The 2008 Cadillac STS has 259 engine parts with verified fitment on this page — 59 part types and 53 brands, covering all 3 engine options (3.6L V6, 4.4L V8 Supercharged and 4.6L V8). Each part includes a manufacturer part number and application notes.
The engine on the 2008 Cadillac STS covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil (26 parts), Oil Filter (19 parts) and Timing Chain Guide / Damper (16 parts). The other 56 part types cover the remaining 198 parts.
The 2008 Cadillac STS was sold with 3 engines. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2008 Cadillac STS engine parts are GM GENUINE (28 parts), FEL-PRO (15 parts) and ENGINETECH (15 parts), plus 50 more brands. Quality grades include Standard Replacement, Economy and High Performance / Heavy Duty.
40 parts on this 2008 Cadillac STS page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including FEL-PRO TCS46011 (Camshaft Seal) and ENGINETECH GM281CSE (Conversion / Lower Gasket Set). Click any part number to see every vehicle that part fits.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 4.6L V8 | TCS46011 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| APEX Fits: 4.6L V8 | ATC3680 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | 67683 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Seal with Retainer Plate | View on Amazon |
| ULTRA-POWER Fits: 4.6L V8 | TCS46011 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 811052900 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
5 Camshaft Seal parts are listed for the 2008 Cadillac STS, from FEL-PRO, APEX, MAHLE / CLEVITE and 2 other brands. FEL-PRO TCS46011 carries the "Popular" badge.
This group includes FEL-PRO TCS46011, APEX ATC3680 and MAHLE / CLEVITE 67683 and the remaining parts above.
Connecting Rod Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 4.6L V8 | BB310J | 🇺🇸 US | Set | View on Amazon |
| KING ENGINE BEARINGS Fits: 4.6L V8 | CR8003SI | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | BI-Metal (aluminum silicon base)Set | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | CB1648P | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | P Series (Tri-Metal)Pair | View on Amazon |
| SEALED POWER Fits: 4.6L V8 | 84825A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetA-Series aluminum bearings | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
4 Connecting Rod Bearing parts for the 2008 Cadillac STS come from 4 brands — ENGINETECH, KING ENGINE BEARINGS, MAHLE / CLEVITE and 1 other brand.
This group includes ENGINETECH BB310J, KING ENGINE BEARINGS CR8003SI and MAHLE / CLEVITE CB1648P and the remaining parts above.
Connecting Rod Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 12552947 | 🇺🇸 US 🇨🇦 CA | MJ9X1.0-4H6HX61.9 LONG | View on Amazon |
This table covers the Connecting Rod bolts.
One part is listed for the 2008 Cadillac STS — GM GENUINE 12552947.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 4.6L V8 | GM281CSE | 🇺🇸 US | Engine VIN code A | View on Amazon |
| AJUSA Fits: 4.6L V8 | 54324700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| APEX Fits: 4.6L V8 | ACS11045 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 4.6L V8 | CS54765 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VICTOR REINZ Fits: 4.6L V8 | 081160801 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
5 Conversion / Lower Gasket Set parts for the 2008 Cadillac STS come from 5 brands — ENGINETECH, AJUSA, APEX and 2 other brands. The "Popular" part is ENGINETECH GM281CSE.
Part numbers include ENGINETECH GM281CSE, AJUSA 54324700 and APEX ACS11045, among others listed above.
Crankshaft Main Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 4.6L V8 | BC414J | 🇺🇸 US | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | MS2206P | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | P Series (Tri-Metal)Set | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | MS2206A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | A Series (Aluminum)Set | View on Amazon |
| SEALED POWER Fits: 4.6L V8 | 7319MA | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetA-Series aluminum bearings | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
4 Crankshaft Main Bearing parts are listed for the 2008 Cadillac STS, from MAHLE / CLEVITE, ENGINETECH and SEALED POWER.
Listed part numbers: ENGINETECH BC414J, MAHLE / CLEVITE MS2206P and MAHLE / CLEVITE MS2206A, plus the other parts above.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 4.6L V8 | BS40670 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PTFE RubberIncludes Sleeve | View on Amazon |
| NATIONAL Popular Fits: 4.6L V8 | 710604 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| APEX Fits: 4.6L V8 | ABS368A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| APEX Fits: 4.6L V8 | ATC3692 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| FEL-PRO Fits: 4.6L V8 | TCS460761 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 12568025 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | JV1667 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Contains 12mm Wide Rear Main SealPTFE (Polytetrafluoroethylene) | View on Amazon |
| SKF Fits: 4.6L V8 | 37507 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 191008401 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PTFESet | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.6L V8 | WS710604 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
10 Crankshaft Seal parts are listed for the 2008 Cadillac STS, from FEL-PRO, APEX, NATIONAL and 5 other brands. FEL-PRO BS40670 carries the "Popular" badge.
Cylinder Head Alignment Dowel Pin
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 03522352 | 🇺🇸 US 🇨🇦 CA | HOLLOW DOWEL,15.675X28,CHAM BOTH ENDS,SAE 12L14,ZP | View on Amazon |
This table covers the Cylinder Head Alignment Dowel pins.
This group shows a single part: GM GENUINE 03522352.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 4.6L V8 | ES72217 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| APEX Fits: 4.6L V8 | AHB370 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| ENGINETECH Fits: 4.6L V8 | HB279 | 🇺🇸 US | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | GS33597 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Cylinder Head Bolt KitSet | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 141012401 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
5 Cylinder Head Bolt parts for the 2008 Cadillac STS come from 5 brands — FEL-PRO, APEX, ENGINETECH and 2 other brands. The "Popular" part is FEL-PRO ES72217.
Part numbers include FEL-PRO ES72217, APEX AHB370 and ENGINETECH HB279, among others listed above.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 4.6L V8 | 26381PT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| FEL-PRO Popular Fits: 4.6L V8 | 26380PT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| APEX Fits: 4.6L V8 | AHG1145L | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| APEX Fits: 4.6L V8 | AHG1145R | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| ULTRA-POWER Fits: 4.6L V8 | 26380PT | 🇺🇸 US 🇨🇦 CA | Head Bolt Replacement RecommendedHead Bolts Not Included | View on Amazon |
| ULTRA-POWER Fits: 4.6L V8 | 26381PT | 🇺🇸 US 🇨🇦 CA | Head Bolt Replacement RecommendedHead Bolts Not Included | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
6 Cylinder Head Gasket parts for the 2008 Cadillac STS come from 3 brands — FEL-PRO, APEX and ULTRA-POWER. The "Popular" part is FEL-PRO 26381PT.
Listed part numbers: FEL-PRO 26381PT, FEL-PRO 26380PT and APEX AHG1145L, plus the other parts above.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 4.6L V8 | GM281HSG | 🇺🇸 US | Timing Cover Gaskets Not Included | View on Amazon |
| APEX Fits: 4.6L V8 | AHS11045 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ENGINETECH Fits: 4.6L V8 | GM281HSGWB | 🇺🇸 US | Includes Head BoltsTiming Cover Gaskets Not Included | View on Amazon |
| FEL-PRO Fits: 4.6L V8 | HS26380PT1 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals | View on Amazon |
| FEL-PRO Fits: 4.6L V8 | HS26380PT1VK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Head Bolts, Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
5 Cylinder Head Gasket Set parts for the 2008 Cadillac STS come from 3 brands — ENGINETECH, FEL-PRO and APEX. The "Popular" part is ENGINETECH GM281HSG.
This group includes ENGINETECH GM281HSG, APEX AHS11045 and ENGINETECH GM281HSGWB and the remaining parts above.
Cylinder Head Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 11562126 | 🇺🇸 US 🇨🇦 CA | Cup, 32.03X7.88X1.27, S30400 Stainless Steel Per SAE J405 | View on Amazon |
This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
One part is listed for the 2008 Cadillac STS — GM GENUINE 11562126.
Engine Block Heater
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 12587380 | 🇺🇸 US 🇨🇦 CA | Use with 2 Pin HeaterEngine Block Heater (K05) | View on Amazon |
| KAT'S HEATERS Fits: 4.6L V8 | 11484 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Freeze Plug Heater | View on Amazon |
This table covers the block heaters that warm the coolant or oil in cold weather.
2 Engine Block Heater parts are listed for the 2008 Cadillac STS, from GM GENUINE and KAT'S HEATERS.
Part numbers include GM GENUINE 12587380 and KAT'S HEATERS 11484.
Engine Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TECHPRO Fits: 4.6L V8 | GM1228126 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
This table covers the Engine covers.
This group shows a single part: TECHPRO GM1228126.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 4.6L V8 | 50555500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
This group shows a single part: AJUSA 50555500.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| QUALCAST Fits: 4.6L V8 | 102054 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.103 Head Diameter. | View on Amazon |
| QUALCAST Fits: 4.6L V8 | 1013243 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.142 Head Diameter. | View on Amazon |
| SBI Fits: 4.6L V8 | 13243 | 🇺🇸 US 🇨🇦 CA | Superalloy | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
3 Exhaust Valve parts are listed for the 2008 Cadillac STS, from QUALCAST and SBI.
This group includes QUALCAST 102054, QUALCAST 1013243 and SBI 13243.
Harmonic Balancer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 4.6L V8 | 594709 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ULTRA-POWER Fits: 4.6L V8 | 594709 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.
2 Harmonic Balancer parts for the 2008 Cadillac STS come from 2 brands — DORMAN and ULTRA-POWER.
Part numbers include DORMAN 594709, among others listed above.
Harmonic Balancer Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 4.6L V8 | 595005 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | M14 X 1.50 X 48.4 mm | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 11549124 | 🇺🇸 US 🇨🇦 CA | M14X1.5X48.4 | View on Amazon |
This table covers the Harmonic Balancer bolts.
2 Harmonic Balancer Bolt parts are listed for the 2008 Cadillac STS, from DORMAN and GM GENUINE.
This group includes DORMAN 595005 and GM GENUINE 11549124.
Intake Insulator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 12559120 | 🇺🇸 US 🇨🇦 CA | Cover Insulator | View on Amazon |
This table covers the Intake insulators.
This group shows a single part: GM GENUINE 12559120.
Intake Manifold
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 19330172 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone.
One part is listed for the 2008 Cadillac STS — GM GENUINE 19330172.
Intake Manifold Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 11588352 | 🇺🇸 US 🇨🇦 CA | M6X1X48 | View on Amazon |
This table covers the Intake Manifold bolts.
This group shows a single part: GM GENUINE 11588352.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 4.6L V8 | MS96716 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| APEX Fits: 4.6L V8 | AMS3692 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 12588809 | 🇺🇸 US 🇨🇦 CA | Seal | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | MS19706 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMolded Rubber | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 111034001 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Intake Manifold Gasket parts for the 2008 Cadillac STS come from 5 brands — FEL-PRO, APEX, GM GENUINE and 2 other brands. The "Popular" part is FEL-PRO MS96716.
Listed part numbers: FEL-PRO MS96716, APEX AMS3692 and GM GENUINE 12588809, plus the other parts above.
Intake Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 4.6L V8 | V4362 | 🇺🇸 US | .2335 stem1.426 Head | View on Amazon |
| QUALCAST Fits: 4.6L V8 | 102053 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.426 Head Diameter. | View on Amazon |
| SBI Fits: 4.6L V8 | 02053 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SEALED POWER Fits: 4.6L V8 | V4643 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Chrome Plated StemSize | View on Amazon |
This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
4 Intake Valve parts are listed for the 2008 Cadillac STS, from ENGINETECH, QUALCAST, SBI and 1 other brand.
Listed part numbers: ENGINETECH V4362, QUALCAST 102053 and SBI 02053, plus the other parts above.
Motor Mount
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 4.6L V8 | SKM3149 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Front LeftBase Model | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Popular Fits: 4.6L V8 | 3149 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Front LeftReuse OE Heat Shield | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 4.6L V8 | A5722 | 🇺🇸 US 🇨🇦 CA | Front RightAWD | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 4.6L V8 | A5939 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front LeftRWD | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 4.6L V8 | A5940 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front RightRWD | View on Amazon |
| PIONEER Fits: 4.6L V8 | 615455 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| PIONEER Fits: 4.6L V8 | 615722 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right | View on Amazon |
| WESTAR Fits: 4.6L V8 | EM3149 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
8 Motor Mount parts are listed for the 2008 Cadillac STS, from DEA / MARMON RIDE CONTROL, PIONEER, SKP and 2 other brands. SKP SKM3149 carries the "Popular" badge.
In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SKM3149.
The Standard Replacement section lists 7 options from DEA / MARMON RIDE CONTROL, PIONEER, ANCHOR and 1 other brand — built to original-equipment specification. ANCHOR 3149 is listed in this group.
Part numbers include SKP SKM3149, ANCHOR 3149 and DEA / MARMON RIDE CONTROL A5722, among others listed above.
Oil
Summary: Notes list SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include VALVOLINE, MOBIL and LIQUI MOLY.
Full Synthetic
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LIQUI MOLY Popular Fits: 4.6L V8 | 20228 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molygen New Generation 5W-305 Liter | View on Amazon |
| MOBIL Popular Fits: 4.6L V8 | 125195 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic 5W-30Mobil Full Synthetic | View on Amazon |
| MOBIL Popular Fits: 4.6L V8 | 124315 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 5W-30Mobil 1 Advanced | View on Amazon |
| VALVOLINE Popular Fits: 4.6L V8 | VV955 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Protection Full Synthetic SAE 5W-301 Quart | View on Amazon |
| IDEMITSU Fits: 4.6L V8 | 30015204750 | 🇺🇸 US | IFG3 5W-30 SP/Motor Oil1 Quart | View on Amazon |
| IDEMITSU Fits: 4.6L V8 | 30013015750 | 🇺🇸 US | Full Synthetic 5W-30 GF-6/SP1 Quart | View on Amazon |
| IDEMITSU Fits: 4.6L V8 | 30013015953 | 🇺🇸 US | Full Synthetic 5W-30 GF-6/SP5 Quart | View on Amazon |
| LIQUI MOLY Fits: 4.6L V8 | 20136 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec AA 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: 4.6L V8 | 20226 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molygen New Generation 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: 4.6L V8 | 20138 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec AA 5W-305 Liter | View on Amazon |
| LUCAS OIL Fits: 4.6L V8 | 10049 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FULL SYNTHETIC MOTOR OIL SAE 5W-301 qt | View on Amazon |
| LUCAS OIL Fits: 4.6L V8 | 18005 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic Motor Oil SAE 5W-306 Gallon | View on Amazon |
| MOBIL Fits: 4.6L V8 | 112627 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance 5W-30Mobil 1 Extended Performance | View on Amazon |
| PENTOSIN Fits: 4.6L V8 | 8044214 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 5W-30-Pentospeed-DEXOS1 GEN31 Liter | View on Amazon |
| PENTOSIN Fits: 4.6L V8 | 8044216 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 5W-30-Pentospeed-DEXOS1 GEN35 Liters | View on Amazon |
| VALVOLINE Fits: 4.6L V8 | 891678 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Protection Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 4.6L V8 | 891670 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 4.6L V8 | 881164 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart | View on Amazon |
High Mileage (>75,000 Miles)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Popular Fits: 4.6L V8 | VV1556 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Max Life High Mileage Synthetic Blend SAE 5W-301 Quart | View on Amazon |
| MOBIL Fits: 4.6L V8 | 123842 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance High Mileage 5W-30Synthetic | View on Amazon |
| MOBIL Fits: 4.6L V8 | 103767 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | High Mileage 5W-30Mobil 1 High Mileage | View on Amazon |
| VALVOLINE Fits: 4.6L V8 | VV179 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage with Max Life Technology SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 4.6L V8 | 881163 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Max Life High Mileage Synthetic Blend SAE 5W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 4.6L V8 | 881169 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic High Mileage with Max Life Technology SAE 5W-30Easy Pour 5 Quart | View on Amazon |
Synthetic Blend
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Popular Fits: 4.6L V8 | 797975 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Daily Protection SAE 5W-30 Synthetic Blend1 Quart | View on Amazon |
| VALVOLINE Fits: 4.6L V8 | 881159 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Daily Protection SAE 5W-30 Synthetic BlendEasy Pour 5 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
26 Oil parts are listed for the 2008 Cadillac STS, from VALVOLINE, MOBIL, LIQUI MOLY and 3 other brands. LIQUI MOLY 20228 carries the "Popular" badge. They are grouped as Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend, with Full Synthetic the largest group at 18 parts from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.
Oil Cooler Bypass Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 25013759 | 🇺🇸 US 🇨🇦 CA | OPENING PRESSURE 9-11 PSI NOMINALEngine Oil Cooling System (KC4) | View on Amazon |
This table covers the Oil Cooler Bypass valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
One part is listed for the 2008 Cadillac STS — GM GENUINE 25013759.
Oil Cooler Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 4.6L V8 | 66219 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Seals Two Pipes | View on Amazon |
This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: DORMAN 66219.
Oil Cooler Mounting Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HAYDEN Fits: 4.6L V8 | 238 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber Block Mounting Kit for Heavy Duty Oil Cooler | View on Amazon |
| HAYDEN Fits: 4.6L V8 | 153 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Metal Mounting Bracket Kit for Heavy Duty Oil Cooler | View on Amazon |
This table covers the Oil Cooler Mounting kits.
2 Oil Cooler Mounting Kit parts for the 2008 Cadillac STS come from HAYDEN.
This group includes HAYDEN 238 and HAYDEN 153.
Oil Dipstick / Tube Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 4.6L V8 | 584210 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Inner Diameter [MM]: 6,07 | View on Amazon |
| FEL-PRO Fits: 4.6L V8 | 73889 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| GM GENUINE Fits: 4.6L V8 | 24504031 | 🇺🇸 US 🇨🇦 CA | Single Use6.07 ID | View on Amazon |
This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Oil Dipstick / Tube Seal parts for the 2008 Cadillac STS come from 3 brands — ELRING, FEL-PRO and GM GENUINE.
Listed part numbers: ELRING 584210, FEL-PRO 73889 and GM GENUINE 24504031.
Oil Drain Plug
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 4.6L V8 | 090175 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Integrated GasketM12 x 1.75 Thread | View on Amazon |
Twist Drain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 4.6L V8 | 092018 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Thread Size: M12-1.75Twist Style | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 4.6L V8 | 090034 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | M12 x 1.75 Thread | View on Amazon |
| ELRING Fits: 4.6L V8 | 823400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Seal RingBolt Head-/Nut Design: Male Hex | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 11562588 | 🇺🇸 US 🇨🇦 CA | with SealExc. Magnet | View on Amazon |
| VAICO Fits: 4.6L V8 | V400755 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Thread Size: M 12 X 1,75Includes Gasket | View on Amazon |
This table covers the drain plugs in the oil pan.
6 Oil Drain Plug parts are listed for the 2008 Cadillac STS, from DORMAN, ELRING, GM GENUINE and 1 other brand. DORMAN 090175 carries the "Popular" badge.
Economy: 1 part, from DORMAN. A representative part number is DORMAN 090175.
The Twist Drain section lists 1 option from DORMAN — grouped under the catalog's "Twist Drain" designation — the notes column spells out what sets them apart. DORMAN 092018 is listed in this group.
4 ungrouped parts are not assigned to a grade, with the same engine-level match.
Part numbers include DORMAN 090175, DORMAN 092018 and DORMAN 090034, among others listed above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 4.6L V8 | 097119 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber Gasket | View on Amazon |
| DORMAN Fits: 4.6L V8 | 97119 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rubber GasketRubber | View on Amazon |
| ELRING Fits: 4.6L V8 | 056130 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: FPM (fluoride rubber)Outer Diameter [MM]: 20,8 | View on Amazon |
| ULTRA-POWER Fits: 4.6L V8 | 097119 | 🇺🇸 US 🇨🇦 CA | ID: 0.448"RUBBER GASKET | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Oil Drain Plug Gasket parts for the 2008 Cadillac STS come from 3 brands — DORMAN, ELRING and ULTRA-POWER.
Part numbers include DORMAN 097119, DORMAN 97119 and ELRING 056130, among others listed above.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 4.6L V8 | FC215 | 🇺🇸 US 🇨🇦 CA | GM Original Equipment | View on Amazon |
| GATES Fits: 4.6L V8 | 31103 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MOTORAD Fits: 4.6L V8 | MO99 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| SKP Fits: 4.6L V8 | SKMO99 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Plastic cap | View on Amazon |
This table covers the caps on the oil filler neck.
4 Oil Filler Cap parts are listed for the 2008 Cadillac STS, from ACDELCO, GATES, MOTORAD and 1 other brand.
Listed part numbers: ACDELCO FC215, GATES 31103 and MOTORAD MO99, plus the other parts above.
Oil Filler Cap Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 4.6L V8 | 592250 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SealMaterial: AEM (Ethylene Acrylate Rubber) | View on Amazon |
| ELRING Fits: 4.6L V8 | 823620 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SealMaterial: HNBR (hydrogenated nitrile butadiene rubber) | View on Amazon |
| FEL-PRO Fits: 4.6L V8 | 73193 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Services OEM bonded Cap sealAftermarket Design | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 24100002 | 🇺🇸 US 🇨🇦 CA | Size # 32027.94MM Inner Diameter | View on Amazon |
This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Oil Filler Cap Gasket parts for the 2008 Cadillac STS come from 3 brands — ELRING, FEL-PRO and GM GENUINE.
Part numbers include ELRING 592250, ELRING 823620 and FEL-PRO 73193, among others listed above.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMP / LUBER-FINER Popular Fits: 4.6L V8 | PH59 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Anti-Drain Back Valve: YESSpin-On Filter. | View on Amazon |
| FRAM Fits: 4.6L V8 | FE9837 | 🇺🇸 US 🇨🇦 CA | Spin-OnTough Guard or Synthetic Endurance | View on Amazon |
| FVP Fits: 4.6L V8 | R1522 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| K&N Fits: 4.6L V8 | PS2006 | 🇺🇸 US 🇨🇦 CA | Pro-Series without Wrench Off Nut | View on Amazon |
| PRO-TEC Fits: 4.6L V8 | PXL51522 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VARIOUS MFR Fits: 4.6L V8 | PG5288 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 2.75" Diameter | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 4.6L V8 | UPF61R | 🇺🇸 US 🇨🇦 CA | Gold / Professional SpecialtyULTRAGUARD | View on Amazon |
| FRAM Fits: 4.6L V8 | XG9837 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Ultra SyntheticSpin-On | View on Amazon |
| FRAM Fits: 4.6L V8 | TG9837 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tough GuardSpin-On | View on Amazon |
| MOBIL Fits: 4.6L V8 | M1206A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended PerformanceOutside Diameter: 2.97 (75mm) | View on Amazon |
| WIX Fits: 4.6L V8 | 51522XP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | XP Extreme DutyBest for Synthetic Motor Oils | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 4.6L V8 | PF61E | 🇺🇸 US 🇨🇦 CA | GM Original Equipment | View on Amazon |
| BOSCH Popular Fits: 4.6L V8 | 3423 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Premium Oil Filter | View on Amazon |
| WIX Popular Fits: 4.6L V8 | 51522 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Media Material: Enhanced Cellulose | View on Amazon |
| DENSO Fits: 4.6L V8 | 1502008 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Oil Filter or FTF Engine Oil Filter | View on Amazon |
| FRAM Fits: 4.6L V8 | PH9837 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extra GuardSpin-On | View on Amazon |
| HASTINGS / BALDWIN Fits: 4.6L V8 | LF487 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 4.6L V8 | OC1048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spin-On | View on Amazon |
| VARIOUS MFR Fits: 4.6L V8 | PG5288EX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Life | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
19 Oil Filter parts are listed for the 2008 Cadillac STS, from FRAM, VARIOUS MFR, ACDELCO and 10 other brands. CHAMP / LUBER-FINER PH59 carries the "Popular" badge.
Economy: 6 parts, from CHAMP / LUBER-FINER, FRAM, FVP and 3 other brands. A representative part number is CHAMP / LUBER-FINER PH59.
In the High Performance / Heavy Duty grade, FRAM, ACDELCO, MOBIL and 1 other brand supply 5 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO UPF61R.
The Standard Replacement section: 8 options from ACDELCO, BOSCH, WIX and 5 other brands. ACDELCO PF61E is listed in this group.
Oil Filter Adapter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 24575062 | 🇺🇸 US 🇨🇦 CA | End 1 Outside Diameter (In): 0.73 InMaterial: Steel | View on Amazon |
This table covers the Oil Filter adapters.
This group shows a single part: GM GENUINE 24575062.
Oil Filter Adapter Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 4.6L V8 | 71288 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| GM GENUINE Fits: 4.6L V8 | 12573045 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 4.6L V8 | B32435 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Oil Filter Adapter GasketRubber | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 711458500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | AT OIL FILTER ADAPTER | View on Amazon |
This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
4 Oil Filter Adapter Gasket / O-Ring parts for the 2008 Cadillac STS come from 4 brands — FEL-PRO, GM GENUINE, MAHLE / CLEVITE and 1 other brand.
Listed part numbers: FEL-PRO 71288, GM GENUINE 12573045 and MAHLE / CLEVITE B32435, plus the other parts above.
Oil Filter Bypass Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 25014612 | 🇺🇸 US 🇨🇦 CA | without VAPOR SEPARATOROPENING PRESSURE 21 PSI NOMINAL | View on Amazon |
This table covers the Oil Filter Bypass valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
One part is listed for the 2008 Cadillac STS — GM GENUINE 25014612.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 4.6L V8 | 14119500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| APEX Fits: 4.6L V8 | AOP1145 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FEL-PRO Fits: 4.6L V8 | OS30796R | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Permadry | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 101024501 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Oil Pan Gasket parts are listed for the 2008 Cadillac STS, from AJUSA, APEX, FEL-PRO and 1 other brand.
Listed part numbers: AJUSA 14119500, APEX AOP1145 and FEL-PRO OS30796R, plus the other parts above.
Oil Pan Gasket Rivet
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 12558759 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Pan Gasket rivets.
One part is listed for the 2008 Cadillac STS — GM GENUINE 12558759.
Oil Pump
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 4.6L V8 | EPK116 | 🇺🇸 US | 'Pressure King' Value Line Pump | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 4.6L V8 | M488 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.
2 Oil Pump parts are listed for the 2008 Cadillac STS, from ENGINETECH and MELLING.
Economy: 1 part, from ENGINETECH. A representative part number is ENGINETECH EPK116.
The Standard Replacement section: 1 option from MELLING. MELLING M488 is listed in this group.
Listed part numbers: ENGINETECH EPK116 and MELLING M488.
Piston
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SILV-O-LITE Fits: 4.6L V8 | 3532HC | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hyper-CoatedFloating Pin Type | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 4.6L V8 | P5078 | 🇺🇸 US | Dome Top | View on Amazon |
| ENGINETECH Fits: 4.6L V8 | K50788P | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Dome Topwith Premium Rings | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SILV-O-LITE Fits: 4.6L V8 | 3532HCK1 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Rings | View on Amazon |
This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.
4 Piston parts for the 2008 Cadillac STS come from 2 brands — SILV-O-LITE and ENGINETECH.
In the Premium grade, SILV-O-LITE supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is SILV-O-LITE 3532HC.
Standard Replacement: 2 parts, from ENGINETECH. A representative part number is ENGINETECH P5078.
1 further part sits outside the graded sections, with the same engine-level match.
Part numbers include SILV-O-LITE 3532HC, ENGINETECH P5078 and ENGINETECH K50788P, among others listed above.
Piston Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 4.6L V8 | S93158 | 🇺🇸 US | Steel Top PremiumSet | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | 41930CP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material Carbon Steel / Cast Iron / Stainless SteelPremium | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
2 Piston Ring parts for the 2008 Cadillac STS come from 2 brands — ENGINETECH and MAHLE / CLEVITE.
This group includes ENGINETECH S93158 and MAHLE / CLEVITE 41930CP.
Rocker Arm
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 12693909 | 🇺🇸 US 🇨🇦 CA | Optional with 24100294 | View on Amazon |
| MELLING Fits: 4.6L V8 | MR1340 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| QUALCAST Fits: 4.6L V8 | 402917 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the rocker arms that transfer cam motion to the valves.
3 Rocker Arm parts are listed for the 2008 Cadillac STS, from GM GENUINE, MELLING and QUALCAST.
Listed part numbers: GM GENUINE 12693909, MELLING MR1340 and QUALCAST 402917.
Timing Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 4.6L V8 | 8MMSRH62 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
| MELLING Popular Fits: 4.6L V8 | 8MMSRH126 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Upper | View on Amazon |
| CLOYES Fits: 4.6L V8 | 94187 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
| CLOYES Fits: 4.6L V8 | 94186 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Upper | View on Amazon |
| INA Fits: 4.6L V8 | ZCC1098 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | CAM TO CAM | View on Amazon |
| INA Fits: 4.6L V8 | ZC94187 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PRIMARY | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | C1562 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LowerPrimary Timing Chain | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | C15126 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | UpperSecondary Timing Chain | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | RC1020 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PRIMARY | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | C1098 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | CAM TO CAM | View on Amazon |
This table covers the timing chains that keep the cams in time with the crank.
10 Timing Chain parts for the 2008 Cadillac STS come from 5 brands — MELLING, CLOYES, INA and 2 other brands. The "Popular" part is MELLING 8MMSRH62.
Timing Chain & Component Kit
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | TS21562 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Sprockets Not Included | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | 76318S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes 3 Chains, 3 Guides, 2 Tensioner Arms, 3 Tensioners | View on Amazon |
| SKP Fits: 4.6L V8 | SK94186S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Sprockets Not Included | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 4.6L V8 | 94186SX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Does Not Include SprocketsIncludes: Timing Chain (3), Timing Chain Tensioner (3), Timing Chain Guide (3), Timing Chain Tensioner Guide (2) | View on Amazon |
| INA Fits: 4.6L V8 | ZC76318S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes 3 Chains, 3 Guides, 2 Tensioner Arms, 3 TensionersDoes Not Include Cam Sprocket | View on Amazon |
This table covers kits that group a timing chain with the related tensioners and guides.
5 Timing Chain & Component Kit parts are listed for the 2008 Cadillac STS, from PREFERRED COMPONENTS INC, S.A. GEAR, SKP and 2 other brands. CLOYES 94186SX carries the "Popular" badge.
Economy: 3 parts, from PREFERRED COMPONENTS INC, S.A. GEAR and SKP. A representative part number is PREFERRED COMPONENTS INC TS21562.
The Standard Replacement section: 2 options from CLOYES and INA. CLOYES 94186SX is listed in this group.
Listed part numbers: CLOYES 94186SX, PREFERRED COMPONENTS INC TS21562 and S.A. GEAR 76318S, plus the other parts above.
Timing Chain Guide / Damper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 4.6L V8 | BG310 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Upper | View on Amazon |
| MELLING Popular Fits: 4.6L V8 | BG309 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left Lower | View on Amazon |
| MELLING Popular Fits: 4.6L V8 | BD311 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner ArmLeft | View on Amazon |
| S.A. GEAR Popular Fits: 4.6L V8 | 7311 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LEFTARM ONLY | View on Amazon |
| CLOYES Fits: 4.6L V8 | 95309 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Guide | View on Amazon |
| CLOYES Fits: 4.6L V8 | 95310 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Guide | View on Amazon |
| CLOYES Fits: 4.6L V8 | 95311 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| CLOYES Fits: 4.6L V8 | 95312 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| INA Fits: 4.6L V8 | ZG71157 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PRIMARY | View on Amazon |
| INA Fits: 4.6L V8 | ZG71158 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | R75310 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Upper | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | R75309 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left Lower | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | R75311 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner ArmLeft | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | 71157 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PRIMARY | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | 71158 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| S.A. GEAR Fits: 4.6L V8 | 91216 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tensioner ArmRight Only | View on Amazon |
This table covers the guides and dampers that keep the timing chain on its path.
16 Timing Chain Guide / Damper parts for the 2008 Cadillac STS come from 5 brands — S.A. GEAR, CLOYES, MELLING and 2 other brands. The "Popular" part is MELLING BG310.
Timing Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 4.6L V8 | 12581223 | 🇺🇸 US 🇨🇦 CA | CenterPrimary | View on Amazon |
| MELLING Popular Fits: 4.6L V8 | BT314 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
| MELLING Popular Fits: 4.6L V8 | BT313 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Upper | View on Amazon |
| CLOYES Fits: 4.6L V8 | 95314 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Lower | View on Amazon |
| CLOYES Fits: 4.6L V8 | 95313 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left Upper | View on Amazon |
| INA Fits: 4.6L V8 | ZT91219 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightSecondary | View on Amazon |
| INA Fits: 4.6L V8 | ZT95313 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LeftSecondary | View on Amazon |
| INA Fits: 4.6L V8 | ZT95314 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PRIMARY | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | T65314 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LowerPrimary | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | T65313 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left UpperSecondary | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | T65313A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right UpperSecondary | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | 9313 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LeftSecondary | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | 91219 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightSecondary | View on Amazon |
| S.A. GEAR Fits: 4.6L V8 | 9314 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PRIMARY | View on Amazon |
This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
14 Timing Chain Tensioner parts are listed for the 2008 Cadillac STS, from INA, PREFERRED COMPONENTS INC, S.A. GEAR and 3 other brands. GM GENUINE 12581223 carries the "Popular" badge.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 4.6L V8 | JV5152 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2008 Cadillac STS — MAHLE / CLEVITE JV5152.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Fits: 4.6L V8 | 20557A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WJB / INMOTION PARTS Fits: 4.6L V8 | WS20557A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 2.622 Bore Diameter0.311 Width | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Timing Cover Seal parts are listed for the 2008 Cadillac STS, from SKF and WJB / INMOTION PARTS.
Listed part numbers: SKF 20557A and WJB / INMOTION PARTS WS20557A.
Timing Idler Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP Fits: 4.6L V8 | S772T | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| GM GENUINE Fits: 4.6L V8 | 12577433 | 🇺🇸 US 🇨🇦 CA | Intermediate Gear | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 4.6L V8 | G55772 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Timing Idler sprockets.
3 Timing Idler Sprocket parts for the 2008 Cadillac STS come from 3 brands — FVP, GM GENUINE and PREFERRED COMPONENTS INC.
Part numbers include FVP S772T, GM GENUINE 12577433 and PREFERRED COMPONENTS INC G55772.
Valve Cover Bolt / Screw
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 12557829 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Valve Cover Bolt screws. Typical signs include a rounded head, a seeping bleeder, or a fastener that will not hold torque. Do not force a new screw into a stripped hole — repair the thread first.
This group shows a single part: GM GENUINE 12557829.
Valve Cover Bolt Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 12573742 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the seals at the Valve Cover Bolt. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: GM GENUINE 12573742.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 4.6L V8 | VS50728R | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Perma Dry Molded RubberIncludes Spark Plug Tube Seals and Valve Cover Grommets | View on Amazon |
| APEX Fits: 4.6L V8 | AVC1145S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Grommets & Spark Plug Tube Seals | View on Amazon |
| GM GENUINE Fits: 4.6L V8 | 12576396 | 🇺🇸 US 🇨🇦 CA | SPARK PLUG HOLES | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | VS50483 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMolded Rubber | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 151074001 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Valve Cover Gasket parts are listed for the 2008 Cadillac STS, from FEL-PRO, APEX, GM GENUINE and 2 other brands. FEL-PRO VS50728R carries the "Popular" badge.
Listed part numbers: FEL-PRO VS50728R, APEX AVC1145S and GM GENUINE 12576396, plus the other parts above.
Valve Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 4.6L V8 | GD3056 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Iron | View on Amazon |
| ENGINETECH Fits: 4.6L V8 | GD3057 | 🇺🇸 US | Iron | View on Amazon |
| SBI Fits: 4.6L V8 | 1403056 | 🇺🇸 US 🇨🇦 CA | Intake0.2350 I.D. | View on Amazon |
| SBI Fits: 4.6L V8 | 1403057 | 🇺🇸 US 🇨🇦 CA | Exhaust0.2350 I.D. | View on Amazon |
This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.
4 Valve Guide parts are listed for the 2008 Cadillac STS, from ENGINETECH and SBI.
Listed part numbers: ENGINETECH GD3056, ENGINETECH GD3057 and SBI 1403056, plus the other parts above.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 4.6L V8 | L2319 | 🇺🇸 US | Hydraulic | View on Amazon |
| MELLING Popular Fits: 4.6L V8 | JB7524 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hydraulic | View on Amazon |
| AJUSA Fits: 4.6L V8 | 85018700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| GM GENUINE Fits: 4.6L V8 | HL129 | 🇺🇸 US 🇨🇦 CA | Sold Individually | View on Amazon |
| QUALCAST Fits: 4.6L V8 | 367082 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Hydraulic Lash Adjuster | View on Amazon |
| SBI Fits: 4.6L V8 | VL175 | 🇺🇸 US 🇨🇦 CA | Hydraulic Lash Adjuster Type | View on Amazon |
| SEALED POWER Fits: 4.6L V8 | HT2307 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
7 Valve Lifter parts are listed for the 2008 Cadillac STS, from ENGINETECH, MELLING, AJUSA and 4 other brands. ENGINETECH L2319 carries the "Popular" badge.
Part numbers include ENGINETECH L2319, MELLING JB7524 and AJUSA 85018700, among others listed above.
Valve Spring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 12565199 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SBI Fits: 4.6L V8 | 1601634 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust1.656 Length | View on Amazon |
This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.
2 Valve Spring parts for the 2008 Cadillac STS come from 2 brands — GM GENUINE and SBI.
Part numbers include GM GENUINE 12565199 and SBI 1601634.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 4.6L V8 | 01647209 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| QUALCAST Fits: 4.6L V8 | 3407209 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1 Round Groove | View on Amazon |
| SBI Fits: 4.6L V8 | 1211081 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2870 Length | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
3 Valve Spring Retainer Keeper parts for the 2008 Cadillac STS come from 3 brands — GM GENUINE, QUALCAST and SBI.
Listed part numbers: GM GENUINE 01647209, QUALCAST 3407209 and SBI 1211081.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 4.6L V8 | S420V | 🇺🇸 US | Viton | View on Amazon |
| FEL-PRO Popular Fits: 4.6L V8 | SS71043 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| APEX Fits: 4.6L V8 | AVS3103 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 4.6L V8 | SS45930 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMetal with Molded Rubber | View on Amazon |
| QUALCAST Fits: 4.6L V8 | 3835445 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Viton Top Hat | View on Amazon |
| SBI Fits: 4.6L V8 | 1221349 | 🇺🇸 US 🇨🇦 CA | Intake and ExhaustViton Material | View on Amazon |
| VICTOR REINZ Fits: 4.6L V8 | 121007801 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetSealing Surface Type: Flanged | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
7 Valve Stem Seal parts are listed for the 2008 Cadillac STS, from ENGINETECH, FEL-PRO, APEX and 4 other brands. ENGINETECH S420V carries the "Popular" badge.
This group includes ENGINETECH S420V, FEL-PRO SS71043 and APEX AVS3103 and the remaining parts above.
Variable Valve Timing (VVT) Solenoid / Actuator
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 4.6L V8 | 916892 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Adjuster Magnet | View on Amazon |
| DORMAN Fits: 4.6L V8 | 916870 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Oil Control | View on Amazon |
| GATES Fits: 4.6L V8 | VVS378 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WELLS Fits: 4.6L V8 | 2T1256 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Adjuster Magnet | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 4.6L V8 | 12567085 | 🇺🇸 US 🇨🇦 CA | Adjuster Magnet | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 4.6L V8 | VVT378 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Adjuster Magnet | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
6 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2008 Cadillac STS, from DORMAN, GATES, WELLS and 2 other brands. DORMAN 916892 carries the "Popular" badge.
Economy: 4 parts, from DORMAN, GATES and WELLS. A representative part number is DORMAN 916892.
The Standard Replacement section: 2 options from GM GENUINE and STANDARD MOTOR PRODUCTS. GM GENUINE 12567085 is listed in this group.
Listed part numbers: DORMAN 916892, DORMAN 916870 and GATES VVS378, plus the other parts above.
Variable Valve Timing (VVT) Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 4.6L V8 | VVT618 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake (Left) | View on Amazon |
| WELLS Fits: 4.6L V8 | 3T1152 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake (Left) | View on Amazon |
This table covers the cam phaser sprockets used by the variable-valve-timing system.
2 Variable Valve Timing (VVT) Sprocket parts are listed for the 2008 Cadillac STS, from STANDARD MOTOR PRODUCTS and WELLS.
Part numbers include STANDARD MOTOR PRODUCTS VVT618 and WELLS 3T1152.
Buying Engine Parts for a 2008 Cadillac STS
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil and Oil Filter .
Frequently Asked Questions
How many engine parts fit the 2008 Cadillac STS?
Our catalog currently lists 259 engine parts for the 2008 Cadillac STS across 59 subcategories and 53 brands, covering all 3 engine options (3.6L V6, 4.4L V8 Supercharged and 4.6L V8). Each part is matched to the engine(s) it fits.
Do engine parts differ between 2008 Cadillac STS engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2008 Cadillac STS?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2008 Cadillac STS?
Oil rows on this page include SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2008 Cadillac STS was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2008 Cadillac STS?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2008 Cadillac STS
Engine Parts for Other Cadillac STS Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.