This page lists 846 drivetrain parts for the 2013 Cadillac Escalade, across 120 part types, covering both the 6.0L V8 ELECTRIC/GAS and the 6.2L V8. Every part shows its brand, manufacturer part number and fitment notes.
On the 2013 Cadillac Escalade, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. 167 parts of the 846 listed are Differential Pinion Bearing / Race (69 parts), Differential Rebuild Kit (52 parts) and Universal Joint (46 parts). The other 117 part types cover the remaining 679 parts.
The 2013 Cadillac Escalade was sold with both the 6.0L V8 ELECTRIC/GAS and the 6.2L V8. 491 parts fit every engine; the other 355 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2013 Cadillac Escalade drivetrain parts are GM GENUINE (185 parts), USA STANDARD GEAR (88 parts) and MOTIVE GEAR (62 parts), plus 44 more brands. Quality grades include Standard Replacement, Economy and Standard Kit.
145 parts on this 2013 Cadillac Escalade page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including WELLS 7F2000 (4WD Actuator) and GM GENUINE 15522141 (4WD Actuator Clutch Sleeve Shim). Click any part number to see every vehicle that part fits.
4WD Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Popular Fits: all 2013 Escalade engines | 7F2000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| AAM Fits: all 2013 Escalade engines | 40007173 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 5 Blade Connectorwith 8.25 (In) Front Axle | View on Amazon |
| DANA Fits: 6.2L V8 | 10033320 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 26060073 | 🇺🇸 US 🇨🇦 CA | AWDSQUARE PLUG | View on Amazon |
| ROSTRA Fits: all 2013 Escalade engines | 730003 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 5 Blade Terminals4WD On Demand Conversion | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 6.0L V8 ELECTRIC/GAS | TCA22 | 🇺🇸 US 🇨🇦 CA | 4WDOE Type | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 6.0L V8 ELECTRIC/GAS | TCA20 | 🇺🇸 US 🇨🇦 CA | 4WDFour Wheel on Demand Conversion | View on Amazon |
This table covers the actuators that engage four-wheel drive at the transfer case or axle. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
7 4WD Actuator parts are listed for the 2013 Cadillac Escalade, from STANDARD MOTOR PRODUCTS, WELLS, AAM and 3 other brands. WELLS 7F2000 carries the "Popular" badge. 3 parts fit every engine; the other 4 are engine-specific.
Part numbers include WELLS 7F2000, AAM 40007173 and DANA 10033320, among others listed above.
4WD Actuator Clutch Shaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AAM Fits: all 2013 Escalade engines | 40029249 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 8.25 (In) Front Axle | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19121908 | 🇺🇸 US 🇨🇦 CA | Includes Bearing | View on Amazon |
This table covers the 4WD Actuator Clutch shafts.
2 4WD Actuator Clutch Shaft parts for the 2013 Cadillac Escalade come from 2 brands — AAM and GM GENUINE. 1 part fits every engine; the other 1 is engine-specific.
Part numbers include AAM 40029249 and GM GENUINE 19121908.
4WD Actuator Clutch Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 25818427 | 🇺🇸 US 🇨🇦 CA | AWD | View on Amazon |
This table covers the 4WD Actuator Clutch sleeves.
This group shows a single part: GM GENUINE 25818427.
4WD Actuator Clutch Sleeve Shim
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 6.2L V8 | 15522141 | 🇺🇸 US 🇨🇦 CA | AWD2.30mm | View on Amazon |
| GM GENUINE Popular Fits: 6.2L V8 | 15522140 | 🇺🇸 US 🇨🇦 CA | AWD1.80mm | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 15522142 | 🇺🇸 US 🇨🇦 CA | AWD2.80mm | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 26065989 | 🇺🇸 US 🇨🇦 CA | AWD3.55mm | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 26065988 | 🇺🇸 US 🇨🇦 CA | AWD3.05mm | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 26065987 | 🇺🇸 US 🇨🇦 CA | AWD2.54mm | View on Amazon |
This table covers the 4WD Actuator Clutch Sleeve shims.
GM GENUINE supplies the 6 4WD Actuator Clutch Sleeve Shim parts for the 2013 Cadillac Escalade. GM GENUINE 15522141 carries the "Popular" badge.
Part numbers include GM GENUINE 15522141, GM GENUINE 15522140 and GM GENUINE 15522142, among others listed above.
4WD Actuator Fork
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 12479213 | 🇺🇸 US 🇨🇦 CA | AWD | View on Amazon |
This table covers the forks a 4WD actuator moves.
One part is listed for the 2013 Cadillac Escalade — GM GENUINE 12479213.
4WD Actuator Housing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 84242534 | 🇺🇸 US 🇨🇦 CA | Fits AWDSwitch Activated 2-Speed Transfer Case (NQH) | View on Amazon |
This table covers the 4WD Actuator housings.
This group shows a single part: GM GENUINE 84242534.
4WD Disconnect
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AAM Fits: 6.2L V8 | 40210868 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spline Quantity: 28 | View on Amazon |
This table covers the disconnects that freewheel a front axle in two-wheel drive.
This group shows a single part: AAM 40210868.
Axle / Differential Assembly
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP Fits: 6.2L V8 | 111509 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Axle Ratio: 3.42 Ratio | View on Amazon |
| ATP Fits: 6.2L V8 | 111514 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Axle Ratio: 3.08 Ratio | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 84554713 | 🇺🇸 US 🇨🇦 CA | Fits 8.50/8.625 Ring Gear3.73 Rear Axle Ratio (GT4) | View on Amazon |
This table covers the Axle / Differential assemblies.
3 Axle / Differential Assembly parts are listed for the 2013 Cadillac Escalade, from ATP and GM GENUINE. 1 part fits every engine; the other 2 are engine-specific.
This group includes ATP 111509, ATP 111514 and GM GENUINE 84554713.
Axle Housing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: all 2013 Escalade engines | 23129861 | 🇺🇸 US 🇨🇦 CA | 8.50/8.625 Ring Gear Saginaw-American Axle10 Bolt Diff | View on Amazon |
This table covers the Axle housings.
This group shows a single part: ACDELCO 23129861.
Axle Intermediate Shaft Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AAM Fits: all 2013 Escalade engines | 26041516 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right11x17x13mm | View on Amazon |
This table covers the Axle Intermediate Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
This group shows a single part: AAM 26041516.
Axle Shaft
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular Fits: all 2013 Escalade engines | 2023480 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SVL | View on Amazon |
| DORMAN Fits: all 2013 Escalade engines | 630636 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left Inner | View on Amazon |
| DORMAN Fits: 6.0L V8 ELECTRIC/GAS | 630637 | 🇺🇸 US 🇨🇦 CA | Front Right Inner | View on Amazon |
| DORMAN Fits: all 2013 Escalade engines | 630325 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Rear Left9.5" Ring Gear | View on Amazon |
| DORMAN Fits: all 2013 Escalade engines | 630324 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Rear Right8.5" RING GEAR | View on Amazon |
| DORMAN Fits: 6.2L V8 | 630324A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Does Not Include Bearing, Seal, or Hardware | View on Amazon |
| RICHMOND Fits: all 2013 Escalade engines | 9225173 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Excel34.09" Overall Length | View on Amazon |
| RICHMOND Fits: all 2013 Escalade engines | 9225174 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Excel34.02" Overall Length | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AAM Popular Fits: all 2013 Escalade engines | 40104064 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Leftwith 8.25 (In) Front Axle | View on Amazon |
| AAM Popular Fits: all 2013 Escalade engines | 40019701 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Wheel Studs Not Includedwith 8.6 (In) Axle | View on Amazon |
| MOTIVE GEAR Popular Fits: all 2013 Escalade engines | 40019701 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 34.09" Overall Length6 x 5.5 Lug Pattern | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 40104063 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 8.25 (In) Front AxleRight Side | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 40103094 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwithout Wheel Studs | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 22943112 | 🇺🇸 US 🇨🇦 CA | Rearwith 6 WHEEL STUDS | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 22874951 | 🇺🇸 US 🇨🇦 CA | Rear8.50/8.625 Ring Gear Saginaw - American Axle | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | ZAK630324 | 🇺🇸 US 🇨🇦 CA | Axle Shaft Kit30 Spline | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | USA21884 | 🇺🇸 US 🇨🇦 CA | Front RightEscalade EXT | View on Amazon |
This table covers the Axle shafts.
17 Axle Shaft parts are listed for the 2013 Cadillac Escalade, from DORMAN, AAM, RICHMOND and 4 other brands. DANA 2023480 carries the "Popular" badge. 14 parts fit every engine; the other 3 are engine-specific.
In the Economy grade, DORMAN, RICHMOND and DANA supply 8 parts: the catalog's value-priced group. A representative part number is DANA 2023480.
The Standard Replacement section lists 9 options from AAM, GM GENUINE, USA STANDARD GEAR and 1 other brand — built to original-equipment specification. AAM 40104064 is listed in this group.
Axle Shaft Bearing
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Fits: 6.2L V8 | WRSCH208 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front OuterAWD | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | WRB2010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front InnerAWD | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 6.2L V8 | RW2010 | 🇺🇸 US 🇨🇦 CA | Rear8.50/8.625 Ring Gear Saginaw - American AXLE 10 Bolt Differential or 9.50 Ring Gear Saginaw - American Axle | View on Amazon |
| MOTIVE GEAR Popular Fits: 6.2L V8 | KIT513067 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Axle Differential Bearing and Seal Kit | View on Amazon |
| SKF Popular Fits: 6.2L V8 | B2010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front LeftAWD | View on Amazon |
| TIMKEN Popular Fits: 6.2L V8 | 513067 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| ACDELCO Fits: 6.2L V8 | RP513067 | 🇺🇸 US 🇨🇦 CA | Gold / ProfessionalRepair Bearing | View on Amazon |
| BCA Fits: 6.2L V8 | NBSCH208 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Outerwith AAM Axle | View on Amazon |
| BCA Fits: 6.2L V8 | NBB2010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Innerwith AAM Axle | View on Amazon |
| BCA Fits: 6.2L V8 | NBRP513067 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Repair Bearing | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 26041515 | 🇺🇸 US 🇨🇦 CA | Front InnerAWD | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 26066885 | 🇺🇸 US 🇨🇦 CA | Front InnerAWD | View on Amazon |
| NATIONAL Fits: 6.2L V8 | B2010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front InnerAWD | View on Amazon |
| NATIONAL Fits: 6.2L V8 | SCH208 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front OuterAWD | View on Amazon |
| SCHAEFFLER Fits: 6.2L V8 | B2010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Front LeftAWD | View on Amazon |
| SCHAEFFLER Fits: 6.2L V8 | DR0151K | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Repair Bearing | View on Amazon |
| SKF Fits: 6.2L V8 | BH208 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front RightAWD | View on Amazon |
| TIMKEN Fits: 6.2L V8 | SCH208 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Needle Bearing | View on Amazon |
| TIMKEN Fits: 6.2L V8 | B2010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Needle Bearing1.5 Housing Diameter | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | USA10005 | 🇺🇸 US | Axle Shaft Bearing KitC10 Aero | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 6.0L V8 ELECTRIC/GAS | RW2010 | 🇺🇸 US 🇨🇦 CA | Rear8.50/8.625 Ring Gear Saginaw - American AXLE 10 Bolt Differential or 9.50 Ring Gear Saginaw - American Axle | View on Amazon |
| TIMKEN Popular Fits: 6.0L V8 ELECTRIC/GAS | 513067 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| ACDELCO Fits: 6.0L V8 ELECTRIC/GAS | RP513067 | 🇺🇸 US 🇨🇦 CA | Gold / ProfessionalRepair Bearing | View on Amazon |
| BCA Fits: 6.0L V8 ELECTRIC/GAS | NBSCH208 | 🇺🇸 US 🇨🇦 CA | Front Outerwith AAM Axle | View on Amazon |
| BCA Fits: 6.0L V8 ELECTRIC/GAS | NBB2010 | 🇺🇸 US 🇨🇦 CA | Front Innerwith AAM Axle | View on Amazon |
| BCA Fits: 6.0L V8 ELECTRIC/GAS | NBRP513067 | 🇺🇸 US 🇨🇦 CA | Repair Bearing | View on Amazon |
| MOTIVE GEAR Fits: 6.0L V8 ELECTRIC/GAS | KIT513067 | 🇺🇸 US 🇨🇦 CA | Axle Differential Bearing and Seal Kit | View on Amazon |
| SCHAEFFLER Fits: 6.0L V8 ELECTRIC/GAS | B2010 | 🇺🇸 US 🇨🇦 CA | Front Inner8.25" Ring Gear | View on Amazon |
| SCHAEFFLER Fits: 6.0L V8 ELECTRIC/GAS | DR0151K | 🇺🇸 US 🇨🇦 CA | Repair Bearing | View on Amazon |
| USA STANDARD GEAR Fits: 6.0L V8 ELECTRIC/GAS | USA10005 | 🇺🇸 US | Axle Shaft Bearing KitC10 Aero | View on Amazon |
This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
30 Axle Shaft Bearing parts are listed for the 2013 Cadillac Escalade, from BCA, GM GENUINE, TIMKEN and 7 other brands. GM GENUINE RW2010 carries the "Popular" badge. Economy and Standard Replacement are all represented, and Standard Replacement alone accounts for 18 parts.
Axle Shaft Housing / Tube
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 22942970 | 🇺🇸 US 🇨🇦 CA | Fits AWDwith Dual Seal Flange | View on Amazon |
This table covers the Axle Shaft Housing tubes.
One part is listed for the 2013 Cadillac Escalade — GM GENUINE 22942970.
Axle Shaft Lock / Snap Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AAM Fits: 6.2L V8 | 40023211 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Escalade ESV or Escalade EXTwith 8.25 (In) Front Axle | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 12479372 | 🇺🇸 US 🇨🇦 CA | Front InnerAWD | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 26056600 | 🇺🇸 US 🇨🇦 CA | Material: Steel | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | USA33369 | 🇺🇸 US | Inner Axle Snap Ring | View on Amazon |
This table covers the Axle Shaft Lock / Snap rings.
4 Axle Shaft Lock / Snap Ring parts are listed for the 2013 Cadillac Escalade, from GM GENUINE, AAM and USA STANDARD GEAR.
This group includes AAM 40023211, GM GENUINE 12479372 and GM GENUINE 26056600 and the remaining parts above.
Axle Shaft Pilot Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 6.2L V8 | RW203 | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NBSCH78 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Frontwith AAM Axle(s) | View on Amazon |
| SCHAEFFLER Fits: all 2013 Escalade engines | SCH78 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front8.25" Ring Gear | View on Amazon |
| SKF Fits: 6.2L V8 | BH78 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontAWD | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | WRSCH78 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontAWD | View on Amazon |
This table covers the Axle Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
5 Axle Shaft Pilot Bearing parts are listed for the 2013 Cadillac Escalade, from GM GENUINE, BCA, SCHAEFFLER and 2 other brands. GM GENUINE RW203 carries the "Popular" badge. 2 parts fit every engine; the other 3 are engine-specific.
Listed part numbers: GM GENUINE RW203, BCA NBSCH78 and SCHAEFFLER SCH78, plus the other parts above.
Axle Shaft Retainer / Clip
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2013 Escalade engines | 13851 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear9.5" Ring Gear or 9.75" Ring Gear | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 03833322 | 🇺🇸 US 🇨🇦 CA | Rear AxleSingle Use | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 14012746 | 🇺🇸 US 🇨🇦 CA | Rear Axle9.50 Ring Gear Saginaw - American Axle | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | 3833322 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearGM 8.5"/8.625" | View on Amazon |
This table covers the Axle Shaft retainers and clips.
4 Axle Shaft Retainer / Clip parts for the 2013 Cadillac Escalade come from 3 brands — GM GENUINE, DORMAN and MOTIVE GEAR. Every part fits both the 6.0L V8 ELECTRIC/GAS and the 6.2L V8.
Part numbers include DORMAN 13851, GM GENUINE 03833322 and GM GENUINE 14012746, among others listed above.
Axle Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: all 2013 Escalade engines | 291315 | 🇺🇸 US 🇨🇦 CA | Color: Black, Orange | View on Amazon |
| TIMKEN Popular Fits: all 2013 Escalade engines | 4762N | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| TIMKEN Popular Fits: 6.2L V8 | 710648 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontAWD | View on Amazon |
| AAM Fits: 6.2L V8 | 40038875 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontEscalade ESV or Escalade EXT | View on Amazon |
| ACDELCO Fits: 6.2L V8 | 710648 | 🇺🇸 US 🇨🇦 CA | Gold | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NS710648 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Innerwith AAM Axle(s) | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 22761722 | 🇺🇸 US | Front InnerAWD | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | 16146CR | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear2.849" OD, 1.618" ID, .5" Wide | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | 4762N | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear2.841" OD, 1.618" ID, .5" Wide | View on Amazon |
| NATIONAL Fits: 6.2L V8 | 710648 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front InnerAWD | View on Amazon |
| SCHAEFFLER Fits: 6.2L V8 | SS2332 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front InnerAWD | View on Amazon |
| SKF Fits: 6.2L V8 | 12470 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontAWD | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA30108 | 🇺🇸 US | Yukon Mighty Seal | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA30273 | 🇺🇸 US 🇨🇦 CA | Yukon Mighty Seal | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | WS710648 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front InnerAWD | View on Amazon |
This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
15 Axle Shaft Seal parts for the 2013 Cadillac Escalade come from 11 brands — GM GENUINE, TIMKEN, MOTIVE GEAR and 8 other brands. The "Popular" part is GM GENUINE 291315. 7 parts fit every engine; the other 8 are engine-specific.
Axle Vent Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: all 2013 Escalade engines | 26063647 | 🇺🇸 US 🇨🇦 CA | Fits RearSTRAIGHT CONNECTOR | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 12471619 | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
This table covers the Axle Vent valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
2 Axle Vent Valve parts for the 2013 Cadillac Escalade come from GM GENUINE. 1 part fits every engine; the other 1 is engine-specific.
Listed part numbers: GM GENUINE 26063647 and GM GENUINE 12471619.
CV Axle
Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GSP Fits: all 2013 Escalade engines | NCV10143XD | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Xtreme Duty CV AxleFor Extreme Operating Temperatures | View on Amazon |
| TOP NOTCH Fits: all 2013 Escalade engines | TN20095XD | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Xtreme Duty | View on Amazon |
| TRAKMOTIVE Fits: 6.2L V8 | GM86228HDX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extreme Duty | View on Amazon |
Specialty - For Lifted Vehicles
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GSP Fits: all 2013 Escalade engines | NCV10143XDP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Travel CV Axle | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GSP Popular Fits: all 2013 Escalade engines | NCV10143 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Frontwith Standard Suspension | View on Amazon |
| TOP NOTCH Popular Fits: all 2013 Escalade engines | TN20095 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Frontwith Standard Suspension | View on Amazon |
| TRAKMOTIVE Popular Fits: 6.2L V8 | GM86228 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontAWD | View on Amazon |
| APWI Fits: all 2013 Escalade engines | GM8395XA | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Severe-DutyExtended Travel Extreme-Angle Design | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 86371672 | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes.
9 CV Axle parts for the 2013 Cadillac Escalade come from 5 brands — GSP, TOP NOTCH, TRAKMOTIVE and 2 other brands. The "Popular" part is GSP NCV10143. 6 parts fit every engine; the other 3 are engine-specific.
In the Heavy Duty grade, GSP, TOP NOTCH and TRAKMOTIVE supply 3 parts: rated for severe service. A representative part number is GSP NCV10143XD.
In the Specialty - For Lifted Vehicles grade, GSP supplies 1 part: grouped under the catalog's "Specialty - For Lifted Vehicles" designation — the notes column spells out what sets them apart. A representative part number is GSP NCV10143XDP.
Standard Replacement: 5 parts, from GSP, TOP NOTCH, TRAKMOTIVE and 2 other brands. A representative part number is GSP NCV10143.
Part numbers include GSP NCV10143, GSP NCV10143XD and TOP NOTCH TN20095XD, among others listed above.
CV Intermediate Shaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Fits: 6.2L V8 | USA21881 | 🇺🇸 US 🇨🇦 CA | Front LeftAWD | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | USA21886 | 🇺🇸 US 🇨🇦 CA | Front Right InnerAWD | View on Amazon |
This table covers the CV Intermediate shafts.
USA STANDARD GEAR supplies both parts for the 2013 Cadillac Escalade.
Part numbers include USA STANDARD GEAR USA21881 and USA STANDARD GEAR USA21886.
CV Joint
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 22928970 | 🇺🇸 US 🇨🇦 CA | Front OuterAWD | View on Amazon |
| VAICO Fits: 6.2L V8 | V510521 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front OuterAWD | View on Amazon |
| VAICO Fits: 6.2L V8 | V510523 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front InnerAWD | View on Amazon |
This table covers the constant-velocity joints at each end of a drive axle.
3 CV Joint parts for the 2013 Cadillac Escalade come from 2 brands — VAICO and GM GENUINE.
This group includes GM GENUINE 22928970, VAICO V510521 and VAICO V510523.
CV Joint Boot
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MEVOTECH Popular Fits: all 2013 Escalade engines | DX428 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front OuterEscalade Base Model | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 12471527 | 🇺🇸 US 🇨🇦 CA | Includes Clamps | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19256072 | 🇺🇸 US 🇨🇦 CA | Joint End Inside Diameter: 3.27 In | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19256071 | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
| MEVOTECH Fits: all 2013 Escalade engines | DX552 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Inner | View on Amazon |
| VAICO Fits: 6.0L V8 ELECTRIC/GAS | V510513 | 🇺🇸 US | Front InnerRWD | View on Amazon |
This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn.
6 CV Joint Boot parts for the 2013 Cadillac Escalade come from 3 brands — GM GENUINE, MEVOTECH and VAICO. The "Popular" part is MEVOTECH DX428. 2 parts fit every engine; the other 4 are engine-specific.
Part numbers include MEVOTECH DX428, GM GENUINE 12471527 and GM GENUINE 19256072, among others listed above.
CV Joint Lock Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 07849284 | 🇺🇸 US 🇨🇦 CA | Compression Tool Required: YES | View on Amazon |
This table covers the CV Joint Lock rings.
One part is listed for the 2013 Cadillac Escalade — GM GENUINE 07849284.
Differential Bearing Adjuster
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Popular Fits: 6.2L V8 | USA33357 | 🇺🇸 US | Differential Carrier Bearing Adjuster | View on Amazon |
| DORMAN Fits: 6.2L V8 | 697041 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Nut Lock | View on Amazon |
| DORMAN Fits: 6.2L V8 | 697042 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Nut Lock | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 22934983 | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | USA33356 | 🇺🇸 US | Differential Carrier Bearing AdjusterLock Ring Design | View on Amazon |
This table covers the adjusters that set differential bearing preload.
5 Differential Bearing Adjuster parts for the 2013 Cadillac Escalade come from 3 brands — USA STANDARD GEAR, DORMAN and GM GENUINE. The "Popular" part is USA STANDARD GEAR USA33357.
Part numbers include USA STANDARD GEAR USA33357, DORMAN 697041 and DORMAN 697042, among others listed above.
Differential Bearing Adjuster Nut Lock
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AAM Fits: 6.2L V8 | 40133900 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Escalade ESV or Escalade EXTwith 8.25 (In) Front Axle | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 23484390 | 🇺🇸 US 🇨🇦 CA | AWD | View on Amazon |
This table covers the Differential Bearing Adjuster Nut locks.
2 Differential Bearing Adjuster Nut Lock parts for the 2013 Cadillac Escalade come from 2 brands — AAM and GM GENUINE.
This group includes AAM 40133900 and GM GENUINE 23484390.
Differential Carrier
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2013 Escalade engines | 697909 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear10 Bolt Differential Cover | View on Amazon |
| DORMAN Fits: 6.2L V8 | 697393 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontAWD | View on Amazon |
| RICHMOND Fits: all 2013 Escalade engines | XL5046 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | EXCelEmpty Carrier | View on Amazon |
| RICHMOND Fits: all 2013 Escalade engines | XL5050 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Excel30 Spline | View on Amazon |
| RICHMOND Fits: all 2013 Escalade engines | XL5055 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | EXCel | View on Amazon |
| RICHMOND Fits: 6.2L V8 | XL5042 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | EXCel | View on Amazon |
Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Popular Fits: all 2013 Escalade engines | USA26016 | 🇺🇸 US | Yukon Dura Grip | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AAM Popular Fits: 6.2L V8 | 40195444 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Escalade ESV or Escalade EXTwith 8.25 (In) Front Axle | View on Amazon |
| AAM Popular Fits: all 2013 Escalade engines | 40048044 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith 10 Bolt Cover | View on Amazon |
| DANA Popular Fits: all 2013 Escalade engines | 10019412 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Popular Fits: all 2013 Escalade engines | 10019417 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| GM GENUINE Popular Fits: 6.0L V8 ELECTRIC/GAS | 84554713 | 🇺🇸 US 🇨🇦 CA | Fits 3.08 Ratio (GU4), 8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differentialor Except Hybrid Axle (AXN) | View on Amazon |
| AAM Fits: 6.2L V8 | 26018131 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Carrier Unit without gears | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 52117734 | 🇺🇸 US 🇨🇦 CA | Exc. Positraction Limited-Slip Rear Axle (G80)8.50/8.625 Ring Gear Saginaw - American Axle | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 22849885 | 🇺🇸 US 🇨🇦 CA | Hybrid Axle (AXN), 3.42 Rear Axle Ratio (GU6), Positraction Limited-Slip Rear Axle (G80), 9.50 Ring Gear Saginaw - American Axle7700 LBS Vacuum Power Brakes with Vses(JD9) | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 15801501 | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 22894020 | 🇺🇸 US 🇨🇦 CA | Cover Bolt Quantity: 10 | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | GM86L | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 30 Spline | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | GM86E | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearGM 8.625" (10 Bolt) | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | 14038087 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Gear Case1.37 in. Dia. | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA20098 | 🇺🇸 US | Open Differential (without Limited Slip) Carrier Case Includes Spider GearsLoaded Carrier | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | USA20086 | 🇺🇸 US | Carrier case | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | USA20131 | 🇺🇸 US | Carrier case | View on Amazon |
This table covers the carriers that hold the differential gears in the axle.
23 Differential Carrier parts for the 2013 Cadillac Escalade come from 7 brands — GM GENUINE, RICHMOND, USA STANDARD GEAR and 4 other brands. The "Popular" part is USA STANDARD GEAR USA26016. 14 parts fit every engine; the other 9 are engine-specific.
The Economy section: 6 options from RICHMOND and DORMAN. DORMAN 697909 is listed in this group.
Heavy Duty: 1 part, from USA STANDARD GEAR. A representative part number is USA STANDARD GEAR USA26016.
Standard Replacement: 16 parts, from GM GENUINE, AAM, MOTIVE GEAR and 2 other brands. A representative part number is AAM 40195444.
Differential Carrier Bearing / Race
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Popular Fits: all 2013 Escalade engines | WTA36 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith AAM Axle | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2013 Escalade engines | WTLM603012 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2013 Escalade engines | WTA42 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith AAM Axle | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | WTLM501314 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | WTLM501349 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontAWD | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: all 2013 Escalade engines | A36 | 🇺🇸 US 🇨🇦 CA | GoldSet | View on Amazon |
| ACDELCO Popular Fits: 6.2L V8 | LM501349 | 🇺🇸 US 🇨🇦 CA | Gold | View on Amazon |
| SKF Popular Fits: all 2013 Escalade engines | BR36 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith 8.50, 8.625 Ring Gear | View on Amazon |
| SKF Popular Fits: all 2013 Escalade engines | BR72 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Frontwith 8.25 Ring Gear | View on Amazon |
| TIMKEN Popular Fits: all 2013 Escalade engines | SET36 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tapered Roller Bearing | View on Amazon |
| TIMKEN Popular Fits: all 2013 Escalade engines | SET42 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing and Race Set | View on Amazon |
| ACDELCO Fits: all 2013 Escalade engines | S13 | 🇺🇸 US 🇨🇦 CA | GM Original EquipmentIncludes Cup & Cone | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NBA36 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Taper Bearing SetIncludes Cup and Cone | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NBA42 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Taper Bearing SetIncludes Cup and Cone | View on Amazon |
| BCA Fits: 6.2L V8 | NBLM501314 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| BCA Fits: 6.2L V8 | NBLM501349 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontAWD | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | S1380 | 🇺🇸 US 🇨🇦 CA | 45.24MM ID X 77.77MM OD X 20.3MM THK.8.5/8.625 Diameter | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | S1198 | 🇺🇸 US 🇨🇦 CA | Includes Cup and Cone | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | S1413 | 🇺🇸 US 🇨🇦 CA | Includes Cup and Cone | View on Amazon |
| NATIONAL Fits: all 2013 Escalade engines | JLM506849A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bore=2.165", Length=0.906", Radius=0.14" | View on Amazon |
| NSK Fits: all 2013 Escalade engines | TRB36 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit Contents: 1 Cup, 1 ConeBearing and Race Set | View on Amazon |
| RICHMOND Fits: all 2013 Escalade engines | 2900061 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing & Race Kit or Differential Bearing Kit | View on Amazon |
| SCHAEFFLER Fits: all 2013 Escalade engines | LM501314 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SCHAEFFLER Fits: all 2013 Escalade engines | KLM501349 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Only | View on Amazon |
| SCHAEFFLER Fits: all 2013 Escalade engines | LM603012 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SCHAEFFLER Fits: all 2013 Escalade engines | KT36 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Rearwith 8.625 In Ring Gear | View on Amazon |
| SCHAEFFLER Fits: all 2013 Escalade engines | KLM603049 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Only | View on Amazon |
| SCHAEFFLER Fits: all 2013 Escalade engines | KT42 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear9.75" Ring Gear | View on Amazon |
| SKF Fits: all 2013 Escalade engines | LM501314VP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SKF Fits: all 2013 Escalade engines | LM603012 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SKF Fits: all 2013 Escalade engines | LM603049VP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 1.7810 In. Bearing Inside Diameter | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA57010 | 🇺🇸 US | Includes Carrier Bearings, Races, Stackable Carrier Shims | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AAM Fits: all 2013 Escalade engines | 26041515 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 32x86x16mmLeft Side Inner Axle Bearing | View on Amazon |
This table covers the bearings and races that support the differential carrier.
33 Differential Carrier Bearing / Race parts for the 2013 Cadillac Escalade come from 12 brands — SCHAEFFLER, WJB / INMOTION PARTS, SKF and 9 other brands. The "Popular" part is WJB / INMOTION PARTS WTA36. Economy and Standard Replacement are all represented, and Standard Replacement alone accounts for 27 parts.
Differential Carrier Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 11561577 | 🇺🇸 US 🇨🇦 CA | AWDM12X1.75X95 | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 11519538 | 🇺🇸 US 🇨🇦 CA | AWDM12X1.75X45.8 | View on Amazon |
This table covers the Differential Carrier bolts.
GM GENUINE supplies both parts for the 2013 Cadillac Escalade.
Part numbers include GM GENUINE 11561577 and GM GENUINE 11519538.
Differential Carrier Bushing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 6.2L V8 | 523071 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit of 4 | View on Amazon |
| MOOG Popular Fits: all 2013 Escalade engines | RK643170 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right | View on Amazon |
| MOOG Popular Fits: all 2013 Escalade engines | RK643171 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left | View on Amazon |
| DELPHI Fits: all 2013 Escalade engines | TD2011W | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| DORMAN Fits: 6.2L V8 | 523268 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontAWD | View on Amazon |
| MEVOTECH Fits: all 2013 Escalade engines | GS504346 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Original Grade | View on Amazon |
| MEVOTECH Fits: all 2013 Escalade engines | MS504346 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Supreme | View on Amazon |
| MEVOTECH Fits: all 2013 Escalade engines | GS501358 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Original Grade | View on Amazon |
| MEVOTECH Fits: all 2013 Escalade engines | GS501359 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Original Grade | View on Amazon |
| MEVOTECH Fits: all 2013 Escalade engines | CMS501358 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Supreme | View on Amazon |
| MEVOTECH Fits: all 2013 Escalade engines | CMS501359 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Supreme | View on Amazon |
| MOOG Fits: all 2013 Escalade engines | K201736 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| SKP Fits: 6.2L V8 | SK523071 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits AWDFront Axle | View on Amazon |
| SKP Fits: 6.2L V8 | SKC4735 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front RightAWD | View on Amazon |
This table covers the Differential Carrier bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.
14 Differential Carrier Bushing parts for the 2013 Cadillac Escalade come from 5 brands — MEVOTECH, MOOG, DORMAN and 2 other brands. The "Popular" part is DORMAN 523071. 10 parts fit every engine; the other 4 are engine-specific.
Differential Carrier Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ULTRA-POWER Fits: all 2013 Escalade engines | 523071 | 🇺🇸 US 🇨🇦 CA | Fits Differential Carrier Bushing4WD/AWD | View on Amazon |
This table covers the seals at the Differential Carrier. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2013 Cadillac Escalade — ULTRA-POWER 523071.
Differential Carrier Shim
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTIVE GEAR Popular Fits: all 2013 Escalade engines | SS12 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Super shimsStackable Carrier Shim Kit | View on Amazon |
| MOTIVE GEAR Popular Fits: all 2013 Escalade engines | SS10 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Carrier Shim Kit | View on Amazon |
| RICHMOND Popular Fits: all 2013 Escalade engines | 3800061 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 15599629 | 🇺🇸 US 🇨🇦 CA | Positraction Limited-Slip Rear Axle (G80),9.50 Ring Gear Saginaw - American Axle.025mm Thick | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 12471330 | 🇺🇸 US 🇨🇦 CA | if Repl OEM Cast Iron Shim,Order with Diff Bearing Shim KitExcept 9.5 Light Duty Beam (AXN) | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 12471368 | 🇺🇸 US 🇨🇦 CA | Rear AxleExcept 9.5 Light Duty Beam (AXN) | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 12471362 | 🇺🇸 US 🇨🇦 CA | Rear AxleExcept 9.5 Light Duty Beam (AXN) | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 12471363 | 🇺🇸 US 🇨🇦 CA | Rear AxleExcept 9.5 Light Duty Beam (AXN) | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 12471364 | 🇺🇸 US 🇨🇦 CA | Rear AxleExcept 9.5 Light Duty Beam (AXN) | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | GM10MSK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Carrier Shim Kit or Differential Carrier and pinion shim Kit | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | GM95MSK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Carrier And Pinion Shim Kit | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | GM95SSK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Carrier Shim KitCarrier Shim Pack | View on Amazon |
| RICHMOND Fits: all 2013 Escalade engines | 3800071 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA55002 | 🇺🇸 US | Super Carrier Shim Kit | View on Amazon |
This table covers the Differential Carrier shims.
14 Differential Carrier Shim parts are listed for the 2013 Cadillac Escalade, from GM GENUINE, MOTIVE GEAR, RICHMOND and 1 other brand. MOTIVE GEAR SS12 carries the "Popular" badge. All of them fit every engine offered in the 2013 Escalade.
Differential Clutch Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA33352 | 🇺🇸 US | Trac Loc Guide | View on Amazon |
This table covers the Differential Clutch guides.
One part is listed for the 2013 Cadillac Escalade — USA STANDARD GEAR USA33352.
Differential Clutch Pack
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: all 2013 Escalade engines | 26045829 | 🇺🇸 US 🇨🇦 CA | Fits RightEATON EDS-29996 | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 12471404 | 🇺🇸 US 🇨🇦 CA | LeftExcept 9.5 Light Duty Beam (AXN) | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 12471408 | 🇺🇸 US 🇨🇦 CA | LeftEaton EDS-29566 | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA16041 | 🇺🇸 US | Yukon Dura GripCompatible with Dura Grip or Eaton Positractions, not Factory | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA16110 | 🇺🇸 US | Spider Gear | View on Amazon |
This table covers the clutch packs in a limited-slip or locking differential.
5 Differential Clutch Pack parts for the 2013 Cadillac Escalade come from 2 brands — GM GENUINE and USA STANDARD GEAR. The "Popular" part is GM GENUINE 26045829. Every part fits both the 6.0L V8 ELECTRIC/GAS and the 6.2L V8.
Part numbers include GM GENUINE 26045829, GM GENUINE 12471404 and GM GENUINE 12471408, among others listed above.
Differential Clutch Pack Clip
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: all 2013 Escalade engines | 15599623 | 🇺🇸 US 🇨🇦 CA | Differential Guide Clip | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 00462787 | 🇺🇸 US 🇨🇦 CA | Differential Guide Clip | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 12471533 | 🇺🇸 US 🇨🇦 CA | Width .51"Positraction Limited-Slip Rear Axle (G80),8.50/8.625 Ring Gear Saginaw - American Axle | View on Amazon |
This table covers the Differential Clutch Pack clips.
3 Differential Clutch Pack Clip parts for the 2013 Cadillac Escalade come from GM GENUINE. Every part fits both the 6.0L V8 ELECTRIC/GAS and the 6.2L V8.
This group includes GM GENUINE 15599623, GM GENUINE 00462787 and GM GENUINE 12471533.
Differential Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: all 2013 Escalade engines | 697727 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear8.5" Ring Gear | View on Amazon |
| USA STANDARD GEAR Popular Fits: all 2013 Escalade engines | USA32017 | 🇺🇸 US | Chrome | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 40027020 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith 10 Bolt Cover | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 40039162 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith 8.6 (In) Axle | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 74030007 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith 10 Bolt Cover | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 25824253 | 🇺🇸 US 🇨🇦 CA | RearCOVER ONLY | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA32030 | 🇺🇸 US | Polished Aluminum | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA29114 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Yukon HardcoreNodular Iron | View on Amazon |
This table covers the Differential covers.
8 Differential Cover parts are listed for the 2013 Cadillac Escalade, from USA STANDARD GEAR, AAM, DORMAN and 1 other brand. DORMAN 697727 carries the "Popular" badge. All of them fit every engine offered in the 2013 Escalade.
Listed part numbers: DORMAN 697727, USA STANDARD GEAR USA32017 and AAM 40027020, plus the other parts above.
Differential Cover Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: all 2013 Escalade engines | 11546347 | 🇺🇸 US 🇨🇦 CA | RearM8X1.25X11.6,19.2 Thread | View on Amazon |
| USA STANDARD GEAR Popular Fits: all 2013 Escalade engines | USA33572 | 🇺🇸 US | 22.5mm longMetric M8 x 1.25 thread | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 4000216910 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
| AAM Fits: 6.0L V8 ELECTRIC/GAS | 40002169 | 🇺🇸 US 🇨🇦 CA | Fits with 9.5 (In) Rear Axle | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 12471307 | 🇺🇸 US 🇨🇦 CA | RearM8X1.25X22.6,19.2THD | View on Amazon |
| GM GENUINE Fits: 6.0L V8 ELECTRIC/GAS | 11546348 | 🇺🇸 US 🇨🇦 CA | RearM8X1.25X26.6,23.2 Thread | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | USA33569 | 🇺🇸 US | FrontAWD | View on Amazon |
This table covers the Differential Cover bolts.
7 Differential Cover Bolt parts for the 2013 Cadillac Escalade come from 3 brands — GM GENUINE, USA STANDARD GEAR and AAM. The "Popular" part is GM GENUINE 11546347. 4 parts fit every engine; the other 3 are engine-specific.
Part numbers include GM GENUINE 11546347, USA STANDARD GEAR USA33572 and AAM 4000216910, among others listed above.
Differential Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 6.2L V8 | 926817 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontAWD | View on Amazon |
| FEL-PRO Popular Fits: all 2013 Escalade engines | RDS55387 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith 9.5 (In) Ring Gear | View on Amazon |
| FEL-PRO Popular Fits: all 2013 Escalade engines | RDS55040 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith 8.625 (In) Ring Gear | View on Amazon |
| GM GENUINE Popular Fits: all 2013 Escalade engines | 15860607 | 🇺🇸 US 🇨🇦 CA | RearSingle Use | View on Amazon |
| USA STANDARD GEAR Popular Fits: all 2013 Escalade engines | USA23020 | 🇺🇸 US | Differential Gasket | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 40018901 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 8.6 (In) Rear AxleAxle Housing Cover | View on Amazon |
| DORMAN Fits: 6.2L V8 | 926808 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front RightAWD | View on Amazon |
| ELRING Fits: all 2013 Escalade engines | 782050 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Number of Mounting Bores: 10 | View on Amazon |
| FEL-PRO Fits: all 2013 Escalade engines | RDS55486 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith 9.5 (In) Ring Gear | View on Amazon |
| FEL-PRO Fits: all 2013 Escalade engines | RDS55480 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearMolded Rubber | View on Amazon |
| FEL-PRO Fits: all 2013 Escalade engines | RDS55477 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Frontwith Independent Front Suspension | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 26063649 | 🇺🇸 US 🇨🇦 CA | Rear9.50 Ring Gear Saginaw - American Axle | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 15270969 | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
| MAHLE / CLEVITE Fits: all 2013 Escalade engines | P32873 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Axle Housing Cover GasketMolded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: all 2013 Escalade engines | P33285 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Axle Housing Cover GasketMolded Rubber | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | 3993593 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearGM 8.5"/8.625" (10 Bolt) | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | 5126 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearGM 9.5" | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | USA23030 | 🇺🇸 US | Differential Case Gasket | View on Amazon |
| VICTOR REINZ Fits: all 2013 Escalade engines | 711483400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Cork | View on Amazon |
| VICTOR REINZ Fits: all 2013 Escalade engines | 711485400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith 8.625 IN Ring Gear | View on Amazon |
| VICTOR REINZ Fits: all 2013 Escalade engines | 711485200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Frontwith 8.250 IN Ring Gear | View on Amazon |
This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
21 Differential Cover Gasket parts for the 2013 Cadillac Escalade come from 9 brands — FEL-PRO, GM GENUINE, VICTOR REINZ and 6 other brands. The "Popular" part is DORMAN 926817. 17 parts fit every engine; the other 4 are engine-specific.
Differential Cross Pin
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: all 2013 Escalade engines | 84565109 | 🇺🇸 US 🇨🇦 CA | 8.50/8.625 Ring Gear Saginaw - American Axle10 Bolt Differential | View on Amazon |
| GM GENUINE Popular Fits: all 2013 Escalade engines | 14012700 | 🇺🇸 US 🇨🇦 CA | Exc. Positraction Limited-Slip Rear Axle (G80)9.50 Ring Gear Saginaw - American Axle | View on Amazon |
| GM GENUINE Popular Fits: 6.2L V8 | 84526162 | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 40048063 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Frontwith 10 Bolt Cover | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | 14006401 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Pinion Shaft | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | 14012700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Pinion Shaft | View on Amazon |
| RICHMOND Fits: all 2013 Escalade engines | CSPGM85 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Pinion Shaft | View on Amazon |
| RICHMOND Fits: all 2013 Escalade engines | XL5640 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | EXCelDifferential Pinion Shaft | View on Amazon |
| RICHMOND Fits: all 2013 Escalade engines | 8002721 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Pinion Shaft | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | USA33401 | 🇺🇸 US | FrontAWD | View on Amazon |
This table covers the Differential Cross pins.
10 Differential Cross Pin parts are listed for the 2013 Cadillac Escalade, from GM GENUINE, RICHMOND, MOTIVE GEAR and 2 other brands. GM GENUINE 84565109 carries the "Popular" badge. 8 parts fit every engine; the other 2 are engine-specific.
Differential Crush Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| RICHMOND Popular Fits: all 2013 Escalade engines | 1900041 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearGM 8.25" IFS, 8.5"/8.625" | View on Amazon |
| USA STANDARD GEAR Popular Fits: all 2013 Escalade engines | USA33097 | 🇺🇸 US | RearRWD | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 400103551 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| DORMAN Fits: all 2013 Escalade engines | 81057 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Pinion Crush Sleeves | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | 14012691 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Crush Sleeve | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA55048 | 🇺🇸 US | RearRWD | View on Amazon |
This table covers the Differential Crush sleeves.
6 Differential Crush Sleeve parts are listed for the 2013 Cadillac Escalade, from USA STANDARD GEAR, RICHMOND, AAM and 2 other brands. RICHMOND 1900041 carries the "Popular" badge. All of them fit every engine offered in the 2013 Escalade.
Listed part numbers: RICHMOND 1900041, USA STANDARD GEAR USA33097 and AAM 400103551, plus the other parts above.
Differential Fill / Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AAM Fits: all 2013 Escalade engines | 40007601 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 8.6 (In) Rear Axle | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 55573646 | 🇺🇸 US 🇨🇦 CA | Includes O-Ring | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 92230583 | 🇺🇸 US 🇨🇦 CA | RearSquare Head with Washer with Magnet | View on Amazon |
This table covers the Differential Fill drain plugs.
3 Differential Fill / Drain Plug parts for the 2013 Cadillac Escalade come from 2 brands — GM GENUINE and AAM. Every part fits both the 6.0L V8 ELECTRIC/GAS and the 6.2L V8.
Listed part numbers: AAM 40007601, GM GENUINE 55573646 and GM GENUINE 92230583.
Differential Gear Installation Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTIVE GEAR Fits: all 2013 Escalade engines | GM95IKL | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Gear Install Kit | View on Amazon |
| MOTIVE GEAR Fits: 6.2L V8 | GM82IKFL | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Gear Install Kit | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA12059 | 🇺🇸 US | Minor Differential Install KitIncludes Pinion Seal, Crush Sleeve if Applicable, Complete Shim Kit with Super Shims, Marking Compound, Brush | View on Amazon |
This table covers the Differential Gear Installation kits.
3 Differential Gear Installation Kit parts are listed for the 2013 Cadillac Escalade, from MOTIVE GEAR and USA STANDARD GEAR. 2 parts fit every engine; the other 1 is engine-specific.
Listed part numbers: MOTIVE GEAR GM95IKL, MOTIVE GEAR GM82IKFL and USA STANDARD GEAR USA12059.
Differential Housing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AAM Fits: 6.2L V8 | 825HSGASMKIT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Escalade ESV or Escalade EXTwith 8.25 (In) Front Axle | View on Amazon |
| DORMAN Fits: 6.2L V8 | 600211 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontAWD | View on Amazon |
This table covers the Differential housings.
2 Differential Housing parts are listed for the 2013 Cadillac Escalade, from AAM and DORMAN.
Listed part numbers: AAM 825HSGASMKIT and DORMAN 600211.
Differential Housing Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Fits: 6.2L V8 | USA32271 | 🇺🇸 US | Differential Bearing Retainer Stud Kit | View on Amazon |
This table covers the Differential Housing bolts.
This group shows a single part: USA STANDARD GEAR USA32271.
Differential Lock Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: all 2013 Escalade engines | 12471530 | 🇺🇸 US 🇨🇦 CA | Includes Bracket | View on Amazon |
This table covers the Differential Lock actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
This group shows a single part: GM GENUINE 12471530.
Differential Lock Plate
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: all 2013 Escalade engines | 12471406 | 🇺🇸 US 🇨🇦 CA | Fits EATON EDS-890963.08 Ratio (GU4) | View on Amazon |
This table covers the Differential Lock plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts.
One part is listed for the 2013 Cadillac Escalade — GM GENUINE 12471406.
Differential Lock Thrust Block
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: all 2013 Escalade engines | 12471397 | 🇺🇸 US 🇨🇦 CA | Fits Orange3.08 Ratio (GU4) | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 12471395 | 🇺🇸 US 🇨🇦 CA | Fits Brown3.08 Ratio (GU4) | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 12471393 | 🇺🇸 US 🇨🇦 CA | Fits Purple3.08 Ratio (GU4) | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 12471394 | 🇺🇸 US 🇨🇦 CA | Fits WhitePositraction Limited-Slip Rear Axle (G80) | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 12471396 | 🇺🇸 US 🇨🇦 CA | Fits Yellow3.08 Ratio (GU4) | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 12471398 | 🇺🇸 US 🇨🇦 CA | Fits Pink3.08 Ratio (GU4) | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 12471399 | 🇺🇸 US 🇨🇦 CA | Fits Green3.08 Ratio (GU4) | View on Amazon |
This table covers the thrust blocks in a locking differential.
7 Differential Lock Thrust Block parts for the 2013 Cadillac Escalade come from GM GENUINE. The "Popular" part is GM GENUINE 12471397. Every part fits both the 6.0L V8 ELECTRIC/GAS and the 6.2L V8.
Part numbers include GM GENUINE 12471397, GM GENUINE 12471395 and GM GENUINE 12471393, among others listed above.
Differential Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 6.2L V8 | 523240 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bracket | View on Amazon |
| SKP Fits: all 2013 Escalade engines | SK4736 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left | View on Amazon |
| ULTRA-POWER Fits: all 2013 Escalade engines | 523240 | 🇺🇸 US 🇨🇦 CA | Front Right4WD/AWD | View on Amazon |
This table covers the Differential mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
3 Differential Mount parts are listed for the 2013 Cadillac Escalade, from DORMAN, SKP and ULTRA-POWER. 2 parts fit every engine; the other 1 is engine-specific.
Part numbers include DORMAN 523240 and SKP SK4736, among others listed above.
Differential Mount Bracket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 23104736 | 🇺🇸 US 🇨🇦 CA | Front LeftAWD | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 23104735 | 🇺🇸 US 🇨🇦 CA | Front RightAWD | View on Amazon |
| ULTRA-POWER Fits: all 2013 Escalade engines | RK643171 | 🇺🇸 US 🇨🇦 CA | Differential Support BracketFront Left | View on Amazon |
This table covers the brackets that mount the Differential Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners.
3 Differential Mount Bracket parts are listed for the 2013 Cadillac Escalade, from GM GENUINE and ULTRA-POWER. 1 part fits every engine; the other 2 are engine-specific.
This group includes GM GENUINE 23104736, GM GENUINE 23104735 and ULTRA-POWER RK643171.
Differential Pinion Bearing / Race
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Popular Fits: all 2013 Escalade engines | WTM88048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Shape: Cylindrical | View on Amazon |
| FAMOUS BRAND Fits: all 2013 Escalade engines | SHM88610 | 🇺🇸 US 🇨🇦 CA | RearOuter | View on Amazon |
| FAMOUS BRAND Fits: all 2013 Escalade engines | SM802011 | 🇺🇸 US 🇨🇦 CA | Fits FrontInner | View on Amazon |
| FAMOUS BRAND Fits: all 2013 Escalade engines | SM88010 | 🇺🇸 US 🇨🇦 CA | Fits FrontOuter | View on Amazon |
| FAMOUS BRAND Fits: all 2013 Escalade engines | SM802048 | 🇺🇸 US 🇨🇦 CA | Fits RearInner | View on Amazon |
| ULTRA-POWER Fits: all 2013 Escalade engines | WTM88048 | 🇺🇸 US 🇨🇦 CA | RearOUTER | View on Amazon |
| ULTRA-POWER Fits: all 2013 Escalade engines | WTM802048 | 🇺🇸 US 🇨🇦 CA | RearINNER | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2013 Escalade engines | WTHM88610 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Cup Outside Diameter (In): 2.8439999999999999 InRace | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2013 Escalade engines | WTM802011 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2013 Escalade engines | WTM88010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RaceCup Outside Diameter (In): 2.6880000000000002 In | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2013 Escalade engines | WTNP926068 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2013 Escalade engines | WTM802048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Shape: Cylindrical | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2013 Escalade engines | WTHM88649 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Outerwith AAM Axle | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2013 Escalade engines | WTHM804846 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Innerwith AAM Axle | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2013 Escalade engines | WTHM804810 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: all 2013 Escalade engines | HM88610 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RaceTaper Bearing Cup | View on Amazon |
| SKF Popular Fits: all 2013 Escalade engines | BR52 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Outerwith 8.25 Ring Gear | View on Amazon |
| TIMKEN Popular Fits: all 2013 Escalade engines | HM88610 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| TIMKEN Popular Fits: all 2013 Escalade engines | HM88649 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Cone | View on Amazon |
| TIMKEN Popular Fits: all 2013 Escalade engines | HM804846 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Inner9.5" Ring Gear | View on Amazon |
| TIMKEN Popular Fits: 6.2L V8 | M88048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front OuterAWD | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NBM88010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NBM802011 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NBHM88610 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NBM88048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Shape: Cylindrical | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NBM802048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Shape: Cylindrical | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NBHM88649 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Shape: Cylindrical | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NBBR52 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing & Race | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NBHM804810 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NBHM804846 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Innerwith AAM Axle(s) | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | S1382 | 🇺🇸 US 🇨🇦 CA | Contains 1 Cone AAM# 40048060 and 1 Cup AAM# 40048058 | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | S1420 | 🇺🇸 US 🇨🇦 CA | Front Inner11.50 Ring Gear American Axle | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | S604 | 🇺🇸 US 🇨🇦 CA | Includes Cup and Cone | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | S37 | 🇺🇸 US 🇨🇦 CA | Includes Cup and Cone1 7/8" Inner Diameter X 3-3/4" Outer Diameter X 1 3/16" Thick | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | S1381 | 🇺🇸 US 🇨🇦 CA | InnerExcept 9.5 Light Duty Beam (AXN) | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 09413427 | 🇺🇸 US 🇨🇦 CA | Front OuterAWD | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | 706016XR | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Koyo Bearings | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | R95GRLPK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | KitKoyo Bearings | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | R10RLAPK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | KitKoyo Bearings | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | R95GRLTPK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Pinion Bearing Kit Includes Timken Pinion Bearings, Brush, Crush Sleeve, Marking Compound, Pinion Nut, Pinion Seal, Pinion Shims, and Thread Locking Compound | View on Amazon |
| MOTIVE GEAR Fits: 6.2L V8 | R82RIFSLPK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | KitKoyo Bearings | View on Amazon |
| MOTIVE GEAR Fits: 6.2L V8 | R82RIFSLTPK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Pinion Bearing Kit Includes Timken Pinion Bearings, Brush, Crush Sleeve, Marking Compound, Pinion Nut, Pinion Seal, Pinion Shims, and Thread Locking Compound | View on Amazon |
| NATIONAL Fits: all 2013 Escalade engines | M88010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Taper Bearing Cup | View on Amazon |
| NATIONAL Fits: all 2013 Escalade engines | M802011 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Taper Bearing Cup | View on Amazon |
| NATIONAL Fits: all 2013 Escalade engines | HM804810 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| NATIONAL Fits: all 2013 Escalade engines | HM804846 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Innerwith 9.5 IN Ring Gear | View on Amazon |
| SCHAEFFLER Fits: all 2013 Escalade engines | HM88610 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SCHAEFFLER Fits: all 2013 Escalade engines | M88010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SCHAEFFLER Fits: all 2013 Escalade engines | M802011 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SCHAEFFLER Fits: all 2013 Escalade engines | KM802048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Front Inner8.25" Ring Gear | View on Amazon |
| SCHAEFFLER Fits: all 2013 Escalade engines | KM88048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Front Outerwith 8.25 In Ring Gear | View on Amazon |
| SCHAEFFLER Fits: all 2013 Escalade engines | KHM88649 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Outerwith 9.50 In Ring Gear | View on Amazon |
| SCHAEFFLER Fits: all 2013 Escalade engines | HM804810 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SCHAEFFLER Fits: all 2013 Escalade engines | KNP457992 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SCHAEFFLER Fits: all 2013 Escalade engines | KHM804846 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Innerwith 9.50 In Ring Gear | View on Amazon |
| SCHAEFFLER Fits: all 2013 Escalade engines | NP926068 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SKF Fits: all 2013 Escalade engines | M88010VP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SKF Fits: all 2013 Escalade engines | HM88610 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SKF Fits: all 2013 Escalade engines | NP926068 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SKF Fits: all 2013 Escalade engines | HM804810VP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| SKF Fits: all 2013 Escalade engines | BR3372 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Outerwith 8.50 Ring Gear | View on Amazon |
| SKF Fits: all 2013 Escalade engines | HM804846 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 1.8750 In. Bearing Inside Diameter | View on Amazon |
| SKF Fits: all 2013 Escalade engines | BR4195 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Innerwith 8.50 Ring Gear | View on Amazon |
| TIMKEN Fits: all 2013 Escalade engines | HM804810 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| TIMKEN Fits: 6.2L V8 | M88010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| TIMKEN Fits: 6.2L V8 | NP099285 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Race | View on Amazon |
| TIMKEN Fits: 6.2L V8 | NP544520 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front InnerAWD | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA13105 | 🇺🇸 US | Includes Timken Pinion Bearings | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | USA13067 | 🇺🇸 US | KitIncludes Timken Pinion Bearings | View on Amazon |
This table covers the bearings and races on the differential pinion.
69 Differential Pinion Bearing / Race parts are listed for the 2013 Cadillac Escalade, from SCHAEFFLER, WJB / INMOTION PARTS, BCA and 8 other brands. WJB / INMOTION PARTS WTM88048 carries the "Popular" badge. Grades run from Economy through Standard Replacement; Standard Replacement is the most populated section, led by SCHAEFFLER, BCA, SKF and 5 other brands.
Differential Pinion Bearing Baffle
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: all 2013 Escalade engines | 14012691 | 🇺🇸 US 🇨🇦 CA | Rear9.50 Ring Gear Saginaw - American Axle | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 12479162 | 🇺🇸 US 🇨🇦 CA | RearSingle Use | View on Amazon |
This table covers the baffles that control oil at the pinion bearings.
GM GENUINE supplies both parts for the 2013 Cadillac Escalade. All of them fit every engine offered in the 2013 Escalade.
This group includes GM GENUINE 14012691 and GM GENUINE 12479162.
Differential Pinion Flange
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AAM Fits: all 2013 Escalade engines | 40025925 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 8.25 (In) Front Axlewith 1344 U-Joint | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 26060881 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 14 Bolt Coverwith 9.5 (In) Rear Axle | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 40055350 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 8.6 (In) Rear Axlewith 1415 U-Joint | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 40177786 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 14 Bolt Coverwith 9.5 (In) Rear Axle | View on Amazon |
This table covers the flanges that connect the driveshaft to the differential pinion.
4 Differential Pinion Flange parts for the 2013 Cadillac Escalade come from AAM. Every part fits both the 6.0L V8 ELECTRIC/GAS and the 6.2L V8.
Listed part numbers: AAM 40025925, AAM 26060881 and AAM 40055350, plus the other parts above.
Differential Pinion Nut
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Popular Fits: all 2013 Escalade engines | USA33152 | 🇺🇸 US | Differential Pinion Shaft Nut | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 9783762 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits with 8.25 (In) Front Axl | View on Amazon |
| AAM Fits: 6.0L V8 ELECTRIC/GAS | 97837621 | 🇺🇸 US 🇨🇦 CA | Fits with 8.25 (In) Front AxleDrive Pinion Nutor with 8.6 (In) Rear Axle | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 09783762 | 🇺🇸 US 🇨🇦 CA | Fits FrontSingle Use | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 88891763 | 🇺🇸 US 🇨🇦 CA | Fits FrontM10 | View on Amazon |
| MOTIVE GEAR Fits: 6.2L V8 | 1260823 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Pinion Shaft NutPinion Nut | View on Amazon |
This table covers the Differential Pinion nuts.
6 Differential Pinion Nut parts for the 2013 Cadillac Escalade come from 4 brands — AAM, GM GENUINE, USA STANDARD GEAR and 1 other brand. The "Popular" part is USA STANDARD GEAR USA33152. 4 parts fit every engine; the other 2 are engine-specific.
Part numbers include USA STANDARD GEAR USA33152, AAM 9783762 and AAM 97837621, among others listed above.
Differential Pinion Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Popular Fits: 6.2L V8 | WS99193 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front OuterAWD | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 26060975 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Sleeve To adapt standard yoke To Use late model triple Lip pinion sealwith 14 Bolt Cover | View on Amazon |
| SKF Fits: all 2013 Escalade engines | 99193 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Shaft Diameter: 1.937 In | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA41150 | 🇺🇸 US | Drive Shaft Pinion Yoke | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2013 Escalade engines | WS99210 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Outerwith AAM Axle | View on Amazon |
This table covers the wear sleeves used to restore a grooved pinion seal surface.
5 Differential Pinion Repair Sleeve parts for the 2013 Cadillac Escalade come from 4 brands — WJB / INMOTION PARTS, AAM, SKF and 1 other brand. The "Popular" part is WJB / INMOTION PARTS WS99193. 4 parts fit every engine; the other 1 is engine-specific.
Part numbers include WJB / INMOTION PARTS WS99193, AAM 26060975 and SKF 99193, among others listed above.
Differential Pinion Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: all 2013 Escalade engines | 710536 | 🇺🇸 US 🇨🇦 CA | Gold | View on Amazon |
| GM GENUINE Popular Fits: 6.2L V8 | 12471590 | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
| NATIONAL Popular Fits: all 2013 Escalade engines | 710506 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Outerwith 8.625 IN Ring Gear | View on Amazon |
| NATIONAL Popular Fits: 6.2L V8 | 710536 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front OuterAWD | View on Amazon |
| WJB / INMOTION PARTS Popular Fits: all 2013 Escalade engines | WS710506 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Outerwith AAM Axle | View on Amazon |
| ACDELCO Fits: all 2013 Escalade engines | 710506 | 🇺🇸 US 🇨🇦 CA | Gold | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NS710506 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Rear Outerwith AAM Axle | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NS710536 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Outerwith AAM Axle | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NS710507 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Outerwith AAM Axle | View on Amazon |
| DORMAN Fits: 6.2L V8 | 697151 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontAWD | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 26064029 | 🇺🇸 US 🇨🇦 CA | Fits Order with 888917639.50 Ring Gear Saginaw - American Axl | View on Amazon |
| MOTIVE GEAR Fits: 6.2L V8 | 26064029 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearAWD | View on Amazon |
| MOTIVE GEAR Fits: 6.2L V8 | 8610 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits FrontAWD | View on Amazon |
| SCHAEFFLER Fits: all 2013 Escalade engines | SS3085 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearViton Type | View on Amazon |
| SCHAEFFLER Fits: 6.2L V8 | SS2994 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontAWD | View on Amazon |
| SKF Fits: all 2013 Escalade engines | 19428 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Frontwith 8.25 Ring Gear | View on Amazon |
| SKF Fits: all 2013 Escalade engines | 20880 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Rearwith 8.5 Ring Gear | View on Amazon |
| TIMKEN Fits: all 2013 Escalade engines | 710536 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1.969 in. Shaft Size2.908 in. Bore | View on Amazon |
| TIMKEN Fits: 6.2L V8 | 710507 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearAWD | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA30163 | 🇺🇸 US | Yukon Mighty Seal | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2013 Escalade engines | WS710507 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Outerwith AAM Axle | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | WS710536 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front OuterAWD | View on Amazon |
This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
22 Differential Pinion Seal parts for the 2013 Cadillac Escalade come from 11 brands — WJB / INMOTION PARTS, BCA, ACDELCO and 8 other brands. The "Popular" part is ACDELCO 710536. 14 parts fit every engine; the other 8 are engine-specific.
Differential Pinion Shaft Lock Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: all 2013 Escalade engines | 81048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Shaft Lock Bolt | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 14012702 | 🇺🇸 US 🇨🇦 CA | Includes 10 Lock Screws | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 25872305 | 🇺🇸 US 🇨🇦 CA | SINGLE USE.3X18X30, 12.7THD | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | 12337979 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearChrysler 9.25", GM 9.25", 9.5" | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA33067 | 🇺🇸 US | Differential Cross Pin Bolt | View on Amazon |
This table covers the Differential Pinion Shaft Lock bolts.
5 Differential Pinion Shaft Lock Bolt parts are listed for the 2013 Cadillac Escalade, from GM GENUINE, DORMAN, MOTIVE GEAR and 1 other brand. DORMAN 81048 carries the "Popular" badge. All of them fit every engine offered in the 2013 Escalade.
Part numbers include DORMAN 81048, GM GENUINE 14012702 and GM GENUINE 25872305, among others listed above.
Differential Pinion Shim
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTIVE GEAR Popular Fits: all 2013 Escalade engines | 1102 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Pinion Shim Pack849 Housing | View on Amazon |
| USA STANDARD GEAR Popular Fits: all 2013 Escalade engines | USA55009 | 🇺🇸 US | Rear DifferentialRWD | View on Amazon |
| EATON Fits: all 2013 Escalade engines | EAT3664 | 🇺🇸 US 🇨🇦 CA | .015" positraction shim. | View on Amazon |
| EATON Fits: all 2013 Escalade engines | EAT3667 | 🇺🇸 US 🇨🇦 CA | .030" positraction shim. | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 26043991 | 🇺🇸 US 🇨🇦 CA | Except 9.5 Light Duty Beam (AXN).040-.044 THK | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | 1100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Pinion Shim Pack | View on Amazon |
| RICHMOND Fits: all 2013 Escalade engines | 1600901 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear DifferentialGM 8.5/8.625" | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA16042 | 🇺🇸 US | Dura Grip Posi Shim Kit | View on Amazon |
This table covers the Differential Pinion shims.
8 Differential Pinion Shim parts for the 2013 Cadillac Escalade come from 5 brands — MOTIVE GEAR, USA STANDARD GEAR, EATON and 2 other brands. The "Popular" part is MOTIVE GEAR 1102. Every part fits both the 6.0L V8 ELECTRIC/GAS and the 6.2L V8.
This group includes MOTIVE GEAR 1102, USA STANDARD GEAR USA55009 and EATON EAT3664 and the remaining parts above.
Differential Rebuild Kit
Master Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| RICHMOND Popular Fits: all 2013 Escalade engines | XL10271 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | EXCel | View on Amazon |
| RICHMOND Popular Fits: all 2013 Escalade engines | XL10671 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | EXCel | View on Amazon |
| RICHMOND Popular Fits: 6.2L V8 | XL10231 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | EXCel | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NBDRK321JMK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Master Kit | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NBRA321TMK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Master Kit | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NBDRK321QMK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Master Kit | View on Amazon |
| DORMAN Fits: all 2013 Escalade engines | 697036 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front8.5" Ring Gear | View on Amazon |
| DORMAN Fits: all 2013 Escalade engines | 697035 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear8.5" or 8.625" Ring Gear | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | R10RLAMK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Master Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | R10RLAMKT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Master Bearing Kit Includes Timken Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | R95GRLMK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Master Bearing Kit Includes Koyo Tapered Bearings , Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear BoltMaster Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts | View on Amazon |
| MOTIVE GEAR Fits: 6.2L V8 | R82RIFSLMK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Master Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Ring Gear Bolts | View on Amazon |
| MOTIVE GEAR Fits: 6.2L V8 | R82RIFSLMKT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Master Bearing Kit Includes Timken Tapered Bearings , Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), RI | View on Amazon |
| SKF Fits: all 2013 Escalade engines | SDK321JMK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Master Kit | View on Amazon |
| SKF Fits: all 2013 Escalade engines | SDK321QMK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Master Kit | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | ZKGM86B | 🇺🇸 US | Master Overhaul KitIncludes Koyo Bearings | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA14168 | 🇺🇸 US | Yukon Master Kit | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | ZKGM825IFSB | 🇺🇸 US | Differential Rebuild KitsIncludes Koyo Bearings, Stub Axle Bearings and Seals | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | ZKGM825IFSC | 🇺🇸 US 🇨🇦 CA | Differential Rebuild KitsIncludes Koyo Bearings, stub axle bearings seals, Case Gasket & extension Tube Gasket | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | USA14084 | 🇺🇸 US | Yukon Differential Master KitIncludes Timken Bearings, Stub Axle Bearings and Seals | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | USA14237 | 🇺🇸 US | Yukon Differential Master KitIncludes stub axle bearings seals, Case Gasket & extension Tube Gasket | View on Amazon |
Standard Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTIVE GEAR Popular Fits: all 2013 Escalade engines | R10RLA | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking | View on Amazon |
| MOTIVE GEAR Popular Fits: all 2013 Escalade engines | R10RLAT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Kit Includes Timken Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound | View on Amazon |
| NATIONAL Popular Fits: all 2013 Escalade engines | RA324B | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith 9.5 IN Ring Gear | View on Amazon |
| TIMKEN Popular Fits: all 2013 Escalade engines | DRK321Q | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear8.5", 8.625" Ring Gear | View on Amazon |
| TIMKEN Popular Fits: 6.2L V8 | DRK321T | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Standard Kit | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 74067005 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 14 Bolt Coverwith 9.5 (In) Rear Axle | View on Amazon |
| AAM Fits: 6.2L V8 | 74067016 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Escalade EXTwith 8.5 (In) Rear Axle | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NBDRK321J | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Standard Kit | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NBRA321T | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Standard Kit | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NBDRK321Q | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Standard Kit | View on Amazon |
| DANA Fits: all 2013 Escalade engines | 10038958 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SpicerStandard Kit | View on Amazon |
| LUK Fits: all 2013 Escalade engines | GDK321Q | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Standard Kit | View on Amazon |
| LUK Fits: all 2013 Escalade engines | GDK321J | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Standard Kit | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | R95GRL | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | R95GRLT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Kit Includes Timken Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound | View on Amazon |
| MOTIVE GEAR Fits: 6.2L V8 | R82RIFSL | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Kit Includes Koyo Tapered Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seal (Axle, Pinion), and Thread L | View on Amazon |
| MOTIVE GEAR Fits: 6.2L V8 | R82RIFSLT | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bearing Kit Includes Timken Tapered Bearings , Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seal (Axle, Pinion), and Thread | View on Amazon |
| SKF Fits: all 2013 Escalade engines | SDK321J | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Standard Kit | View on Amazon |
| SKF Fits: all 2013 Escalade engines | SDK321Q | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Standard Kit | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | ZBKGM86B | 🇺🇸 US | Standard KitsIncludes Koyo Bearings, Pinion Bearings, Carrier Bearings, Crush Sleeve, Pinion Seal | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA11105 | 🇺🇸 US | Standard KitTimken Bearings | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | ZBKGM825IFSB | 🇺🇸 US | Standard KitsIncludes Koyo Bearings, Pinion Bearings, Carrier Bearings, Crush Sleeve, Pinion Seal | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | USA11104 | 🇺🇸 US | Standard KitTimken Bearings | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2013 Escalade engines | WKRA324B | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith AAM Axle | View on Amazon |
Super Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Fits: all 2013 Escalade engines | ZGK2031 | 🇺🇸 US | Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 3.42 Ratio Gear Set | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | ZGK2032 | 🇺🇸 US | Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 3.73 Ratio Gear Set | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | ZGK2026 | 🇺🇸 US | Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 3.42 Ratio Gear Set | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | ZGK2027 | 🇺🇸 US | Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 3.73 Ratio Gear Set | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | ZGK2033 | 🇺🇸 US | Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 4.11 Ratio Gear Set | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | ZGK2034 | 🇺🇸 US | Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 4.56 Ratio Gear Set | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | ZGK2029 | 🇺🇸 US | Gear and Install Kit PackageIncludes Ring & pinion, Koyo Bearings, 4.56 Ratio Gear Set | View on Amazon |
This table covers kits that group the bearings, races and seals for a differential rebuild.
52 Differential Rebuild Kit parts are listed for the 2013 Cadillac Escalade, from USA STANDARD GEAR, MOTIVE GEAR, BCA and 9 other brands. RICHMOND XL10271 carries the "Popular" badge. Master Kit, Standard Kit and Super Kit are all represented, and Standard Kit alone accounts for 24 parts.
Differential Ring and Pinion
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular Fits: all 2013 Escalade engines | 2023695 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SVL | View on Amazon |
| DANA Popular Fits: all 2013 Escalade engines | 2020642 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SVL | View on Amazon |
| DORMAN Popular Fits: all 2013 Escalade engines | 697301 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear8.625" Ring Gear | View on Amazon |
| DORMAN Popular Fits: all 2013 Escalade engines | 697303 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear8.625" Ring Gear | View on Amazon |
| RICHMOND Popular Fits: all 2013 Escalade engines | GM85 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | EXCel | View on Amazon |
| RICHMOND Popular Fits: 6.2L V8 | GM825 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | EXCel | View on Amazon |
| DANA Fits: all 2013 Escalade engines | 2023698 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SVL | View on Amazon |
| DANA Fits: all 2013 Escalade engines | 2023704 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SVL | View on Amazon |
| DANA Fits: all 2013 Escalade engines | 2020954 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SVL | View on Amazon |
| DORMAN Fits: all 2013 Escalade engines | 697359 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front8.25" Ring Gear | View on Amazon |
| DORMAN Fits: all 2013 Escalade engines | 697360 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front8.25" Ring Gear | View on Amazon |
| DORMAN Fits: all 2013 Escalade engines | 697361 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front8.25" Ring Gear | View on Amazon |
| DORMAN Fits: all 2013 Escalade engines | 697812 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear8.625" Ring Gear | View on Amazon |
| DORMAN Fits: all 2013 Escalade engines | 697810 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear8.625" Ring Gear | View on Amazon |
| DORMAN Fits: all 2013 Escalade engines | 697300 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear8.625" Ring Gear | View on Amazon |
| DORMAN Fits: all 2013 Escalade engines | 697358 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front8.25" Ring Gear | View on Amazon |
| DORMAN Fits: all 2013 Escalade engines | 697808 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front8.25" Ring Gear | View on Amazon |
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTIVE GEAR Fits: all 2013 Escalade engines | G885 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Motive Gear Performance | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | G885IFS | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Performance | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| RICHMOND Popular Fits: all 2013 Escalade engines | 4900171 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearGM 8.5"/8.625" (10 Bolt) | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 26066706 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 3.73 Axle Ratiowith 8.6 (In) Rear Axle | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 40053031 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 4.10 Axle Ratiowith 8.6 (In) Rear Axle | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 40053802 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 4.56 Axle Ratiowith 8.6 (In) Rear Axle | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 40053029 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 3.42 Axle Ratiowith 8.6 (In) Rear Axle | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 40173817 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 3.42 Axle Ratiowith 14 Bolt Cover | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 40127810 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 3.08 Axle Ratiowith 8.6 (In) Rear Axle | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 40108742 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 3.23 Axle Ratiowith 8.6 (In) Rear Axle | View on Amazon |
| AAM Fits: 6.2L V8 | 40093540 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Escalade ESV or Escalade EXTwith 3.73 Axle Ratio | View on Amazon |
| AAM Fits: 6.2L V8 | 40093541 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Escalade ESV or Escalade EXTwith 3.42 Axle Ratio | View on Amazon |
| AAM Fits: 6.2L V8 | 40093539 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Escalade ESV or Escalade EXTwith 3.08 Axle Ratio | View on Amazon |
| AAM Fits: 6.2L V8 | 40125343 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Escalade ESV or Escalade EXTwith 3.23 Axle Ratio | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 19540813 | 🇺🇸 US 🇨🇦 CA | Except 9.5 Light Duty Beam (AXN)3.42 Rear Axle Ratio (GU6), 8.50/8.625 Ring Gear Saginaw - American Axle | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | GM85342 | 🇺🇸 US 🇨🇦 CA | OEM3.42 ratio | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | GM85373 | 🇺🇸 US 🇨🇦 CA | OEM3.73 ratio | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | GM85456 | 🇺🇸 US 🇨🇦 CA | OEM4.56 ratio | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | GM825373 | 🇺🇸 US 🇨🇦 CA | OEM3.73 ratio | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 23114024 | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | GM10A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | A-Line Ring and Pinion | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | GM10 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits RearGM 8.625 Differential | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | GM95 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearGM 9.5" (14 Bolt) | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | GM10IFS | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front8.25" Ring Gear | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | ZGGM85 | 🇺🇸 US 🇨🇦 CA | Ring Gear Diam: 8.5"Differential Cover Bolts: 10 | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | ZGGM825R | 🇺🇸 US 🇨🇦 CA | Ring Gear Diameter: 8.25"Dropout-Type (No cover bolts) | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: all 2013 Escalade engines | 19541990 | 🇺🇸 US 🇨🇦 CA | Except 9.5 Light Duty Beam (AXN)3.73 Rear Axle Ratio (GT4), 8.50/8.625 Ring Gear Saginaw - American Axle | View on Amazon |
This table covers the ring-and-pinion gear sets that set the axle ratio.
44 Differential Ring and Pinion parts for the 2013 Cadillac Escalade come from 7 brands — AAM, DORMAN, GM GENUINE and 4 other brands. The "Popular" part is DANA 2023695. Economy, High Performance and Standard Replacement are all represented, and Standard Replacement alone accounts for 24 parts.
Differential Ring Gear Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: all 2013 Escalade engines | 11610549 | 🇺🇸 US 🇨🇦 CA | Rear7/16-20 | View on Amazon |
| USA STANDARD GEAR Popular Fits: all 2013 Escalade engines | USA33049 | 🇺🇸 US 🇨🇦 CA | Rear DifferentialRWD | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 40061033 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 7/16" x 20 x .88" - Left Hand 6 PT Serrated Hex with Adhesivewith 8.6 (In) Rear Axle | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 14012703 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Thread Diameter: 12 MM | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | 14012703 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Ring Gear Bolt | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | 14066913 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Ring Gear Bolt | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | PB1792L | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear DifferentialGM 8.5"/8.625" | View on Amazon |
This table covers the Differential Ring Gear bolts.
7 Differential Ring Gear Bolt parts for the 2013 Cadillac Escalade come from 4 brands — MOTIVE GEAR, AAM, GM GENUINE and 1 other brand. The "Popular" part is GM GENUINE 11610549. Every part fits both the 6.0L V8 ELECTRIC/GAS and the 6.2L V8.
Part numbers include GM GENUINE 11610549, USA STANDARD GEAR USA33049 and AAM 40061033, among others listed above.
Differential Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 6.2L V8 | 600606 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Front Right InnerAWD | View on Amazon |
| SKP Popular Fits: 6.2L V8 | SK600606 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Front Right InnerAWD | View on Amazon |
| ELRING Fits: all 2013 Escalade engines | 782390 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits InletCenter | View on Amazon |
| ELRING Fits: all 2013 Escalade engines | B07650 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearRWD | View on Amazon |
| ELRING Fits: all 2013 Escalade engines | B16730 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: ACM (Polyacrylate) | View on Amazon |
| ELRING Fits: all 2013 Escalade engines | B17030 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: FPM (fluoride rubber)Radial Shaft Seal Design: BS2 | View on Amazon |
| ELRING Fits: 6.2L V8 | B16770 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: FPM (fluoride rubber)Outer Diameter [MM]: 73 | View on Amazon |
This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
7 Differential Seal parts are listed for the 2013 Cadillac Escalade, from ELRING, DORMAN and SKP. DORMAN 600606 carries the "Popular" badge. 4 parts fit every engine; the other 3 are engine-specific.
Part numbers include DORMAN 600606, SKP SK600606 and ELRING 782390, among others listed above.
Differential Spider Gear
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| RICHMOND Popular Fits: all 2013 Escalade engines | XL4056 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ExcelDifferential Carrier Gear Kit | View on Amazon |
| RICHMOND Popular Fits: all 2013 Escalade engines | XL4060 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ExcelDifferential Carrier Gear Kit | View on Amazon |
| RICHMOND Popular Fits: 6.2L V8 | XL4046 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ExcelDifferential Carrier Gear Kit | View on Amazon |
| DANA Fits: all 2013 Escalade engines | 2023879 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SVLCarrier Gear Kit | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Popular Fits: all 2013 Escalade engines | ZIKGM86S30V2 | 🇺🇸 US | Spider Gear or Carrier Gear Kit or Spider Gear SetCast | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 74045936 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Spider and Pinion Gear Kit | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 74040887 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Spider and Pinion Gear Kit | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 85662574 | 🇺🇸 US 🇨🇦 CA | Carrier Gear KitProgramming Required: YES | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 19178111 | 🇺🇸 US 🇨🇦 CA | Carrier Gear Kit | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 84526163 | 🇺🇸 US 🇨🇦 CA | Carrier Gear Kit | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | GM86BIL1 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Carrier Gear Kit30 Spline | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | GM95BI | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Carrier Gear Kit33 Spline | View on Amazon |
| MOTIVE GEAR Fits: 6.2L V8 | GM825BI | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Carrier Gear Kit28 Spline | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | ZIKGM86S30V3 | 🇺🇸 US | Spider Gear or Carrier Gear Kit or Spider Gear Set | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA16146 | 🇺🇸 US | Spider Gear or Carrier Gear Kit or Spider Gear SetForged | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | ZIKGM825IFSS | 🇺🇸 US | Spider Gear or Carrier Gear Kit or Spider Gear Set | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | USA16124 | 🇺🇸 US | Spider Gear or Carrier Gear Kit or Spider Gear SetForged | View on Amazon |
This table covers the Differential Spider gears.
17 Differential Spider Gear parts for the 2013 Cadillac Escalade come from 6 brands — USA STANDARD GEAR, RICHMOND, GM GENUINE and 3 other brands. The "Popular" part is RICHMOND XL4056. 12 parts fit every engine; the other 5 are engine-specific.
The Economy section: 4 options from RICHMOND and DANA. RICHMOND XL4056 is listed in this group.
Standard Replacement: 13 parts, from USA STANDARD GEAR, GM GENUINE, MOTIVE GEAR and 1 other brand. A representative part number is USA STANDARD GEAR ZIKGM86S30V2.
Differential Spool
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Fits: all 2013 Escalade engines | 10015388 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DANA Fits: all 2013 Escalade engines | 10015373 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | FS1030 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 30 SplineFull Spool | View on Amazon |
| RICHMOND Fits: all 2013 Escalade engines | XL5241 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Excel30 Spline | View on Amazon |
This table covers the spools that lock the differential side gears together.
4 Differential Spool parts are listed for the 2013 Cadillac Escalade, from DANA, MOTIVE GEAR and RICHMOND. All of them fit every engine offered in the 2013 Escalade.
This group includes DANA 10015388, DANA 10015373 and MOTIVE GEAR FS1030 and the remaining parts above.
Differential Washer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTIVE GEAR Popular Fits: all 2013 Escalade engines | 3984818 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Differential Pinion Gear Thrust Washer | View on Amazon |
| USA STANDARD GEAR Popular Fits: all 2013 Escalade engines | USA33167 | 🇺🇸 US | Pinion Gear Washer | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 14039026 | 🇺🇸 US 🇨🇦 CA | Positraction Limited-Slip Rear Axle (G80),9.50 Ring Gear Saginaw - American AxleDome Style | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 00462786 | 🇺🇸 US 🇨🇦 CA | Positraction Limited-Slip Rear Axle (G80),9.50 Ring Gear Saginaw - American AxleGM Part Number Stamped On Differential Flange | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | RGB4LW | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | GM 8.5" or 8.625"Lock Washer | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA33386 | 🇺🇸 US | Side gear thrust washer | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | USA33377 | 🇺🇸 US | Pinion gear Thrust Washer | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | USA33378 | 🇺🇸 US | Side gear thrust washer | View on Amazon |
This table covers the Differential washers.
8 Differential Washer parts for the 2013 Cadillac Escalade come from 3 brands — USA STANDARD GEAR, MOTIVE GEAR and GM GENUINE. The "Popular" part is MOTIVE GEAR 3984818. 6 parts fit every engine; the other 2 are engine-specific.
Listed part numbers: MOTIVE GEAR 3984818, USA STANDARD GEAR USA33167 and GM GENUINE 14039026, plus the other parts above.
Drive Shaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TOP NOTCH Popular Fits: all 2013 Escalade engines | TN1710PS | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front4WD | View on Amazon |
| TOP NOTCH Popular Fits: 6.2L V8 | TN1712PS | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontAWD | View on Amazon |
| ULTRA-POWER Popular Fits: 6.2L V8 | 938075 | 🇺🇸 US 🇨🇦 CA | 35" Long | View on Amazon |
| CARDONE Fits: all 2013 Escalade engines | 651018 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Frontwith 36.26 (In) Long Driveshaft | View on Amazon |
| CARDONE Fits: all 2013 Escalade engines | 651025 | 🇺🇸 US | RearRWD | View on Amazon |
| CARDONE Fits: 6.2L V8 | 651052 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearAWD | View on Amazon |
| CARDONE Fits: 6.2L V8 | 651030 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearAWD | View on Amazon |
| CARDONE Fits: 6.2L V8 | 651016 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits FrontAWD | View on Amazon |
| DORMAN Fits: 6.0L V8 ELECTRIC/GAS | 938220 | 🇺🇸 US 🇨🇦 CA | Length: 36.25" | View on Amazon |
| DORMAN Fits: 6.2L V8 | 938075 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Length: 35" | View on Amazon |
| DORMAN Fits: 6.2L V8 | 946004 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Length: 61.5" | View on Amazon |
| DORMAN Fits: 6.2L V8 | 986152 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Length: 47.5" | View on Amazon |
| SKP Fits: 6.0L V8 ELECTRIC/GAS | SK938220 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| TRAKMOTIVE Fits: 6.2L V8 | GMP425 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontAWD | View on Amazon |
This table covers the driveshafts that carry torque from the transmission or transfer case.
14 Drive Shaft parts are listed for the 2013 Cadillac Escalade, from CARDONE, DORMAN, TOP NOTCH and 3 other brands. TOP NOTCH TN1710PS carries the "Popular" badge. 3 parts fit every engine; the other 11 are engine-specific.
Drive Shaft Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: all 2013 Escalade engines | 11548472 | 🇺🇸 US 🇨🇦 CA | RearM5/16-24X1.3 | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 26036835 | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
This table covers the Drive Shaft bolts.
2 Drive Shaft Bolt parts for the 2013 Cadillac Escalade come from GM GENUINE. 1 part fits every engine; the other 1 is engine-specific.
Part numbers include GM GENUINE 11548472 and GM GENUINE 26036835.
Drive Shaft Center Support Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: all 2013 Escalade engines | 6092 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Centerwith Studs in Bracket | View on Amazon |
| DANA Fits: all 2013 Escalade engines | 25141680X | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer Select | View on Amazon |
| PIONEER Fits: all 2013 Escalade engines | 646092 | 🇺🇸 US 🇨🇦 CA | RWD1.5748" Bearing I.D. | View on Amazon |
This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
3 Drive Shaft Center Support Bearing parts are listed for the 2013 Cadillac Escalade, from ANCHOR, DANA and PIONEER. All of them fit every engine offered in the 2013 Escalade.
Listed part numbers: ANCHOR 6092, DANA 25141680X and PIONEER 646092.
Drive Shaft CV Joint Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 15270970 | 🇺🇸 US 🇨🇦 CA | AWD | View on Amazon |
This table covers the gaskets that seal the Drive Shaft CV Joint. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2013 Cadillac Escalade — GM GENUINE 15270970.
Drive Shaft End Yoke
Strap Style (Easier to Install)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 6.2L V8 | 88967027 | 🇺🇸 US 🇨🇦 CA | Includes Deflector | View on Amazon |
| DORMAN Fits: all 2013 Escalade engines | 697155 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Differential9.5" Ring Gear | View on Amazon |
| DORMAN Fits: 6.2L V8 | 697549 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear DifferentialEscalade ESV or Escalade EXT | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA41092 | 🇺🇸 US | Drive Shaft Pinion Yoke | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA41071 | 🇺🇸 US | Drive Shaft Pinion Yoke | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | USA41078 | 🇺🇸 US | Drive Shaft Pinion YokeStrap Style | View on Amazon |
U-Bolt Style (Stronger)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular Fits: all 2013 Escalade engines | 10025466 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer | View on Amazon |
| DORMAN Fits: 6.2L V8 | 697699 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front DifferentialAWD | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA41093 | 🇺🇸 US | Drive Shaft Pinion Yoke | View on Amazon |
This table covers the Drive Shaft End yokes.
9 Drive Shaft End Yoke parts for the 2013 Cadillac Escalade come from 4 brands — USA STANDARD GEAR, DORMAN, GM GENUINE and 1 other brand. The "Popular" part is GM GENUINE 88967027. 5 parts fit every engine; the other 4 are engine-specific.
In the Strap Style (Easier to Install) grade, USA STANDARD GEAR, DORMAN and GM GENUINE supply 6 parts: grouped under the catalog's "Strap Style (Easier to Install)" designation — the notes column spells out what sets them apart. A representative part number is GM GENUINE 88967027.
In the U-Bolt Style (Stronger) grade, DANA, DORMAN and USA STANDARD GEAR supply 3 parts: grouped under the catalog's "U-Bolt Style (Stronger)" designation — the notes column spells out what sets them apart. A representative part number is DANA 10025466.
Listed part numbers: GM GENUINE 88967027, DORMAN 697155 and DORMAN 697549, plus the other parts above.
Drive Shaft Retainer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: all 2013 Escalade engines | 23107857 | 🇺🇸 US 🇨🇦 CA | For Vehicles with 30MM U-Joint Bearing Cups | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 23107858 | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
This table covers the Drive Shaft retainers.
GM GENUINE supplies both parts for the 2013 Cadillac Escalade. 1 part fits every engine; the other 1 is engine-specific.
Listed part numbers: GM GENUINE 23107857 and GM GENUINE 23107858.
Drive Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: all 2013 Escalade engines | B16870 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: FPM (fluoride rubber)Swirl Type: Left-hand Twist | View on Amazon |
This table covers the seals at the Drive Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: ELRING B16870.
Drive Shaft Slip Yoke
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AAM Popular Fits: 6.2L V8 | 40021420 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Rear Driveshaft At Transfer CaseAWD | View on Amazon |
| DORMAN Popular Fits: 6.2L V8 | 697560 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | U Joint Bearing Cap Diameter: 1.19 IN | View on Amazon |
| AAM Fits: 6.2L V8 | 40006885 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Driveshaft At Transfer CaseAWD | View on Amazon |
| DORMAN Fits: 6.2L V8 | 697518 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Driveshaft at Transfer CaseAWD | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 12471638 | 🇺🇸 US 🇨🇦 CA | Front Driveshaft at Transfer CaseAWD | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 22944359 | 🇺🇸 US 🇨🇦 CA | FrontRWD | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 23251196 | 🇺🇸 US 🇨🇦 CA | Distance Between Retaining Rings 3.612" | View on Amazon |
| SKP Fits: 6.0L V8 ELECTRIC/GAS | SK697518 | 🇺🇸 US 🇨🇦 CA | Front Driveshaft at Transfer CaseAWD | View on Amazon |
This table covers the Drive Shaft Slip yokes.
8 Drive Shaft Slip Yoke parts are listed for the 2013 Cadillac Escalade, from GM GENUINE, AAM, DORMAN and 1 other brand. AAM 40021420 carries the "Popular" badge.
Listed part numbers: AAM 40021420, DORMAN 697560 and AAM 40006885, plus the other parts above.
Drive Shaft Slip Yoke Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: all 2013 Escalade engines | 24233898 | 🇺🇸 US 🇨🇦 CA | RWD4 speed Automatic trans. | View on Amazon |
This table covers the seals at the Drive Shaft Slip Yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: GM GENUINE 24233898.
Gear Oil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Popular Fits: all 2013 Escalade engines | VV820 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Daily Protection SAE 75W-90 Gear Oil1 Quart | View on Amazon |
| VALVOLINE Popular Fits: all 2013 Escalade engines | VV975 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Full Synthetic SAE 75W-90 Gear Oil1 Quart | View on Amazon |
| ACDELCO Fits: all 2013 Escalade engines | 104016 | 🇺🇸 US | 1 Quart75W-90 | View on Amazon |
| IDEMITSU Fits: 6.2L V8 | 30305075750 | 🇺🇸 US | 75W90 Gear Oil1 Quart | View on Amazon |
| VALVOLINE Fits: all 2013 Escalade engines | 889785 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Full Synthetic SAE 75W-90 Gear Oil1 Quart Flex Fill | View on Amazon |
| VALVOLINE Fits: all 2013 Escalade engines | 882505 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Full Synthetic SAE 75W-90 Gear Oil1 Gallon | View on Amazon |
| VALVOLINE Fits: all 2013 Escalade engines | 723856 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Advanced Full Synthetic SAE 75W-90 Gear Oil5 Gallon | View on Amazon |
| VALVOLINE Fits: all 2013 Escalade engines | VV822 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Daily Protection SAE 75W-90 Gear Oil16 Gallon KEG | View on Amazon |
This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle.
8 Gear Oil parts for the 2013 Cadillac Escalade come from 3 brands — VALVOLINE, ACDELCO and IDEMITSU. The "Popular" part is VALVOLINE VV820. 7 parts fit every engine; the other 1 is engine-specific.
Listed part numbers: VALVOLINE VV820, VALVOLINE VV975 and ACDELCO 104016, plus the other parts above.
Gear Oil Additive
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA15018 | 🇺🇸 US | Friction ModifierPositraction Additive | View on Amazon |
This table covers the Gear Oil additives.
This group shows a single part: USA STANDARD GEAR USA15018.
Ring Gear Spacer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTIVE GEAR Fits: all 2013 Escalade engines | 085050C | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear DifferentialGM 8.5"/8.625" | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | 085050 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Ring Gear Spacer10 Bolt | View on Amazon |
This table covers the Ring Gear spacers.
2 Ring Gear Spacer parts for the 2013 Cadillac Escalade come from MOTIVE GEAR. Every part fits both the 6.0L V8 ELECTRIC/GAS and the 6.2L V8.
Part numbers include MOTIVE GEAR 085050C and MOTIVE GEAR 085050.
Set Up Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA56045 | 🇺🇸 US | Differential Pinion set up bearingsFits HM802048 Pinion Bearing | View on Amazon |
This table covers the Set Up bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
This group shows a single part: USA STANDARD GEAR USA56045.
Shim Driver
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA56077 | 🇺🇸 US | Carrier Shim Driver Kit | View on Amazon |
This table covers the drivers used to install a shim.
This group shows a single part: USA STANDARD GEAR USA56077.
Spider Gear Thrust Washer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Fits: all 2013 Escalade engines | USA33385 | 🇺🇸 US | Pinion gear Thrust Washer | View on Amazon |
This table covers the Spider Gear Thrust washers.
One part is listed for the 2013 Cadillac Escalade — USA STANDARD GEAR USA33385.
Transfer Case Adapter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 84203235 | 🇺🇸 US 🇨🇦 CA | Fits Escalade EXT | View on Amazon |
This table covers the Transfer Case adapters.
One part is listed for the 2013 Cadillac Escalade — GM GENUINE 84203235.
Transfer Case Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 19169068 | 🇺🇸 US 🇨🇦 CA | AWDM7X40,Selftapping,No WAX | View on Amazon |
This table covers the Transfer Case bolts.
One part is listed for the 2013 Cadillac Escalade — GM GENUINE 19169068.
Transfer Case Clutch Pressure Plate
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 19133077 | 🇺🇸 US 🇨🇦 CA | Steel | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19133076 | 🇺🇸 US 🇨🇦 CA | Fits AWDSwitch Activated 2-Speed Transfer Case (NQH) | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 84184296 | 🇺🇸 US 🇨🇦 CA | Fits AWDSwitch Activated 2-Speed Transfer Case (NQH) | View on Amazon |
This table covers the Transfer Case Clutch Pressure plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts.
3 Transfer Case Clutch Pressure Plate parts for the 2013 Cadillac Escalade come from GM GENUINE.
This group includes GM GENUINE 19133077, GM GENUINE 19133076 and GM GENUINE 84184296.
Transfer Case Clutch Pressure Plate Return Spring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 19133074 | 🇺🇸 US 🇨🇦 CA | Fits AWDSwitch Activated 2-Speed Transfer Case (NQH) | View on Amazon |
This table covers the Transfer Case Clutch Pressure Plate Return springs. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.
One part is listed for the 2013 Cadillac Escalade — GM GENUINE 19133074.
Transfer Case Drive Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 19151772 | 🇺🇸 US 🇨🇦 CA | Fits Escalade EXT | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19133129 | 🇺🇸 US 🇨🇦 CA | Fits AWDSwitch Activated 2-Speed Transfer Case (NQH) | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | ZTCHHV502 | 🇺🇸 US | BW448542 Links, Pitch: 0.4346 inch, 1-1/2 inches Wide, Rocker Pin | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | ZTCHHV501 | 🇺🇸 US | MP3023Option Code NQH | View on Amazon |
This table covers the chains that drive the transfer case.
4 Transfer Case Drive Chain parts are listed for the 2013 Cadillac Escalade, from GM GENUINE and USA STANDARD GEAR. 2 parts fit every engine; the other 2 are engine-specific.
Part numbers include GM GENUINE 19151772, GM GENUINE 19133129 and USA STANDARD GEAR ZTCHHV502, among others listed above.
Transfer Case Driven Sprocket Retaining Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 19133113 | 🇺🇸 US 🇨🇦 CA | Fits AWDSingle Speed Active Transfer Case (NP0) | View on Amazon |
This table covers the Transfer Case Driven Sprocket Retaining rings.
This group shows a single part: GM GENUINE 19133113.
Transfer Case Fluid
ATF 64
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PENTOSIN Fits: 6.2L V8 | 1058113 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 1 LiterATF64 or ATF44 | View on Amazon |
| PENTOSIN Fits: 6.2L V8 | 1058215 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 5 LitersATF64 or ATF44 | View on Amazon |
Dexron
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: all 2013 Escalade engines | 109243 | 🇺🇸 US | Container Type: Plastic Container | View on Amazon |
| MOBIL Fits: all 2013 Escalade engines | 126411 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Dexron-VI ATF | View on Amazon |
| VALVOLINE Fits: all 2013 Escalade engines | 822405 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Dexron VI/Mercon LV ATF1 Quart | View on Amazon |
| VALVOLINE Fits: all 2013 Escalade engines | 883572 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Dexron VI/Mercon LV ATF1 Gallon | View on Amazon |
Multi-Vehicle
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Popular Fits: all 2013 Escalade engines | 126505 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi-Vehicle ATF | View on Amazon |
| VALVOLINE Popular Fits: all 2013 Escalade engines | VV3246 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Max Life Multi-Vehicle or Maxlife Multi-Vehicle Full Synthetic ATF1 Quart | View on Amazon |
| LUCAS OIL Fits: all 2013 Escalade engines | 11255 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LOW VISCOSITY SYNTHETIC MULTI-VEHICLE AUTOMATIC TRANSMISSION FLUID1 qt | View on Amazon |
| LUCAS OIL Fits: all 2013 Escalade engines | 18037 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Low Viscosity Synthetic Multi-Vehicle Automatic Transmission Fluid6 Gallon | View on Amazon |
| VALVOLINE Fits: all 2013 Escalade engines | 773775 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Max Life Multi-Vehicle or Maxlife Multi-Vehicle Full Synthetic ATF1 Gallon | View on Amazon |
| VALVOLINE Fits: all 2013 Escalade engines | 881051 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Maxlife Multi-Vehicle Full Synthetic ATF5 Gallon Bay Box | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Fits: all 2013 Escalade engines | 899179 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Protection Full Synthetic ATF1 Quart | View on Amazon |
This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable.
13 Transfer Case Fluid parts for the 2013 Cadillac Escalade come from 5 brands — VALVOLINE, PENTOSIN, MOBIL and 2 other brands. The "Popular" part is ACDELCO 109243. 11 parts fit every engine; the other 2 are engine-specific.
In the ATF 64 grade, PENTOSIN supplies 2 parts: grouped under the catalog's "ATF 64" designation — the notes column spells out what sets them apart. A representative part number is PENTOSIN 1058113.
The Dexron section lists 4 options from VALVOLINE, ACDELCO and MOBIL — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. ACDELCO 109243 is listed in this group.
The Multi-Vehicle section lists 6 options from VALVOLINE, LUCAS OIL and MOBIL — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. MOBIL 126505 is listed in this group.
1 further part sits outside the graded sections, with the same engine-level match.
Transfer Case Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: all 2013 Escalade engines | 917562 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FEL-PRO Popular Fits: all 2013 Escalade engines | 72770 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits with Magna 3023 Transfer Casewith Full Time 4WD | View on Amazon |
| ELRING Fits: all 2013 Escalade engines | 088130 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Number of Mounting Bores: 6 | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 86816628 | 🇺🇸 US 🇨🇦 CA | AWD | View on Amazon |
| MAHLE / CLEVITE Fits: all 2013 Escalade engines | B32793 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Paper | View on Amazon |
| SKP Fits: all 2013 Escalade engines | SK917562 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VICTOR REINZ Fits: all 2013 Escalade engines | 711410700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits 6 Boltwith Full Time 4WD | View on Amazon |
This table covers the gaskets that seal the Transfer Case. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
7 Transfer Case Gasket parts are listed for the 2013 Cadillac Escalade, from DORMAN, FEL-PRO, ELRING and 4 other brands. DORMAN 917562 carries the "Popular" badge. 6 parts fit every engine; the other 1 is engine-specific.
Listed part numbers: DORMAN 917562, FEL-PRO 72770 and ELRING 088130, plus the other parts above.
Transfer Case High / Low Clutch
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 19299093 | 🇺🇸 US 🇨🇦 CA | AWD2nd Design | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19260067 | 🇺🇸 US 🇨🇦 CA | AWD1st Design | View on Amazon |
This table covers the Transfer Case High / Low clutches. Typical signs include slip at highway speed, chatter on takeoff, or a pedal that stays low. Resurface or replace the flywheel with the clutch — a heat-checked flywheel wastes the new disc.
2 Transfer Case High / Low Clutch parts for the 2013 Cadillac Escalade come from GM GENUINE.
Part numbers include GM GENUINE 19299093 and GM GENUINE 19260067.
Transfer Case Housing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 6.2L V8 | 19133109 | 🇺🇸 US 🇨🇦 CA | Fits AWDSwitch Activated 2-Speed Transfer Case (NQH) | View on Amazon |
| GM GENUINE Popular Fits: 6.2L V8 | 19302452 | 🇺🇸 US 🇨🇦 CA | Fits RearAWD | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19302453 | 🇺🇸 US 🇨🇦 CA | RearAWD | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19133000 | 🇺🇸 US 🇨🇦 CA | Fits FrontAWD | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 84469540 | 🇺🇸 US 🇨🇦 CA | Fits FrontAWD | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 84605827 | 🇺🇸 US 🇨🇦 CA | Fits FrontAWD | View on Amazon |
This table covers the Transfer Case housings.
GM GENUINE supplies the 6 Transfer Case Housing parts for the 2013 Cadillac Escalade. GM GENUINE 19133109 carries the "Popular" badge.
Part numbers include GM GENUINE 19133109, GM GENUINE 19302452 and GM GENUINE 19302453, among others listed above.
Transfer Case Housing Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 19133165 | 🇺🇸 US 🇨🇦 CA | Fits AWDSingle Speed Active Transfer Case (NP0) | View on Amazon |
This table covers the Transfer Case Housing plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
One part is listed for the 2013 Cadillac Escalade — GM GENUINE 19133165.
Transfer Case Input Shaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 19299088 | 🇺🇸 US 🇨🇦 CA | Fits AWDEscalade Base Model | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19255997 | 🇺🇸 US 🇨🇦 CA | Fits AWDEscalade Base Model | View on Amazon |
| USA STANDARD GEAR Fits: 6.0L V8 ELECTRIC/GAS | ZTMP19132978 | 🇺🇸 US | Transfer Case Input | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | ZTBW19132803 | 🇺🇸 US | Transfer Case Input | View on Amazon |
This table covers the Transfer Case Input shafts.
4 Transfer Case Input Shaft parts for the 2013 Cadillac Escalade come from 2 brands — GM GENUINE and USA STANDARD GEAR.
Part numbers include GM GENUINE 19299088, GM GENUINE 19255997 and USA STANDARD GEAR ZTMP19132978, among others listed above.
Transfer Case Input Shaft Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Popular Fits: all 2013 Escalade engines | NB110 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits with Magna 3023 Transfer Casewith Full Time 4WD | View on Amazon |
| GM GENUINE Popular Fits: 6.2L V8 | 19133006 | 🇺🇸 US 🇨🇦 CA | Fits AWD2 Speed Manual Shaftor AWD | View on Amazon |
| NATIONAL Popular Fits: all 2013 Escalade engines | 110 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits with Magna 3023 Transfer Case2 Speedor with Magna 3010 Transfer Case | View on Amazon |
| BCA Fits: all 2013 Escalade engines | NB211 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Borg Warner 4485 Transfer Casewith Full Time 4WD | View on Amazon |
| NATIONAL Fits: all 2013 Escalade engines | 211 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | AWDwith Borg-Warner 4485 Transfer Case | View on Amazon |
| SCHAEFFLER Fits: all 2013 Escalade engines | 6210 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Borg Warner 3023,3024 Transfer Case20.00 mm Width | View on Amazon |
| SKF Fits: all 2013 Escalade engines | 6210J | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Borg Warner 3023, 3024 Transfer Case | View on Amazon |
| SKF Fits: 6.2L V8 | 6211J | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Borg Warner 4485 Transfer Case | View on Amazon |
| TIMKEN Fits: 6.2L V8 | 211TB | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 0.8268 in. Width | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | RB6010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Escalade EXT | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | RB6211 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | AWDEscalade Base Model or Escalade EXT | View on Amazon |
This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
11 Transfer Case Input Shaft Bearing parts for the 2013 Cadillac Escalade come from 7 brands — BCA, NATIONAL, SKF and 4 other brands. The "Popular" part is BCA NB110. 6 parts fit every engine; the other 5 are engine-specific.
Transfer Case Input Shaft Pilot Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: 6.2L V8 | FC66561 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits AWDwith Magna 3024 Transfer Case | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19132983 | 🇺🇸 US 🇨🇦 CA | Fits AWDSingle Speed Active Transfer Case (NP0) | View on Amazon |
| TIMKEN Fits: 6.2L V8 | BK3026 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Needle Bearing | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | WRBK3026 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits AWDEscalade Base Model | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | WRFC66561 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits AWDEscalade Base Modelor AWD | View on Amazon |
This table covers the Transfer Case Input Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
5 Transfer Case Input Shaft Pilot Bearing parts for the 2013 Cadillac Escalade come from 4 brands — WJB / INMOTION PARTS, NATIONAL, GM GENUINE and 1 other brand. The "Popular" part is NATIONAL FC66561.
Listed part numbers: NATIONAL FC66561, GM GENUINE 19132983 and TIMKEN BK3026, plus the other parts above.
Transfer Case Input Shaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: all 2013 Escalade engines | NS99189 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| NATIONAL Fits: 6.2L V8 | 99189 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits AWDEscalade Base Model | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | WS99189 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits AWDEscalade Base Model | View on Amazon |
This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface.
3 Transfer Case Input Shaft Repair Sleeve parts are listed for the 2013 Cadillac Escalade, from BCA, NATIONAL and WJB / INMOTION PARTS. 1 part fits every engine; the other 2 are engine-specific.
Listed part numbers: BCA NS99189, NATIONAL 99189 and WJB / INMOTION PARTS WS99189.
Transfer Case Input Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 6.2L V8 | 19299084 | 🇺🇸 US 🇨🇦 CA | Fits AWDEscalade Base Model | View on Amazon |
| NATIONAL Popular Fits: 6.2L V8 | 710646 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits AWDEscalade ESV or Escalade EXT | View on Amazon |
| ELRING Fits: 6.0L V8 ELECTRIC/GAS | B16870 | 🇺🇸 US 🇨🇦 CA | Material: FPM (fluoride rubber)Swirl Type: Left-hand Twist | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19132801 | 🇺🇸 US 🇨🇦 CA | Fits Escalade EXT | View on Amazon |
| NATIONAL Fits: 6.2L V8 | 710658 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | AWDwith Borg-Warner 4485 Transfer Case | View on Amazon |
| NATIONAL Fits: 6.2L V8 | 710831 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits AWDEscalade Base Model or Escalade EXT | View on Amazon |
| SKF Fits: all 2013 Escalade engines | 18531 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Borg Warner 3023, 3024 Transfer Case | View on Amazon |
| SKF Fits: 6.2L V8 | 18859A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Borg Warner 4485 Transfer Case | View on Amazon |
| TIMKEN Fits: 6.2L V8 | 710658 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | AWD | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | WS710646 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits AWDEscalade ESV or Escalade EXT | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | WS710658 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | AWDEscalade Base Model | View on Amazon |
This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
11 Transfer Case Input Shaft Seal parts are listed for the 2013 Cadillac Escalade, from NATIONAL, GM GENUINE, SKF and 3 other brands. GM GENUINE 19299084 carries the "Popular" badge. 1 part fits every engine; the other 10 are engine-specific.
Transfer Case Motor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 6.0L V8 ELECTRIC/GAS | 600899 | 🇺🇸 US 🇨🇦 CA | with RPO Code NQH (2 Speed, Switch Activated, Transfer Case) | View on Amazon |
| CARDONE Fits: 6.0L V8 ELECTRIC/GAS | 83125 | 🇺🇸 US 🇨🇦 CA | 4WDwith 2 Speed Switch-Activated Transfer Case (NQH) | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 84718571 | 🇺🇸 US 🇨🇦 CA | Fits AWDSwitch Activated 2-Speed Transfer Case (NQH) | View on Amazon |
| SKP Fits: 6.0L V8 ELECTRIC/GAS | SK600899A | 🇺🇸 US 🇨🇦 CA | with RPO Code NQH (2 Speed, Switch Activated, Transfer Case) | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: all 2013 Escalade engines | TCM110 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WAI GLOBAL Fits: 6.0L V8 ELECTRIC/GAS | TC1007 | 🇺🇸 US 🇨🇦 CA | with RPO Code NQH 2 SpeedSwitch Activated | View on Amazon |
This table covers the Transfer Case motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor.
6 Transfer Case Motor parts are listed for the 2013 Cadillac Escalade, from DORMAN, CARDONE, GM GENUINE and 3 other brands. DORMAN 600899 carries the "Popular" badge. 1 part fits every engine; the other 5 are engine-specific.
Part numbers include DORMAN 600899, CARDONE 83125 and GM GENUINE 84718571, among others listed above.
Transfer Case Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 19133162 | 🇺🇸 US 🇨🇦 CA | Fits AWD2 Speed Manual Shaftor AWD | View on Amazon |
This table covers the Transfer Case Oil drain plugs.
This group shows a single part: GM GENUINE 19133162.
Transfer Case Oil Pump
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 84888175 | 🇺🇸 US 🇨🇦 CA | Fits AWDSingle Speed Active Transfer Case (NP0) | View on Amazon |
This table covers the Transfer Case Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.
This group shows a single part: GM GENUINE 84888175.
Transfer Case Output Shaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 19133059 | 🇺🇸 US 🇨🇦 CA | Fits RearAWD | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19259180 | 🇺🇸 US 🇨🇦 CA | Fits FrontAWD | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19259181 | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
This table covers the Transfer Case Output shafts.
GM GENUINE supplies the 3 Transfer Case Output Shaft parts for the 2013 Cadillac Escalade.
Part numbers include GM GENUINE 19133059, GM GENUINE 19259180 and GM GENUINE 19259181.
Transfer Case Output Shaft Bearing
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Fits: 6.2L V8 | RB6009 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontAWD | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | RB6208N | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits RearAWD | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | RB6209N | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearAWD | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 6.2L V8 | 19133063 | 🇺🇸 US 🇨🇦 CA | Fits Rear RearwardAWD | View on Amazon |
| GM GENUINE Popular Fits: 6.2L V8 | 19133136 | 🇺🇸 US 🇨🇦 CA | Fits Front RearwardAWD | View on Amazon |
| NATIONAL Popular Fits: 6.2L V8 | 109 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontAWD | View on Amazon |
| BCA Fits: 6.2L V8 | NB109 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits FrontEscalade Base Model or Escalade EXT | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19133127 | 🇺🇸 US 🇨🇦 CA | Fits Rear RearwardAWD | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19133064 | 🇺🇸 US 🇨🇦 CA | Fits Rear RearwardAWD | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 88984506 | 🇺🇸 US 🇨🇦 CA | Fits Rear RearwardAWD | View on Amazon |
| NATIONAL Fits: 6.2L V8 | 208LO | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits RearAWD | View on Amazon |
| SKF Fits: 6.2L V8 | 91106J | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontEscalade Base Model | View on Amazon |
| SKF Fits: 6.2L V8 | 6009J | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontBorg Warner 4485 Transfer Case | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: 6.0L V8 ELECTRIC/GAS | NB109 | 🇺🇸 US 🇨🇦 CA | Frontwith Borg Warner 4485 Transfer Case | View on Amazon |
| SCHAEFFLER Fits: 6.0L V8 ELECTRIC/GAS | 6009C3 | 🇺🇸 US 🇨🇦 CA | Front16.00 mm Width | View on Amazon |
| SKF Fits: 6.0L V8 ELECTRIC/GAS | 91106J | 🇺🇸 US 🇨🇦 CA | FrontBorg Warner 3023, 3024 Transfer Case | View on Amazon |
| TIMKEN Fits: 6.2L V8 | 209LO | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear RearwardAWD | View on Amazon |
This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
17 Transfer Case Output Shaft Bearing parts are listed for the 2013 Cadillac Escalade, from GM GENUINE, WJB / INMOTION PARTS, SKF and 4 other brands. GM GENUINE 19133063 carries the "Popular" badge.
Economy: 3 parts, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS RB6009.
The Standard Replacement section: 10 options from GM GENUINE, NATIONAL, SKF and 1 other brand. GM GENUINE 19133063 is listed in this group.
4 ungrouped parts are not assigned to a grade, with the same engine-level match.
Transfer Case Output Shaft Bushing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 19168733 | 🇺🇸 US 🇨🇦 CA | Fits Escalade EXT | View on Amazon |
This table covers the Transfer Case Output Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.
One part is listed for the 2013 Cadillac Escalade — GM GENUINE 19168733.
Transfer Case Output Shaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: all 2013 Escalade engines | NS99189 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| NATIONAL Fits: 6.2L V8 | 99189 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits RearAWD | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | WS99189 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits RearAWD | View on Amazon |
This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface.
3 Transfer Case Output Shaft Repair Sleeve parts for the 2013 Cadillac Escalade come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. 1 part fits every engine; the other 2 are engine-specific.
Listed part numbers: BCA NS99189, NATIONAL 99189 and WJB / INMOTION PARTS WS99189.
Transfer Case Output Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 6.2L V8 | 84644580 | 🇺🇸 US 🇨🇦 CA | Fits FrontAWD | View on Amazon |
| NATIONAL Popular Fits: 6.2L V8 | 4503N | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearAWD | View on Amazon |
| SKF Popular Fits: all 2013 Escalade engines | 18860 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearBorg Warner 3023, 3024 Transfer Case | View on Amazon |
| TIMKEN Popular Fits: 6.2L V8 | 4503N | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearAWD | View on Amazon |
| WJB / INMOTION PARTS Popular Fits: 6.2L V8 | WS4503N | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearAWD | View on Amazon |
| BCA Fits: 6.2L V8 | NS710682 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontAWD | View on Amazon |
| BCA Fits: 6.2L V8 | NS4503N | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearEscalade ESV | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 88984501 | 🇺🇸 US 🇨🇦 CA | Fits FrontEscalade EXT | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 24233898 | 🇺🇸 US 🇨🇦 CA | Fits RearAWD | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 89059495 | 🇺🇸 US 🇨🇦 CA | Fits RearEscalade EXT | View on Amazon |
| NATIONAL Fits: 6.2L V8 | 710675 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearAWD | View on Amazon |
| NATIONAL Fits: 6.2L V8 | 710682 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontAWD | View on Amazon |
| NATIONAL Fits: 6.2L V8 | 710695 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits RearAWD | View on Amazon |
| SCHAEFFLER Fits: all 2013 Escalade engines | SS5590 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear2.2" I:D X 3.03" O.D. X 1.5" Width | View on Amazon |
| SCHAEFFLER Fits: all 2013 Escalade engines | SS2911 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 34.798 mm Widthwith Borg Warner 4485 Transfer Case | View on Amazon |
| SCHAEFFLER Fits: 6.2L V8 | SS2884 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearAWD | View on Amazon |
| SKF Fits: all 2013 Escalade engines | 17377 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontBorg Warner 3023, 3024 Transfer Case | View on Amazon |
| SKF Fits: 6.2L V8 | 17348A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontBorg Warner 4485 Transfer Case | View on Amazon |
| SKF Fits: 6.2L V8 | 21768 | 🇲🇽 MX | Rear | View on Amazon |
| USA STANDARD GEAR Fits: 6.0L V8 ELECTRIC/GAS | ZTSEA447316 | 🇺🇸 US | FrontMP3010, MP3023 & MP3024 Transfer Case SEAL 07-14 FRONT OUTPUT | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | ZTSEA1300044014 | 🇺🇸 US | Fits RearEscalade Base Model | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | WS710647 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits FrontAWD | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | WS710682 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontAWD | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | WS710695 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearAWD | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | WS710675 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearAWD | View on Amazon |
This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
25 Transfer Case Output Shaft Seal parts for the 2013 Cadillac Escalade come from 8 brands — WJB / INMOTION PARTS, GM GENUINE, NATIONAL and 5 other brands. The "Popular" part is GM GENUINE 84644580. 4 parts fit every engine; the other 21 are engine-specific.
Transfer Case Overhaul Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Fits: all 2013 Escalade engines | STCK1222 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | MP1222 Transfer Case | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | ZTBK4485 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Transfer Case Bearing and Seal Overhaul Kit | View on Amazon |
This table covers the Transfer Case Overhaul kits.
2 Transfer Case Overhaul Kit parts for the 2013 Cadillac Escalade come from 2 brands — SKF and USA STANDARD GEAR. 1 part fits every engine; the other 1 is engine-specific.
Part numbers include SKF STCK1222 and USA STANDARD GEAR ZTBK4485.
Transfer Case Planetary Carrier
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 19299090 | 🇺🇸 US 🇨🇦 CA | Fits AWDEscalade Base Model | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19210917 | 🇺🇸 US 🇨🇦 CA | Axle Shaft Spline Quantity: 38 | View on Amazon |
| USA STANDARD GEAR Fits: 6.2L V8 | ZTBW89059279 | 🇺🇸 US | Fits Escalade Base ModelBW4481, BW4482 , BW4484 & BW4485 Transfer Case FRONT & REAR DIFF CARRIER | View on Amazon |
This table covers the planetary carriers in the transfer case.
3 Transfer Case Planetary Carrier parts for the 2013 Cadillac Escalade come from 2 brands — GM GENUINE and USA STANDARD GEAR.
This group includes GM GENUINE 19299090, GM GENUINE 19210917 and USA STANDARD GEAR ZTBW89059279.
Transfer Case Range Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 84377721 | 🇺🇸 US 🇨🇦 CA | Fits AWDSwitch Activated 2-Speed Transfer Case (NQH) | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: all 2013 Escalade engines | TCA88 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WELLS Fits: all 2013 Escalade engines | 5S12117 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with 2-Speed Transfer Casewith Push Button Switch | View on Amazon |
This table covers the Transfer Case Range position sensors. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
3 Transfer Case Range Position Sensor parts for the 2013 Cadillac Escalade come from 3 brands — GM GENUINE, STANDARD MOTOR PRODUCTS and WELLS. 2 parts fit every engine; the other 1 is engine-specific.
Part numbers include GM GENUINE 84377721, STANDARD MOTOR PRODUCTS TCA88 and WELLS 5S12117.
Transfer Case Range Shift Hub
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 19133075 | 🇺🇸 US 🇨🇦 CA | AWDSingle Speed Active Transfer Case (NP0), Switch Activated 2-Speed Transfer Case (NQH) | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | ZTMP19260067 | 🇺🇸 US | MP1225/MP1226/MP1625/MP1626/MP3023/MP3024 Transfer Case, 1st Design Range Hub, 30 Tooth, Fits Both 2 and 3 piece Pad forks | View on Amazon |
This table covers the Transfer Case Range Shift hubs.
2 Transfer Case Range Shift Hub parts for the 2013 Cadillac Escalade come from 2 brands — GM GENUINE and USA STANDARD GEAR. 1 part fits every engine; the other 1 is engine-specific.
Part numbers include GM GENUINE 19133075 and USA STANDARD GEAR ZTMP19260067.
Transfer Case Shift Fork
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 19260065 | 🇺🇸 US 🇨🇦 CA | High/LowAWD | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19133031 | 🇺🇸 US 🇨🇦 CA | High/LowAWD | View on Amazon |
| USA STANDARD GEAR Fits: all 2013 Escalade engines | ZTMP19133031 | 🇺🇸 US | MP3023, MP3024, MP1625, MP1626Range Fork, High/Low Shift | View on Amazon |
This table covers the forks that move a transfer-case shift collar.
3 Transfer Case Shift Fork parts for the 2013 Cadillac Escalade come from 2 brands — GM GENUINE and USA STANDARD GEAR. 1 part fits every engine; the other 2 are engine-specific.
This group includes GM GENUINE 19260065, GM GENUINE 19133031 and USA STANDARD GEAR ZTMP19133031.
Transfer Case Shift Fork Insert
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 19133044 | 🇺🇸 US 🇨🇦 CA | Fits 2WD/4WDAWD | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19260066 | 🇺🇸 US 🇨🇦 CA | High/LowAWD | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19133033 | 🇺🇸 US 🇨🇦 CA | High/LowAWD | View on Amazon |
| USA STANDARD GEAR Fits: 6.0L V8 ELECTRIC/GAS | ZTMP302328 | 🇺🇸 US | RearMP1222, MP1225, MP1226, MP1625, MP1626, MP3023 & MP3024 | View on Amazon |
This table covers the Transfer Case Shift Fork inserts.
4 Transfer Case Shift Fork Insert parts are listed for the 2013 Cadillac Escalade, from GM GENUINE and USA STANDARD GEAR.
Listed part numbers: GM GENUINE 19133044, GM GENUINE 19260066 and GM GENUINE 19133033, plus the other parts above.
Transfer Case Shift Linkage
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 22847405 | 🇺🇸 US 🇨🇦 CA | Fits AWDEscalade Base Model | View on Amazon |
This table covers the Transfer Case Shift linkages.
One part is listed for the 2013 Cadillac Escalade — GM GENUINE 22847405.
Transfer Case Shift Mode Synchronizer Assembly
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 19133208 | 🇺🇸 US 🇨🇦 CA | AWD2 Speed Manual Shaft | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 85627201 | 🇺🇸 US 🇨🇦 CA | AWDSynchronizer Assembly | View on Amazon |
This table covers the Transfer Case Shift Mode Synchronizer assemblies.
GM GENUINE supplies both parts for the 2013 Cadillac Escalade.
Part numbers include GM GENUINE 19133208 and GM GENUINE 85627201.
Transfer Case Shift Mode Synchronizer Blocking Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 19133094 | 🇺🇸 US 🇨🇦 CA | AWD2 Speed Manual Shaft | View on Amazon |
This table covers the Transfer Case Shift Mode Synchronizer Blocking rings.
This group shows a single part: GM GENUINE 19133094.
Transfer Case Shift Mode Synchronizer Hub
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 19133093 | 🇺🇸 US 🇨🇦 CA | Fits AWDEscalade Base Model | View on Amazon |
This table covers the Transfer Case Shift Mode Synchronizer hubs.
This group shows a single part: GM GENUINE 19133093.
Transfer Case Shift Mode Synchronizer Insert
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 19133095 | 🇺🇸 US 🇨🇦 CA | AWD2 Speed Manual Shaft | View on Amazon |
This table covers the Transfer Case Shift Mode Synchronizer inserts.
This group shows a single part: GM GENUINE 19133095.
Transfer Case Shift Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: 6.2L V8 | 330385 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits AWDwith Borg-Warner 4485 Transfer Case | View on Amazon |
| BCA Fits: 6.2L V8 | NS330385 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | AWDEscalade ESV | View on Amazon |
| ELRING Fits: 6.0L V8 ELECTRIC/GAS | B16810 | 🇺🇸 US 🇨🇦 CA | Transmission Input Shaft | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19133014 | 🇺🇸 US 🇨🇦 CA | AWD2 Speed Manual Shaft | View on Amazon |
| SKF Fits: 6.0L V8 ELECTRIC/GAS | 7813 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WJB / INMOTION PARTS Fits: 6.2L V8 | WS330385 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits AWDEscalade ESV | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | WS710809 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits AWDEscalade ESV | View on Amazon |
This table covers the seals at the Transfer Case Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
7 Transfer Case Shift Shaft Seal parts are listed for the 2013 Cadillac Escalade, from WJB / INMOTION PARTS, NATIONAL, BCA and 3 other brands. NATIONAL 330385 carries the "Popular" badge.
This group includes NATIONAL 330385, BCA NS330385 and ELRING B16810 and the remaining parts above.
Transfer Case Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 19133134 | 🇺🇸 US 🇨🇦 CA | Fits DrivenAWD | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 84308646 | 🇺🇸 US 🇨🇦 CA | DriveAWD | View on Amazon |
This table covers the Transfer Case sprockets.
GM GENUINE supplies both parts for the 2013 Cadillac Escalade.
Part numbers include GM GENUINE 19133134 and GM GENUINE 84308646.
Transfer Case Thrust Washer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 6.2L V8 | 12470959 | 🇺🇸 US 🇨🇦 CA | FrontAWD | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19132995 | 🇺🇸 US 🇨🇦 CA | Fits AWDNo Tab Design | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19300746 | 🇺🇸 US 🇨🇦 CA | AWDFor 2007-2013 BK1 NQG NQH FNA X0175 Only REF TSB 12-04-21-001 Before Ordering | View on Amazon |
This table covers the Transfer Case Thrust washers.
3 Transfer Case Thrust Washer parts for the 2013 Cadillac Escalade come from GM GENUINE.
Part numbers include GM GENUINE 12470959, GM GENUINE 19132995 and GM GENUINE 19300746.
Transfer Case Vent
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 6.2L V8 | 14689 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Transmission Case Vent | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 25892279 | 🇺🇸 US 🇨🇦 CA | Vent Stem with Cap | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 19133166 | 🇺🇸 US 🇨🇦 CA | Fits AWDSingle Speed Active Transfer Case (NP0) | View on Amazon |
This table covers the vents on the transfer case.
3 Transfer Case Vent parts are listed for the 2013 Cadillac Escalade, from GM GENUINE and DORMAN. 1 part fits every engine; the other 2 are engine-specific.
This group includes DORMAN 14689, GM GENUINE 25892279 and GM GENUINE 19133166.
Universal Joint
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular Fits: all 2013 Escalade engines | 15178X | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SVLGreasable | View on Amazon |
| DANA Fits: all 2013 Escalade engines | 25178X | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer SelectGreasable | View on Amazon |
| DANA Fits: 6.2L V8 | 153147X | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SVLGreasable | View on Amazon |
| DANA Fits: 6.2L V8 | 253147X | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer SelectGreasable | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2013 Escalade engines | UJT232 | 🇺🇸 US 🇨🇦 CA | Grade Type: Performance-Bearing Greaseable | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2013 Escalade engines | UJT231 | 🇺🇸 US 🇨🇦 CA | Grade Type: Performance-Non-Greaseable | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2013 Escalade engines | UJT331 | 🇺🇸 US 🇨🇦 CA | Grade Type: STD-Greaseable | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2013 Escalade engines | UJT232A | 🇺🇸 US 🇨🇦 CA | Grade Type: Performance-Greaseable | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | UJT235 | 🇺🇸 US 🇨🇦 CA | Grade Type: Performance-Bearing Greaseable | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | UJT534G | 🇺🇸 US 🇨🇦 CA | Grade Type: STD-Greaseable | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | UJT234 | 🇺🇸 US 🇨🇦 CA | Grade Type: Performance-Non-Greaseable | View on Amazon |
Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA Popular Fits: all 2013 Escalade engines | 51350X | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer Life Series (SPL)Non-Greasable | View on Amazon |
| MOOG Popular Fits: all 2013 Escalade engines | 232A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Super StrengthGreasable | View on Amazon |
| MOOG Popular Fits: 6.2L V8 | 234 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Super StrengthNon-Greasable | View on Amazon |
| ACDELCO Fits: all 2013 Escalade engines | 45U0109 | 🇺🇸 US 🇨🇦 CA | Greasable Super Strength | View on Amazon |
| ACDELCO Fits: all 2013 Escalade engines | 45U0123 | 🇺🇸 US 🇨🇦 CA | Non-Greasable Super Strength | View on Amazon |
| DANA Fits: all 2013 Escalade engines | 51350XP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer Life Series (SPL) PlusNon-Greasable | View on Amazon |
| DANA Fits: all 2013 Escalade engines | 513501X | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer Life Series (SPL)Greasable | View on Amazon |
| DANA Fits: all 2013 Escalade engines | SPL301350XC | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer Life Series (SPL)Non-Greasable | View on Amazon |
| DANA Fits: 6.2L V8 | 5795X | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Spicer Life Series (SPL)Non-Greasable | View on Amazon |
| FVP Fits: 6.2L V8 | 2153105 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PerformanceGreasable | View on Amazon |
| GMB Fits: all 2013 Escalade engines | 2150178 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Performance GradeGreasable | View on Amazon |
| GMB Fits: 6.2L V8 | 2153105 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PerformanceGreasable | View on Amazon |
| MOOG Fits: 6.2L V8 | 231 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Super StrengthNon-Greasable | View on Amazon |
| MOOG Fits: 6.2L V8 | 235 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Super StrengthGreasable | View on Amazon |
| MOOG Fits: 6.2L V8 | 232 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Super StrengthGreasable | View on Amazon |
| MOOG Fits: 6.2L V8 | 487 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Super StrengthGreasable | View on Amazon |
| SKF Fits: all 2013 Escalade engines | UJ232A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Brute Force Greaseable | View on Amazon |
| SKF Fits: 6.2L V8 | UJ234 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Brute Force Non Greaseable | View on Amazon |
| SKF Fits: 6.2L V8 | UJ235 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Brute Force Greaseable | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GMB Popular Fits: all 2013 Escalade engines | 2100447 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Non-Greasable1.188" Bearing Cap Diameter | View on Amazon |
| GMB Popular Fits: 6.2L V8 | 2103105 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | GreasableGrease Fitting in Cross | View on Amazon |
| MOOG Popular Fits: all 2013 Escalade engines | 331A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Rear Driveshaft At Rear AxleRWD | View on Amazon |
| MOOG Popular Fits: 6.2L V8 | 534G | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Greasable | View on Amazon |
| MOOG Popular Fits: 6.2L V8 | 331 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Greasable | View on Amazon |
| SKF Popular Fits: 6.2L V8 | UJ534G | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Greaseable | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 40103777 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Front Shaftwith 1344 U-Joints | View on Amazon |
| AAM Fits: all 2013 Escalade engines | 19256728 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear ShaftRWD | View on Amazon |
| ACDELCO Fits: all 2013 Escalade engines | 45U0103 | 🇺🇸 US 🇨🇦 CA | Gold | View on Amazon |
| ACDELCO Fits: 6.2L V8 | 45U0108 | 🇺🇸 US 🇨🇦 CA | Gold | View on Amazon |
| DANA Fits: all 2013 Escalade engines | 5178X | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SpicerGreasable | View on Amazon |
| DANA Fits: 6.2L V8 | 53147X | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SpicerGreasable | View on Amazon |
| GM GENUINE Fits: all 2013 Escalade engines | 89059111 | 🇺🇸 US 🇨🇦 CA | Fits RWD4 speed Automatic trans. | View on Amazon |
| GM GENUINE Fits: 6.2L V8 | 23104840 | 🇺🇸 US 🇨🇦 CA | Fits Front Shaft All JointsEscalade EXT | View on Amazon |
| GMB Fits: all 2013 Escalade engines | 2110178 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | GreasableGrease Fitting in Cross | View on Amazon |
| SKF Fits: all 2013 Escalade engines | UJ331A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Greaseable | View on Amazon |
This table covers the U-joints in the driveshaft.
46 Universal Joint parts for the 2013 Cadillac Escalade come from 9 brands — DANA, MOOG, WJB / INMOTION PARTS and 6 other brands. The "Popular" part is DANA 15178X. They are grouped as Economy, Heavy Duty and Standard Replacement, with Heavy Duty the largest group at 19 parts from MOOG, DANA, SKF and 3 other brands.
Universal Joint Strap Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: all 2013 Escalade engines | 81001 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Shaft All Joints1.125" Diameter Bearing Cap | View on Amazon |
| MOOG Popular Fits: all 2013 Escalade engines | 49210 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearRWD | View on Amazon |
| MOOG Popular Fits: 6.2L V8 | 53010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontAWD | View on Amazon |
| SKF Popular Fits: 6.2L V8 | UJ53010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Front Driveshaft At Front AxleAWD | View on Amazon |
| ACDELCO Fits: 6.2L V8 | 45U0505 | 🇺🇸 US 🇨🇦 CA | Gold | View on Amazon |
| DORMAN Fits: all 2013 Escalade engines | 13862 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear Driveshaft At Rear Axlewith 30 mm U-Joint Bearing Cap | View on Amazon |
| SKF Fits: all 2013 Escalade engines | UJ49210 | 🇺🇸 US | Fits FrontRWD | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2013 Escalade engines | UJT33110 | 🇺🇸 US 🇨🇦 CA | Rear Shaft All Joints0.75" Bolt Length | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2013 Escalade engines | UJT49210 | 🇺🇸 US 🇨🇦 CA | Rear Shaft All Joints1.50" Bolt Length | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.2L V8 | UJT53010 | 🇺🇸 US 🇨🇦 CA | Front Shaft All JointsOE Series: Mechanics 3R Half-Round | View on Amazon |
This table covers the Universal Joint Strap kits.
10 Universal Joint Strap Kit parts for the 2013 Cadillac Escalade come from 5 brands — WJB / INMOTION PARTS, DORMAN, MOOG and 2 other brands. The "Popular" part is DORMAN 81001. 6 parts fit every engine; the other 4 are engine-specific.
Universal Joint U-Bolt Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP Fits: all 2013 Escalade engines | 2600178 | 🇺🇸 US | 1.188" Bearing Cap DiameterOutside Lock Rings | View on Amazon |
| GMB Fits: all 2013 Escalade engines | 2600178 | 🇺🇸 US | 1.188" Bearing Cap DiameterOutside Lock Rings | View on Amazon |
| MOTIVE GEAR Fits: all 2013 Escalade engines | MGUB3R | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Competition Yoke U-BoltIncl. Longer Chromoly U-Bolts/Grade 8 Bolts | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2013 Escalade engines | UJT33010 | 🇺🇸 US 🇨🇦 CA | Rear Shaft All JointsOE Series: Spicer 1350/1410 Half-Round | View on Amazon |
This table covers the Universal Joint U-Bolt kits.
4 Universal Joint U-Bolt Kit parts are listed for the 2013 Cadillac Escalade, from FVP, GMB, MOTIVE GEAR and 1 other brand. All of them fit every engine offered in the 2013 Escalade.
Part numbers include FVP 2600178 and MOTIVE GEAR MGUB3R, among others listed above.
Buying Drivetrain Parts for a 2013 Cadillac Escalade
On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.
- Match the engine first. Some drivetrain parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Differential Pinion Bearing / Race and Differential Rebuild Kit .
Frequently Asked Questions
How many drivetrain parts fit the 2013 Cadillac Escalade?
Our catalog currently lists 846 drivetrain parts for the 2013 Cadillac Escalade across 120 subcategories and 47 brands, covering both the 6.0L V8 ELECTRIC/GAS and the 6.2L V8. Each part is matched to the engine(s) it fits.
Do drivetrain parts differ between 2013 Cadillac Escalade engines?
Some do. 491 parts fit every engine; the other 355 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of drivetrain problems on a 2013 Cadillac Escalade?
Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2013 Cadillac Escalade was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2013 Cadillac Escalade?
First match the engine — each row shows which engine(s) the part fits. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2013 Cadillac Escalade
Drivetrain Parts for Other Cadillac Escalade Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.