1948 Checker A2 Cooling System Parts

Engine:
3.7L 226cid L6

9 Cooling system parts are listed for the 1948 Checker A2, in 2 part types, covering the 3.7L 226cid L6 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 1948 Checker A2, the cooling system system keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses. All 9 listed parts are Coolant / Antifreeze (8 parts) and Thermostat / Thermostat Housing / Water Outlet Seal (1 part).

Coolant / Antifreeze

Economy

Brand Part Number Markets Notes Buy
VALVOLINE 719009
🇺🇸 US
Multi-Vehicle Yellow1 Gallon
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
FVP Popular GREEN5050GAL
🇺🇸 US
Low Silicate Blend1 Gallon
Fitment notes — FVP GREEN5050GAL
Low Silicate Blend1 GallonGreenIAT
View on
Amazon
PRESTONE Popular AF3300
🇺🇸 US
Prime Conventional Green 1 Gallon
View on
Amazon
FVP FMGRN5050GL
🇺🇸 US
Green Antifreeze+CoolantConventional Low Silcate
Fitment notes — FVP FMGRN5050GL
Green Antifreeze+CoolantConventional Low Silcate1 GallonReady to Use
View on
Amazon
FVP FVPGREENGAL
🇺🇸 US
Green Antifreeze+CoolantConventional Low Silcate
Fitment notes — FVP FVPGREENGAL
Green Antifreeze+CoolantConventional Low Silcate1 Gallon
View on
Amazon
Brand Part Number Markets Notes Buy
FVP FMGRN5050GLF
🇺🇸 US
Green Antifreeze+CoolantConventional Low Silcate
Fitment notes — FVP FMGRN5050GLF
Green Antifreeze+CoolantConventional Low Silcate1 GallonReady to Use
View on
Amazon
FVP FVPGREENGALF
🇺🇸 US
Green Antifreeze+CoolantConventional Low Silcate
Fitment notes — FVP FVPGREENGALF
Green Antifreeze+CoolantConventional Low Silcate1 Gallon
View on
Amazon
FVP GREEN55GALF
🇺🇸 US
Low Silicate Concentrate 1/55 GAL
View on
Amazon

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator.

Thermostat / Thermostat Housing / Water Outlet Seal

Brand Part Number Markets Notes Buy
FEL-PRO 1273
🇺🇸 US
Water Outlet Seal
View on
Amazon

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Cooling System Parts for a 1948 Checker A2

On this vehicle, the cooling system system keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses.

  • Confirm you have the 3.7L 226cid L6 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Coolant / Antifreeze and Thermostat / Thermostat Housing / Water Outlet Seal .

Frequently Asked Questions

How many cooling system parts fit the 1948 Checker A2?

Our catalog currently lists 9 cooling system parts for the 1948 Checker A2 across 2 subcategories and 4 brands, covering the 3.7L 226cid L6 engine. Each part is matched to the engine(s) it fits.

What are the signs of cooling system problems on a 1948 Checker A2?

Common symptoms include a rising temperature gauge in traffic, sweet-smelling steam, crusty deposits around hose clamps, or a heater that blows cold. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1948 Checker A2 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1948 Checker A2?

Every part on this page is matched to the 3.7L 226cid L6 engine. Then replace coolant with the exact specification the manufacturer calls for — mixing chemistries can gel and block small passages. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1948 Checker A2

Cooling System Parts for Other Checker A2 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.