The 2018 Chevrolet Beat has 7 steering parts with verified fitment on this page — 3 part types and 5 brands, covering the 1.2L L4 engine. Each part includes a manufacturer part number and application notes.
On the 2018 Chevrolet Beat, the steering system connects driver to road through the rack, pump, tie rods, and column components. All 7 listed parts are Tie Rod End (4 parts), Rack and Pinion (2 parts) and Power Steering Fluid (1 part).
The 2018 Chevrolet Beat came with a single engine, the 1.2L L4, and every part is verified against it.
5 brands supply steering parts for the 2018 Chevrolet Beat, led by DORMAN (2 parts), FVP (2 parts) and EDELMANN (1 part), plus 2 more brands.
Each part number listed for the 2018 Chevrolet Beat opens a page with every vehicle that part fits.
Power Steering Fluid
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| EDELMANN | 70694 | 🇲🇽 MX | Quart | View on Amazon |
This table covers the fluids specified for this steering system. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable.
This group shows a single part: EDELMANN 70694.
Rack and Pinion
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LARES | 23574 | 🇲🇽 MX | Electronic Power Steering with Manual Rack | View on Amazon |
| TOP NOTCH | TNG10036 | 🇲🇽 MX | New | View on Amazon |
This table covers the steering gear assemblies that turn the tie rods. Typical signs include fluid at a torn boot, a growl when you turn, or play that the inner tie rods do not explain. Flush the old power-steering fluid with the rack — grit in the old fluid is the usual cause of a repeat leak.
2 Rack and Pinion parts are listed for the 2018 Chevrolet Beat, from LARES and TOP NOTCH.
This group includes LARES 23574 and TOP NOTCH TNG10036.
Tie Rod End
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 543442 | 🇲🇽 MX | Front Inner | View on Amazon |
| DORMAN | 544157 | 🇲🇽 MX | Front Outer | View on Amazon |
| FVP | TI55100 | 🇲🇽 MX | Front Inner | View on Amazon |
| FVP | TO55085 | 🇲🇽 MX | Front Outer | View on Amazon |
This table covers the inner and outer tie-rod ends that steer each front knuckle. Typical signs include play on center, a feathered front tire, or a boot that has split and packed with grit. Replace inner and outer ends together on a high-mileage axle, then get an alignment.
4 Tie Rod End parts for the 2018 Chevrolet Beat come from 2 brands — DORMAN and FVP.
This group includes DORMAN 543442, DORMAN 544157 and FVP TI55100 and the remaining parts above.
Buying Steering Parts for a 2018 Chevrolet Beat
On this vehicle, the steering system connects driver to road through the rack, pump, tie rods, and column components.
- Confirm you have the 1.2L L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Tie Rod End and Rack and Pinion .
Frequently Asked Questions
How many steering parts fit the 2018 Chevrolet Beat?
Our catalog currently lists 7 steering parts for the 2018 Chevrolet Beat across 3 subcategories and 5 brands, covering the 1.2L L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of steering problems on a 2018 Chevrolet Beat?
Common symptoms include play or looseness on center, a whine when turning, fluid weeping from rack boots, or uneven tire wear on the front axle. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2018 Chevrolet Beat was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2018 Chevrolet Beat?
Every part on this page is matched to the 1.2L L4 engine. Then flush old power-steering fluid when replacing a pump or rack — grit in the old fluid is the number-one cause of repeat failure. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2018 Chevrolet Beat
Steering Parts for Other Chevrolet Beat Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.