinion Seal, Crush Sleeve if Applicable, Complete Shim Kit with Super Shims, Marking Compound, Brush
Fitment notes — USA STANDARD GEAR USA12059
Minor Differential Install KitIncludes Pinion Seal, Crush Sleeve if Applicable, Complete Shim Kit with Super Shims, Marking Compound, Brush
RearGM 8.6"
RearEscalade Base ModelGM 8.6"
View on
Amazon

This table covers the Differential Gear Installation kits.

Differential Housing Bolt

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Fits: 6.0L V8 USA32271
🇺🇸 US
Differential Bearing Retainer Stud Kit
Fitment notes — USA STANDARD GEAR USA32271
Differential Bearing Retainer Stud Kit
Escalade ESV or Escalade EXTGM 7.5"7.625 N.8.5"12P12T, Main Cap Stud Kit
View on
Amazon

This table covers the Differential Housing bolts.

Differential Lock Actuator

Brand Part Number Markets Notes Buy
GM GENUINE Fits: all 2005 Escalade engines 12471530
🇺🇸 US 🇨🇦 CA
Includes Bracket
Fitment notes — GM GENUINE 12471530
Includes Bracket
Positraction Limited-Slip Rear Axle (G80),8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt DifferentialEaton EDS-29672Notched Weight
View on
Amazon

This table covers the Differential Lock actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.

Differential Lock Plate

Brand Part Number Markets Notes Buy
GM GENUINE Fits: all 2005 Escalade engines 12471406
🇺🇸 US 🇨🇦 CA
Positraction Limited-Slip Rear Axle (G80),8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential
Fitment notes — GM GENUINE 12471406
Positraction Limited-Slip Rear Axle (G80),8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt DifferentialEATON EDS-89096
View on
Amazon

This table covers the Differential Lock plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts.

Differential Lock Spring

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Fits: all 2005 Escalade engines SLSPRINGSM
🇺🇸 US
Differential Locker Rebuild KitSpartan Locker
Fitment notes — USA STANDARD GEAR SLSPRINGSM
Differential Locker Rebuild KitSpartan Locker
RearGM 8.6"Spartan Locker Spring and Pin Kit
RearEscalade Base ModelGM 8.6"Spartan Locker Spring and Pin Kit
View on
Amazon

This table covers the Differential Lock springs. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.

Differential Lock Thrust Block

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: all 2005 Escalade engines 12471397
🇺🇸 US 🇨🇦 CA
Positraction Limited-Slip Rear Axle (G80), 8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential
Fitment notes — GM GENUINE 12471397
Positraction Limited-Slip Rear Axle (G80), 8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt DifferentialOrange1.338 Thick
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 12471395
🇺🇸 US 🇨🇦 CA
Positraction Limited-Slip Rear Axle (G80), 8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential
Fitment notes — GM GENUINE 12471395
Positraction Limited-Slip Rear Axle (G80), 8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt DifferentialBrown1.330 Thick
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 12471393
🇺🇸 US 🇨🇦 CA
PurplePositraction Limited-Slip Rear Axle (G80),8.50/8.625 Ring Gear Saginaw - American Axle
Fitment notes — GM GENUINE 12471393
PurplePositraction Limited-Slip Rear Axle (G80),8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential1.322 Thick
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 12471394
🇺🇸 US 🇨🇦 CA
WhitePositraction Limited-Slip Rear Axle (G80),8.50/8.625 Ring Gear Saginaw - American Axle
Fitment notes — GM GENUINE 12471394
WhitePositraction Limited-Slip Rear Axle (G80),8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential1.326 Thick
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 12471396
🇺🇸 US 🇨🇦 CA
YellowPositraction Limited-Slip Rear Axle (G80), 8.50/8.625 Ring Gear Saginaw - American Axle
Fitment notes — GM GENUINE 12471396
YellowPositraction Limited-Slip Rear Axle (G80), 8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential1.334 Thick
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 12471398
🇺🇸 US 🇨🇦 CA
Positraction Limited-Slip Rear Axle (G80), 8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential
Fitment notes — GM GENUINE 12471398
Positraction Limited-Slip Rear Axle (G80), 8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt DifferentialPink1.342 Thick
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 12471399
🇺🇸 US 🇨🇦 CA
Positraction Limited-Slip Rear Axle (G80), 8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential
Fitment notes — GM GENUINE 12471399
Positraction Limited-Slip Rear Axle (G80), 8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt DifferentialGreen1.346 Thick
View on
Amazon

This table covers the thrust blocks in a locking differential.

Differential Pinion Bearing / Race

Economy

Brand Part Number Markets Notes Buy
WJB / INMOTION PARTS Popular Fits: all 2005 Escalade engines WTM88048
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Bearing Shape: Cylindrical
Fitment notes — WJB / INMOTION PARTS WTM88048
Bearing Shape: Cylindrical
Fits:
Rear Outerwith AAM Axlewith 8.625 IN Ring Gear
or:
Front OuterAWDIndependent Front Suspensionwith AAM Axlewith 8.25 IN Ring Gear
View on
Amazon
WJB / INMOTION PARTS Popular Fits: all 2005 Escalade engines WTM802048
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Bearing Shape: Cylindrical
Fitment notes — WJB / INMOTION PARTS WTM802048
Bearing Shape: Cylindrical
Fits:
Rear Innerwith AAM Axlewith 8.625 IN Ring Gear
or:
Front InnerAWDIndependent Front Suspensionwith AAM Axlewith 8.25 IN Ring Gear
View on
Amazon
FAMOUS BRAND Fits: all 2005 Escalade engines SM802011
🇺🇸 US 🇨🇦 CA
Fits FrontInner
Fitment notes — FAMOUS BRAND SM802011
Fits:
FrontInnerAAMIndependent Front Suspension8.25" Ring Gear
or:
RearInnerAAM8.625" R.G.
View on
Amazon
FAMOUS BRAND Fits: all 2005 Escalade engines SM88010
🇺🇸 US 🇨🇦 CA
Fits FrontOUTER
Fitment notes — FAMOUS BRAND SM88010
Fits:
FrontOUTERCUP BORE 2.68"CUP LENGTH .687"1ST DESIGN
or:
RearOuterCup Bore 2.68"Cup Length .687", 8.625" Ring Gear1st Design
View on
Amazon
FAMOUS BRAND Fits: all 2005 Escalade engines SM802048
🇺🇸 US 🇨🇦 CA
Fits FrontInner
Fitment notes — FAMOUS BRAND SM802048
Fits:
FrontInnerAAMIndependent Front Suspension8.25" Ring Gear
or:
RearInnerAAM8.625" R.G.
View on
Amazon
ULTRA-POWER Fits: all 2005 Escalade engines WTM88048
🇺🇸 US 🇨🇦 CA
Fits RearOUTER
Fitment notes — ULTRA-POWER WTM88048
Fits:
RearOUTERAAM AXLE8.625" RING GEAR
or:
FrontOuterIndependent Front SuspensionAAM Axle8.25" Ring Gear4WD/AWD
View on
Amazon
ULTRA-POWER Fits: all 2005 Escalade engines WTM802048
🇺🇸 US 🇨🇦 CA
Fits RearINNER
Fitment notes — ULTRA-POWER WTM802048
Fits:
RearINNERAAM AXLE8.625" RING GEAR
or:
FrontInnerIndependent Front SuspensionAAM Axle8.25" Ring Gear4WD/AWD
View on
Amazon
WJB / INMOTION PARTS Fits: all 2005 Escalade engines WTM802011
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race
Fitment notes — WJB / INMOTION PARTS WTM802011
Race
Fits:
Rear Innerwith AAM Differentialwith 8.625 IN Ring Gear
or:
Front InnerAWDIndependent Front Suspensionwith AAM Differentialwith 8.25 IN Ring Gear
View on
Amazon
WJB / INMOTION PARTS Fits: all 2005 Escalade engines WTM88010
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RaceCup Outside Diameter (In): 2.6880000000000002 In
Fitment notes — WJB / INMOTION PARTS WTM88010
RaceCup Outside Diameter (In): 2.6880000000000002 In
Fits:
Rear Outerwith AAM Differentialwith 8.625 IN Ring Gear
or:
Front OuterAWDIndependent Front Suspensionwith AAM Differentialwith 8.25 IN Ring Gear
View on
Amazon
WJB / INMOTION PARTS Fits: all 2005 Escalade engines WTNP926068
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race
Fitment notes — WJB / INMOTION PARTS WTNP926068
Race
Front Innerwith 8.25 Ring Gear
Fits:
Rear Innerwith 8.50 Ring Gear
or:
Front Innerwith 8.25 Ring Gear
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
BCA Popular Fits: all 2005 Escalade engines NBM802048
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Bearing Shape: Cylindrical
Fitment notes — BCA NBM802048
Bearing Shape: Cylindrical
Fits:
Rear Innerwith AAM Axle(s)with 8.625 IN Ring Gear
or:
Front InnerAWDwith AAM Axle(s)with 8.25 IN Ring Gearwith Independent Front Suspension
View on
Amazon
SKF Popular Fits: all 2005 Escalade engines BR52
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Rear Outerwith 8.50 Ring Gear
Fitment notes — SKF BR52
Fits:
Rear Outerwith 8.50 Ring Gear
or:
Front Outerwith 8.25 Ring Gear
View on
Amazon
TIMKEN Popular Fits: all 2005 Escalade engines M88010
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race
Fitment notes — TIMKEN M88010
Race
Fits:
Front OuterAWD
or:
Rear Outer8.625" Ring Gear
View on
Amazon
TIMKEN Popular Fits: all 2005 Escalade engines M88048
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Front OuterAWD
Fitment notes — TIMKEN M88048
Fits:
Front OuterAWD
or:
Rear Outer8.625" Ring Gear
View on
Amazon
BCA Fits: all 2005 Escalade engines NBM88010
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race
Fitment notes — BCA NBM88010
Race
Fits:
Rear Outerwith 8.625 IN Ring Gearwith AAM Differential
or:
Front OuterAWDwith 8.25 IN Ring Gearwith AAM Differentialwith Independent Front Suspension
View on
Amazon
BCA Fits: all 2005 Escalade engines NBM802011
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race
Fitment notes — BCA NBM802011
Race
Fits:
Rear Innerwith 8.625 IN Ring Gearwith AAM Differential
or:
Front InnerAWDwith 8.25 IN Ring Gearwith AAM Differentialwith Independent Front Suspension
View on
Amazon
BCA Fits: all 2005 Escalade engines NBM88048
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Bearing Shape: Cylindrical
Fitment notes — BCA NBM88048
Bearing Shape: Cylindrical
Fits:
Rear Outerwith AAM Axle(s)with 8.625 IN Ring Gear
or:
Front OuterAWDwith AAM Axle(s)with 8.25 IN Ring Gearwith Independent Front Suspension
View on
Amazon
BCA Fits: all 2005 Escalade engines NBBR52
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Bearing & Race
Fitment notes — BCA NBBR52
Bearing & Race
Fits:
Rear Outerwith AAM Axle(s)with 8.625 IN Ring Gear
or:
Front OuterAWDwith AAM Axle(s)with 8.25 IN Ring Gearwith Independent Front Suspension
View on
Amazon
BCA Fits: all 2005 Escalade engines NBNP099285
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race
Fitment notes — BCA NBNP099285
Race
Fits:
Front InnerAWDwith 8.6 IN Ring Gear
or:
Rear InnerAWDwith 8.6 IN Ring Gear
Fits:
Front InnerEscalade ESV or Escalade EXT
or:
Front InnerAWDEscalade Base Modelwith 8.6 IN Ring Gear
or:
Rear InnerAWDEscalade Base Modelwith 8.6 IN Ring Gear
View on
Amazon
BCA Fits: all 2005 Escalade engines NBNP544520
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear Innerwith 8.6 IN Ring Gear
Fitment notes — BCA NBNP544520
Rear Innerwith 8.6 IN Ring Gear
Fits:
Front InnerEscalade ESV or Escalade EXT
or:
Rear InnerEscalade Base Modelwith 8.6 IN Ring Gear
View on
Amazon
DANA Fits: all 2005 Escalade engines 706045X
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Spicer
Fitment notes — DANA 706045X
Spicer
Rear Outerwith Dana 60 Axlewith Four Wheel Steering
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 09413427
🇺🇸 US 🇨🇦 CA
Fits Outerwith Cup
Fitment notes — GM GENUINE 09413427
Fits:
Outerwith Cup8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential
or:
Front OuterAWDwith CupFront AxleTimken, M88048-M88010, 1-5/16 In ID X 2-11/16 In OD X 7/8 In THK, Rear AXL
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines S1420
🇺🇸 US 🇨🇦 CA
Fits Inner8.50/8.625 Ring Gear Saginaw - American Axle
Fitment notes — GM GENUINE S1420
Fits:
Inner8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential
or:
Front InnerInner Bearing8.25" Axle
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines S604
🇺🇸 US 🇨🇦 CA
Includes Cup and Cone
Fitment notes — GM GENUINE S604
Includes Cup and Cone
Fits:
OuterRWD1-3/8 In ID X 2-27/32 In OD X 1 In Thick9.50 Ring Gear Saginaw - American Axle2.84
or:
Front OuterAWD1-3/8 In ID X 2-27/32 In OD X 1 In Thick2.84
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines S37
🇺🇸 US 🇨🇦 CA
Includes Cup and Cone1 7/8" Inner Diameter X 3-3/4" Outer Diameter X 1 3/16" Thick
Fitment notes — GM GENUINE S37
Includes Cup and Cone1 7/8" Inner Diameter X 3-3/4" Outer Diameter X 1 3/16" Thick
InnerRWDTimken, HM804846-HM804810, 1-7/8 In Inside Diameter X 3-3/4 In Outside Diameter X 1-3/16 In Thick9.50 Ring Gear Saginaw - American Axle
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines 706045XR
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Koyo Bearings
Fitment notes — MOTIVE GEAR 706045XR
Koyo Bearings
Rear OuterDana 60 Differential
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines 706016XR
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Koyo Bearings
Fitment notes — MOTIVE GEAR 706016XR
Koyo Bearings
Fits:
FrontAWDGM 8.25" IFS
or:
RearGM 8.5"/8.625"
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines R10RLPK
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
KitKoyo Bearings
Fitment notes — MOTIVE GEAR R10RLPK
KitKoyo Bearings
RearGM 8.5"/8.625" (10 Bolt)
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines R10RLTPK
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Pinion Bearing Kit Includes Timken Pinion Bearings, Brush, Crush Sleeve, Marking Compound, Pinion Nut, Pinion Seal, Pinion Shims, and Thread Locking Compound
Fitment notes — MOTIVE GEAR R10RLTPK
Pinion Bearing Kit Includes Timken Pinion Bearings, Brush, Crush Sleeve, Marking Compound, Pinion Nut, Pinion Seal, Pinion Shims, and Thread Locking Compound
RearGM 8.5"/8.625" (10 Bolt)
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines R82RIFSLPK
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
KitKoyo Bearings
Fitment notes — MOTIVE GEAR R82RIFSLPK
KitKoyo Bearings
FrontAWDGM 8.25" IFS
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines R82RIFSLTPK
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Pinion Bearing Kit Includes Timken Pinion Bearings, Brush, Crush Sleeve, Marking Compound, Pinion Nut, Pinion Seal, Pinion Shims, and Thread Locking Compound
Fitment notes — MOTIVE GEAR R82RIFSLTPK
Pinion Bearing Kit Includes Timken Pinion Bearings, Brush, Crush Sleeve, Marking Compound, Pinion Nut, Pinion Seal, Pinion Shims, and Thread Locking Compound
FrontAWDGM 8.25" IFS
View on
Amazon
NATIONAL Fits: all 2005 Escalade engines M88010
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Taper Bearing Cup
Fitment notes — NATIONAL M88010
Taper Bearing Cup
Fits:
Rear Outerwith 8.625 IN Ring Gearwith AAM Differential
or:
Front OuterAWDwith 8.25 IN Ring Gearwith AAM DifferentialIndependent front suspension
View on
Amazon
NATIONAL Fits: all 2005 Escalade engines M802011
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Taper Bearing Cup
Fitment notes — NATIONAL M802011
Taper Bearing Cup
Fits:
Rear Innerwith 8.625 IN Ring Gearwith AAM Differential
or:
Front InnerAWDwith 8.25 IN Ring Gearwith AAM DifferentialIndependent front suspension
View on
Amazon
SCHAEFFLER Fits: all 2005 Escalade engines M88010
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race
Fitment notes — SCHAEFFLER M88010
Race
Fits:
Front Outerwith 8.25 In Ring Gear17.462 mm Width68.262 mm Outside Diameter
or:
Rear Outerwith 8.50 In Ring Gear or with 8.625 In Ring Gear17.462 mm Width68.262 mm Outside Diameter
Fits:
Front OuterEscalade Base Modelwith 8.25 In Ring Gear17.462 mm Width68.262 mm Outside Diameter
or:
Rear OuterEscalade Base Modelwith 8.50 In Ring Gearwith 8.625 In Ring Gear17.462 mm Width68.262 mm Outside Diameter
or:
Rear OuterEscalade ESVwith 8.625 In Ring Gear17.462 mm Width68.262 mm Outside Diameter
View on
Amazon
SCHAEFFLER Fits: all 2005 Escalade engines M802011
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race
Fitment notes — SCHAEFFLER M802011
Race
Fits:
Rear Innerwith 8.625 In Ring Gear20.193 mm Width82.55 mm Outside Diameter
or:
Front Innerwith 8.25 In Ring Gear20.193 mm Width82.55 mm Outside Diameter
Fits:
Front InnerEscalade Base Modelwith 8.25 In Ring Gear20.193 mm Width82.55 mm Outside Diameter
or:
Rear InnerEscalade Base Model or Escalade ESVwith 8.625 In Ring Gear20.193 mm Width82.55 mm Outside Diameter
View on
Amazon
SCHAEFFLER Fits: all 2005 Escalade engines KM802048
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Front Inner8.25" Ring Gear
Fitment notes — SCHAEFFLER KM802048
Fits:
Front Inner8.25" Ring Gear
or:
Rear Inner8.25" Ring Gear
Fits:
FrontEscalade Base Model
or:
Front InnerEscalade Base Model8.25" Ring Gear
or:
Rear InnerEscalade Base Model8.25" Ring Gear
or:
Rear InnerEscalade ESV8.625" Ring Gears
View on
Amazon
SCHAEFFLER Fits: all 2005 Escalade engines KM88048
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Front Outerwith 8.25 In Ring Gear
Fitment notes — SCHAEFFLER KM88048
Fits:
Front Outerwith 8.25 In Ring Gear1.313 In Inside Diameter X 2.688 In Outside Diameter X 0.875 In Thick
or:
Rear Outerwith 8.625 In Ring Gear1.313 In Inside Diameter X 2.688 In Outside Diameter X 0.875 In Thick
Fits:
Front OuterEscalade Base Modelwith 8.25 In Ring Gear1.313 In Inside Diameter X 2.688 In Outside Diameter X 0.875 In Thick
or:
Rear OuterEscalade Base Model or Escalade ESVwith 8.625 In Ring Gear1.313 In Inside Diameter X 2.688 In Outside Diameter X 0.875 In Thick
View on
Amazon
SCHAEFFLER Fits: all 2005 Escalade engines KHM88649
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear Outer25.4 mm Width
Fitment notes — SCHAEFFLER KHM88649
Rear Outer25.4 mm Width34.925 mm Inside Diameter
Rear OuterEscalade Base Model25.4 mm Width34.925 mm Inside Diameter
View on
Amazon
SCHAEFFLER Fits: all 2005 Escalade engines KNP457992
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race
Fitment notes — SCHAEFFLER KNP457992
Race
Fits:
Front Innerwith 8.25 In Ring Gear25.3510 mm Width41.402 mm Inside Diameter
or:
Rear Innerwith 8.50 In Ring Gear25.3510 mm Width41.402 mm Inside Diameter
View on
Amazon
SCHAEFFLER Fits: all 2005 Escalade engines NP926068
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race
Fitment notes — SCHAEFFLER NP926068
Race
Fits:
Rear Inner8.50" Ring Gear
or:
Front Inner8.25" Ring Gear
Fits:
Front Inner8.25" Ring Gear
or:
Rear InnerEscalade ESV or Escalade EXT8.50" Ring Gear
or:
Rear InnerEscalade Base Model8.50" Ring Gear
View on
Amazon
SKF Fits: all 2005 Escalade engines M88010VP
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race
Fitment notes — SKF M88010VP
Race
Fits:
Rear Outerwith 8.50 Ring Gear
or:
Front Outerwith 8.25 Ring Gear
View on
Amazon
SKF Fits: all 2005 Escalade engines M802011
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear Inner8.50'' Ring Gear
View on
Amazon
SKF Fits: all 2005 Escalade engines M802011VP
🇺🇸 US 🇨🇦 CA
RaceTapered
Fitment notes — SKF M802011VP
RaceTapered
Rear Innerwith 8.50 Ring Gear
View on
Amazon
SKF Fits: all 2005 Escalade engines NP926068
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race
Fitment notes — SKF NP926068
Race
Front Innerwith 8.25 Ring Gear
Fits:
Rear Innerwith 8.50 Ring Gear
or:
Front Innerwith 8.25 Ring Gear
View on
Amazon
SKF Fits: all 2005 Escalade engines M802048011
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Tapered Roller Bearing Set (Bearing and Race)
Fitment notes — SKF M802048011
Tapered Roller Bearing Set (Bearing and Race)
Rear Innerwith 8.50 Ring Gear
View on
Amazon
SKF Fits: 6.0L V8 NP457992
🇲🇽 MX
with 1.6250 In. Bearing Inside Diameter
Fitment notes — SKF NP457992
with 1.6250 In. Bearing Inside Diameter
Rear Inner1.0100" Cone Lengthwith 8.50 Ring Gear
View on
Amazon
TIMKEN Fits: all 2005 Escalade engines NP099285
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race
Fitment notes — TIMKEN NP099285
Race
Front InnerAWD
View on
Amazon
TIMKEN Fits: all 2005 Escalade engines NP544520
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front InnerAWD
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA13073
🇺🇸 US
KitIncludes Timken Pinion Bearings
Fitment notes — USA STANDARD GEAR USA13073
KitIncludes Timken Pinion Bearings
RearGM 8.6"
RearEscalade Base ModelGM 8.6"
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines ZPKGM86A
🇺🇸 US
RearGM 8.6"
Fitment notes — USA STANDARD GEAR ZPKGM86A
RearGM 8.6"pinion Bearing Kit
RearEscalade Base ModelGM 8.6"pinion Bearing Kit
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA13067
🇺🇸 US
KitIncludes Timken Pinion Bearings
Fitment notes — USA STANDARD GEAR USA13067
KitIncludes Timken Pinion Bearings
FrontAWDGM 8.25"IFS
FrontAWDEscalade Base ModelGM 8.25"IFS
View on
Amazon

This table covers the bearings and races on the differential pinion.

Differential Pinion Bearing Baffle

Brand Part Number Markets Notes Buy
GM GENUINE Fits: all 2005 Escalade engines 12479162
🇺🇸 US 🇨🇦 CA
Fits .062-.068 THK8.50/8.625 Ring Gear Saginaw - American Axle
Fitment notes — GM GENUINE 12479162
Fits:
.062-.068 THK8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential
or:
FrontAWD.062-.068 THK
View on
Amazon
GM GENUINE Fits: 6.0L V8 14012691
🇺🇸 US 🇨🇦 CA
RearRWD
Fitment notes — GM GENUINE 14012691
RearRWDExc. Positraction Limited-Slip Rear Axle (G80)7200lb Power Brakes(JH2)35.5mm I.D. X 16.3mm Wide3.73 Rear Axle Ratio (GT4),Active Brake Control (JL4),9.50 Ring Gear Saginaw - American Axle
View on
Amazon

This table covers the baffles that control oil at the pinion bearings.

Differential Pinion Bearing Bolt

Brand Part Number Markets Notes Buy
AAM Fits: all 2005 Escalade engines 40018119
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with 10.5 (In) Rear Axle
View on
Amazon

This table covers the Differential Pinion Bearing bolts.

Differential Pinion Flange

Brand Part Number Markets Notes Buy
AAM Fits: all 2005 Escalade engines 40025925
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with 8.25 (In) Front Axlewith 1344 U-Joint
View on
Amazon
AAM Fits: all 2005 Escalade engines 26060881
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with 14 Bolt Coverwith 9.5 (In) Rear Axle
Fitment notes — AAM 26060881
with 14 Bolt Coverwith 9.5 (In) Rear Axlewithout Balance Weight
View on
Amazon
AAM Fits: all 2005 Escalade engines 40055350
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with 8.6 (In) Rear Axlewith 1415 U-Joint
Fitment notes — AAM 40055350
with 8.6 (In) Rear Axlewith 1415 U-Joint
Escalade Base Model or Escalade EXTwith 8.6 (In) Rear Axlewith 1415 U-Joint
View on
Amazon
AAM Fits: all 2005 Escalade engines 40177786
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with 14 Bolt Coverwith 9.5 (In) Rear Axle
Fitment notes — AAM 40177786
with 14 Bolt Coverwith 9.5 (In) Rear Axlewith 1350 U-Joint
View on
Amazon

This table covers the flanges that connect the driveshaft to the differential pinion.

Differential Pinion Nut

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Popular Fits: all 2005 Escalade engines USA33152
🇺🇸 US
Differential Pinion Shaft Nut
Fitment notes — USA STANDARD GEAR USA33152
Differential Pinion Shaft Nut
Fits:
RearGM 8.6"pinion Shaft Nut-7/8-14 Thread
or:
FrontAWDGM 8.25"IFSpinion Shaft Nut-7/8-14 Thread
Fits:
FrontAWDEscalade Base ModelGM 8.25"IFSpinion Shaft Nut-7/8-14 Thread
or:
RearEscalade Base ModelGM 8.6"pinion Shaft Nut-7/8-14 Thread
View on
Amazon
AAM Fits: all 2005 Escalade engines 9783762
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits with 8.25 (In) Front Axl
Fitment notes — AAM 9783762
Fits:
with 8.25 (In) Front Axl
or:
with 8.6 (In) Rear Axle
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 09783762
🇺🇸 US 🇨🇦 CA
Fits AWD7/8-14 X 11/16
Fitment notes — GM GENUINE 09783762
Fits:
AWD7/8-14 X 11/16End Yoke Nut
or:
FrontAWD7/8-14 X 11/16
or:
8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential7/8-14 X 11/16Pinion Gear Nut
or:
8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential7/8-14 X 11/16Pinion Gear Nutor RWDExc. Positraction Limited-Slip Rear Axle (G80)7200# Power Brakes(JH2)7/8-14 X 11/163.73 Rear Axle Ratio (GT4),Active Brake Control (JL4),9.50 Ring Gear Saginaw - American AxlePinion Gear Nut
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 88891763
🇺🇸 US 🇨🇦 CA
Fits FrontAWD
Fitment notes — GM GENUINE 88891763
Fits:
FrontAWDM10
or:
AWDM10End Yoke Nutor M108.50/8.625 Ring Gear Saginaw - American Axle10 Bolt DifferentialPinion Gear Nut
or:
AWDM10End Yoke Nutor M108.50/8.625 Ring Gear Saginaw - American Axle10 Bolt DifferentialPinion Gear Nutor RWDM10Exc. Positraction Limited-Slip Rear Axle (G80)7200# Power Brakes(JH2)3.73 Rear Axle Ratio (GT4),Active Brake Control (JL4),9.50 Ring Gear Saginaw - American AxlePinion Gear Nut
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines 1260823
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Differential Pinion Shaft NutPinion Nut
Fitment notes — MOTIVE GEAR 1260823
Differential Pinion Shaft NutPinion Nut
FrontAWDGM 8.25" IFS
View on
Amazon

This table covers the Differential Pinion nuts.

Differential Pinion Pilot Bearing

Brand Part Number Markets Notes Buy
AAM Fits: all 2005 Escalade engines 7451870
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with 10.5 (In) Rear Axle
View on
Amazon

This table covers the Differential Pinion Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Differential Pinion Repair Sleeve

Brand Part Number Markets Notes Buy
AAM Popular Fits: all 2005 Escalade engines 26060977
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Replacement sleevewith 10.5 (In) Rear Axle
View on
Amazon
WJB / INMOTION PARTS Popular Fits: all 2005 Escalade engines WS99193
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front OuterAWD
Fitment notes — WJB / INMOTION PARTS WS99193
Front OuterAWDIndependent Front Suspensionwith AAM Axlewith 8.25 IN Ring Gear
View on
Amazon
AAM Fits: all 2005 Escalade engines 26060975
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Sleeve To adapt standard yoke To Use late model triple Lip pinion sealwith 14 Bolt Cover
Fitment notes — AAM 26060975
Fits:
Sleeve To adapt standard yoke To Use late model triple Lip pinion sealwith 14 Bolt Coverwith 9.5 (In) Rear Axl
or:
Sleeve To adapt standard yoke To Use late model triple Lip pinion sealwith 10 Bolt Coverwith 8.6 (In) Rear Axle
View on
Amazon
SKF Fits: all 2005 Escalade engines 99193
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Shaft Diameter: 1.937 In
Fitment notes — SKF 99193
Shaft Diameter: 1.937 In
Frontwith 8.25 Ring Gear
View on
Amazon
SKF Fits: all 2005 Escalade engines 99212
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Shaft Diameter: 2.125 In
Fitment notes — SKF 99212
Shaft Diameter: 2.125 In
Rearwith 8.5 Ring Gear
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA41150
🇺🇸 US
Drive Shaft Pinion Yoke
Fitment notes — USA STANDARD GEAR USA41150
Drive Shaft Pinion Yoke
RearGM 8.6"Triple Lip Pinion Seal Sleeve2.110" Hub DiameterInstalls onto 1.940 In. Yoke Hub
RearEscalade Base ModelGM 8.6"Triple Lip Pinion Seal Sleeve2.110" Hub DiameterInstalls onto 1.940 In. Yoke Hub
View on
Amazon
WJB / INMOTION PARTS Fits: all 2005 Escalade engines WS99210
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear Outerwith AAM Axle
Fitment notes — WJB / INMOTION PARTS WS99210
Rear Outerwith AAM Axlewith 8.625 IN Ring Gear
View on
Amazon

This table covers the wear sleeves used to restore a grooved pinion seal surface.

Differential Pinion Seal

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: all 2005 Escalade engines 12471590
🇺🇸 US 🇨🇦 CA
FrontAWD
Fitment notes — GM GENUINE 12471590
FrontAWDOrder with 88891763
View on
Amazon
NATIONAL Popular Fits: all 2005 Escalade engines 710506
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear Outerwith 8.625 IN Ring Gear
Fitment notes — NATIONAL 710506
Rear Outerwith 8.625 IN Ring Gearwith AAM Axle
View on
Amazon
NATIONAL Popular Fits: all 2005 Escalade engines 710536
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front OuterAWD
Fitment notes — NATIONAL 710536
Front OuterAWDwith 8.25 IN Ring Gearwith AAM AxleIndependent front suspension
View on
Amazon
SKF Popular Fits: all 2005 Escalade engines 21285
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rearwith 8.5 Ring Gear
View on
Amazon
WJB / INMOTION PARTS Popular Fits: all 2005 Escalade engines WS710506
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear Outerwith AAM Axle
Fitment notes — WJB / INMOTION PARTS WS710506
Rear Outerwith AAM Axlewith 8.625 IN Ring Gear
View on
Amazon
ACDELCO Fits: all 2005 Escalade engines 710506
🇺🇸 US 🇨🇦 CA
Gold
Fitment notes — ACDELCO 710506
Gold
Rearwith 8.5 IN or 8.6 IN Ring Gear
View on
Amazon
ACDELCO Fits: all 2005 Escalade engines 710536
🇺🇸 US 🇨🇦 CA
Gold
Fitment notes — ACDELCO 710536
Gold
Frontwith 8.25 IN Diameter Ring Gear
View on
Amazon
BCA Fits: all 2005 Escalade engines NS710506
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Rear Outerwith AAM Axle
Fitment notes — BCA NS710506
Fits:
Rear Outerwith AAM Axlewith 8.625 IN Ring Gear
or:
Rear Outerwith AAM Axlewith 8.25 IN Ring Gearwith Independent Front Suspension
View on
Amazon
BCA Fits: all 2005 Escalade engines NS710536
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front Outerwith AAM Axle
Fitment notes — BCA NS710536
Front Outerwith AAM Axlewith 8.625 IN Ring Gear
View on
Amazon
DORMAN Fits: all 2005 Escalade engines 697151
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontAWD
Fitment notes — DORMAN 697151
FrontAWD8.25" Ring Gearwith Hardware
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 26064028
🇺🇸 US 🇨🇦 CA
Rear Axle8.50/8.625 Ring Gear Saginaw - American Axle
Fitment notes — GM GENUINE 26064028
Rear Axle8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential2 PIECE PINION SEALTRIPLE LIP
View on
Amazon
GM GENUINE Fits: 6.0L V8 26064029
🇺🇸 US 🇨🇦 CA
RWD7200lb Power Brakes(JH2)
Fitment notes — GM GENUINE 26064029
RWD7200lb Power Brakes(JH2)3.73 Rear Axle Ratio (GT4),Active Brake Control (JL4),9.50 Ring Gear Saginaw - American Axle
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines 26064029
🇺🇸 US 🇨🇦 CA
RearRWD
Fitment notes — MOTIVE GEAR 26064029
RearRWD9.5" Ring GearGM 9.5 Differential
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines 8610
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontAWD
Fitment notes — MOTIVE GEAR 8610
FrontAWDGM 8.25" IFS
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines 26064028
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear8.5" or 8.625" Ring Gear
Fitment notes — MOTIVE GEAR 26064028
Rear8.5" or 8.625" Ring GearGM 8.625 Differential
View on
Amazon
SCHAEFFLER Fits: all 2005 Escalade engines SS3119
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rearwith 8.50 In Ring Gear
Fitment notes — SCHAEFFLER SS3119
Rearwith 8.50 In Ring Gear53.975 mm Inside Diameter X 70.2818 mm Outside Diameter X 12.7 mm Thick
View on
Amazon
SCHAEFFLER Fits: all 2005 Escalade engines SS2994
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontAWD
Fitment notes — SCHAEFFLER SS2994
FrontAWD2.91" O.D. X 0.42" Widthwith 8.25 In Ring Gear
View on
Amazon
SCHAEFFLER Fits: all 2005 Escalade engines SS3085
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearViton Type
Fitment notes — SCHAEFFLER SS3085
RearViton Type53.0352 mm Inside Diameter X 70.2818 mm Outside Diameter X 12.7 mm Thick
RearEscalade Base ModelViton Type53.0352 mm Inside Diameter X 70.2818 mm Outside Diameter X 12.7 mm Thick
View on
Amazon
SKF Fits: all 2005 Escalade engines 19428
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Frontwith 8.25 Ring Gear
View on
Amazon
TIMKEN Fits: all 2005 Escalade engines 710506
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear8.5", 8.625" RING GEAR
View on
Amazon
TIMKEN Fits: all 2005 Escalade engines 710536
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
1.969 in. Shaft Size2.908 in. Bore
Fitment notes — TIMKEN 710536
1.969 in. Shaft Size2.908 in. Bore2.913 in. Outer Diam0.455 in. WidthFront
View on
Amazon
TIMKEN Fits: all 2005 Escalade engines 710507
🇺🇸 US 🇨🇦 CA
RearRWD
Fitment notes — TIMKEN 710507
RearRWD9.5" Ring Gear
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA30163
🇺🇸 US
Yukon Mighty Seal
Fitment notes — USA STANDARD GEAR USA30163
Yukon Mighty Seal
RearGM 8.6"For Use with Triple Lip
RearEscalade Base ModelGM 8.6"For Use with Triple Lip
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA30278
🇺🇸 US
Yukon Mighty Seal
Fitment notes — USA STANDARD GEAR USA30278
Yukon Mighty Seal
FrontAWDGM 8.25"IFS
FrontAWDEscalade Base ModelGM 8.25"IFS
View on
Amazon
WJB / INMOTION PARTS Fits: all 2005 Escalade engines WS710536
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front OuterAWD
Fitment notes — WJB / INMOTION PARTS WS710536
Front OuterAWDIndependent Front Suspensionwith AAM Axlewith 8.25 IN Ring Gear
View on
Amazon

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Differential Pinion Shaft Lock Bolt

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: all 2005 Escalade engines 81048
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Differential Shaft Lock Bolt
Fitment notes — DORMAN 81048
Differential Shaft Lock Bolt
Fits:
FrontAWD8.25" Ring Gear
or:
Rear8.5" Ring Gear8.625" Ring Gear
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 14012702
🇺🇸 US 🇨🇦 CA
Includes 10 Lock Screws
Fitment notes — GM GENUINE 14012702
Includes 10 Lock Screws
FrontAWDM10X1.5X59
Fits:
FrontAWDM10X1.5X59
or:
RearRWDExc. Positraction Limited-Slip Rear Axle (G80)7200lb Power Brakes(JH2)3.73 Rear Axle Ratio (GT4),Active Brake Control (JL4),9.50 Ring Gear Saginaw - American Axle
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 25872305
🇺🇸 US 🇨🇦 CA
.3X18X30, 12.7THD8.50/8.625 Ring Gear Saginaw - American Axle
Fitment notes — GM GENUINE 25872305
.3X18X30, 12.7THD8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA33067
🇺🇸 US
Differential Cross Pin Bolt
Fitment notes — USA STANDARD GEAR USA33067
Differential Cross Pin Bolt
Fits:
RearGM 8.6",-5/16" x 18 Thread1.75" Long, Differential Cross Pin Bolt
or:
FrontAWDGM 8.25"IFS,-5/16 In. x 18 thread1.75" Long, Differential Cross Pin Bolt
Fits:
FrontAWDEscalade Base ModelGM 8.25"IFS,-5/16 In. x 18 thread1.75" Long, Differential Cross Pin Bolt
or:
RearEscalade Base ModelGM 8.6",-5/16" x 18 Thread1.75" Long, Differential Cross Pin Bolt
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA33410
🇺🇸 US
Roll Pins
Fitment notes — USA STANDARD GEAR USA33410
Roll Pins
FrontAWDGM 8.25"IFS
FrontAWDEscalade Base ModelGM 8.25"IFS
View on
Amazon

This table covers the Differential Pinion Shaft Lock bolts.

Differential Pinion Shim

Brand Part Number Markets Notes Buy
RICHMOND Popular Fits: all 2005 Escalade engines 1600901
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Rear DifferentialGM 8.5/8.625"or Front Differential
Fitment notes — RICHMOND 1600901
Fits:
Rear DifferentialGM 8.5/8.625"or Front DifferentialAWDGM 8.25" IFS
View on
Amazon
USA STANDARD GEAR Popular Fits: all 2005 Escalade engines USA55009
🇺🇸 US
Fits Rear DifferentialGM 8.6"
Fitment notes — USA STANDARD GEAR USA55009
Fits:
Rear DifferentialGM 8.6"pinion Depth shim Kit
or:
Front DifferentialAWDGM 8.25"IFSpinion Depth shims
Fits:
Front DifferentialAWDEscalade Base ModelGM 8.25"IFSpinion Depth shims
or:
Rear DifferentialEscalade Base ModelGM 8.6"pinion Depth shims
View on
Amazon
EATON Fits: all 2005 Escalade engines EAT3664
🇺🇸 US 🇨🇦 CA
.015" positraction shim.
Fitment notes — EATON EAT3664
.015" positraction shim.
Fits:
Rear4WD
or:
RearAWD
or:
RearRWD
View on
Amazon
EATON Fits: all 2005 Escalade engines EAT3667
🇺🇸 US 🇨🇦 CA
.030" positraction shim.
Fitment notes — EATON EAT3667
.030" positraction shim.
Fits:
Rear4WD
or:
RearAWD
or:
RearRWD
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 26043991
🇺🇸 US 🇨🇦 CA
Fits .040-.044 THK8.50/8.625 Ring Gear Saginaw - American Axle
Fitment notes — GM GENUINE 26043991
Fits:
.040-.044 THK8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential8.25
or:
Front DifferentialAWD.040-.044 THK8.25
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines 1100
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Pinion Shim Pack
Fitment notes — MOTIVE GEAR 1100
Pinion Shim Pack
Fits:
Rear DifferentialGM 8.5/8.625"or Front DifferentialAWDGM 8.25" IFS
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA16042
🇺🇸 US
Dura Grip Posi Shim Kit
Fitment notes — USA STANDARD GEAR USA16042
Dura Grip Posi Shim Kit
RearGM 8.6"
RearEscalade Base ModelGM 8.6"
View on
Amazon

This table covers the Differential Pinion shims.

Differential Rebuild Kit

Master Kit

Brand Part Number Markets Notes Buy
RICHMOND Popular Fits: 6.0L V8 XL10231
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
EXCel
Fitment notes — RICHMOND XL10231
EXCel
FrontAWDFor GM 8.25" IFS
View on
Amazon
RICHMOND Popular Fits: 6.0L V8 XL10261
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
EXCel
Fitment notes — RICHMOND XL10261
EXCel
RearFor GM 8.5"/8.625" (10 Bolt)
View on
Amazon
RICHMOND Popular Fits: 6.0L V8 8310261
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Timken Bearings
Fitment notes — RICHMOND 8310261
Timken Bearings
RearGM 8.5"/8.625" (10 Bolt)
View on
Amazon
BCA Fits: 6.0L V8 NBDRK321JMK
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Master Kit
Fitment notes — BCA NBDRK321JMK
Master Kit
Frontwith 8.25 IN Ring Gear
View on
Amazon
BCA Fits: 6.0L V8 NBRA321TMK
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Master Kit
Fitment notes — BCA NBRA321TMK
Master Kit
FrontEscalade Base Model or Escalade ESV8.25 IN
View on
Amazon
BCA Fits: 6.0L V8 NBRA321CMK
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Master Kit
Fitment notes — BCA NBRA321CMK
Master Kit
RearEscalade Base Model or Escalade ESVwith 8.5 IN or 8.6 IN Ring Gear
View on
Amazon
DANA Fits: 6.0L V8 10038957
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SpicerMaster Kit
Fitment notes — DANA 10038957
SpicerMaster KitIncludes Shims and Ring Gear Bolts
with GM 8.5 & 8.6 Axles
View on
Amazon
DORMAN Fits: 6.0L V8 697119
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearEscalade Base Model or Escalade ESV
Fitment notes — DORMAN 697119
RearEscalade Base Model or Escalade ESV8.5" Ring GearStandard Design
View on
Amazon
DORMAN Fits: 6.0L V8 697036
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontEscalade Base Model or Escalade ESV
Fitment notes — DORMAN 697036
FrontEscalade Base Model or Escalade ESV8.5" Ring GearStandard Design
View on
Amazon
DORMAN Fits: 6.0L V8 797119
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearEscalade Base Model or Escalade ESV
Fitment notes — DORMAN 797119
RearEscalade Base Model or Escalade ESV8.5" Ring GearImproved Design
View on
Amazon
MOTIVE GEAR Fits: 6.0L V8 R10RLMK
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearEscalade Base Model or Escalade ESV
Fitment notes — MOTIVE GEAR R10RLMK
RearEscalade Base Model or Escalade ESV8.5" Ring GearStandard DesignGM 8.625 Differential
View on
Amazon
MOTIVE GEAR Fits: 6.0L V8 R82RIFSLMK
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Master Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Ring Gear Bolts
Fitment notes — MOTIVE GEAR R82RIFSLMK
Master Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Ring Gear Bolts
FrontAWDGM 8.25" IFS
View on
Amazon
MOTIVE GEAR Fits: 6.0L V8 R10RLEMK
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Master Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts
Fitment notes — MOTIVE GEAR R10RLEMK
Master Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts
RearGM 8.5"/8.625"
View on
Amazon
MOTIVE GEAR Fits: 6.0L V8 R82RIFSLMKT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Master Bearing Kit Includes Timken Tapered Bearings , Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), RI
Fitment notes — MOTIVE GEAR R82RIFSLMKT
Master Bearing Kit Includes Timken Tapered Bearings , Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), RI
FrontAWDGM 8.25" IFS
View on
Amazon
SKF Fits: 6.0L V8 SDK321JMK
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Master Kit
Fitment notes — SKF SDK321JMK
Master Kit
Frontwith 8.25 Ring Gear
View on
Amazon
SKF Fits: 6.0L V8 SDK321CMK
🇲🇽 MX
Master Kit
Fitment notes — SKF SDK321CMK
Master Kit
Rearwith 8.50 Ring Gear
View on
Amazon
SKF Fits: 6.0L V8 SDK321KMK
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Master Kit
Fitment notes — SKF SDK321KMK
Master Kit
Rearwith 8.50 & 8.625 Ring Gear
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZKGM86
🇺🇸 US
Master Overhaul KitIncludes Koyo Bearings
Fitment notes — USA STANDARD GEAR ZKGM86
Master Overhaul KitIncludes Koyo Bearings
RearEscalade Base ModelGM 8.6" Rear
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZKGM825IFSB
🇺🇸 US
Differential Rebuild KitsIncludes Koyo Bearings, Stub Axle Bearings and Seals
Fitment notes — USA STANDARD GEAR ZKGM825IFSB
Differential Rebuild KitsIncludes Koyo Bearings, Stub Axle Bearings and Seals
FrontAWDEscalade Base ModelGM 8.25" FrontIFSGaskets For 2007 & Newer Not Included
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 USA14092
🇺🇸 US
Yukon Master KitTimken Bearings
Fitment notes — USA STANDARD GEAR USA14092
Yukon Master KitTimken Bearings
RearEscalade Base ModelGM 8.6"Uses M802048 Inner Pinion Bearing
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 USA14084
🇺🇸 US
Yukon Differential Master KitIncludes Timken Bearings, Stub Axle Bearings and Seals
Fitment notes — USA STANDARD GEAR USA14084
Yukon Differential Master KitIncludes Timken Bearings, Stub Axle Bearings and Seals
FrontAWDEscalade Base ModelGM 8.25" FrontIFSGaskets For 2007 & Newer Not Included
View on
Amazon

Mega Kit

Brand Part Number Markets Notes Buy
MOTIVE GEAR Fits: 6.0L V8 R10RLSK
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Super Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear Bolts
Fitment notes — MOTIVE GEAR R10RLSK
Super Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear Bolts
RearGM 8.5"/8.625" (10 Bolt)
View on
Amazon
MOTIVE GEAR Fits: 6.0L V8 R10RLSKT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Super Bearing Kit Includes Timken Tapered Bearings , Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear BOL
Fitment notes — MOTIVE GEAR R10RLSKT
Super Bearing Kit Includes Timken Tapered Bearings , Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear BOL
RearGM 8.5"/8.625" (10 Bolt)
View on
Amazon

Standard Kit

Brand Part Number Markets Notes Buy
NATIONAL Popular Fits: 6.0L V8 RA321C
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rearwith 8.625 IN Ring Gear
Fitment notes — NATIONAL RA321C
Rearwith 8.625 IN Ring Gearwith AAM Axle
View on
Amazon
TIMKEN Popular Fits: 6.0L V8 DRK321T
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Standard Kit
Fitment notes — TIMKEN DRK321T
Standard Kit
FrontAWD8.25" Ring Gear
View on
Amazon
TIMKEN Popular Fits: 6.0L V8 DRK321C
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Standard Kit
Fitment notes — TIMKEN DRK321C
Standard Kit
RearEscalade Base Model or Escalade EXT8.625" Ring Gear
View on
Amazon
AAM Fits: 6.0L V8 74067005
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with 14 Bolt Coverwith 9.5 (In) Rear Axle
View on
Amazon
BCA Fits: 6.0L V8 NBDRK321K
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Standard Kit
Fitment notes — BCA NBDRK321K
Standard Kit
RearEscalade Base Model or Escalade ESVwith 8.5 IN or 8.6 IN Ring Gear
View on
Amazon
BCA Fits: 6.0L V8 NBRA321C
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Standard Kit
Fitment notes — BCA NBRA321C
Standard Kit
RearEscalade Base Model or Escalade ESVwith 8.5 IN or 8.6 IN Ring Gear
View on
Amazon
BCA Fits: 6.0L V8 NBDRK321J
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Standard Kit
Fitment notes — BCA NBDRK321J
Standard Kit
Frontwith 8.25 IN Ring Gear
View on
Amazon
BCA Fits: 6.0L V8 NBRA321T
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Standard Kit
Fitment notes — BCA NBRA321T
Standard Kit
FrontEscalade Base Model or Escalade ESVwith 8.25 IN Ring Gear
View on
Amazon
DANA Fits: 6.0L V8 10038956
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SpicerStandard Kit
Fitment notes — DANA 10038956
SpicerStandard Kit
Rearwith GM 8.5 & 8.6 Axles
View on
Amazon
DANA Fits: 6.0L V8 10038958
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SpicerStandard Kit
Fitment notes — DANA 10038958
SpicerStandard Kit
FrontEscalade Base Modelwith GM 8.25 IFS Axle
View on
Amazon
LUK Fits: 6.0L V8 GDK321J
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Standard Kit
Fitment notes — LUK GDK321J
Standard Kit
FrontEscalade Base Model or Escalade ESV8.25 IN
View on
Amazon
LUK Fits: 6.0L V8 GDK321C
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Standard Kit
Fitment notes — LUK GDK321C
Standard Kit
RearEscalade Base Model or Escalade ESV, 8.5"/8.6"
View on
Amazon
LUK Fits: 6.0L V8 GDK321K
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Standard Kit
Fitment notes — LUK GDK321K
Standard Kit
RearEscalade Base Model or Escalade ESV, 8.5"/8.6"
View on
Amazon
MOTIVE GEAR Fits: 6.0L V8 R10RL
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking
Fitment notes — MOTIVE GEAR R10RL
Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking
RearGM 8.625" (10 Bolt)
View on
Amazon
MOTIVE GEAR Fits: 6.0L V8 R82RIFSL
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seal (Axle, Pinion), and Thread L
Fitment notes — MOTIVE GEAR R82RIFSL
Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seal (Axle, Pinion), and Thread L
FrontAWDGM 8.25" IFS
View on
Amazon
MOTIVE GEAR Fits: 6.0L V8 R10RLT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Bearing Kit Includes Timken Tapered Bearings , Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread L
Fitment notes — MOTIVE GEAR R10RLT
Bearing Kit Includes Timken Tapered Bearings , Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread L
RearGM 8.5"/8.625" (10 Bolt)
View on
Amazon
MOTIVE GEAR Fits: 6.0L V8 R82RIFSLT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Bearing Kit Includes Timken Tapered Bearings , Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seal (Axle, Pinion), and Thread
Fitment notes — MOTIVE GEAR R82RIFSLT
Bearing Kit Includes Timken Tapered Bearings , Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seal (Axle, Pinion), and Thread
FrontAWDGM 8.25" IFS
View on
Amazon
SKF Fits: 6.0L V8 SDK321J
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Standard Kit
Fitment notes — SKF SDK321J
Standard Kit
Frontwith 8.25 Ring Gear
View on
Amazon
SKF Fits: 6.0L V8 SDK321C
🇲🇽 MX
Standard Kit
Fitment notes — SKF SDK321C
Standard Kit
Rearwith 8.50 Ring Gear
View on
Amazon
SKF Fits: 6.0L V8 SDK321K
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Standard Kit
Fitment notes — SKF SDK321K
Standard Kit
Rearwith 8.50 & 8.625 Ring Gear
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZBKGM86
🇺🇸 US
Standard KitsIncludes Koyo Bearings, Pinion Bearings, Carrier Bearings, Crush Sleeve, Pinion Seal
Fitment notes — USA STANDARD GEAR ZBKGM86
Standard KitsIncludes Koyo Bearings, Pinion Bearings, Carrier Bearings, Crush Sleeve, Pinion Seal
RearEscalade Base ModelGM 8.6"10 BoltBearing and Seal KitNo Shims
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZBKGM825IFSB
🇺🇸 US
Standard KitsIncludes Koyo Bearings, Pinion Bearings, Carrier Bearings, Crush Sleeve, Pinion Seal
Fitment notes — USA STANDARD GEAR ZBKGM825IFSB
Standard KitsIncludes Koyo Bearings, Pinion Bearings, Carrier Bearings, Crush Sleeve, Pinion Seal
FrontAWDEscalade Base ModelGM 8.25 In. IFS
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 USA11071
🇺🇸 US
Standard KitIncludes Timken Carrier Bearings, Races, Pinion Bearings, Races, Pinion Seal, and Crush Sleeve
Fitment notes — USA STANDARD GEAR USA11071
Standard KitIncludes Timken Carrier Bearings, Races, Pinion Bearings, Races, Pinion Seal, and Crush Sleeve
RearEscalade Base ModelGM 8.6" RearDifferential Bearing Kit
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 USA11104
🇺🇸 US
Standard KitTimken Bearings
Fitment notes — USA STANDARD GEAR USA11104
Standard KitTimken BearingsCarrier Bearings/RacesPinion Bearings/Races/Pinion Seal/Crush Sleeve/Oil
FrontAWDEscalade Base ModelGM 8.25"IFS
View on
Amazon
WJB / INMOTION PARTS Fits: 6.0L V8 WKRA321C
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rearwith AAM Axle
Fitment notes — WJB / INMOTION PARTS WKRA321C
Rearwith AAM Axlewith 8.625 IN Ring Gear
View on
Amazon

Super Kit

Brand Part Number Markets Notes Buy
MOTIVE GEAR Fits: 6.0L V8 MGK219
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Differential Ring and Pinion Complete KitFront and Rear
Fitment notes — MOTIVE GEAR MGK219
Differential Ring and Pinion Complete KitFront and Rearwith Timken Bearings
Front & RearAWDGM 8.25" IFS and GM 8.5"4.11 RatioRequires 3.42 and Higher Front CarrierRequires 2.73 and Higher Rear Carrier
View on
Amazon
MOTIVE GEAR Fits: 6.0L V8 MGK222
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Differential Ring and Pinion Complete KitFront and Rear
Fitment notes — MOTIVE GEAR MGK222
Differential Ring and Pinion Complete KitFront and Rearwith Timken Bearings
Front & RearAWDGM 8.25" IFS and GM 8.5"4.88 RatioRequires 3.42 and Higher Front CarrierRequires 2.73 and Higher Rear Carrier
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZGK2021
🇺🇸 US
Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 3.42 Ratio Gear Set
Fitment notes — USA STANDARD GEAR ZGK2021
Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 3.42 Ratio Gear Set
RearEscalade Base Model8.6" GMAxle Bearings and Axle Sealswith 10 Bolt Rear Differential Coverwith LM603049/ LM603012 Carrier Bearings (3.06" OD)with 30 Spline Axle Shaft
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZGK2023
🇺🇸 US
Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 4.11 Ratio Gear Set
Fitment notes — USA STANDARD GEAR ZGK2023
Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 4.11 Ratio Gear Set
RearEscalade Base Model8.6" GMAxle Bearings and Axle Sealswith 10 Bolt Rear Differential Coverwith LM603049/ LM603012 Carrier Bearings (3.06" OD)with 30 Spline Axle Shaft
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZGK2017
🇺🇸 US
Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 3.73 Ratio Gear Set
Fitment notes — USA STANDARD GEAR ZGK2017
Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 3.73 Ratio Gear Set
RearEscalade Base Model8.6" GM30 Spline Dura Grip Limited Slip Carrier, Axle Bearings and Axle Sealswith 10 Bolt Rear Differential Coverwith LM603049/ LM603012 Carrier Bearings (3.06" OD)with 30 Spline Axle Shaft
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZGK2018
🇺🇸 US
Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 4.11 Ratio Gear Set
Fitment notes — USA STANDARD GEAR ZGK2018
Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 4.11 Ratio Gear Set
RearEscalade Base Model8.6" GM30 Spline Dura Grip Limited Slip Carrier, Axle Bearings and Axle Sealswith 10 Bolt Rear Differential Coverwith LM603049/ LM603012 Carrier Bearings (3.06" OD)with 30 Spline Axle Shaft
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZGK2016
🇺🇸 US
Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 3.42 Ratio Gear Set
Fitment notes — USA STANDARD GEAR ZGK2016
Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 3.42 Ratio Gear Set
RearEscalade Base Model8.6" GM30 Spline Dura Grip Limited Slip Carrier, Axle Bearings and Axle Sealswith 10 Bolt Rear Differential Coverwith LM603049/ LM603012 Carrier Bearings (3.06" OD)with 30 Spline Axle Shaft
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZGK2022
🇺🇸 US
Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 3.73 Ratio Gear Set
Fitment notes — USA STANDARD GEAR ZGK2022
Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 3.73 Ratio Gear Set
RearEscalade Base Model8.6" GMAxle Bearings and Axle Sealswith 10 Bolt Rear Differential Coverwith LM603049/ LM603012 Carrier Bearings (3.06" OD)with 30 Spline Axle Shaft
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZGK2024
🇺🇸 US
Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 4.56 Ratio Gear Set
Fitment notes — USA STANDARD GEAR ZGK2024
Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 4.56 Ratio Gear Set
RearEscalade Base Model8.6" GMAxle Bearings and Axle Sealswith 10 Bolt Rear Differential Coverwith LM603049/ LM603012 Carrier Bearings (3.06" OD)with 30 Spline Axle Shaft
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZGK2025
🇺🇸 US
Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 4.88 Ratio Gear Set
Fitment notes — USA STANDARD GEAR ZGK2025
Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 4.88 Ratio Gear Set
RearEscalade Base Model8.6" GMAxle Bearings and Axle Sealswith 10 Bolt Rear Differential Coverwith LM603049/ LM603012 Carrier Bearings (3.06" OD)with 30 Spline Axle Shaft
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZGK2019
🇺🇸 US
Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 4.56 Ratio Gear Set
Fitment notes — USA STANDARD GEAR ZGK2019
Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 4.56 Ratio Gear Set
RearEscalade Base Model8.6" GM30 Spline Dura Grip Limited Slip Carrier, Axle Bearings and Axle Sealswith 10 Bolt Rear Differential Coverwith LM603049/ LM603012 Carrier Bearings (3.06" OD)with 30 Spline Axle Shaft
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZGK2020
🇺🇸 US
Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 4.88 Ratio Gear Set
Fitment notes — USA STANDARD GEAR ZGK2020
Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 4.88 Ratio Gear Set
RearEscalade Base Model8.6" GM30 Spline Dura Grip Limited Slip Carrier, Axle Bearings and Axle Sealswith 10 Bolt Rear Differential Coverwith LM603049/ LM603012 Carrier Bearings (3.06" OD)with 30 Spline Axle Shaft
View on
Amazon

This table covers kits that group the bearings, races and seals for a differential rebuild.

Differential Ring and Pinion

Economy

Brand Part Number Markets Notes Buy
DANA Popular Fits: 6.0L V8 2023695
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SVL
Fitment notes — DANA 2023695
SVL
10 Boltwith 3.73 Gear Ratiowith GM 8.5 & 8.6 Axles
View on
Amazon
DANA Popular Fits: 6.0L V8 2020642
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SVL
Fitment notes — DANA 2020642
SVL
10 Boltwith 3.42 Gear Ratiowith GM 8.5 & 8.6 Axles
View on
Amazon
DORMAN Popular Fits: 6.0L V8 697301
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear8.625" Ring Gear
Fitment notes — DORMAN 697301
Rear8.625" Ring Gearwith 3.73 Axle Ratio
View on
Amazon
RICHMOND Popular Fits: 6.0L V8 GM85
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
EXCel
Fitment notes — RICHMOND GM85
EXCel
Fits:
RearFor GM 8.5"/8.625" (10 Bolt)
or:
RearGM 8.625 Differential
View on
Amazon
RICHMOND Popular Fits: 6.0L V8 GM825
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
EXCel
Fitment notes — RICHMOND GM825
EXCel
FrontAWDFor GM 8.25" IFS
View on
Amazon
DANA Fits: 6.0L V8 2023698
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SVL
Fitment notes — DANA 2023698
SVL
10 Boltwith 3.23 Gear Ratiowith GM 8.5 & 8.6 Axles
View on
Amazon
DANA Fits: 6.0L V8 2023704
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SVL
Fitment notes — DANA 2023704
SVL
10 Boltwith 4.88 Gear Ratiowith GM 8.5 & 8.6 Axles
View on
Amazon
DANA Fits: 6.0L V8 2020954
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SVL
Fitment notes — DANA 2020954
SVL
10 Boltwith 3.90 Gear Ratiowith GM 8.5 & 8.6 Axles
View on
Amazon
DORMAN Fits: 6.0L V8 697359
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front8.25" Ring Gear
Fitment notes — DORMAN 697359
Front8.25" Ring GearAluminum Housingwith 4.10 Axle Ratio
View on
Amazon
DORMAN Fits: 6.0L V8 697360
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front8.25" Ring Gear
Fitment notes — DORMAN 697360
Front8.25" Ring GearAluminum Housingwith 4.56 Axle Ratio
View on
Amazon
DORMAN Fits: 6.0L V8 697361
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front8.25" Ring Gear
Fitment notes — DORMAN 697361
Front8.25" Ring GearAluminum Housingwith 4.88 Axle Ratio
View on
Amazon
DORMAN Fits: 6.0L V8 697812
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear8.625" Ring Gear
Fitment notes — DORMAN 697812
Rear8.625" Ring Gearwith 2.73 Axle Ratio
View on
Amazon
DORMAN Fits: 6.0L V8 697810
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear8.625" Ring Gear
Fitment notes — DORMAN 697810
Rear8.625" Ring Gearwith 3.23 Axle Ratio
View on
Amazon
DORMAN Fits: 6.0L V8 697300
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear8.625" Ring Gear
Fitment notes — DORMAN 697300
Rear8.625" Ring Gearwith 3.42 Axle Ratio
View on
Amazon
DORMAN Fits: 6.0L V8 697358
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front8.25" Ring Gear
Fitment notes — DORMAN 697358
Front8.25" Ring GearAluminum Housingwith 3.73 Axle Ratio
View on
Amazon
DORMAN Fits: 6.0L V8 697808
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front8.25" Ring Gear
Fitment notes — DORMAN 697808
Front8.25" Ring GearAluminum HousingReverse Cutwith 3.42 Axle Ratio
View on
Amazon
DORMAN Fits: 6.0L V8 697303
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear8.625" Ring Gear
Fitment notes — DORMAN 697303
Rear8.625" Ring Gearwith 4.10 Axle Ratio
View on
Amazon
DORMAN Fits: 6.0L V8 697201
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearEscalade Base Model
Fitment notes — DORMAN 697201
RearEscalade Base Model8.5" Ring GearCarrier Break 2.56/2.73with 4.56 Axle Ratio
View on
Amazon

High Performance

Brand Part Number Markets Notes Buy
MOTIVE GEAR Fits: 6.0L V8 G885
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Motive Gear Performance
Fitment notes — MOTIVE GEAR G885
Motive Gear Performance
Fits:
Rear8.5" Ring Gearwith 3.73 Axle RatioGM 8.625 Differential
or:
RearGM 8.5"/8.625" (10 Bolt)
View on
Amazon
MOTIVE GEAR Fits: 6.0L V8 G885IFS
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Performance
Fitment notes — MOTIVE GEAR G885IFS
Performance
Fits:
FrontAWDGM 8.25" IFS
or:
Front8.25" Ring GearAluminum HousingReverse Cutwith 3.42 Axle RatioGM 8.25 IFS Differential
or:
Front8.25" Ring GearAluminum Housingwith 3.73 Axle RatioGM 8.25 IFS Differential
or:
Front8.25" Ring GearAluminum Housingwith 4.10 Axle RatioGM 8.25 IFS Differential
or:
Front8.25" Ring GearAluminum Housingwith 4.88 Axle RatioGM 8.25 IFS Differential
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
RICHMOND Popular Fits: 6.0L V8 4900171
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearGM 8.5"/8.625" (10 Bolt)
View on
Amazon
AAM Fits: 6.0L V8 26066706
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with 3.73 Axle Ratiowith 8.6 (In) Rear Axle
View on
Amazon
AAM Fits: 6.0L V8 40053031
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with 4.10 Axle Ratiowith 8.6 (In) Rear Axle
View on
Amazon
AAM Fits: 6.0L V8 40053802
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with 4.56 Axle Ratiowith 8.6 (In) Rear Axle
View on
Amazon
AAM Fits: 6.0L V8 40093540
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Escalade ESV or Escalade EXTwith 3.73 Axle Ratio
Fitment notes — AAM 40093540
Escalade ESV or Escalade EXTwith 3.73 Axle Ratiowith 8.25 (In) Front Axle
View on
Amazon
AAM Fits: 6.0L V8 40093541
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Escalade ESV or Escalade EXTwith 3.42 Axle Ratio
Fitment notes — AAM 40093541
Escalade ESV or Escalade EXTwith 3.42 Axle Ratiowith 8.25 (In) Front Axle
View on
Amazon
AAM Fits: 6.0L V8 40093539
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Escalade ESV or Escalade EXTwith 3.08 Axle Ratio
Fitment notes — AAM 40093539
Escalade ESV or Escalade EXTwith 3.08 Axle Ratiowith 8.25 (In) Front Axle
View on
Amazon
AAM Fits: 6.0L V8 40053029
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with 3.42 Axle Ratiowith 8.6 (In) Rear Axle
View on
Amazon
AAM Fits: 6.0L V8 40058731
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rearwith 3.73 Axle Ratio
Fitment notes — AAM 40058731
Rearwith 3.73 Axle Ratiowith 14 Bolt Coverwith 10.5 (In) Rear Axle
View on
Amazon
AAM Fits: 6.0L V8 40173817
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with 3.42 Axle Ratiowith 14 Bolt Cover
Fitment notes — AAM 40173817
with 3.42 Axle Ratiowith 14 Bolt Coverwith 9.5 (In) Rear Axle
View on
Amazon
AAM Fits: 6.0L V8 40125343
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Escalade ESV or Escalade EXTwith 3.23 Axle Ratio
Fitment notes — AAM 40125343
Escalade ESV or Escalade EXTwith 3.23 Axle Ratiowith 8.25 (In) Front Axle
View on
Amazon
AAM Fits: 6.0L V8 40070463
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rearwith 4.1 Axle Ratio
Fitment notes — AAM 40070463
Rearwith 4.1 Axle Ratiowith 14 Bolt Coverwith 10.5 (In) Rear Axle
View on
Amazon
AAM Fits: 6.0L V8 40127810
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with 3.08 Axle Ratiowith 8.6 (In) Rear Axle
View on
Amazon
AAM Fits: 6.0L V8 40108742
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with 3.23 Axle Ratiowith 8.6 (In) Rear Axle
View on
Amazon
GM GENUINE Fits: 6.0L V8 23114024
🇺🇸 US 🇨🇦 CA
FrontAWD
Fitment notes — GM GENUINE 23114024
FrontAWD3.42 Rear Axle Ratio (GU6)
View on
Amazon
GM GENUINE Fits: 6.0L V8 19540813
🇺🇸 US 🇨🇦 CA
3.42 Rear Axle Ratio (GU6),8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential
View on
Amazon
GM GENUINE Fits: 6.0L V8 GM85373
🇺🇸 US 🇨🇦 CA
OEM3.73 ratio
Fitment notes — GM GENUINE GM85373
OEM3.73 ratio
Fits:
RearAWDGM 8.6"or RearRWDGM 8.6"or Rear4WDGM 8.6"
View on
Amazon
GM GENUINE Fits: 6.0L V8 GM825373
🇺🇸 US 🇨🇦 CA
OEM3.73 ratio
Fitment notes — GM GENUINE GM825373
OEM3.73 ratio
Fits:
Front4WDGM 8.25"IFS
or:
FrontAWDGM 8.25"IFS
View on
Amazon
GM GENUINE Fits: 6.0L V8 GM85342
🇺🇸 US 🇨🇦 CA
OEM3.42 ratio
Fitment notes — GM GENUINE GM85342
OEM3.42 ratio
Fits:
RearAWDGM 8.6"or RearRWDGM 8.6"or Rear4WDGM 8.6"
View on
Amazon
GM GENUINE Fits: 6.0L V8 GM85456
🇺🇸 US 🇨🇦 CA
OEM4.56 ratio
Fitment notes — GM GENUINE GM85456
OEM4.56 ratio
Fits:
RearAWDGM 8.6"or RearRWDGM 8.6"or Rear4WDGM 8.6"
View on
Amazon
MOTIVE GEAR Fits: 6.0L V8 GM10A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
A-Line Ring and Pinion
Fitment notes — MOTIVE GEAR GM10A
A-Line Ring and Pinion
Fits:
Rear8.625" Ring Gearwith 3.73 Axle RatioGM 8.625 Differential
or:
RearGM 8.5"/8.625" (10 Bolt)
View on
Amazon
MOTIVE GEAR Fits: 6.0L V8 GM10
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Rear8.625" Ring Gear
Fitment notes — MOTIVE GEAR GM10
Fits:
Rear8.625" Ring Gearwith 2.73 Axle RatioGM 8.625 Differential
or:
Rear8.625" Ring Gearwith 3.08 Axle RatioGM 8.625 Differential
or:
Rear8.625" Ring Gearwith 3.42 Axle RatioGM 8.625 Differential
or:
Rear8.625" Ring Gearwith 4.10 Axle RatioGM 8.625 Differential
or:
RearEscalade Base Model or Escalade EXT8.625" Ring Gearwith 3.73 Axle RatioGM 8.625 Differential
or:
RearEscalade ESVGM 8.625 Differential
or:
RearGM 8.5"/8.625" (10 Bolt)
View on
Amazon
MOTIVE GEAR Fits: 6.0L V8 GM10IFS
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits FrontAWD
Fitment notes — MOTIVE GEAR GM10IFS
Fits:
FrontAWDGM 8.25" IFS
or:
Front8.25" Ring GearAluminum Housingwith 4.56 Axle RatioGM 8.25 IFS Differential
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZGGM85
🇺🇸 US 🇨🇦 CA
Ring Gear Diam: 8.5"Differential Cover Bolts: 10
Fitment notes — USA STANDARD GEAR ZGGM85
Ring Gear Diam: 8.5"Differential Cover Bolts: 10Ring Gear Bolts: 10pinion Splines: 30
Fits:
AWDRearGM 8.5" / 8.6"or 4WDRearGM 8.5" / 8.6"
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZGGM825R
🇺🇸 US 🇨🇦 CA
Ring Gear Diameter: 8.25"Dropout-Type (No cover bolts)
Fitment notes — USA STANDARD GEAR ZGGM825R
Ring Gear Diameter: 8.25"Dropout-Type (No cover bolts)Ring Gear Bolts: 10pinion Splines: 30
Fits:
Front4WDGM 8.25" IFS
or:
FrontAWDGM 8.25" IFS
View on
Amazon
Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.0L V8 19541990
🇺🇸 US 🇨🇦 CA
3.73 Rear Axle Ratio (GT4),8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential
View on
Amazon

This table covers the ring-and-pinion gear sets that set the axle ratio.

Differential Ring Gear Bolt

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: all 2005 Escalade engines 11610549
🇺🇸 US 🇨🇦 CA
Fits Front DifferentialAWD
Fitment notes — GM GENUINE 11610549
Fits:
Front DifferentialAWDFront AXLE7/16-20
or:
8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential7/16-20
View on
Amazon
USA STANDARD GEAR Popular Fits: all 2005 Escalade engines USA33049
🇺🇸 US 🇨🇦 CA
Fits Rear DifferentialGM 8.6", Ring Gear Bolt
Fitment notes — USA STANDARD GEAR USA33049
Fits:
Rear DifferentialGM 8.6", Ring Gear BoltLeft Hand Thread, -7/16-20UNF
or:
Front DifferentialAWDGM 8.25"IFS, Ring Gear BoltLeft Hand Thread, -7/16-20UNF
Fits:
Front DifferentialAWDEscalade Base ModelGM 8.25"IFS, Ring Gear BoltLeft Hand Thread, -7/16-20UNF
or:
Rear DifferentialEscalade Base ModelGM 8.6", Ring Gear BoltLeft Hand Thread, -7/16-20UNF
View on
Amazon
AAM Fits: all 2005 Escalade engines 40061033
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
7/16" x 20 x .88" - Left Hand 6 PT Serrated Hex with Adhesivewith 8.6 (In) Rear Axle
Fitment notes — AAM 40061033
7/16" x 20 x .88" - Left Hand 6 PT Serrated Hex with Adhesivewith 8.6 (In) Rear Axle
Fits:
7/16" x 20 x .88" - Left Hand 6 PT Serrated Hex with Adhesivewith 8.6 (In) Rear Axl
or:
Escalade ESV or Escalade EXT7/16" x 20 x .88" - Left Hand 6 PT Serrated Hex with Adhesivewith 8.25 (In) Front Axle
View on
Amazon
AAM Fits: all 2005 Escalade engines 14012703
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Thread Diameter: 12 MM
Fitment notes — AAM 14012703
Thread Diameter: 12 MM
with 9.25 (In) Front Axle
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines 14012703
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Ring Gear Bolt
Fitment notes — MOTIVE GEAR 14012703
Ring Gear Bolt
Front DifferentialAWDChrysler 9.25", GM 9.25" IFS, 9.5"
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines 14066913
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Ring Gear Bolt
Fitment notes — MOTIVE GEAR 14066913
Ring Gear Bolt
Fits:
Rear DifferentialGM 8.5"/8.625"or Front DifferentialAWDGM 8.25" IFS
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines PB1792L
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear DifferentialGM 8.5"/8.625"
Fitment notes — MOTIVE GEAR PB1792L
Rear DifferentialGM 8.5"/8.625"Extended Length For Use with Gear Spacer
View on
Amazon

This table covers the Differential Ring Gear bolts.

Differential Seal

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: all 2005 Escalade engines 15521872
🇺🇸 US 🇨🇦 CA
FrontAWD
View on
Amazon
AAM Fits: all 2005 Escalade engines 26064030
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Use with 26060977 sleevewith 10.5 (In) Rear Axle
View on
Amazon
DORMAN Fits: all 2005 Escalade engines 600606
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Front Right InnerAWD
Fitment notes — DORMAN 600606
Fits:
Front Right InnerAWD
or:
Front Left InnerAWD
View on
Amazon
ELRING Fits: all 2005 Escalade engines 782390
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits InletCenter
Fitment notes — ELRING 782390
Fits:
InletCenterGM 8.5" Axl
or:
InletRearGM 8.5" Axle
Fits:
InletRearGM 8.5" Axl
or:
InletCenterEscalade Base Model or Escalade ESVGM 8.5" Axle
View on
Amazon
SKP Fits: all 2005 Escalade engines SK600606
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Front Right InnerAWD
Fitment notes — SKP SK600606
Fits:
Front Right InnerAWD
or:
Front Left InnerAWD
View on
Amazon

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Differential Spider Gear

Economy

Brand Part Number Markets Notes Buy
RICHMOND Popular Fits: all 2005 Escalade engines XL4046
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
ExcelDifferential Carrier Gear Kit
Fitment notes — RICHMOND XL4046
ExcelDifferential Carrier Gear Kit28 SplineIncludes Side and Pinion Gears, Washers, Pinion Shaft and Lock Bolt or Roll Pin
Front AxleAWDFor GM 8.25" IFS1.2" Spline DiameterOpen
Front AxleAWDEscalade Base ModelFor GM 8.25" IFS1.2" Spline DiameterOpen
View on
Amazon
DANA Fits: all 2005 Escalade engines 2023879
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SVLCarrier Gear Kit
Fitment notes — DANA 2023879
SVLCarrier Gear Kit
Rear Axlewith V2 Designwith 30 Splineswith GM 8.6 Axlewith Open Differential
View on
Amazon
PRO-KING Fits: all 2005 Escalade engines 742G717C
🇺🇸 US 🇨🇦 CA
Differential Gear SetRear Differential
Fitment notes — PRO-KING 742G717C
Differential Gear SetRear DifferentialSpider & pinion Gear KitCasting # 7875Fits 30 Spline Axle ShaftGM 8.5"/8.6"Non-Posi
View on
Amazon
RICHMOND Fits: all 2005 Escalade engines XL4054
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
ExcelDifferential Carrier Gear Kit
Fitment notes — RICHMOND XL4054
ExcelDifferential Carrier Gear Kit30 SplineIncludes Side and Pinion Gears, Washers, Pinion Shaft and Lock Bolt or Roll Pin
Rear Axlefor GM 8.625" (10 Bolt)1.32" Spline DiameterOpenCase# Ending In 7875 and 1073For Cases with Unequal Size 1.5" and 3.75" WindowsFrom 2000.5
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
AAM Popular Fits: all 2005 Escalade engines 74047015
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Differential Spider and Pinion Gear Kit
Fitment notes — AAM 74047015
Differential Spider and Pinion Gear Kit
with 10 Bolt Coverwith 30 Splineswith 8.6 (In) Rear Axle
View on
Amazon
AAM Popular Fits: all 2005 Escalade engines 74040917
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Differential Spider and Pinion Gear Kit
Fitment notes — AAM 74040917
Differential Spider and Pinion Gear Kit
with 14 Bolt Coverwith 10.5 (In) Rear Axle
Fits:
Escalade Base Model or Escalade EXTwith 14 Bolt Coverwith 10.5 (In) Rear Axl
or:
Escalade ESVwith 14 Bolt Holeswith 10.5 (In) Rear Axle
View on
Amazon
USA STANDARD GEAR Popular Fits: all 2005 Escalade engines ZIKGM86S30V2
🇺🇸 US
Spider Gear or Carrier Gear Kit or Spider Gear SetCast
Fitment notes — USA STANDARD GEAR ZIKGM86S30V2
Spider Gear or Carrier Gear Kit or Spider Gear SetCast
Rear AxleGM 8.6"30 SplineFits '00-'06 Case with Casting Numbers 1073 or 7875with Differentialwithout Limited Slip Differential
Rear AxleEscalade Base ModelGM 8.6"30 SplineFits '00-'06 Case with Casting Numbers 1073 or 7875with Differentialwithout Limited Slip Differential
View on
Amazon
AAM Fits: all 2005 Escalade engines 74045936
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Differential Spider and Pinion Gear Kit
Fitment notes — AAM 74045936
Differential Spider and Pinion Gear Kit
with 8.25 (In) Front Axle
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 84526163
🇺🇸 US 🇨🇦 CA
Carrier Gear Kit
Fitment notes — GM GENUINE 84526163
Carrier Gear Kit
Front AxleAWD
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 19178111
🇺🇸 US 🇨🇦 CA
Carrier Gear Kit
Fitment notes — GM GENUINE 19178111
Carrier Gear Kit
Positraction Limited-Slip Rear Axle (G80),8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential1/4 LOCKING GEAR
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines GM95BI
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Differential Carrier Gear Kit33 Spline
Fitment notes — MOTIVE GEAR GM95BI
Differential Carrier Gear Kit33 SplineOpen Differential Internal KitIncl. Side And Pinion Gears/Washers/Pinion Shaft And Lock Bolt Or Roll Pin
Front AxleAWDChrysler 9.25", GM 9.25" IFS, 9.5"1.37" Spline DiameterOpenIncludes Side and Pinion Gears, Washers, Pinion Shaft and Lock Bolt or Roll Pin
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines GM825BI
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Differential Carrier Gear Kit28 Spline
Fitment notes — MOTIVE GEAR GM825BI
Differential Carrier Gear Kit28 Spline
Front AxleAWDGM 8.25" IFSOpenIncludes Side and Pinion Gears, Washers, Pinion Shaft and Lock Bolt or Roll Pin
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines GM86BIL
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Differential Carrier Gear Kit30 Spline
Fitment notes — MOTIVE GEAR GM86BIL
Differential Carrier Gear Kit30 SplineOpen Differential Internal KitIncl. Side And Pinion Gears/Washers/Pinion Shaft And Lock Bolt Or Roll Pin
Rear AxleGM 8.625" (10 Bolt)1.32" Spline DiameterOpenCase# Ending In 7875 and 1073For Cases with Unequal Size 1.5" and 3.75" WindowsFrom 2000.5Includes Side and Pinion Gears, Washers, Pinion Shaft and Lock Bolt or Roll Pin
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines ZIKGM86S30V3
🇺🇸 US
Spider Gear or Carrier Gear Kit or Spider Gear Set
Fitment notes — USA STANDARD GEAR ZIKGM86S30V3
Spider Gear or Carrier Gear Kit or Spider Gear Set
Rear AxleGM 8.6"30 SplineFits 2007 & Newer Case with Casting # 8064with Differentialwithout Limited Slip Differential
Rear AxleEscalade Base ModelGM 8.6"30 SplineFits 2007 & Newer Case with Casting # 8064with Differentialwithout Limited Slip Differential
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines ZIKGM825IFSS
🇺🇸 US
Spider Gear or Carrier Gear Kit or Spider Gear Set
Fitment notes — USA STANDARD GEAR ZIKGM825IFSS
Spider Gear or Carrier Gear Kit or Spider Gear Set
Front AxleAWDGM 8.25"IFS28 Spline
Front AxleAWDEscalade Base ModelGM 8.25"IFS28 Spline
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA16124
🇺🇸 US
Spider Gear or Carrier Gear Kit or Spider Gear SetForged
Fitment notes — USA STANDARD GEAR USA16124
Spider Gear or Carrier Gear Kit or Spider Gear SetForged
Front AxleAWDGM 8.25"IFS28 Spline
Front AxleAWDEscalade Base ModelGM 8.25"IFS28 Spline
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA16146
🇺🇸 US
Spider Gear or Carrier Gear Kit or Spider Gear SetForged
Fitment notes — USA STANDARD GEAR USA16146
Spider Gear or Carrier Gear Kit or Spider Gear SetForged
Rear AxleGM 8.6"30 SplineFits 2007 & Newer Case with Casting # 8064with 8.6 (In) Differentialwithout Limited Slip Differential
Rear AxleEscalade Base ModelGM 8.6"30 SplineFits 2007 & Newer Case with Casting # 8064with 8.6 (In) Differentialwithout Limited Slip Differential
View on
Amazon

This table covers the Differential Spider gears.

Differential Spool

Brand Part Number Markets Notes Buy
DANA Fits: all 2005 Escalade engines 10015388
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Spicer
Fitment notes — DANA 10015388
Spicer
Rear10 Boltwith 30 Spline Teethwith GM 8.5 Axle
View on
Amazon
DANA Fits: all 2005 Escalade engines 10015373
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Spicer
Fitment notes — DANA 10015373
Spicer
10 Boltwith 28 Spline Teethwith GM 8.5 Axle
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines FS1030
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
30 SplineFull Spool
Fitment notes — MOTIVE GEAR FS1030
30 SplineFull Spool30 SplineSteel
GM 8.5" (10 Bolt)Full Spool2.73 Carrier and Up1999 and Later Requires Use of Bearing LM603049 and Race LM6030121998 and Earlier Use Bearing LM102949 and Race LM10291145 Degree Pressure AngleC-Clip Eliminator Required
View on
Amazon
RICHMOND Fits: all 2005 Escalade engines XL5241
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Excel30 Spline
Fitment notes — RICHMOND XL5241
Excel30 Spline
for GM 8.5" (10 Bolt)Full Spool2.73 Carrier and Up1999 and Later Requires Use of Bearing LM603049 and Race LM6030121998 and Earlier Use Bearing LM102949 and Race LM10291145 Degree Pressure AngleC-Clip Eliminator Required
View on
Amazon

This table covers the spools that lock the differential side gears together.

Differential Washer

Brand Part Number Markets Notes Buy
MOTIVE GEAR Popular Fits: all 2005 Escalade engines 3984818
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Differential Pinion Gear Thrust Washer
Fitment notes — MOTIVE GEAR 3984818
Differential Pinion Gear Thrust Washer
RearGM 8.5/8.625"Pinion Gear Thrust Washer
View on
Amazon
USA STANDARD GEAR Popular Fits: all 2005 Escalade engines USA33167
🇺🇸 US
Pinion Gear Washer
Fitment notes — USA STANDARD GEAR USA33167
Pinion Gear Washer
GM 8.6"
Escalade Base ModelGM 8.6"
View on
Amazon
MOTIVE GEAR Fits: all 2005 Escalade engines RGB4LW
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
GM 8.5" or 8.625"Lock Washer
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA33386
🇺🇸 US
Side gear thrust washer
Fitment notes — USA STANDARD GEAR USA33386
Side gear thrust washer
RearGM 8.6"Standard Open
RearEscalade Base ModelGM 8.6"Standard Open
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA33377
🇺🇸 US
Pinion gear Thrust Washer
Fitment notes — USA STANDARD GEAR USA33377
Pinion gear Thrust Washer
FrontAWDGM 8.25"IFS
FrontAWDEscalade Base ModelGM 8.25"IFS
View on
Amazon
USA STANDARD GEAR Fits: all 2005 Escalade engines USA33378
🇺🇸 US
Side gear thrust washer
Fitment notes — USA STANDARD GEAR USA33378
Side gear thrust washer
FrontAWDGM 8.25"IFS
FrontAWDEscalade Base ModelGM 8.25"IFS
View on
Amazon

This table covers the Differential washers.

Drive Shaft

Brand Part Number Markets Notes Buy
SKP Popular Fits: 6.0L V8 SK938186
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits FrontAWD
Fitment notes — SKP SK938186
Fits:
FrontAWDEscalade Base Model or Escalade EXTTrans. code 4L65-Ewith RPO Code M32 (Automatic Transmission, 4L60-E/4L65-E, 4 Speed, Heavy Duty)
or:
FrontEscalade ESVwith RPO Code M32 (Automatic Transmission, 4L60-E/4L65-E, 4 Speed, Heavy Duty)
or:
FrontAWDEscalade Base ModelTrans. code 4L60-E or Trans. code 4L65-Ewith RPO Code NR3 (Single Speed, Open Differential, All Wheel Drive Transfer Case)
or:
FrontAWDEscalade EXTTrans. code 4L65-Ewith RPO Code NR3 (Single Speed, Open Differential, All Wheel Drive Transfer Case)
or:
FrontEscalade Base ModelTrans. code 4L60-E or Trans. code 4L65-Ewith RPO Code NP3 All Wheel Drive (AWD) Transfer Case
or:
FrontEscalade ESVwith RPO Code NP3 All Wheel Drive (AWD) Transfer Case
or:
FrontEscalade ESVwith RPO Code NR3 (Single Speed, Open Differential, All Wheel Drive Transfer Case)
or:
FrontEscalade EXTTrans. code 4L65-Ewith RPO Code NP3 All Wheel Drive (AWD) Transfer Case
View on
Amazon
SKP Popular Fits: 6.0L V8 SK946052
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearAWD
Fitment notes — SKP SK946052
RearAWDEscalade Base Model
View on
Amazon
TOP NOTCH Popular Fits: 6.0L V8 TN1711PS
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontAWD
Fitment notes — TOP NOTCH TN1711PS
FrontAWDEscalade Base Model1 Piece Shaft
View on
Amazon
TOP NOTCH Popular Fits: 6.0L V8 TN1713PS
🇺🇸 US 🇨🇦 CA
RearRWD
Fitment notes — TOP NOTCH TN1713PS
RearRWD1 Piece Shaft
View on
Amazon
CARDONE Fits: 6.0L V8 651010
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearEscalade ESV or Escalade EXT
Fitment notes — CARDONE 651010
RearEscalade ESV or Escalade EXTwith 61.97 (In) Long Driveshaft
View on
Amazon
CARDONE Fits: 6.0L V8 659307
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontEscalade ESV or Escalade EXT
Fitment notes — CARDONE 659307
FrontEscalade ESV or Escalade EXTwith 39.37 (In) Long Driveshaft
View on
Amazon
CARDONE Fits: 6.0L V8 659390
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearAWD
Fitment notes — CARDONE 659390
RearAWDEscalade Base Modelwith 40.24 (In) Long Driveshaft
View on
Amazon
CARDONE Fits: 6.0L V8 651014
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontAWD
Fitment notes — CARDONE 651014
FrontAWDwith 37.48 (In) Long Driveshaft
View on
Amazon
DANA Fits: 6.0L V8 9224376126
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Spicer
Fitment notes — DANA 9224376126
Spicer
RearAWD61.812 IN Tube Lengthwith Slip Yoke Length 7.72 IN
View on
Amazon
DANA Fits: 6.0L V8 50017191623M
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Spicer
Fitment notes — DANA 50017191623M
Spicer
RearAWDwith Slip Yoke Length 8.339 IN63.897 IN Tube Lengthwith Center To Center Universal Joint Dimension 70.468 IN
View on
Amazon
DORMAN Fits: 6.0L V8 938186
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Length: 36.375"
Fitment notes — DORMAN 938186
Length: 36.375"
Fits:
FrontAWDTrans. code 4L60-Ewith RPO Code NR3 (Single Speed, Open Differential, All Wheel Drive Transfer Case)
or:
FrontTrans. code 4L60-Ewith RPO Code NP3 All Wheel Drive (AWD) Transfer Case
or:
FrontAWDEscalade Base Model or Escalade EXTTrans. code 4L65-Ewith RPO Code M32 (Automatic Transmission, 4L60-E/4L65-E, 4 Speed, Heavy Duty)with RPO Code NR3 (Single Speed, Open Differential, All Wheel Drive Transfer Case)
or:
FrontEscalade Base Model or Escalade EXTTrans. code 4L65-Ewith RPO Code M32 (Automatic Transmission, 4L60-E/4L65-E, 4 Speed, Heavy Duty)with RPO Code NP3 All Wheel Drive (AWD) Transfer Case
or:
FrontEscalade ESVwith RPO Code M32 (Automatic Transmission, 4L60-E/4L65-E, 4 Speed, Heavy Duty)with RPO Code NP3 All Wheel Drive (AWD) Transfer Case
or:
FrontEscalade ESVwith RPO Code M32 (Automatic Transmission, 4L60-E/4L65-E, 4 Speed, Heavy Duty)with RPO Code NR3 (Single Speed, Open Differential, All Wheel Drive Transfer Case)
View on
Amazon
DORMAN Fits: 6.0L V8 946051
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Length: 62.05"
Fitment notes — DORMAN 946051
Length: 62.05"
RearEscalade ESV or Escalade EXT
View on
Amazon
DORMAN Fits: 6.0L V8 946052
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Length: 48"
Fitment notes — DORMAN 946052
Length: 48"
RearAWDEscalade Base Model
View on
Amazon
DORMAN Fits: 6.0L V8 986249
🇺🇸 US 🇨🇦 CA
Length: 61.625"
Fitment notes — DORMAN 986249
Length: 61.625"
RearRWD
View on
Amazon
TRAKMOTIVE Fits: 6.0L V8 GMP406
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearEscalade ESV or Escalade EXT
Fitment notes — TRAKMOTIVE GMP406
RearEscalade ESV or Escalade EXTwith 62" Propeller Shaft
View on
Amazon
ULTRA-POWER Fits: 6.0L V8 938186
🇺🇸 US 🇨🇦 CA
36.375" Long
Fitment notes — ULTRA-POWER 938186
36.375" Long
Fits:
Front4WD/AWDor with RPO Code M32 (Automatic Transmission, 4L60-E/4L65-E, 4 Speed, HVY Duty)with RPO Code NP3 All WHL Drive (AWD) Transfer Casewith RPO Code NR3 (Single Speed, Open Differential, All WHL Drive Transfer Case)4WD/AWDor with RPO Code NP3 All WHL Drive (AWD) Transfer Casewith RPO Code NR3 (Single Speed, Open Differential, All WHL Drive Transfer Case)4L60-E Trans4WD/AWD
or:
Frontwith RPO Code M32 (Automatic Transmission, 4L60-E/4L65-E, 4 Speed, HVY Duty)with RPO Code NP3 All WHL Drive (AWD) Transfer Casewith RPO Code NR3 (Single Speed, Open Differential, All WHL Drive Transfer Case)4L60-E-HD Trans or 4L65-E Trans
or:
Frontwith RPO Code M32 (Automatic Transmission, 4L60-E/4L65-E, 4 Speed, HVY Duty)with RPO Code NP3 All WHL Drive (AWD) Transfer Casewith RPO Code NR3 (Single Speed, Open Differential, All WHL Drive Transfer Case)4L65-E Trans
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZDS9531
🇺🇸 US
RearEscalade ESV or Escalade EXT
Fitment notes — USA STANDARD GEAR ZDS9531
RearEscalade ESV or Escalade EXTONE Piece Rear Driveshaft54.25" Long From Center of U/Joint to Center of U/JointMechanics 3R U-Joint At The differential (1.125 In. Cap diameter)32 Spline Female Slip Yoke
View on
Amazon
WJB / INMOTION PARTS Fits: 6.0L V8 WDS38186
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits FrontAWD
Fitment notes — WJB / INMOTION PARTS WDS38186
Fits:
FrontAWDEscalade Base Model or Escalade EXTTrans. code 4L65-Ewith RPO Code NR3 (Single Speed, Open Differential, All Wheel Drive Transfer Case)with RPO Code M32 (Automatic Transmission, 4L60-E/4L65-E, 4 Speed, Heavy Duty)
or:
FrontEscalade ESVwith RPO Code NR3 (Single Speed, Open Differential, All Wheel Drive Transfer Case)with RPO Code M32 (Automatic Transmission, 4L60-E/4L65-E, 4 Speed, Heavy Duty)
or:
FrontAWDTrans. code 4L60-Ewith RPO Code NR3 (Single Speed, Open Differential, All Wheel Drive Transfer Case)
or:
FrontTrans. code 4L60-Ewith RPO Code NP3 All Wheel Drive (AWD) Transfer Case
or:
FrontEscalade Base Model or Escalade EXTTrans. code 4L65-Ewith RPO Code NP3 All Wheel Drive (AWD) Transfer Casewith RPO Code M32 (Automatic Transmission, 4L60-E/4L65-E, 4 Speed, Heavy Duty)
or:
FrontEscalade ESVwith RPO Code NP3 All Wheel Drive (AWD) Transfer Casewith RPO Code M32 (Automatic Transmission, 4L60-E/4L65-E, 4 Speed, Heavy Duty)
View on
Amazon

This table covers the driveshafts that carry torque from the transmission or transfer case.

Drive Shaft Bolt

Brand Part Number Markets Notes Buy
GM GENUINE Fits: all 2005 Escalade engines 11548472
🇺🇸 US 🇨🇦 CA
Fits RearM5/16-24X1.3
Fitment notes — GM GENUINE 11548472
Fits:
RearM5/16-24X1.3
or:
FrontAWDM5/16-24X1.3
View on
Amazon
GM GENUINE Fits: all 2005 Escalade engines 26036835
🇺🇸 US 🇨🇦 CA
FrontAWD
Fitment notes — GM GENUINE 26036835
FrontAWDwith WA 20 OD,M10X1.5X34.9
View on
Amazon

This table covers the Drive Shaft bolts.

Drive Shaft Center Support Bearing

Economy

Brand Part Number Markets Notes Buy
WJB / INMOTION PARTS Popular Fits: 6.0L V8 WCHB88515
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes Bearing and Support
Fitment notes — WJB / INMOTION PARTS WCHB88515
Includes Bearing and Support
1.575 IN Inside Diameterwith Studs in BracketU-Bracket with Attached Mounting Block
View on
Amazon
DEA / MARMON RIDE CONTROL Fits: 6.0L V8 A60510
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
MRC Driveline
Fitment notes — DEA / MARMON RIDE CONTROL A60510
MRC Driveline
with 1.5748" Bearing I.D.without Plate, with StudsHeavy Duty
View on
Amazon
DEA / MARMON RIDE CONTROL Fits: 6.0L V8 A6099
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
MRC Driveline
Fitment notes — DEA / MARMON RIDE CONTROL A6099
MRC Driveline
with 1.5748" Bearing I.D.with Long Rear Metal Extensionwithout Plate, without Studs
View on
Amazon
DEA / MARMON RIDE CONTROL Fits: 6.0L V8 A6064
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
MRC Driveline
Fitment notes — DEA / MARMON RIDE CONTROL A6064
MRC Driveline
with 1.5748" Bearing I.D.with Plate and Studs
View on
Amazon
SKP Fits: 6.0L V8 SKDS6099
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Escalade Base Modelwithout Mounting Studs
Fitment notes — SKP SKDS6099
Fits:
Escalade Base Modelwithout Mounting Studswith U-Shaped Bracketor Escalade ESV or Escalade EXTwith U-Shaped Bracketwithout Mounting Studs
View on
Amazon
SKP Fits: 6.0L V8 SKM6071
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
CenterRound Frame
Fitment notes — SKP SKM6071
CenterRound Framewithout Platewithout StudsExtended Dust Shieldwithout Studs in Bracket
View on
Amazon
WESTAR Fits: 6.0L V8 DS6099
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Bearings I.D. = 1.575" (40mm)
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ANCHOR Popular Fits: 6.0L V8 6071
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Centerwithout Studs in Bracket
Fitment notes — ANCHOR 6071
Centerwithout Studs in Bracketwith 40mm Inside Diameter Bearing(s)58mm Centerline Of Bearing To Mounting Facewithout Platewith U-Shaped Bracketwith 168mm Mounting
View on
Amazon
DANA Popular Fits: 6.0L V8 252120321X
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Spicer Select
Fitment notes — DANA 252120321X
Spicer Select
Center2.630 IN Centerline of Bearing to Mounting Facewith .380 Spacer and M10 X 1.50 Studs
View on
Amazon
BCA Fits: 6.0L V8 NBHB88515
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes Bearing and Support
Fitment notes — BCA NBHB88515
Includes Bearing and Support
4.687 IN Outside Diameter1.575 IN Inside Diameterwith Studs in BracketU-Bracket with Attached Mounting Block
View on
Amazon
DANA Fits: 6.0L V8 25132037X
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Spicer Select
Fitment notes — DANA 25132037X
Spicer Select
Escalade Base Model or Escalade ESV2.200 IN Centerline of Bearing to Mounting Face6.24 IN Center to Center Bolt Holeswith 1.37 IN Bearing Inside Diameter
View on
Amazon
DANA Fits: 6.0L V8 2120321X
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Spicer
Fitment notes — DANA 2120321X
Spicer
Centerwith .380 Spacer and M10 X 1.50 Studs
View on
Amazon
NATIONAL Fits: 6.0L V8 HB88515
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
4.687 IN Outside Diameter1.575 IN Inside Diameter
Fitment notes — NATIONAL HB88515
4.687 IN Outside Diameter1.575 IN Inside Diameterwith Studs in BracketU-Bracket with Attached Mounting BlockIncludes Bearing and Support
View on
Amazon
PIONEER Fits: 6.0L V8 640112
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
1.575" Bearing I.D.6.62" Mounting
Fitment notes — PIONEER 640112
1.575" Bearing I.D.6.62" Mountingwithout Platewithout StudsExtended Dust Shield
View on
Amazon

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Drive Shaft End Yoke

Strap Style (Easier to Install)

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 6.0L V8 88967027
🇺🇸 US 🇨🇦 CA
Includes Deflector
Fitment notes — GM GENUINE 88967027
Includes Deflector
Front DifferentialAWD
View on
Amazon
GM GENUINE Popular Fits: 6.0L V8 19540029
🇺🇸 US 🇨🇦 CA
8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential
View on
Amazon
DORMAN Fits: 6.0L V8 697500
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear DifferentialEscalade ESV or Escalade EXT
Fitment notes — DORMAN 697500
Rear DifferentialEscalade ESV or Escalade EXT30 Spline3R-Series U-Joint8.5" Ring Gear or 8.625" Ring GearCastSeal Included
View on
Amazon
DORMAN Fits: 6.0L V8 697155
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear Differential9.5" Ring Gear
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 USA41078
🇺🇸 US
Drive Shaft Pinion YokeStrap Style
Fitment notes — USA STANDARD GEAR USA41078
Drive Shaft Pinion YokeStrap Style
Front DifferentialAWDEscalade Base ModelGM 8.25"IFSFor Use with Mechanics 3R U-Joint1.125" Cap Diameter
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 USA41092
🇺🇸 US
Drive Shaft Pinion Yoke
Fitment notes — USA STANDARD GEAR USA41092
Drive Shaft Pinion Yoke
Rear DifferentialEscalade Base ModelGM 8.6"Pinion YokeFor Use with 1350 U-Joint1.188" Cap DiameterStrap StyleForged
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 USA41071
🇺🇸 US
Drive Shaft Pinion Yoke
Fitment notes — USA STANDARD GEAR USA41071
Drive Shaft Pinion Yoke
Rear DifferentialEscalade Base ModelGM 8.5 & 8.6"Pinion Yoke30 SplineStrap StyleMechanic 3R U-Joint1.125" Cap DiameterInside Snap Ring
View on
Amazon

U-Bolt Style (Stronger)

Brand Part Number Markets Notes Buy
DANA Fits: 6.0L V8 10025466
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Spicer
Fitment notes — DANA 10025466
Spicer
Rear DifferentialEscalade Base Modelwith 30 Splineswith Dana 1350 Series Drive Shaftwith GM 8.5 & 8.6 Axles
View on
Amazon
DORMAN Fits: 6.0L V8 697699
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front DifferentialAWD
Fitment notes — DORMAN 697699
Front DifferentialAWD8.25" Ring Gear
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 USA41093
🇺🇸 US
Drive Shaft Pinion Yoke
Fitment notes — USA STANDARD GEAR USA41093
Drive Shaft Pinion Yoke
Rear DifferentialEscalade Base ModelGM 8.6"Pinion YokeFor Use with 1350 U-Joint1.188" Cap DiameterU-Bolt StyleForged
View on
Amazon

This table covers the Drive Shaft End yokes.

Drive Shaft Retainer

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.0L V8 23107857
🇺🇸 US 🇨🇦 CA
Fits Four Wheel Steering (NYS)For Vehicles with 30MM U-Joint Bearing Cupsor RWD
Fitment notes — GM GENUINE 23107857
Fits:
Four Wheel Steering (NYS)For Vehicles with 30MM U-Joint Bearing Cupsor RWDTrans.Code 4L65-E4 speed Automatic trans.For Vehicles with 30MM U-Joint Bearing CupsExc. Four Wheel Steering (NYS)
View on
Amazon
GM GENUINE Fits: 6.0L V8 23107858
🇺🇸 US 🇨🇦 CA
Fits FrontAWD
Fitment notes — GM GENUINE 23107858
Fits:
FrontAWD
or:
Exc. Spring Special Sales Package (B2E),High Output Engine Package (B4V),Four Wheel Steering (NYS)
View on
Amazon

This table covers the Drive Shaft retainers.

Drive Shaft Slip Yoke

Brand Part Number Markets Notes Buy
AAM Popular Fits: 6.0L V8 40006885
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front Driveshaft at Transfer CaseAWD
View on
Amazon
DORMAN Popular Fits: 6.0L V8 697558
🇺🇸 US 🇨🇦 CA
Fits Rear Driveshaft At TransmissionRWD
Fitment notes — DORMAN 697558
Fits:
Rear Driveshaft At TransmissionRWDTrans. code 4L60-Ewith RPO Code GU6 (3.42 Axle Ratio)
or:
Rear Driveshaft At TransmissionRWDTrans. code 4L60-Ewith RPO Code GU5 (3.23 Axle Ratio)
View on
Amazon
DORMAN Fits: 6.0L V8 697584
🇺🇸 US 🇨🇦 CA
Rear Driveshaft at TransmissionRWD
Fitment notes — DORMAN 697584
Rear Driveshaft at TransmissionRWDTrans. code 4L60-Ewith RPO Code GT4 (3.73 Axle Ratio)without RPO Code PPV (Police Pursuit Vehicle)
View on
Amazon
DORMAN Fits: 6.0L V8 697504
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear Driveshaft At Transfer CaseAWD
Fitment notes — DORMAN 697504
Rear Driveshaft At Transfer CaseAWDEscalade Base Model
View on
Amazon
DORMAN Fits: 6.0L V8 697518
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front Driveshaft at Transfer CaseAWD
View on
Amazon
GM GENUINE Fits: 6.0L V8 12471638
🇺🇸 US 🇨🇦 CA
Front Driveshaft at Transfer CaseAWD
Fitment notes — GM GENUINE 12471638
Front Driveshaft at Transfer CaseAWDHAS FORGING OF 40006884EXTERNAL SPLINED
View on
Amazon
GM GENUINE Fits: 6.0L V8 88963576
🇺🇸 US 🇨🇦 CA
Escalade ESV
View on
Amazon
GM GENUINE Fits: 6.0L V8 07848635
🇺🇸 US 🇨🇦 CA
RWDTrans.Code 4L60-E
Fitment notes — GM GENUINE 07848635
RWDTrans.Code 4L60-E4 Speed Automatic Trans.without BALANCER3.23 Rear Axle Ratio (GU5),3.42 Rear Axle Ratio (GU6)
View on
Amazon

This table covers the Drive Shaft Slip yokes.

Drive Shaft Slip Yoke Seal

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.0L V8 24232324
🇺🇸 US 🇨🇦 CA
RWDTrans.Code 4L60-E
Fitment notes — GM GENUINE 24232324
RWDTrans.Code 4L60-E4 Speed Automatic Trans.NON-BOOTED, LIP OF METAL CASE IS UNPAINTED GRAY
View on
Amazon
GM GENUINE Fits: 6.0L V8 24232325
🇺🇸 US 🇨🇦 CA
Fits Escalade ESV or Escalade EXTBOOTED, LIP OF METAL CASE IS UNPAINTED GRAY
Fitment notes — GM GENUINE 24232325
Fits:
Escalade ESV or Escalade EXTBOOTED, LIP OF METAL CASE IS UNPAINTED GRAY
or:
RWDTrans.Code 4L60-E4 Speed Automatic Trans.BOOTED, LIP OF METAL CASE IS UNPAINTED GRAY
or:
Escalade Base ModelTrans.Code 4L65-E4 Speed Automatic Trans.BOOTED, LIP OF METAL CASE IS UNPAINTED GRAY
View on
Amazon

This table covers the seals at the Drive Shaft Slip Yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Gear Oil

Brand Part Number Markets Notes Buy
MOBIL Popular Fits: 6.0L V8 104361
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Synthetic Gear Lube Limited Slip 75W-901 Quart
Fitment notes — MOBIL 104361
Synthetic Gear Lube Limited Slip 75W-901 Quart
Front DifferentialSelectable Four-Wheel Drive
View on
Amazon
VALVOLINE Popular Fits: 6.0L V8 VV975
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Advanced Full Synthetic SAE 75W-90 Gear Oil1 Quart
Fitment notes — VALVOLINE VV975
Advanced Full Synthetic SAE 75W-90 Gear Oil1 Quart
Fits:
Rear Differential
or:
Front DifferentialAWD
View on
Amazon
VALVOLINE Fits: 6.0L V8 VV820
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Daily Protection SAE 75W-90 Gear Oil1 Quart
Fitment notes — VALVOLINE VV820
Daily Protection SAE 75W-90 Gear Oil1 Quart
Fits:
Rear Differential
or:
Front DifferentialAWD
View on
Amazon
VALVOLINE Fits: 6.0L V8 889785
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Full Synthetic SAE 75W-90 Gear Oil1 Quart Flex Fill
Fitment notes — VALVOLINE 889785
Full Synthetic SAE 75W-90 Gear Oil1 Quart Flex Fill
Fits:
Rear Differential
or:
Front DifferentialAWD
View on
Amazon
VALVOLINE Fits: 6.0L V8 882505
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Advanced Full Synthetic SAE 75W-90 Gear Oil1 Gallon
Fitment notes — VALVOLINE 882505
Advanced Full Synthetic SAE 75W-90 Gear Oil1 Gallon
Fits:
Rear Differential
or:
Front DifferentialAWD
View on
Amazon
VALVOLINE Fits: 6.0L V8 723856
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Advanced Full Synthetic SAE 75W-90 Gear Oil5 Gallon
Fitment notes — VALVOLINE 723856
Advanced Full Synthetic SAE 75W-90 Gear Oil5 Gallon
Fits:
Rear Differential
or:
Front DifferentialAWD
View on
Amazon
VALVOLINE Fits: 6.0L V8 VV822
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Daily Protection SAE 75W-90 Gear Oil16 Gallon KEG
Fitment notes — VALVOLINE VV822
Daily Protection SAE 75W-90 Gear Oil16 Gallon KEG
Fits:
Rear Differential
or:
Front DifferentialAWD
View on
Amazon

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle.

Gear Oil Additive

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Fits: 6.0L V8 USA15018
🇺🇸 US
Friction ModifierPositraction Additive
Fitment notes — USA STANDARD GEAR USA15018
Friction ModifierPositraction Additive4oz.
Escalade Base Model
View on
Amazon

This table covers the Gear Oil additives.

Ring Gear Spacer

Brand Part Number Markets Notes Buy
MOTIVE GEAR Fits: 6.0L V8 085050C
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear DifferentialGM 8.5"/8.625"
View on
Amazon
MOTIVE GEAR Fits: 6.0L V8 085050
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Ring Gear Spacer10 Bolt
Fitment notes — MOTIVE GEAR 085050
Ring Gear Spacer10 Bolt
Rear DifferentialGM 8.5"/8.625"Includes Spacer, Bolts, Loctite
View on
Amazon

This table covers the Ring Gear spacers.

Set Up Bearing

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Fits: 6.0L V8 USA56045
🇺🇸 US
Differential Pinion set up bearingsFits HM802048 Pinion Bearing
Fitment notes — USA STANDARD GEAR USA56045
Differential Pinion set up bearingsFits HM802048 Pinion Bearing
Fits:
Front InnerAWDEscalade Base ModelGM 8.25"IFS
or:
Rear InnerEscalade Base ModelGM 8.6"
View on
Amazon

This table covers the Set Up bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Shim Driver

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Fits: 6.0L V8 USA56077
🇺🇸 US
Carrier Shim Driver Kit
Fitment notes — USA STANDARD GEAR USA56077
Carrier Shim Driver Kit
Escalade Base ModelGM 8.6"
View on
Amazon

This table covers the drivers used to install a shim.

Spider Gear Thrust Washer

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Fits: 6.0L V8 USA33385
🇺🇸 US
Pinion gear Thrust Washer
Fitment notes — USA STANDARD GEAR USA33385
Pinion gear Thrust Washer
RearEscalade Base ModelGM 8.6"Standard OpenEaton with 0.795 in. CROSS Pin
View on
Amazon

This table covers the Spider Gear Thrust washers.

Stub Axle

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Fits: 6.0L V8 ZAK630420
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front LeftAWD
Fitment notes — USA STANDARD GEAR ZAK630420
Front LeftAWDGM 8.25 In. IFS FrontInner Stub Axle Shaft28 Spline5.06" Length
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZAK630425
🇺🇸 US 🇨🇦 CA
Front Right InnerGM 8.25" IFS
Fitment notes — USA STANDARD GEAR ZAK630425
Front Right InnerGM 8.25" IFSFront Stub Axle ShaftAWD28 Spline19.6" Length
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZAG12471491
🇺🇸 US
Front Right InnerAWD
Fitment notes — USA STANDARD GEAR ZAG12471491
Front Right InnerAWDEscalade Base ModelGM 8.25"IFS28 Spline19.6" Length
View on
Amazon

This table covers the Stub axles. Typical signs include a click in a turn, vibration with speed, or grease around the boot. Torque the axle nut to the method in the notes.

Transfer Case Adapter

Brand Part Number Markets Notes Buy
DORMAN Fits: 6.0L V8 926890
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Escalade ESV
Fitment notes — DORMAN 926890
Fits:
Escalade ESV
or:
Escalade EXTTrans. code 4L65-Eor Escalade Base ModelTrans. code 4L60-E or Trans. code 4L65-E
View on
Amazon
GM GENUINE Fits: 6.0L V8 15724744
🇺🇸 US 🇨🇦 CA
AWD
View on
Amazon

This table covers the Transfer Case adapters.

Transfer Case Adapter Seal

Brand Part Number Markets Notes Buy
DORMAN Fits: 6.0L V8 926831
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
GM GENUINE Fits: 6.0L V8 15969051
🇺🇸 US 🇨🇦 CA
AWDCASE TO ADAPTER
View on
Amazon

This table covers the seals at the Transfer Case Adapter. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Transfer Case Bolt

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.0L V8 88996722
🇺🇸 US 🇨🇦 CA
Fits AWDHex with Flat aluminum WA,M10X1.5X40
Fitment notes — GM GENUINE 88996722
Fits:
AWDHex with Flat aluminum WA,M10X1.5X40Housing Boltor AWDHex with Flat aluminum WA,M10X1.5X402 Speed Manual Shift Transfer Case (NP2)Housing Boltor AWDHex with Flat aluminum WA,M10X1.5X40Active 2 Speed Push Button Control Transfer Case (NP8)Housing Bolt
View on
Amazon

This table covers the Transfer Case bolts.

Transfer Case Control Module

Brand Part Number Markets Notes Buy
CARDONE Fits: 6.0L V8 7342129
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Remanufactured
Fitment notes — CARDONE 7342129
Remanufactured
AWD
View on
Amazon
GM GENUINE Fits: 6.0L V8 12590219
🇺🇸 US 🇨🇦 CA
AWDElectric Shift 2 Speed Transfer Case (NP1),Active 2 Speed Push Button Control Transfer Case (NP8)
View on
Amazon

This table covers the Transfer Case control modules.

Transfer Case Drive Chain

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.0L V8 19151772
🇺🇸 US 🇨🇦 CA
AWD
View on
Amazon
GM GENUINE Fits: 6.0L V8 12474602
🇺🇸 US 🇨🇦 CA
AWDActive 2 Speed Push Button Control Transfer Case (NP8)
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZTCHHV072
🇺🇸 US
Escalade Base Model or Escalade EXTNP149
Fitment notes — USA STANDARD GEAR ZTCHHV072
Escalade Base Model or Escalade EXTNP14949 Links, Pitch: 0.375 inch, 1-1/4 inches WideReplaces OE Part Number(s) 31534, 12474602, 5135692AA
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZTCHHV076
🇺🇸 US
AWDBW4481
Fitment notes — USA STANDARD GEAR ZTCHHV076
AWDBW448142 Links, 1-1/4 Inch Wide
View on
Amazon

This table covers the chains that drive the transfer case.

Transfer Case Driven Sprocket Retaining Ring

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.0L V8 12547477
🇺🇸 US 🇨🇦 CA
Fits AWDOUTER
Fitment notes — GM GENUINE 12547477
Fits:
AWDOUTER2.52 Speed Manual Shift Transfer Case (NP2)
or:
AWDOUTERActive 2 Speed Push Button Control Transfer Case (NP8)2.5
View on
Amazon

This table covers the Transfer Case Driven Sprocket Retaining rings.

Transfer Case Fluid

Dexron

Brand Part Number Markets Notes Buy
VALVOLINE Popular Fits: 6.0L V8 798153
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Dexron III / Mercon ATF1 Quart
Fitment notes — VALVOLINE 798153
Dexron III / Mercon ATF1 Quart
AWD
View on
Amazon
VALVOLINE Fits: 6.0L V8 822405
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Dexron VI/Mercon LV ATF1 Quart
Fitment notes — VALVOLINE 822405
Dexron VI/Mercon LV ATF1 Quart
AWD
View on
Amazon
VALVOLINE Fits: 6.0L V8 773636
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Dexron III / Mercon ATF1 Gallon
Fitment notes — VALVOLINE 773636
Dexron III / Mercon ATF1 Gallon
AWD
View on
Amazon
VALVOLINE Fits: 6.0L V8 883572
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Dexron VI/Mercon LV ATF1 Gallon
Fitment notes — VALVOLINE 883572
Dexron VI/Mercon LV ATF1 Gallon
AWD
View on
Amazon
VALVOLINE Fits: 6.0L V8 VV349
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Dexron III / Mercon ATF5 Gallon Pail
Fitment notes — VALVOLINE VV349
Dexron III / Mercon ATF5 Gallon Pail
AWD
View on
Amazon

Mercon

Brand Part Number Markets Notes Buy
VALVOLINE Fits: 6.0L V8 822345
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Mercon V ATF1 Quart
Fitment notes — VALVOLINE 822345
Mercon V ATF1 Quart
AWD
View on
Amazon

Multi-Vehicle

Brand Part Number Markets Notes Buy
VALVOLINE Popular Fits: 6.0L V8 VV3246
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Max Life Multi-Vehicle or Maxlife Multi-Vehicle Full Synthetic ATF1 Quart
Fitment notes — VALVOLINE VV3246
Max Life Multi-Vehicle or Maxlife Multi-Vehicle Full Synthetic ATF1 QuartDEXRON VI, MERCON LV, DEX/MERC
AWD
View on
Amazon
VALVOLINE Popular Fits: 6.0L V8 773775
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Max Life Multi-Vehicle or Maxlife Multi-Vehicle Full Synthetic ATF1 Gallon
Fitment notes — VALVOLINE 773775
Max Life Multi-Vehicle or Maxlife Multi-Vehicle Full Synthetic ATF1 Gallon
AWD
View on
Amazon
LUCAS OIL Fits: 6.0L V8 10052
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SURE-SHIFT SEMI-SYNTHETIC AUTOMATIC TRANSMISSION FLUID1 qt
Fitment notes — LUCAS OIL 10052
SURE-SHIFT SEMI-SYNTHETIC AUTOMATIC TRANSMISSION FLUID1 qt
AWD
View on
Amazon
LUCAS OIL Fits: 6.0L V8 10418
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FULL SYNTHETIC MULTI-VEHICLE AUTOMATIC TRANSMISSION FLUID1 qt
Fitment notes — LUCAS OIL 10418
FULL SYNTHETIC MULTI-VEHICLE AUTOMATIC TRANSMISSION FLUID1 qt
AWD
View on
Amazon
LUCAS OIL Fits: 6.0L V8 18007
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Full Synthetic Multi-Vehicle Automatic Transmission Fluid6 Gallon
Fitment notes — LUCAS OIL 18007
Full Synthetic Multi-Vehicle Automatic Transmission Fluid6 Gallon
AWD
View on
Amazon
VALVOLINE Fits: 6.0L V8 881051
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Maxlife Multi-Vehicle Full Synthetic ATF5 Gallon Bay Box
Fitment notes — VALVOLINE 881051
Maxlife Multi-Vehicle Full Synthetic ATF5 Gallon Bay Box
AWD
View on
Amazon

Type III (H)

Brand Part Number Markets Notes Buy
ACDELCO Fits: 6.0L V8 109240
🇺🇸 US
1 Quart
Fitment notes — ACDELCO 109240
1 Quart
AWD
View on
Amazon
ACDELCO Fits: 6.0L V8 109241
🇺🇸 US
1 Gallon
Fitment notes — ACDELCO 109241
1 Gallon
AWD
View on
Amazon

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable.

Transfer Case Gasket

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: 6.0L V8 917562
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
FEL-PRO Popular Fits: 6.0L V8 72770
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with Borg-Warner 4481 Transfer Casewith Full Time 4WD
Fitment notes — FEL-PRO 72770
with Borg-Warner 4481 Transfer Casewith Full Time 4WD1 Speedwith 6 Bolt Holes
View on
Amazon
ELRING Fits: 6.0L V8 088130
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Number of Mounting Bores: 6
View on
Amazon
GM GENUINE Fits: 6.0L V8 86816628
🇺🇸 US 🇨🇦 CA
AWD
View on
Amazon
MAHLE / CLEVITE Fits: 6.0L V8 B32793
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Paper
View on
Amazon
SKP Fits: 6.0L V8 SK917562
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZTTSK4484
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Transfer Case Gasket Seal Kit
Fitment notes — USA STANDARD GEAR ZTTSK4484
Transfer Case Gasket Seal Kit
BW4481/BW4482/BW4484 Transfer Case, Gasket and Seal Kit
View on
Amazon
VICTOR REINZ Fits: 6.0L V8 711410700
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
6 Boltwith Borg-Warner 4481 - 1 Speed Transfer Case
Fitment notes — VICTOR REINZ 711410700
6 Boltwith Borg-Warner 4481 - 1 Speed Transfer Casewith Full Time 4WD
View on
Amazon

This table covers the gaskets that seal the Transfer Case. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Transfer Case Housing

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Popular Fits: 6.0L V8 ZTNP3060330961KIT
🇺🇸 US
RearEscalade EXT
Fitment notes — USA STANDARD GEAR ZTNP3060330961KIT
RearEscalade EXTNP246, NP261LD, NP261HD, NP263HDRear Case Half Kit, Includes rear case, rear seal, oval snap ring plug, drain and fill plugs, and Oil pump clipwith NP149 Transfer CaseReplaces OE #(S) 30961, 30603, 19133141, 12474949
View on
Amazon
USA STANDARD GEAR Popular Fits: 6.0L V8 ZTNP3060330961
🇺🇸 US
RearEscalade EXT
Fitment notes — USA STANDARD GEAR ZTNP3060330961
RearEscalade EXTNP246, NP261LD, NP261HD, NP263HDRear Case HalfReplaces OE Part Number(s) 30961, 30603, 19133141, 12474949with NP149 Transfer Case
View on
Amazon
DORMAN Fits: 6.0L V8 917561
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearVacuum Shift Transfer Case
Fitment notes — DORMAN 917561
RearVacuum Shift Transfer Casewith RPO Code NP8 (2 Speed, Push Button Shift, Transfer Case)
View on
Amazon
DORMAN Fits: 6.0L V8 600124
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontManual Shift Transfer Case
View on
Amazon
MOTIVE GEAR Fits: 6.0L V8 MG620001
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearAWD
Fitment notes — MOTIVE GEAR MG620001
RearAWDPump Area Reinforced
View on
Amazon
SKP Fits: 6.0L V8 SK917561
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits RearRPO Code NP8 (2 Speed, Push Button Control Transfer Case)
Fitment notes — SKP SK917561
Fits:
RearRPO Code NP8 (2 Speed, Push Button Control Transfer Case)
or:
RearVacuum Shift Transfer Case
View on
Amazon

This table covers the Transfer Case housings.

Transfer Case Input Shaft Bearing

Brand Part Number Markets Notes Buy
NATIONAL Popular Fits: 6.0L V8 211
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Escalade ESV
Fitment notes — NATIONAL 211
Fits:
Escalade ESV
or:
AWDEscalade Base ModelEscalade EXTwith Borg-Warner 4481 Transfer Case1 Speed
View on
Amazon
TIMKEN Popular Fits: 6.0L V8 B5020
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Needle Bearing2.375 Housing Diameter
Fitment notes — TIMKEN B5020
Needle Bearing2.375 Housing Diameter
RearAWDNew Process Transfer Cases
View on
Amazon
BCA Fits: 6.0L V8 NB211
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with Borg Warner 4481 Transfer Casewith Full Time 4WD
Fitment notes — BCA NB211
with Borg Warner 4481 Transfer Casewith Full Time 4WDwith 1 Speed Transfer Case
View on
Amazon
PIONEER Fits: 6.0L V8 768036
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Escalade Base ModelTrans. code 4L60-E or Trans. code 4L65-E
Fitment notes — PIONEER 768036
Escalade Base ModelTrans. code 4L60-E or Trans. code 4L65-EStator to Input Shaft Bearing
View on
Amazon
SKF Fits: 6.0L V8 6211J
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Borg Warner Transfer Case
View on
Amazon
TIMKEN Fits: 6.0L V8 110CB
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
0.627 in. Width
Fitment notes — TIMKEN 110CB
0.627 in. Width
FrontAWDNew Process Transfer Cases
View on
Amazon
TIMKEN Fits: 6.0L V8 211TB
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
0.8268 in. Width
Fitment notes — TIMKEN 211TB
0.8268 in. Width
AWDBorg Warner 4485
View on
Amazon
WJB / INMOTION PARTS Fits: 6.0L V8 RB6211
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Escalade ESV
Fitment notes — WJB / INMOTION PARTS RB6211
Fits:
Escalade ESV
or:
AWDEscalade Base Model or Escalade EXTwith Borg-Warner 4481 Transfer Case1 Speed
View on
Amazon

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Transfer Case Input Shaft Pilot Bearing

Brand Part Number Markets Notes Buy
TIMKEN Fits: 6.0L V8 BK3026
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Needle Bearing
Fitment notes — TIMKEN BK3026
Needle Bearing
AWDBorg Warner 4485
View on
Amazon
WJB / INMOTION PARTS Fits: 6.0L V8 WRBK3026
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits AWDEscalade Base Modelor Escalade ESV or Escalade EXT
Fitment notes — WJB / INMOTION PARTS WRBK3026
Fits:
AWDEscalade Base Modelor Escalade ESV or Escalade EXTwith Borg-Warner 4481 Transfer Case1 Speed
View on
Amazon

This table covers the Transfer Case Input Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Transfer Case Input Shaft Repair Sleeve

Brand Part Number Markets Notes Buy
BCA Fits: 6.0L V8 NS99189
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
NATIONAL Fits: 6.0L V8 99189
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits AWDEscalade Base Modelor Escalade ESV or Escalade EXT
Fitment notes — NATIONAL 99189
Fits:
AWDEscalade Base Modelor Escalade ESV or Escalade EXTwith Borg-Warner 4481 Transfer Case1 Speed
View on
Amazon
SCHAEFFLER Fits: 6.0L V8 SR3507
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Escalade Base Model or Escalade ESV
View on
Amazon
WJB / INMOTION PARTS Fits: 6.0L V8 WS99189
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits AWDEscalade Base Modelor Escalade ESV or Escalade EXT
Fitment notes — WJB / INMOTION PARTS WS99189
Fits:
AWDEscalade Base Modelor Escalade ESV or Escalade EXTwith Borg-Warner 4481 Transfer Case1 Speed
View on
Amazon

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface.

Transfer Case Input Shaft Seal

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 6.0L V8 12547466
🇺🇸 US 🇨🇦 CA
Fits AWDActive 2 Speed Push Button Control Transfer Case (NP8)
Fitment notes — GM GENUINE 12547466
Fits:
AWDActive 2 Speed Push Button Control Transfer Case (NP8)
or:
AWD2 Speed Manual Shift Transfer Case (NP2)
View on
Amazon
NATIONAL Popular Fits: 6.0L V8 710664
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Escalade ESV
Fitment notes — NATIONAL 710664
Fits:
Escalade ESV
or:
AWDEscalade Base Model or Escalade EXTwith Borg-Warner 4481 Transfer Case1 Speed
View on
Amazon
SKF Popular Fits: 6.0L V8 18771
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Borg Warner Transfer Case
View on
Amazon
BCA Fits: 6.0L V8 NS710664
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
AWDwith Borg Warner 4481 Transfer Case
Fitment notes — BCA NS710664
AWDwith Borg Warner 4481 Transfer Casewith Full Time 4WDwith 1 Speed Transfer Case
View on
Amazon
BCA Fits: 6.0L V8 NS472636
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
AWDEscalade Base Model
Fitment notes — BCA NS472636
AWDEscalade Base Modelwith New Process 149 Transfer Casewith Full Time 4WDwith 1 Speed Transfer Case
View on
Amazon
GM GENUINE Fits: 6.0L V8 12474423
🇺🇸 US 🇨🇦 CA
AWD
View on
Amazon
SCHAEFFLER Fits: 6.0L V8 SS3821
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Escalade Base Model57.15 mm Shaft Diameter
View on
Amazon
SCHAEFFLER Fits: 6.0L V8 SS2944
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Escalade EXT47.981 mm Shaft Diameter
View on
Amazon
SKF Fits: 6.0L V8 18878
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
New Process 149
View on
Amazon
TIMKEN Fits: 6.0L V8 224840
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
AWDNew Process 149
View on
Amazon
TIMKEN Fits: 6.0L V8 710664
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
AWDBorg Warner 4481
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZTSEA1900044019
🇺🇸 US
Fits InputFront
Fitment notes — USA STANDARD GEAR ZTSEA1900044019
Fits:
InputFrontAWDEscalade Base ModelBW4406, BW4473 & BW4481
or:
InputFrontEscalade ESV or Escalade EXTBW4406, BW4473 & BW4481
View on
Amazon
WJB / INMOTION PARTS Fits: 6.0L V8 WS472636
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
AWDEscalade Base Model
Fitment notes — WJB / INMOTION PARTS WS472636
AWDEscalade Base Modelwith New Process 149 Transfer Casewith Full Time 4WD1 Speed
View on
Amazon
WJB / INMOTION PARTS Fits: 6.0L V8 WS710664
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Escalade ESV
Fitment notes — WJB / INMOTION PARTS WS710664
Fits:
Escalade ESV
or:
AWDEscalade Base Model or Escalade EXTwith Borg-Warner 4481 Transfer Case1 Speed
View on
Amazon

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Transfer Case Motor

New

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: 6.0L V8 600908
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
AWDEscalade Base Model
Fitment notes — DORMAN 600908
AWDEscalade Base ModelFits Borg Warner 4484 Transfer CaseRectangular Plug with 7 Pinswith RPO Code NR4 (2 Speed, Open Differential, All Wheel Drive Transfer Case)
View on
Amazon
SKP Popular Fits: 6.0L V8 SK600908
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits AWDEscalade Base Model
Fitment notes — SKP SK600908
Fits:
AWDEscalade Base ModelFits Borg Warner 4484 Transfer Cas
or:
AWDEscalade Base ModelRectangular Plug with 7 Pinsor AWDEscalade Base Modelwith RPO Code NR4 (All Wheel Drive Transfer Case, Open Differential, 2 Speed)
View on
Amazon
AUTOTECNICA Fits: 6.0L V8 GM0518216
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Escalade ESV or Escalade EXT
Fitment notes — AUTOTECNICA GM0518216
Fits:
Escalade ESV or Escalade EXT
or:
AWDEscalade Base ModelFits Borg Warner 4484 Transfer Casewith RPO Code NR4 (2 Speed, Open Differential, All Wheel Drive Transfer Case)Rectangular Plug with 7 Pins
View on
Amazon
AUTOTECNICA Fits: 6.0L V8 GM0419447
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with Active Transfer Case (RPO NP8)Mounting Hole Quantity: 3
Fitment notes — AUTOTECNICA GM0419447
with Active Transfer Case (RPO NP8)Mounting Hole Quantity: 3Terminal Type: Spade
View on
Amazon
LARES Fits: 6.0L V8 30350
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
AWDEscalade Base Model
Fitment notes — LARES 30350
AWDEscalade Base ModelFits Borg Warner 4484 Transfer Casewith RPO Code NR4 (2 Speed, Open Differential, All Wheel Drive Transfer Case)Rectangular Plug with 7 Pins
View on
Amazon
LARES Fits: 6.0L V8 30345
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Escalade Base ModelFits NVG246 Transfer Case
Fitment notes — LARES 30345
Escalade Base ModelFits NVG246 Transfer Casewith 4 Position Selector Switchwith RPO Code NP8 (2 Speed, Push Button Shift, Transfer Case)
View on
Amazon
WAI GLOBAL Fits: 6.0L V8 TC1013
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
AWDEscalade Base Model
Fitment notes — WAI GLOBAL TC1013
AWDEscalade Base ModelFits Borg Warner 4484 Transfer CaseRectangular Plug with 7 Pinswith RPO Code NR4 2 SpeedOpen DifferentialAll Wheel Drive Transfer Case
View on
Amazon
WAI GLOBAL Fits: 6.0L V8 TC1001
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits NVG246 Transfer Casewith 4 Position Selector Switch
Fitment notes — WAI GLOBAL TC1001
Fits:
NVG246 Transfer Casewith 4 Position Selector Switchwith RPO Code NP8 2 SpeedPush Button ShiftTransfer Case
View on
Amazon

Remanufactured

Brand Part Number Markets Notes Buy
CARDONE Fits: 6.0L V8 48109
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Remanufactured
Fitment notes — CARDONE 48109
Remanufactured
AWD
View on
Amazon

This table covers the Transfer Case motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor.

Transfer Case Oil Drain Plug

Brand Part Number Markets Notes Buy
DORMAN Fits: 6.0L V8 090205
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
AWD
View on
Amazon
GM GENUINE Fits: 6.0L V8 15032997
🇺🇸 US 🇨🇦 CA
Fits AWDActive 2 Speed Push Button Control Transfer Case (NP8)
Fitment notes — GM GENUINE 15032997
Fits:
AWDActive 2 Speed Push Button Control Transfer Case (NP8)
or:
AWD2 Speed Manual Shift Transfer Case (NP2)
View on
Amazon

This table covers the Transfer Case Oil drain plugs.

Transfer Case Oil Pump

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.0L V8 12547630
🇺🇸 US 🇨🇦 CA
Includes Bolts
Fitment notes — GM GENUINE 12547630
Includes Bolts
AWDBushing, Housings and RotorsActive 2 Speed Push Button Control Transfer Case (NP8)
View on
Amazon
GM GENUINE Fits: 6.0L V8 12478084
🇺🇸 US 🇨🇦 CA
Fits AWDIncludes Bolt, Bushing, Gears and Housing
Fitment notes — GM GENUINE 12478084
Fits:
AWDIncludes Bolt, Bushing, Gears and Housing2 Speed Manual Shift Transfer Case (NP2)
or:
AWDIncludes Bolt, Bushing, Gears and HousingElectric Shift 2 Speed Transfer Case (NP1)
View on
Amazon

This table covers the Transfer Case Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.

Transfer Case Oil Pump Housing Repair Sleeve

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.0L V8 89059653
🇺🇸 US 🇨🇦 CA
Fits AWDAT OIL PUMP
Fitment notes — GM GENUINE 89059653
Fits:
AWDAT OIL PUMPOIL PUMP WEAR SLEEVEActive 2 Speed Push Button Control Transfer Case (NP8)
or:
AWDAT OIL PUMPOIL PUMP WEAR SLEEVE2 Speed Manual Shift Transfer Case (NP2)
View on
Amazon

This table covers the wear sleeves used to restore a Transfer Case Oil Pump Housing seal surface.

Transfer Case Output Shaft Bearing

Economy

Brand Part Number Markets Notes Buy
WJB / INMOTION PARTS Popular Fits: 6.0L V8 RB6209N
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits RearAWD
Fitment notes — WJB / INMOTION PARTS RB6209N
Fits:
RearAWDEscalade Base Model
or:
RearEscalade ESV or Escalade EXTwith Borg-Warner 4481 Transfer Case1 Speed
View on
Amazon
WJB / INMOTION PARTS Fits: 6.0L V8 RB6009
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits FrontAWD
Fitment notes — WJB / INMOTION PARTS RB6009
Fits:
FrontAWDEscalade Base Model or Escalade EXT
or:
FrontEscalade ESVwith Borg-Warner 4481 Transfer Case1 Speed
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 6.0L V8 88984506
🇺🇸 US 🇨🇦 CA
Rear RearwardAWD
View on
Amazon
NATIONAL Popular Fits: 6.0L V8 109
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontAWD
Fitment notes — NATIONAL 109
FrontAWDwith Borg-Warner 4481 Transfer Case1 Speed
View on
Amazon
BCA Fits: 6.0L V8 NB109
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Frontwith Borg Warner 4481 Transfer Case
Fitment notes — BCA NB109
Frontwith Borg Warner 4481 Transfer Casewith Full Time 4WDwith 1 Speed Transfer Case
View on
Amazon
SCHAEFFLER Fits: 6.0L V8 6209N
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearEscalade Base Model or Escalade ESV
Fitment notes — SCHAEFFLER 6209N
RearEscalade Base Model or Escalade ESV19 MM Width85 mm Outside Diameter45 mm Inside Diameter
View on
Amazon
SCHAEFFLER Fits: 6.0L V8 6209
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear19 MM Width
Fitment notes — SCHAEFFLER 6209
Rear19 MM Width85 mm Outside Diameter45 mm Inside Diameterwith Borg Warner Transfer Case
View on
Amazon
SKF Fits: 6.0L V8 6209J
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearBorg Warner Transfer Case
View on
Amazon
SKF Fits: 6.0L V8 6009J
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontBorg Warner Transfer Case
View on
Amazon
Brand Part Number Markets Notes Buy
SCHAEFFLER Fits: 6.0L V8 6010
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontEscalade Base Model or Escalade EXT
Fitment notes — SCHAEFFLER 6010
FrontEscalade Base Model or Escalade EXT1.969 In Inside Diameter X 3.15 In Outside Diameter X 0.63 In Thickwith New Process 149 Transfer Case
View on
Amazon
SKF Fits: 6.0L V8 5210ANRX
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear RearwardNew Process 149
View on
Amazon
SKF Fits: 6.0L V8 6209NRJ
🇲🇽 MX
Rear
View on
Amazon
SKF Fits: 6.0L V8 6010J
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontNew Process 149
View on
Amazon
TIMKEN Fits: 6.0L V8 209LO
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear RearwardAWD
Fitment notes — TIMKEN 209LO
Rear RearwardAWDBorg Warner 4485
View on
Amazon

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Transfer Case Output Shaft Bushing

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.0L V8 19168733
🇺🇸 US 🇨🇦 CA
AWD
View on
Amazon

This table covers the Transfer Case Output Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.

Transfer Case Output Shaft Pilot Bearing

Brand Part Number Markets Notes Buy
SCHAEFFLER Fits: 6.0L V8 HK5020
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear
View on
Amazon
SKF Fits: 6.0L V8 B5020
🇲🇽 MX
RearNeedle Bearing
View on
Amazon

This table covers the Transfer Case Output Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Transfer Case Output Shaft Repair Sleeve

Brand Part Number Markets Notes Buy
BCA Fits: 6.0L V8 NS99189
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear
View on
Amazon
NATIONAL Fits: 6.0L V8 99189
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits RearAWD
Fitment notes — NATIONAL 99189
Fits:
RearAWDEscalade Base Model or Escalade ESV
or:
RearEscalade EXTwith Borg-Warner 4481 Transfer Case1 Speed
View on
Amazon
WJB / INMOTION PARTS Fits: 6.0L V8 WS99189
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits RearAWD
Fitment notes — WJB / INMOTION PARTS WS99189
Fits:
RearAWDEscalade Base Model or Escalade ESV
or:
RearEscalade EXTwith Borg-Warner 4481 Transfer Case1 Speed
View on
Amazon

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface.

Transfer Case Output Shaft Seal

Brand Part Number Markets Notes Buy
NATIONAL Popular Fits: 6.0L V8 4503N
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearAWD
Fitment notes — NATIONAL 4503N
RearAWDwith Borg-Warner 4481 Transfer Case1 Speed
View on
Amazon
SKF Popular Fits: 6.0L V8 19317
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearNew Process 149
View on
Amazon
TIMKEN Popular Fits: 6.0L V8 710682
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontAWD
Fitment notes — TIMKEN 710682
FrontAWDEscalade Base ModelBorg Warner 4485
View on
Amazon
TIMKEN Popular Fits: 6.0L V8 4503N
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearAWD
Fitment notes — TIMKEN 4503N
RearAWDBorg Warner 4485
View on
Amazon
WJB / INMOTION PARTS Popular Fits: 6.0L V8 WS4503N
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits RearAWD
Fitment notes — WJB / INMOTION PARTS WS4503N
Fits:
RearAWDEscalade Base Model
or:
RearEscalade ESV or Escalade EXTwith Borg-Warner 4481 Transfer Case1 Speed
View on
Amazon
BCA Fits: 6.0L V8 NS710682
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontAWD
Fitment notes — BCA NS710682
FrontAWDwith Borg Warner 4481 Transfer Casewith Full Time 4WDwith 1 Speed Transfer Case
View on
Amazon
BCA Fits: 6.0L V8 NS4503N
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rearwith Borg Warner 4481 Transfer Case
Fitment notes — BCA NS4503N
Rearwith Borg Warner 4481 Transfer Casewith Full Time 4WDwith 1 Speed Transfer Case
View on
Amazon
GM GENUINE Fits: 6.0L V8 88984501
🇺🇸 US 🇨🇦 CA
FrontAWD
View on
Amazon
GM GENUINE Fits: 6.0L V8 89059495
🇺🇸 US 🇨🇦 CA
RearAWD
View on
Amazon
GM GENUINE Fits: 6.0L V8 12474947
🇺🇸 US 🇨🇦 CA
Fits FrontAWD
Fitment notes — GM GENUINE 12474947
Fits:
FrontAWD2 Speed Manual Shift Transfer Case (NP2)
or:
FrontAWDActive 2 Speed Push Button Control Transfer Case (NP8)
View on
Amazon
GM GENUINE Fits: 6.0L V8 12547638
🇺🇸 US 🇨🇦 CA
RearAWD
Fitment notes — GM GENUINE 12547638
RearAWDSTAMPED 22507BOOTEDActive 2 Speed Push Button Control Transfer Case (NP8)
View on
Amazon
NATIONAL Fits: 6.0L V8 710682
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontAWD
Fitment notes — NATIONAL 710682
FrontAWDwith Borg-Warner 4481 Transfer Case1 Speed
View on
Amazon
SCHAEFFLER Fits: 6.0L V8 SS2883
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear2.7" O.D. X 0.45" Width
View on
Amazon
SCHAEFFLER Fits: 6.0L V8 SS2911
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Escalade Base Model34.798 mm Width
Fitment notes — SCHAEFFLER SS2911
Escalade Base Model34.798 mm Width47.625 mm Shaft Diameter
View on
Amazon
SCHAEFFLER Fits: 6.0L V8 SS2884
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearEscalade Base Model or Escalade ESV
Fitment notes — SCHAEFFLER SS2884
RearEscalade Base Model or Escalade ESV11.99 mm Width46.99 mm Shaft Diameter
View on
Amazon
SCHAEFFLER Fits: 6.0L V8 SS2859
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front2.88" O.D. X 0.57" Width
View on
Amazon
SKF Fits: 6.0L V8 17348A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontBorg Warner Transfer Case
View on
Amazon
SKF Fits: 6.0L V8 18687
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearBorg Warner Transfer Case
View on
Amazon
SKF Fits: 6.0L V8 18102
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontNew Process 149
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZTSEA1300044014
🇺🇸 US
Fits RearAWD
Fitment notes — USA STANDARD GEAR ZTSEA1300044014
Fits:
RearAWDEscalade Base ModelBW 1356, BW4472, BW4473, BW4416 & BW4481 Transfer Case SEAL REAR OUTPUT
or:
RearEscalade ESV or Escalade EXTBW 1356, BW4472, BW4473, BW4416 & BW4481 Transfer Case Seal Rear Output
View on
Amazon
WJB / INMOTION PARTS Fits: 6.0L V8 WS710682
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits FrontAWD
Fitment notes — WJB / INMOTION PARTS WS710682
Fits:
FrontAWDEscalade Base Model or Escalade EXT
or:
FrontEscalade ESVwith Borg-Warner 4481 Transfer Case1 Speed
View on
Amazon

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Transfer Case Overhaul Kit

Brand Part Number Markets Notes Buy
USA STANDARD GEAR Fits: 6.0L V8 ZTBK196
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Transfer Case Bearing and Seal Overhaul Kit
Fitment notes — USA STANDARD GEAR ZTBK196
Transfer Case Bearing and Seal Overhaul Kit
AWDEscalade Base Model or Escalade EXTNP149, Aluminum Case, Chain Drive
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZTBK4484
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Transfer Case Bearing and Seal Overhaul Kit
Fitment notes — USA STANDARD GEAR ZTBK4484
Transfer Case Bearing and Seal Overhaul Kit
BW4481, aluminum case, chain drive
View on
Amazon

This table covers the Transfer Case Overhaul kits.

Transfer Case Planetary Carrier

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.0L V8 19210917
🇺🇸 US 🇨🇦 CA
Axle Shaft Spline Quantity: 38
Fitment notes — GM GENUINE 19210917
Axle Shaft Spline Quantity: 38
AWD
View on
Amazon
USA STANDARD GEAR Fits: 6.0L V8 ZTBW89059279
🇺🇸 US
Fits AWDEscalade Base Model
Fitment notes — USA STANDARD GEAR ZTBW89059279
Fits:
AWDEscalade Base ModelBW4481, BW4482 , BW4484 & BW4485 Transfer Case FRONT & REAR DIFF CARRIER
or:
Escalade ESV or Escalade EXTBW4481, BW4482 , BW4484 & BW4485 Transfer Case Front & Rear Diff Carrier
View on
Amazon

This table covers the planetary carriers in the transfer case.

Transfer Case Range Position Sensor

Brand Part Number Markets Notes Buy
DORMAN Fits: 6.0L V8 600120
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
AWD
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 6.0L V8 TCA95
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with Transfer Case Option Code (NP8)
View on
Amazon

This table covers the Transfer Case Range position sensors. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.

Transfer Case Shift Fork

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.0L V8 12473219
🇺🇸 US 🇨🇦 CA
2WD/4WDAWD
Fitment notes — GM GENUINE 12473219
2WD/4WDAWDComplete2 Speed Manual Shift Transfer Case (NP2)
View on
Amazon

This table covers the forks that move a transfer-case shift collar.

Transfer Case Shift Mode Synchronizer Blocking Ring

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.0L V8 12472963
🇺🇸 US 🇨🇦 CA
AWDOUTER
Fitment notes — GM GENUINE 12472963
AWDOUTER2 Speed Manual Shift Transfer Case (NP2)
View on
Amazon
GM GENUINE Fits: 6.0L V8 89059644
🇺🇸 US 🇨🇦 CA
AWDMIDDLE
Fitment notes — GM GENUINE 89059644
AWDMIDDLE2 Speed Manual Shift Transfer Case (NP2)
View on
Amazon

This table covers the Transfer Case Shift Mode Synchronizer Blocking rings.

Transfer Case Shift Shaft Seal

Brand Part Number Markets Notes Buy
BCA Fits: 6.0L V8 NS330385
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits AWDEscalade Base Model
Fitment notes — BCA NS330385
Fits:
AWDEscalade Base Modelwith Borg Warner 4481 Transfer Casewith Full Time 4WDwith 1 Speed Transfer Cas
or:
Escalade ESV or Escalade EXTwith Borg Warner 4485 Transfer Casewith Full Time 4WDwith 1 Speed Transfer Case
View on
Amazon
NATIONAL Fits: 6.0L V8 330385
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits AWDwith Borg-Warner 4481 Transfer Case
Fitment notes — NATIONAL 330385
Fits:
AWDwith Borg-Warner 4481 Transfer Case1 Speedor Escalade ESVwith Borg-Warner 4485 Transfer Case1 Speed
View on
Amazon
WJB / INMOTION PARTS Fits: 6.0L V8 WS330385
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Escalade ESV
Fitment notes — WJB / INMOTION PARTS WS330385
Fits:
Escalade ESV
or:
AWDEscalade Base Model or Escalade EXTwith Borg-Warner 4481 Transfer Case1 Speed
View on
Amazon

This table covers the seals at the Transfer Case Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Transfer Case Thrust Washer

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.0L V8 15547390
🇺🇸 US 🇨🇦 CA
RearAWD
Fitment notes — GM GENUINE 15547390
RearAWD2 Speed Manual Shift Transfer Case (NP2)
View on
Amazon

This table covers the Transfer Case Thrust washers.

Transfer Case Vent

Brand Part Number Markets Notes Buy
DORMAN Fits: 6.0L V8 14689
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Transmission Case Vent
Fitment notes — DORMAN 14689
Transmission Case Vent
Escalade EXT
View on
Amazon
GM GENUINE Fits: 6.0L V8 25892279
🇺🇸 US 🇨🇦 CA
AWDVent Stem with Cap
View on
Amazon
GM GENUINE Fits: 6.0L V8 89059654
🇺🇸 US 🇨🇦 CA
Fits AWDALUMINUM VENT
Fitment notes — GM GENUINE 89059654
Fits:
AWDALUMINUM VENTActive 2 Speed Push Button Control Transfer Case (NP8)
or:
AWDALUMINUM VENT2 Speed Manual Shift Transfer Case (NP2)
View on
Amazon

This table covers the vents on the transfer case.

Universal Joint

Economy

Brand Part Number Markets Notes Buy
DANA Popular Fits: 6.0L V8 253147X
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Spicer SelectGreasable
Fitment notes — DANA 253147X
Spicer SelectGreasable
Fits:
Front Driveshaft At Front AxleAWDEscalade Base Modelwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Front Driveshaft At Transfer CaseAWDEscalade Base Modelwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Rear Driveshaft At Rear AxleEscalade Base Modelwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Rear Driveshaft At TransmissionEscalade Base Modelwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Front Driveshaft At Front AxleEscalade ESV or Escalade EXTwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Front Driveshaft At Transfer CaseEscalade ESV or Escalade EXTwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Rear Driveshaft At Rear AxleEscalade ESV or Escalade EXTwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Rear Driveshaft At TransmissionEscalade ESV or Escalade EXTwith 1 Piece Rear DriveshaftInside Snap Rings
View on
Amazon
DANA Fits: 6.0L V8 15178X
🇺🇸 US 🇨🇦 CA
SVLGreasable
Fitment notes — DANA 15178X
SVLGreasable1.188 IN Bearing Cap Diameter3.625in Outside Snap Ring Dimension
Fits:
Rear Driveshaft At Rear AxleRWDwith 1 Piece Rear Driveshaft
or:
Rear Driveshaft At TransmissionRWDwith 1 Piece Rear Driveshaft
View on
Amazon
DANA Fits: 6.0L V8 153147X
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SVLGreasable
Fitment notes — DANA 153147X
SVLGreasable
Fits:
Front Driveshaft At Front AxleAWDEscalade Base Modelwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Front Driveshaft At Transfer CaseAWDEscalade Base Modelwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Rear Driveshaft At Rear AxleEscalade Base Modelwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Rear Driveshaft At TransmissionEscalade Base Modelwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Front Driveshaft At Front AxleEscalade ESV or Escalade EXTwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Front Driveshaft At Transfer CaseEscalade ESV or Escalade EXTwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Rear Driveshaft At Rear AxleEscalade ESV or Escalade EXTwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Rear Driveshaft At TransmissionEscalade ESV or Escalade EXTwith 1 Piece Rear DriveshaftInside Snap Rings
View on
Amazon
DANA Fits: 6.0L V8 25178X
🇺🇸 US 🇨🇦 CA
Spicer SelectGreasable
Fitment notes — DANA 25178X
Spicer SelectGreasable3.625in Outside Snap Ring Dimension1.188 IN Bearing Cap Diameter
Fits:
Rear Driveshaft At Rear AxleRWDwith 1 Piece Rear Driveshaft
or:
Rear Driveshaft At TransmissionRWDwith 1 Piece Rear Driveshaft
View on
Amazon
WJB / INMOTION PARTS Fits: 6.0L V8 UJT235
🇺🇸 US 🇨🇦 CA
Grade Type: Performance-Bearing Greaseable
Fitment notes — WJB / INMOTION PARTS UJT235
Grade Type: Performance-Bearing Greaseable
Fits:
Rear Shaft All Joints4WD/AWD
or:
Front Shaft All Joints4WD/AWD
or:
1.125" Bearing Cap DiameterInside Lock RingsOE Series: Mechanics 3R, Saginaw 44 and American Axle 13444WD/AWD
View on
Amazon
WJB / INMOTION PARTS Fits: 6.0L V8 UJT534G
🇺🇸 US 🇨🇦 CA
Grade Type: STD-Greaseable
Fitment notes — WJB / INMOTION PARTS UJT534G
Grade Type: STD-Greaseable
Fits:
Rear Shaft All Joints4WD/AWD
or:
Front Shaft All Joints4WD/AWD
or:
1.125" Bearing Cap DiameterInside Lock RingsOE Series: Mechanics 3R, Saginaw 44 and American Axle 13444WD/AWD
View on
Amazon
WJB / INMOTION PARTS Fits: 6.0L V8 UJT234
🇺🇸 US 🇨🇦 CA
Grade Type: Performance-Non-Greaseable
Fitment notes — WJB / INMOTION PARTS UJT234
Grade Type: Performance-Non-Greaseable
Fits:
Rear Shaft All Joints4WD/AWD
or:
Front Shaft All Joints4WD/AWD
or:
Inside Lock RingsOE Series: Mechanics 3R, Saginaw 44 and American Axle 13444WD/AWD
View on
Amazon

Heavy Duty

Brand Part Number Markets Notes Buy
MOOG Popular Fits: 6.0L V8 234
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Super StrengthNon-Greasable
Fitment notes — MOOG 234
Super StrengthNon-Greasable
Fits:
Front Driveshaft At Front AxleAWDInside Lock Rings
or:
Front Driveshaft At Transfer CaseAWDInside Lock Rings
or:
Rear Driveshaft At TransmissionAWDInside Lock Rings
or:
Rear Driveshaft At Rear AxleAWDInside Lock Rings
View on
Amazon
MOOG Popular Fits: 6.0L V8 232A
🇺🇸 US 🇨🇦 CA
Super StrengthGreasable
Fitment notes — MOOG 232A
Super StrengthGreasable
Fits:
Rear Driveshaft At Rear AxleRWDwith 0.056" Snap Ring Dimension
or:
Rear Driveshaft At TransmissionRWDwith 0.056" Snap Ring Dimension
View on
Amazon
DANA Fits: 6.0L V8 51350X
🇺🇸 US 🇨🇦 CA
Spicer Life Series (SPL)Non-Greasable
Fitment notes — DANA 51350X
Spicer Life Series (SPL)Non-Greasable1.188" Bearing CapOutside Snap Rings
Fits:
Rear Driveshaft At Rear AxleRWDOE Designwith 1 Piece Rear Driveshaft
or:
Rear Driveshaft At TransmissionRWDOE Designwith 1 Piece Rear Driveshaft
View on
Amazon
DANA Fits: 6.0L V8 5795X
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Spicer Life Series (SPL)Non-Greasable
Fitment notes — DANA 5795X
Spicer Life Series (SPL)Non-Greasable
Fits:
Front Driveshaft At Front AxleAWDEscalade Base Modelwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Front Driveshaft At Transfer CaseAWDEscalade Base Modelwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Rear Driveshaft At Rear AxleEscalade Base Modelwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Rear Driveshaft At TransmissionEscalade Base Modelwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Front Driveshaft At Front AxleEscalade ESV or Escalade EXTwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Front Driveshaft At Transfer CaseEscalade ESV or Escalade EXTwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Rear Driveshaft At Rear AxleEscalade ESV or Escalade EXTwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Rear Driveshaft At TransmissionEscalade ESV or Escalade EXTwith 1 Piece Rear DriveshaftInside Snap Rings
View on
Amazon
DANA Fits: 6.0L V8 51350XP
🇺🇸 US 🇨🇦 CA
Spicer Life Series (SPL) PlusNon-Greasable
Fitment notes — DANA 51350XP
Spicer Life Series (SPL) PlusNon-GreasableHigh Temperature Design1.188" Bearing CapOutside Snap Rings
Fits:
Rear Driveshaft At Rear AxleRWDEnhanced over OE Designwith 1 Piece Rear Driveshaft
or:
Rear Driveshaft At TransmissionRWDEnhanced over OE Designwith 1 Piece Rear Driveshaft
View on
Amazon
DANA Fits: 6.0L V8 513501X
🇺🇸 US 🇨🇦 CA
Spicer Life Series (SPL)Greasable
Fitment notes — DANA 513501X
Spicer Life Series (SPL)Greasable1.188" Bearing CapOutside Snap Rings
Fits:
Rear Driveshaft At Rear AxleRWDwith 1 Piece Rear Driveshaft
or:
Rear Driveshaft At TransmissionRWDwith 1 Piece Rear Driveshaft
View on
Amazon
DANA Fits: 6.0L V8 SPL301350XC
🇺🇸 US 🇨🇦 CA
Spicer Life Series (SPL)Non-Greasable
Fitment notes — DANA SPL301350XC
Spicer Life Series (SPL)Non-GreasableBlue Coated Performance1.188" Bearing CapOutside Snap Rings
Fits:
Rear Driveshaft At Rear AxleRWDwith 1 Piece Rear Driveshaft
or:
Rear Driveshaft At TransmissionRWDwith 1 Piece Rear Driveshaft
View on
Amazon
FVP Fits: 6.0L V8 2153105
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
PerformanceGreasable
Fitment notes — FVP 2153105
PerformanceGreasableGrease Fitting in Cross
Fits:
Rear Shaft All JointsInside Lock Rings
or:
Front Shaft All JointsAWDInside Lock Rings
View on
Amazon
GMB Fits: 6.0L V8 2153105
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
PerformanceGreasable
Fitment notes — GMB 2153105
PerformanceGreasableGrease Fitting in Cross
Fits:
Front Shaft All JointsAWD1.125" Bearing Cap DiameterInside Lock Rings
or:
Rear Shaft All JointsRWD1.125" Bearing Cap DiameterInside Lock Rings
or:
Rear Shaft All JointsAWD1.125" Bearing Cap DiameterInside Lock Rings
View on
Amazon
MOOG Fits: 6.0L V8 235
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Super StrengthGreasable
Fitment notes — MOOG 235
Super StrengthGreasable
Fits:
Front Driveshaft At Front AxleAWDInside Lock Rings
or:
Front Driveshaft At Transfer CaseAWDInside Lock Rings
or:
Rear Driveshaft At TransmissionAWDInside Lock Rings
or:
Rear Driveshaft At Rear AxleAWDInside Lock Rings
View on
Amazon
SKF Fits: 6.0L V8 UJ234
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Brute Force Non Greaseable
Fitment notes — SKF UJ234
Brute Force Non Greaseable
Fits:
Rear Driveshaft at TransmissionAWD
or:
Front Driveshaft at Front AxleAWD
or:
Rear Driveshaft at Rear AxleAWD
or:
Front Driveshaft at Transfer CaseAWD
View on
Amazon
SKF Fits: 6.0L V8 UJ235
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Brute Force Greaseable
Fitment notes — SKF UJ235
Brute Force Greaseable
Fits:
Rear Driveshaft at TransmissionAWD
or:
Front Driveshaft at Front AxleAWD
or:
Rear Driveshaft at Rear AxleAWD
or:
Front Driveshaft at Transfer CaseAWD
View on
Amazon
SKF Fits: 6.0L V8 UJ232A
🇺🇸 US 🇨🇦 CA
Brute Force Greaseable
Fitment notes — SKF UJ232A
Brute Force Greaseable
Fits:
Rear Driveshaft at TransmissionRWD
or:
Rear Driveshaft at Rear AxleRWD
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
GMB Popular Fits: 6.0L V8 2103105
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
GreasableGrease Fitting in Cross
Fitment notes — GMB 2103105
GreasableGrease Fitting in Cross
Fits:
Front Shaft All JointsAWD1.125" Bearing Cap DiameterIncludes 4 Inside Lock Rings
or:
Rear Shaft All JointsRWD1.125" Bearing Cap DiameterIncludes 4 Inside Lock Rings
or:
Rear Shaft All JointsAWD1.125" Bearing Cap DiameterIncludes 4 Inside Lock Rings
View on
Amazon
MOOG Popular Fits: 6.0L V8 534G
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Greasable
Fitment notes — MOOG 534G
Greasable
Fits:
Front Driveshaft At Front AxleAWDInside Lock Rings
or:
Front Driveshaft At Transfer CaseAWDInside Lock Rings
or:
Rear Driveshaft At TransmissionAWDInside Lock Rings
or:
Rear Driveshaft At Rear AxleAWDInside Lock Rings
View on
Amazon
SKF Popular Fits: 6.0L V8 UJ534G
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Greaseable
Fitment notes — SKF UJ534G
Greaseable
Fits:
Rear Driveshaft at TransmissionAWD
or:
Front Driveshaft at Front AxleAWD
or:
Rear Driveshaft at Rear AxleAWD
or:
Front Driveshaft at Transfer CaseAWD
View on
Amazon
AAM Fits: 6.0L V8 40103777
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Front Shaftwith 1344 U-Joints
Fitment notes — AAM 40103777
Fits:
Front Shaftwith 1344 U-Jointswith Inside Snap Rings
or:
Rear Shaftwith 1344 U-Jointswith Inside Snap Rings
View on
Amazon
ACDELCO Fits: 6.0L V8 45U0108
🇺🇸 US 🇨🇦 CA
Gold
Fitment notes — ACDELCO 45U0108
Gold
Fits:
Front Shaftwith 1.125 In. Bearing Cup Diameter, with 2.556 In. Inside Lock-upGreasable (Location In cross)
or:
Rear Shaftwith 1.125 In. Bearing Cup Diameter, with 2.556 In. Inside Lock-upGreasable (Location In cross)
View on
Amazon
DANA Fits: 6.0L V8 53147X
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SpicerGreasable
Fitment notes — DANA 53147X
SpicerGreasable
Fits:
Front Driveshaft At Front AxleAWDEscalade Base Modelwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Front Driveshaft At Transfer CaseAWDEscalade Base Modelwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Rear Driveshaft At Rear AxleEscalade Base Modelwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Rear Driveshaft At TransmissionEscalade Base Modelwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Front Driveshaft At Front AxleEscalade ESV or Escalade EXTwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Front Driveshaft At Transfer CaseEscalade ESV or Escalade EXTwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Rear Driveshaft At Rear AxleEscalade ESV or Escalade EXTwith 1 Piece Rear DriveshaftInside Snap Rings
or:
Rear Driveshaft At TransmissionEscalade ESV or Escalade EXTwith 1 Piece Rear DriveshaftInside Snap Rings
View on
Amazon
DANA Fits: 6.0L V8 5178X
🇺🇸 US 🇨🇦 CA
SpicerGreasable
Fitment notes — DANA 5178X
SpicerGreasable3.625in Outside Snap Ring Dimension1.188 IN Bearing Cap Diameter
Fits:
Rear Driveshaft At Rear AxleRWDwith 1 Piece Rear Driveshaft
or:
Rear Driveshaft At TransmissionRWDwith 1 Piece Rear Driveshaft
View on
Amazon
GM GENUINE Fits: 6.0L V8 23104840
🇺🇸 US 🇨🇦 CA
Fits FrontEscalade ESV
Fitment notes — GM GENUINE 23104840
Fits:
FrontEscalade ESVwith Internal Snap Rings
or:
RearEscalade ESVwith Internal Snap Rings
or:
FrontAWDEscalade Base Modelwith Internal Snap Rings
or:
RearAWDEscalade Base Modelwith Internal Snap Rings
or:
FrontRWDTrans.Code 4L60-E4 Speed Automatic Trans.with Internal Snap Rings
or:
RearRWDTrans.Code 4L60-E4 Speed Automatic Trans.with Internal Snap Rings
or:
Front Shaft All JointsAWDEscalade Base Modelwith Internal Snap Rings
or:
Front Shaft All JointsEscalade ESV or Escalade EXTwith Internal Snap Rings
or:
FrontRWDwith Internal Snap RingsPolice Pursuit Vehicle (PPV)
or:
RearRWDwith Internal Snap RingsPolice Pursuit Vehicle (PPV)
View on
Amazon
GM GENUINE Fits: 6.0L V8 89059111
🇺🇸 US 🇨🇦 CA
Fits FrontRWD
Fitment notes — GM GENUINE 89059111
Fits:
FrontRWDTrans.Code 4L65-E4 speed Automatic trans.with External Snap Ring Tab On Groove On Differential Pinion/Gear Yokefor 1350 Series3.625 X 1.187
or:
RearRWDTrans.Code 4L65-E4 speed Automatic trans.with External Snap Ring Tab On Groove On Differential Pinion/Gear Yokefor 1350 Series3.625 X 1.187
View on
Amazon
MOOG Fits: 6.0L V8 331A
🇺🇸 US 🇨🇦 CA
Fits Rear Driveshaft At Rear AxleRWD
Fitment notes — MOOG 331A
Fits:
Rear Driveshaft At Rear AxleRWDwith 0.056" Snap Ring Dimension
or:
Rear Driveshaft At TransmissionRWDwith 0.056" Snap Ring Dimension
View on
Amazon
SKF Fits: 6.0L V8 UJ331A
🇺🇸 US 🇨🇦 CA
Greaseable
Fitment notes — SKF UJ331A
Greaseable
Fits:
Rear Driveshaft at TransmissionRWD
or:
Rear Driveshaft at Rear AxleRWD
View on
Amazon

This table covers the U-joints in the driveshaft.

Universal Joint Strap Kit

Brand Part Number Markets Notes Buy
MOOG Popular Fits: 6.0L V8 53010
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits FrontAWD
Fitment notes — MOOG 53010
Fits:
FrontAWD
or:
RearAWDEscalade Base Modelor At Rear AxleAWDEscalade Base Modelor Intermediate Shaft At TransmissionAWDEscalade Base Model
View on
Amazon
SKF Popular Fits: 6.0L V8 UJ53010
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Front Driveshaft At Front AxleAWD
Fitment notes — SKF UJ53010
Fits:
Front Driveshaft At Front AxleAWD0.328 Outside Diameter Bolt Hole1.500 Bolt1.812 Bolt Center to Bolt Center
or:
Front Driveshaft At Transfer CaseAWD0.328 Outside Diameter Bolt Hole1.500 Bolt1.812 Bolt Center to Bolt Center
or:
Rear Driveshaft At TransmissionAWD0.328 Outside Diameter Bolt Hole1.500 Bolt1.812 Bolt Center to Bolt Center
or:
Rear Driveshaft At Rear AxleAWD0.328 Outside Diameter Bolt Hole1.500 Bolt1.812 Bolt Center to Bolt Center
View on
Amazon
ACDELCO Fits: 6.0L V8 45U0505
🇺🇸 US 🇨🇦 CA
Gold
Fitment notes — ACDELCO 45U0505
Gold
Fits:
FrontAWD
or:
At Rear AxleAWDEscalade Base Modelor Intermediate Shaft At TransmissionAWDEscalade Base Model
View on
Amazon
DORMAN Fits: 6.0L V8 81001
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Front Shaft All Joints1.125" Diameter Bearing Cap
Fitment notes — DORMAN 81001
Fits:
Front Shaft All Joints1.125" Diameter Bearing CapBolt Holes Center to Center: 1.813"or Rear Shaft All Joints1.125" Diameter Bearing CapBolt Holes Center to Center: 1.813"
View on
Amazon
DORMAN Fits: 6.0L V8 13862
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear Driveshaft At Rear Axlewith 30 mm U-Joint Bearing Cap
View on
Amazon
GMB Fits: 6.0L V8 2604105
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Front Driveshaft at Front AxleAWD
Fitment notes — GMB 2604105
Fits:
Front Driveshaft at Front AxleAWD
or:
Rear Driveshaft at Rear AxleAWDEscalade Base Model
or:
Rear Driveshaft at Rear AxleRWD
View on
Amazon
MOOG Fits: 6.0L V8 49210
🇺🇸 US 🇨🇦 CA
RearRWD
View on
Amazon
SKF Fits: 6.0L V8 UJ49210
🇺🇸 US 🇨🇦 CA
Fits FrontRWD
Fitment notes — SKF UJ49210
Fits:
FrontRWD0.344 Outside Diameter Bolt Hole1.500 Bolt1.656 Bolt Center to Bolt Center
or:
RearRWD0.344 Outside Diameter Bolt Hole1.500 Bolt1.656 Bolt Center to Bolt Center
View on
Amazon
WJB / INMOTION PARTS Fits: 6.0L V8 UJT53010
🇺🇸 US 🇨🇦 CA
Front Shaft All JointsRear Shaft All Joints
Fitment notes — WJB / INMOTION PARTS UJT53010
Front Shaft All JointsRear Shaft All JointsOE Series: Mechanics 3R Half-Round4WD/AWD
View on
Amazon

This table covers the Universal Joint Strap kits.

Universal Joint U-Bolt Kit

Brand Part Number Markets Notes Buy
MOTIVE GEAR Fits: 6.0L V8 MGUB3R
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Competition Yoke U-BoltIncl. Longer Chromoly U-Bolts/Grade 8 Bolts
Fitment notes — MOTIVE GEAR MGUB3R
Competition Yoke U-BoltIncl. Longer Chromoly U-Bolts/Grade 8 Bolts3R/S44 SeriesChromoly
U-Bolt Kit
View on
Amazon

This table covers the Universal Joint U-Bolt kits.

Buying Drivetrain Parts for a 2005 Cadillac Escalade

On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.

  • Match the engine first. Some drivetrain parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Differential Rebuild Kit and Differential Pinion Bearing / Race .

Frequently Asked Questions

How many drivetrain parts fit the 2005 Cadillac Escalade?

Our catalog currently lists 746 drivetrain parts for the 2005 Cadillac Escalade across 105 subcategories and 47 brands, covering both the 5.3L V8 and the 6.0L V8. Each part is matched to the engine(s) it fits.

Do drivetrain parts differ between 2005 Cadillac Escalade engines?

Some do. 376 parts fit every engine; the other 370 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of drivetrain problems on a 2005 Cadillac Escalade?

Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2005 Cadillac Escalade was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2005 Cadillac Escalade?

First match the engine — each row shows which engine(s) the part fits. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2005 Cadillac Escalade

Drivetrain Parts for Other Cadillac Escalade Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.