1965 Checker Aerobus Automatic Transmission Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

23 Automatic transmission parts are listed for the 1965 Checker Aerobus, in 13 part types, covering all 4 engine options (3.8L 230cid L6, 4.6L 283cid V8, 5.2L 318cid V8 and 5.3L 327cid V8). Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 1965 Checker Aerobus, the automatic transmission covers the automatic gearbox and its supporting cast — filters, coolers, solenoids, mounts and torque-converter parts. Most of the listed parts are Fluid Pump Seal (4 parts), Extension Housing Seal (3 parts) and Fluid Pan Gasket (3 parts). The other 10 part types cover the remaining 13 parts.

Dipstick / Fluid Filler Tube Seal

Brand Part Number Markets Notes Buy
ATP Fits: 5.2L 318cid V8 JO16
🇺🇸 US
Intake Filler Tube To CaseElectrical Connector
View on
Amazon
PIONEER Fits: 5.2L 318cid V8 762008
🇺🇸 US
Intake Filler Tube To CaseElectrical Connector
View on
Amazon

This table covers the seals at the Dipstick / Fluid Filler Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Extension Housing Seal

Brand Part Number Markets Notes Buy
BCA Fits: 5.2L 318cid V8 NS473234
🇺🇸 US
View on
Amazon
NATIONAL Fits: 5.2L 318cid V8 473234
🇺🇸 US
Borg Warner Trans.
View on
Amazon
WJB / INMOTION PARTS Fits: 5.2L 318cid V8 WS473234
🇺🇸 US
Borg Warner trans.T12 Transmission
View on
Amazon

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Fluid Pan Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 5.2L 318cid V8 TOS18106
🇺🇸 US
View on
Amazon
MAHLE / CLEVITE Fits: 5.2L 318cid V8 W38987
🇺🇸 US
Cork-RubberAutomatic Transmission Oil Pan Gasket
Fitment notes — MAHLE / CLEVITE W38987
Cork-RubberAutomatic Transmission Oil Pan Gasket
Borg Warner, Cruise-O-Matic ( LD, MD), Flash-O-Matic, Merc-O-Matic, 3-speed Transmissions with 14 Bolt Holes
View on
Amazon
VICTOR REINZ Fits: 5.2L 318cid V8 711496800
🇺🇸 US
14 Bolt
View on
Amazon

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Fluid Pump Repair Sleeve

Brand Part Number Markets Notes Buy
WJB / INMOTION PARTS Fits: 5.2L 318cid V8 WS99193
🇺🇸 US
FrontBorg Warner trans.
Fitment notes — WJB / INMOTION PARTS WS99193
FrontBorg Warner trans.T12 Transmission
View on
Amazon

This table covers the precision wear sleeves used to restore a transmission pump seal surface.

Fluid Pump Seal

Brand Part Number Markets Notes Buy
BCA Fits: 5.2L 318cid V8 NS6988H
🇺🇸 US
Front
View on
Amazon
NATIONAL Fits: 5.2L 318cid V8 6988H
🇺🇸 US
FrontBorg Warner Trans.
View on
Amazon
SKF Fits: 5.2L 318cid V8 19240
🇺🇸 US
Front
View on
Amazon
WJB / INMOTION PARTS Fits: 5.2L 318cid V8 WS6988H
🇺🇸 US
FrontBorg Warner trans.
Fitment notes — WJB / INMOTION PARTS WS6988H
FrontBorg Warner trans.T12 Transmission
View on
Amazon

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Manual Shaft Seal

Brand Part Number Markets Notes Buy
NATIONAL Fits: 5.2L 318cid V8 7929S
🇺🇸 US
Borg Warner Trans.
View on
Amazon
WJB / INMOTION PARTS Fits: 5.2L 318cid V8 WS7929S
🇺🇸 US
Borg Warner trans.T12 Transmission
View on
Amazon

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

O-Rings & Seals

Brand Part Number Markets Notes Buy
SCHAEFFLER Fits: 5.2L 318cid V8 SS2611
🇺🇸 US
Rearwith 1.563 In Shaft
Fitment notes — SCHAEFFLER SS2611
Rearwith 1.563 In Shaft12.7 mm Width
View on
Amazon

This table covers the O-rings and seals at this joint.

Output Shaft Bearing

Brand Part Number Markets Notes Buy
SKF Fits: 5.2L 318cid V8 6307NRJ
🇺🇸 US
Rear
View on
Amazon

This table covers the Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Output Shaft Seal

Brand Part Number Markets Notes Buy
SKF Fits: 5.2L 318cid V8 15620
🇺🇸 US
Rear
View on
Amazon

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Repair Sleeve

Brand Part Number Markets Notes Buy
SKF Fits: 5.2L 318cid V8 99193
🇺🇸 US
Shaft Diameter: 1.937 In
Fitment notes — SKF 99193
Shaft Diameter: 1.937 In
Front
View on
Amazon

This table covers the wear sleeves used to restore a grooved seal surface.

Shift Shaft Repair Sleeve

Brand Part Number Markets Notes Buy
SKF Fits: 5.2L 318cid V8 99076
🇺🇸 US
Shaft Diameter: 0.750 In
View on
Amazon

This table covers the wear sleeves used to restore a Shift Shaft seal surface.

Shift Shaft Seal

Brand Part Number Markets Notes Buy
SCHAEFFLER Fits: 5.2L 318cid V8 SS3644
🇺🇸 US
with 0.750 In Shaft
View on
Amazon
SKF Fits: 5.2L 318cid V8 7556
🇺🇸 US
View on
Amazon

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Torque Converter Repair Sleeve

Brand Part Number Markets Notes Buy
SCHAEFFLER Fits: 5.2L 318cid V8 SR3509
🇺🇸 US
with 1.938 In Shaft17.48 mm Width
Fitment notes — SCHAEFFLER SR3509
with 1.938 In Shaft17.48 mm Widthwith Dual Lip
View on
Amazon

This table covers the wear sleeves used to restore a Torque Converter seal surface.

Buying Automatic Transmission Parts for a 1965 Checker Aerobus

On this vehicle, the automatic transmission covers the automatic gearbox and its supporting cast — filters, coolers, solenoids, mounts and torque-converter parts.

  • Match the engine first. Every automatic transmission part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the filter and pan gasket with every fluid service, and flush the cooler lines when replacing a failed unit.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Fluid Pump Seal and Extension Housing Seal .

Frequently Asked Questions

How many automatic transmission parts fit the 1965 Checker Aerobus?

Our catalog currently lists 23 automatic transmission parts for the 1965 Checker Aerobus across 13 subcategories and 10 brands, covering all 4 engine options (3.8L 230cid L6, 4.6L 283cid V8, 5.2L 318cid V8 and 5.3L 327cid V8). Each part is matched to the engine(s) it fits.

Do automatic transmission parts differ between 1965 Checker Aerobus engines?

Yes. Every automatic transmission part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of automatic transmission problems on a 1965 Checker Aerobus?

Common symptoms include delayed or harsh engagement, slipping under load, fluid that smells burnt, or shuddering at light throttle around 40 mph. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the filter and pan gasket with every fluid service, and flush the cooler lines when replacing a failed unit.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1965 Checker Aerobus was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1965 Checker Aerobus?

First match the engine — each row shows which engine(s) the part fits. Then use exactly the fluid specification in the notes — automatic transmissions are the least forgiving component on the vehicle about fluid choice. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1965 Checker Aerobus

Automatic Transmission Parts for Other Checker Aerobus Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.